Paul Cohen

Works (22)

Updated: April 4th, 2024 13:10

2020 journal article

Automating the Search and Discovery of Manufacturing Service Providers to Enable a Digital Supply Chain Network

SMART AND SUSTAINABLE MANUFACTURING SYSTEMS, 4(3), 276–280.

By: B. Starly n , P. Cohen n  & S. Raman*

author keywords: coronavirus disease; manufacturing search engine optimization; schema.org vocabulary extensions; blockchain
TL;DR: This technical note outlines solution pathways that can help ease the search and discovery process of connecting clients and manufacturing service providers through digitally enabled technologies. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: January 4, 2021

2019 article

Provisioned Data Distribution for Intelligent Manufacturing via Fog Computing

47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47), Vol. 34, pp. 893–902.

By: R. Sherlekar n, B. Starly n  & P. Cohen n 

author keywords: Fog Computing; MTConnect Industry 4.0; IIoT; Industrial Cyber-Physical Systems; Big Data; Digital Manufacturing; Data Distribution
TL;DR: This paper proposes a decentralized data distribution architecture to democratize the potential availability of large amounts of data generated by the manufacturing industry using the Fog Computing paradigm, and demonstrates a data-centric approach which allows peer-to-peer data sharing laterally within the fog layer to serve cloud users. (via Semantic Scholar)
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: September 7, 2020

2018 journal article

Characterization and Modeling of Catalyst-free Carbon-Assisted Synthesis of ZnO Nanowires

JOURNAL OF MANUFACTURING PROCESSES, 32, 438–444.

By: X. Kong, C. Wei, Y. Zhu n, P. Cohen*  & J. Dong* 

Contributors: X. Kong, C. Wei, Y. Zhu n, P. Cohen*  & J. Dong* 

author keywords: ZnO nanowire synthesis; chemical vapor deposition (CVD); process modeling
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2018 journal article

Development and Characterization of Ultrasonic Vibration Assisted Nanomachining Process for Three-Dimensional Nanofabrication

IEEE TRANSACTIONS ON NANOTECHNOLOGY, 17(3), 559–566.

By: J. Deng *, J. Dong n  & P. Cohen n 

Contributors: J. Deng *, J. Dong n  & P. Cohen n 

author keywords: 3-D Nanomachining; tip-based nanofabrication; atomic force microscope (AFM); ultrasonic vibration assisted nanomachining
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2018 journal article

Modeling of Catalyst-free Growth Process of ZnO Nanowires

Procedia Manufacturing, 26, 349–358.

By: X. Kong n, C. Wei n, Y. Zhu n, P. Cohen n  & J. Dong n 

Contributors: X. Kong n, C. Wei n, Y. Zhu n, P. Cohen n  & J. Dong n 

author keywords: ZnO nanowire synthesis; chemical vapor deposition (CVD); process modeling
UN Sustainable Development Goal Categories
Sources: Crossref, NC State University Libraries, ORCID
Added: January 19, 2020

2018 journal article

Rapid Fabrication and Characterization of SERS Substrates

Procedia Manufacturing, 26, 580–586.

By: J. Deng *, J. Dong n  & P. Cohen n 

Contributors: J. Deng *, J. Dong n  & P. Cohen n 

author keywords: AFM-based nanofabrication; SERS substrates; ultrasonic vibration assisted nanomachining
UN Sustainable Development Goal Categories
Sources: Crossref, NC State University Libraries, ORCID
Added: February 24, 2020

2018 journal article

Reverse auction mechanism design for the acquisition of prototyping services in a manufacturing-as-a-service marketplace

JOURNAL OF MANUFACTURING SYSTEMS, 48, 134–143.

By: D. Pahwa n, B. Starly n  & P. Cohen n 

author keywords: Distributed manufacturing; Reverse auction; Mechanism design; Name Your Own Price (TM)
UN Sustainable Development Goal Categories
10. Reduced Inequalities (Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: November 5, 2018

2017 journal article

A flexible data schema and system architecture for the virtualization of manufacturing machines (VMM)

Journal of Manufacturing Systems, 45, 236–247.

By: A. Angrish n, B. Starly n , Y. Lee n  & P. Cohen n 

author keywords: Cyber-physical manufacturing; Smart manufacturing; Digital twins; MongoDB; NoSQL
TL;DR: This paper describes how streaming data can be stored in a scalable and flexible document schema based database such as MongoDB, a data store that makes up the virtual twin system that results in the virtualization of a machine resource to external factory manufacturing systems. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Crossref, NC State University Libraries
Added: September 13, 2019

2017 journal article

Modeling of the dynamic machining force of vibration-assisted nanomachining process

Journal of Manufacturing Processes, 28, 101–108.

By: X. Kong n, J. Dong n  & P. Cohen n 

Contributors: X. Kong n, J. Dong n  & P. Cohen n 

UN Sustainable Development Goal Categories
Sources: NC State University Libraries, NC State University Libraries, ORCID
Added: August 6, 2018

2017 journal article

Particle learning in online tool wear diagnosis and prognosis

JOURNAL OF MANUFACTURING PROCESSES, 28, 457–463.

By: J. Zhang n, B. Starly n , Y. Cai n, P. Cohen n  & Y. Lee n 

author keywords: Particle learning; Tool wear; Intelligent manufacturing; Remaining useful life (RUL)
TL;DR: A probabilistic method based on a Particle Learning (PL) approach by building a linear system transition function whose parameters are updated through online in-process observations of the machining process to avoid developing a complex closed form formulation for a specific tool wear model. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2017 journal article

Sensor Data and Information Fusion to Construct Digital-twins Virtual Machine Tools for Cyber-physical Manufacturing

Procedia Manufacturing, 10, 1031–1042.

By: Y. Cai  n, B. Starly n , P. Cohen n  & Y. Lee n 

author keywords: virtual machine tool; sensory data; data acquisition; information fusion; cyber-physical manufacturing; digital manufacturing
TL;DR: Techniques are discussed for deploying sensors to capture machine-specific features, and analytical techniques of data and information fusion are presented for modeling and developing “digital-twins” virtual machine tools. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Crossref, NC State University Libraries
Added: January 25, 2020

2017 journal article

Streaming Machine Generated Data to Enable a Third-Party Ecosystem of Digital Manufacturing Apps

Procedia Manufacturing, 10, 1020–1030.

By: S. Singh n, A. Angrish n, J. Barkley, B. Starly n , Y. Lee n  & P. Cohen n 

author keywords: Digital Manufacturing; MTCONNECT; PostgreSQL; Digital Manufacturing Commons (DMC)
TL;DR: This proposed architecture enables an ecosystem of smart manufacturing applications to be built and deployed on the shop-floor through open-sourced software and hardware devices thereby reducing cost of manufacturing software development. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Crossref, NC State University Libraries
Added: January 25, 2020

2016 journal article

AFM-based 3D nanofabrication using ultrasonic vibration assisted nanomachining

JOURNAL OF MANUFACTURING PROCESSES, 24, 195–202.

By: J. Deng n, L. Zhang n, J. Dong n  & P. Cohen n 

Contributors: J. Deng n, L. Zhang n, J. Dong n  & P. Cohen n 

author keywords: 3D nanomachining; Atomic force microscope (AFM); Tip-based nanofabrication; Ultrasonic vibration assisted nanomachining
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2016 article

High Rate 3D Nanofabrication by AFM-Based Ultrasonic Vibration Assisted Nanomachining

44TH NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 44, Vol. 5, pp. 1283–1294.

By: J. Deng n, J. Dong n , P. Cohen n , A. Shih & L. Wang

Contributors: J. Deng n, J. Dong n , P. Cohen n , A. Shih & L. Wang

author keywords: 3D nanomachining; Tip-based nanofabrication; Atomic Force Microscope (AFM); Ultrasonic vibration Assisted Nanomachining
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2016 article

Predictive modeling of feature dimension for tip-based nano machining process

Kong, X., Cohen, P. H., & Dong, J. (2016, October). JOURNAL OF MANUFACTURING PROCESSES, Vol. 24, pp. 338–345.

By: X. Kong n, P. Cohen n  & J. Dong n 

Contributors: X. Kong n, P. Cohen n  & J. Dong n 

author keywords: Nanofabrication; Tip-based nano machining; Modeling of feature dimension
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2015 article

AFM-based 3D Nanofabrication using Ultrasonic Vibration Assisted Nanomachining

43RD NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 43, Vol. 1, pp. 584–592.

By: J. Deng n, L. Zhang n, J. Dong n , P. Cohen n , A. Shih & L. Wang

Contributors: J. Deng n, L. Zhang n, J. Dong n , P. Cohen n , A. Shih & L. Wang

author keywords: 3D nanomachining; Atomic force microscope (AFM); Tip-based nanofabrication; Ultrasonic vibration
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2015 conference paper

Machining force modeling of vibration-assisted nano-machining process

Proceedings of the ASME 10th International Manufacturing Science and Engineering Conference, 2015, vol 2.

By: X. Kong n, L. Zhang n, J. Dong n  & P. Cohen n 

UN Sustainable Development Goal Categories
Sources: Crossref, NC State University Libraries
Added: August 6, 2018

2015 journal article

Manufacturing Road Map for Tissue Engineering and Regenerative Medicine Technologies

STEM CELLS TRANSLATIONAL MEDICINE, 4(2), 130–135.

By: J. Hunsberger *, O. Harrysson n , R. Shirwaiker  n, B. Starly n , R. Wysk n, P. Cohen n , J. Allickson*, J. Yoo *, A. Atala *

Contributors: J. Hunsberger *, O. Harrysson n , R. Shirwaiker n , B. Starly n , R. Wysk n, P. Cohen n , J. Allickson*, J. Yoo *, A. Atala *

MeSH headings : Biological Specimen Banks; Drug Industry / methods; Drug Industry / organization & administration; Humans; Regenerative Medicine / methods; Regenerative Medicine / organization & administration; Tissue Engineering / methods; Translational Research, Biomedical / methods; Translational Research, Biomedical / organization & administration
TL;DR: A road map for developing the manufacturing infrastructure, resources, standards, capabilities, education, training, and workforce development to realize the promise of TERM is outlined. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2013 journal article

Material-Insensitive Feature Depth Control and Machining Force Reduction by Ultrasonic Vibration in AFM-Based Nanomachining

IEEE TRANSACTIONS ON NANOTECHNOLOGY, 12(5), 743–750.

By: L. Zhang n, J. Dong n  & P. Cohen n 

Contributors: L. Zhang n, J. Dong n  & P. Cohen n 

author keywords: Atomic force microscope (AFM); nanomachining; tip-based nanofabrication; ultrasonic vibration
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2013 review

Nanomaterials and synergistic low-intensity direct current (LIDC) stimulation technology for orthopedic implantable medical devices

[Review of ]. WILEY INTERDISCIPLINARY REVIEWS-NANOMEDICINE AND NANOBIOTECHNOLOGY, 5(3), 191–204.

By: R. Shirwaiker n , M. Samberg n, P. Cohen n , R. Wysk n & N. Monteiro-Riviere n 

Contributors: R. Shirwaiker n , M. Samberg n, P. Cohen n , R. Wysk n & N. Monteiro-Riviere n 

MeSH headings : Animals; Electric Stimulation / methods; Equipment and Supplies; Humans; Nanostructures / therapeutic use; Nanostructures / ultrastructure; Nanotechnology / methods; Orthopedics; Prostheses and Implants
TL;DR: While many nanomaterials have clearly demonstrated their ability to provide more effective implantable medical surfaces, further decisive investigations are necessary before they can translate into medically safe and commercially viable clinical applications. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2009 journal article

Experimental investigation of the machining induced residual stress tensor under mechanical loading

Journal of Manufacturing Processes, 11(2), 88–96.

By: W. Fu *, P. Cohen n  & C. Ruud*

Sources: Crossref, NC State University Libraries
Added: August 28, 2020

2008 journal article

Focused ion beam irradiation effects on nanoscale freestanding thin films

JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 18(9).

By: M. Samayoa n, M. Haque * & P. Cohen n 

Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.