Moe Pourghaz

Critical Bending Strain and Mechanical Properties of Corroded Reinforcing Bars

ACI MATERIALS JOURNAL, 120(2), 77–86.

Investigating the use of electrical capacitance tomography to image rapid transient moisture flow through cracks in concrete

CEMENT & CONCRETE COMPOSITES, 140.

A new monitoring approach for sustainability assessment of subsurface utilities gasket materials against gasoline and chlorinated solvents: Field evaluation and model development

Journal of Environmental Management, 323, 116217.

Diffusion of benzene and tetrachloroethylene through saturated cement paste

Construction and Building Materials, 329, 127196.

Does ITZ Influence Moisture Transport in Concrete?

Dalton, L. E., LaManna, J. M., Jones, S., & Pour-Ghaz, M. (2022, July 24). TRANSPORT IN POROUS MEDIA.

Quantifying moisture damage in asphalt concrete using axisymmetric flexural vibration technique

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 23(3), 523–535.

Supercritical, liquid, and gas CO2 reactive transport and carbonate formation in portland cement mortar

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL, 116.

Assessment of Mitigation Measures against Benzene Breakthrough into Subsurface Concrete Pipe

JOURNAL OF PIPELINE SYSTEMS ENGINEERING AND PRACTICE, 12(1).

Deep learning surrogate interacting Markov chain Monte Carlo based full wave inversion scheme for properties of materials quantification

JOURNAL OF SOUND AND VIBRATION, 497.

Effects of MgSO4 on Calcium-Silicate-Hydrate

Advances in Civil Engineering Materials, 10(1), 20210013.

Factors Affecting Multiphase Benzene Breakthrough into Drainage Concrete Pipe in the Unsaturated Subsurface Profile

JOURNAL OF PIPELINE SYSTEMS ENGINEERING AND PRACTICE, 12(3).

Imaging of reactive transport in fractured cement-based materials with X-ray CT

CEMENT & CONCRETE COMPOSITES, 124.

Measurement of heat release during hydration and carbonation of ash disposed in landfills using an isothermal calorimeter

Waste Management, 124, 348–355.

Nonplanar sensing skins for structural health monitoring based on electrical resistance tomography

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, 36(12), 1488–1507.

Abrasion Resistance of Concrete Exposed to Organic Acids

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 32(8).

Degradation Model for the Tensile Strength of PVC and Rubber Gasket Materials Exposed to Benzene and PCE-Saturated Aqueous Solutions

TRANSPORTATION RESEARCH RECORD, 2674(2), 274–283.

Retrieval of the saturated hydraulic conductivity of cement-based materials using electrical capacitance tomography

CEMENT & CONCRETE COMPOSITES, 112.

The Effect of Gas Solubility on the Secondary Sorption in a Portland Cement Mortar Observed by X-ray CT

TRANSPORT IN POROUS MEDIA, 133(3), 397–411.

Another Look at the Abrasion Resistance of Concrete

ADVANCES IN CIVIL ENGINEERING MATERIALS, 8(1), 423–434.

Durability of CFRP strands used for prestressing of concrete structural members

CONSTRUCTION AND BUILDING MATERIALS, 228.

Numerical simulation and experimental corroboration of galvanic corrosion of mild steel in synthetic concrete pore solution

CEMENT & CONCRETE COMPOSITES, 103, 263–278.

Three-dimensional electrical capacitance tomography - A tool for characterizing moisture transport properties of cement-based materials

MATERIALS & DESIGN, 181.

Detection and reconstruction of complex structural cracking patterns with electrical imaging

NDT & E INTERNATIONAL, 99, 123–133.

Imaging of two-dimensional unsaturated moisture flows in uncracked and cracked cement-based materials using electrical capacitance tomography

Materials and Structures, 51(3).

Quantifying prestressing force loss due to corrosion from dynamic structural response

JOURNAL OF SOUND AND VIBRATION, 433, 129–137.

What is the role of water in the geopolymerization of metakaolin?

CONSTRUCTION AND BUILDING MATERIALS, 182, 360–370.

A functionally layered sensing skin for the detection of corrosive elements and cracking

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 16(2), 215–224.

Can Electrical Resistance Tomography be used for imaging unsaturated moisture flow in cement-based materials with discrete cracks?

CEMENT AND CONCRETE RESEARCH, 91, 61–72.

Can the dual-permeability model be used to simulate unsaturated moisture flow in damaged mortar and concrete?

International Journal of Advances in Engineering Sciences and Applied Mathematics, 9(2), 54–66.

Detection and localization of changes in two-dimensional temperature distributions by electrical resistance tomography

SMART MATERIALS AND STRUCTURES, 26(11).

Performance and damage evolution of plain and fibre-reinforced segmental concrete pipelines subjected to transverse permanent ground displacement

Structure and Infrastructure Engineering, 14(2), 232–246.

A comparison of methods to evaluate mass transport in damaged mortar

CEMENT & CONCRETE COMPOSITES, 70, 119–129.

Do mechanical and environmental loading have a synergistic effect on the degradation of pultruded glass fiber reinforced polymers?

COMPOSITES PART B-ENGINEERING, 106, 344–355.

Electrical capacitance tomography to monitor unsaturated moisture ingress in cement-based materials

CEMENT AND CONCRETE RESEARCH, 89, 158–167.

Modeling water absorption in concrete and mortar with distributed damage

Construction & Building Materials, 125, 438–449.

Quantitative electrical imaging of three-dimensional moisture flow in cement-based materials

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 103, 1348–1358.

The Consequences of Material Nonlinearity on the Axisymmetric Flexural Vibration Measurements for Estimating the Dynamic Elastic Modulus of Damaged Cement Based Materials

JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 14(6), 287–298.

Three-Dimensional Electrical Impedance Tomography to Monitor Unsaturated Moisture Ingress in Cement-Based Materials

TRANSPORT IN POROUS MEDIA, 115(1), 101–124.

Using neutron radiography to assess water absorption in air entrained mortar

CONSTRUCTION AND BUILDING MATERIALS, 110, 98–105.

Effect of Damage on Moisture Transport in Concrete

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 27(9).

Electrical impedance tomography-based sensing skin for structural health monitoring

Structural health monitoring 2015: system reliability for verification and implementation, vols. 1 and 2, 3081–3088.

Electrical resistance tomography to monitor unsaturated moisture flow in cementitious materials

CEMENT AND CONCRETE RESEARCH, 69, 10–18.

Estimating the mechanical properties of layered media using ultrasonics: Numerical study with high resolution wave propagation

Structural health monitoring 2015: system reliability for verification and implementation, vols. 1 and 2, 2559–2566.

A new sensing skin for qualitative damage detection in concrete elements: Rapid difference imaging with electrical resistance tomography

NDT & E INTERNATIONAL, 68, 13–21.

Electrical impedance tomography-based sensing skin for quantitative imaging of damage in concrete

SMART MATERIALS AND STRUCTURES, 23(8).

The Influence of Pore Solutions Properties on Drying in Cementitious Materials

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 97(2), 386–393.

Wireless Crack Detection in Concrete Elements Using Conductive Surface Sensors and Radio Frequency Identification Technology

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 26(5), 923–929.

Sustainable Infrastructure Materials: Challenges and Opportunities

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 10(4), 584–592.

Assessment of the Behavior of Buried Concrete Pipelines Subjected to Ground Rupture: Experimental Study

Journal of Pipeline Systems Engineering and Practice, 3(1), 8–16.

Characterizing Lightweight Aggregate Desorption at High Relative Humidities Using a Pressure Plate Apparatus

Journal of Materials in Civil Engineering, 24(8), 961–969.

Water Absorption and Critical Degree of Saturation Relating to Freeze-Thaw Damage in Concrete Pavement Joints

JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 24(3), 299–307.

A Simple Soil-Structure Interaction Model for Indirect Damage Assessment of Segmented Concrete Pipelines during PGD

Pipelines 2011. Presented at the Pipelines Conference 2011, Seattle, Washington.

Application of Frequency Selective Circuits for Crack Detection in Concrete Elements

Journal of ASTM International, 8(10), 103826.

Damage Detection and Health Monitoring of Buried Segmental Concrete Pipes

Geo-Frontiers 2011, 1743–1752.

Detecting the time and location of cracks using electrically conductive surfaces

Cement and Concrete Composites, 33(1), 116–123.

Experimental Methods to Detect and Quantify Damage in Restrained Concrete Ring Specimens

JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 9(3), 251–260.

Restrained Shrinkage Cracking in Concrete Elements: Role of Substrate Bond on Crack Development

Journal of Materials in Civil Engineering, 23(6), 895–902.

Using electrical, magnetic and acoustic sensors to detect damage in segmental concrete pipes subjected to permanent ground displacement

Cement and Concrete Composites, 33(7), 749–762.

Wetting and drying of concrete using aqueous solutions containing deicing salts

Cement and Concrete Composites, 33(5), 535–542.

Quantitative Interpretation of Half-Cell Potential Measurements in Concrete Structures

Journal of Materials in Civil Engineering, 21(9), 467–475.

The effect of temperature on the corrosion of steel in concrete. Part 1: Simulated polarization resistance tests and model development

Corrosion Science, 51(2), 415–425.

The effect of temperature on the corrosion of steel in concrete. Part 2: Model verification and parametric study

Corrosion Science, 51(2), 426–433.

A practical method for calculating the corrosion rate of uniformly depassivated reinforcing bars in concrete

Materials and Corrosion, 58(4), 265–272.

Experimental verification and application of a practical corrosion model for uniformly depassivated steel in concrete

Materials and Structures, 41(7), 1211–1223.

Virtual Experiments to Investigate Steel Corrosion in Concrete

Computing in Civil Engineering (2007). Presented at the International Workshop on Computing in Civil Engineering 2007.