2007 journal article

A tribo-testing method for high performance cold forging lubricants

Wear, 262, 684–692.

By: G. Ngaile n, S. Hiroyuki, L. Ruan* & Y. Marumo*

co-author countries: Japan 🇯🇵 United States of America 🇺🇸
author keywords: tribo-testing; lubricants; cold forging; surface evolution
Source: Web Of Science
Added: August 6, 2018

A tribo-testing method based on inducing different deformation patterns at the tool–workpiece interface developed by the authors was used in rating the performance of high quality lubricants. Dies which can induce different levels of maximum surface expansion under localized rod drawing set up were used. The maximum local surface expansion induced ranged from 20 to 500%. The basic feature for this test lies under the assumption that the surface expansion is proportional to the lubricant thinning and breakdown at the tool–workpiece interface. The experimental set up is coupled with die heating facilities used to raise the temperature at the interface so that the influence of temperature on the performance of the lubricant is studied. The performance of several coating-based lubricants was studies under this method. One of the goals of screening the lubricant was to identify possible lubricant candidates for replacing zinc phosphate coating based lubricant for medium forging processes. The results have demonstrated that, the effectiveness of the lubricants varies considerably with changes in the maximum local surface expansion induced at the interface and the change in the interface temperature. Of the six lubricants studied, two lubricants based on calcium and sodium soap were found to be at the same performance level as the conventional zinc phosphate coating + metal soap.