2018 journal article
Construction of a Compact Low-Cost Radiation Shield for Air-Temperature Sensors in Ecological Field Studies
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS, (141).
author keywords: Environmental Sciences; Issue 141; Air temperature; climate change; data logger; thermochron; radiation shield; field studies
MeSH headings : Ecosystem; Humans; Radiation Protection / methods; Temperature
TL;DR:
A detailed methodology for constructing a compact version of a previously described custom fabricated radiation shield, which is more accurate than other published shielding methods that attempt to minimize shield size or construction costs is provided.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
11. Sustainable Cities and Communities
(Web of Science)
13. Climate Action
(Web of Science)
Source: Web Of Science
Added: February 11, 2019
Low cost temperature sensors are increasingly used by ecologists to assess climatic variation and change on ecologically relevant scales. Although cost-effective, if not deployed with proper solar radiation shielding, the observations recorded from these sensors will be biased and inaccurate. Manufactured radiation shields are effective at minimizing this bias, but are expensive compared to the cost of these sensors. Here, we provide a detailed methodology for constructing a compact version of a previously described custom fabricated radiation shield, which is more accurate than other published shielding methods that attempt to minimize shield size or construction costs. The method requires very little material: corrugated plastic sheets, aluminum foil duct tape, and cable ties. One 15 cm and two 10 cm squares of corrugated plastic are used for each shield. After cutting, scoring, taping and stapling of the sheets, the 10 cm squares form the bottom two layers of the solar radiation shield, while the 15 cm square forms the top layer. The three sheets are held together with cable ties. This compact solar radiation shield can be suspended, or placed against any flat surface. Care must be taken to ensure that the shield is completely parallel to the ground to prevent direct solar radiation from reaching the sensor, possibly causing increased warm biases in sun-exposed sites in the morning and afternoon relative to the original, larger design. Even so, differences in recorded temperatures between the smaller, compact shield design and the original design were small (mean daytime bias = 0.06 °C). Construction costs are less than half of the original shield design, and the new design results in a less conspicuous instrument that may be advantageous in many field ecology settings.