Works (30)
Updated: April 8th, 2024 05:00
2024 journal article
Influence of Spatter on Porosity, Microstructure, and Corrosion of Additively Manufactured Stainless Steel Printed Using Different Island Size
Crystals.
www.mdpi.com (publisher PDF)
Source: ORCID
Added: April 1, 2024
2023 article
1.5 MW CW RF Loads for Gyrotrons
21ST JOINT WORKSHOP ON ELECTRON CYCLOTRON EMISSION AND ELECTRON CYCLOTRON RESONANCE HEATING, EC21, Vol. 277.
Sources: Web Of Science, NC State University Libraries
Added: July 19, 2023
2023 article
Microstructure and Elevated Temperature Flexure Testing of Tungsten Produced by Electron Beam Additive Manufacturing
Zhang, H., Carriere, P. R., Amoako, E. D., Rock, C. D., Thielk, S. U., Fletcher, C. G., & Horn, T. J. (2023, August 30). JOM, Vol. 8.
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: October 23, 2023
2023 journal article
Microstructure development and properties of micro-alloyed copper, Cu-0.3Zr-0.15Ag, produced by electron beam additive manufacturing
Materials Characterization, 197, 112675.
author keywords: Electron beam powder bed fusion; Copper; Copper alloy; Zirconia; Ziconium
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries, Crossref
Added: February 22, 2023
2022 article
Laser Powder Bed Fusion of ODS 14YWT from Gas Atomization Reaction Synthesis Precursor Powders
Saptarshi, S., DeJong, M., Rock, C., Anderson, I., Napolitano, R., Forrester, J., … Horn, T. (2022, August 2). JOM, Vol. 8.
Contributors: S. Saptarshi n, M. deJong n, C. Rock n , I. Anderson *, R. Napolitano*, J. Forrester n, S. Lapidus *, D. Kaoumi n , n
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 29, 2022
2022 journal article
Laser powder bed fusion additive manufacturing of oxide dispersion strengthened steel using gas atomized reaction synthesis powder
MATERIALS & DESIGN, 216.
Contributors: n , C. Rock n , D. Kaoumi n , I. Anderson *, E. White *, T. Prost*, J. Rieken*, S. Saptarshi n
Sources: Web Of Science, NC State University Libraries, ORCID
Added: February 20, 2023
2022 journal article
No ball milling nee de d: Alternative ODS steel manufacturing with gas atomization reaction synthesis (GARS) and friction-based processing
JOURNAL OF NUCLEAR MATERIALS, 566.
author keywords: ODS Steel; Gas Atomization Reaction Synthesis; Friction Consolidation and Extrusion; Electron Microscopy; Atom Probe Tomography
Sources: Web Of Science, NC State University Libraries
Added: June 20, 2022
2021 journal article
Additive manufacturing of ZrB2-ZrSi2 ultra-high temperature ceramic composites using an electron beam melting process
CERAMICS INTERNATIONAL, 47(2), 2397–2405.
author keywords: Additive manufacturing; Electron beam melting; Composites; Borides
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: March 15, 2021
2021 journal article
Characterization of copper & stainless steel interface produced by electron beam powder bed fusion
Characterization of copper & stainless steel interface produced by electron beam powder bed fusion. MATERIALS & DESIGN, 212.
author keywords: Additive manufacturing; Cu; Bimetallic; Miscibility gap; Liquid phase separation; Interface
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: December 20, 2021
2021 journal article
Electron Beam Melting of Niobium Alloys from Blended Powders
MATERIALS, 14(19).
author keywords: niobium; tungsten; zirconium; high-strength metal alloys; plasma spheroidization; additive manufacturing
TL;DR:
A custom electron beam powder bed fusion machine was used to demonstrate the processability of blended niobium-based tungsten alloys, with resulting solid optical densities of 99+%.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: November 8, 2021
2021 journal article
Processing of tungsten through electron beam melting *
JOURNAL OF NUCLEAR MATERIALS, 555.
author keywords: Additive manufacturing; Pure tungsten; Electron beam melting; Refractory metal
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: August 30, 2021
2021 journal article
Quasi-Static Tensile Properties of Unalloyed Copper Produced by Electron Beam Powder Bed Fusion Additive Manufacturing
MATERIALS, 14(11).
author keywords: electron beam; powder bed fusion; copper; post-process; mechanical property; microstructure
TL;DR:
Overall, for the post-process parameters chosen in this study, HIP was observed to slightly increase the sample’s density while vacuum annealing reduced the oxygen content in the specimens.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: June 21, 2021
2021 journal article
The Influence of Powder Reuse on the Properties of Nickel Super Alloy ATI 718 (TM) in Laser Powder Bed Fusion Additive Manufacturing
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 52(2), 676–688.
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: February 8, 2021
2020 article
Additive Manufacture of RF Loads for ITER
2020 IEEE 21ST INTERNATIONAL CONFERENCE ON VACUUM ELECTRONICS (IVEC 2020), pp. 143–144.
author keywords: gyrotron; electron cyclotron heating; tokamak; plasma heating; RF load; waterload
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: October 26, 2021
2020 journal article
Additive Manufacturing of Pure Mo and Mo plus TiC MMC Alloy by Electron Beam Powder Bed Fusion
JOM, 72(12), 4202–4213.
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: November 24, 2020
2020 journal article
Analysis of Self-Organized Patterned Surface Oxide Spots on Ejected Spatter Produced during Laser Powder Bed Fusion
Additive Manufacturing, 35, 101320.
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: October 26, 2020
2020 article
Design and Test of Copper Printed RF Cavities
2020 IEEE 21ST INTERNATIONAL CONFERENCE ON VACUUM ELECTRONICS (IVEC 2020), pp. 149–150.
author keywords: RF cavities; additive manufacturing; oxygen free high-conductivity copper; design for additive manufacturing
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: October 26, 2021
2020 journal article
Evaluation of Structural Anisotropy in a Porous Titanium Medium Mimicking Trabecular Bone Structure Using Mode-Converted Ultrasonic Scattering
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 67(5), 1017–1024.
author keywords: Bones; Anisotropic magnetoresistance; Acoustics; Scattering; Ultrasonic variables measurement; Ultrasonic imaging; Transducers; Anisotropy; metal additive manufacturing; mode conversion; trabecular bone; ultrasound scattering
MeSH headings : Algorithms; Animals; Anisotropy; Cancellous Bone / diagnostic imaging; Cancellous Bone / physiology; Horses; Image Processing, Computer-Assisted / methods; Models, Biological; Phantoms, Imaging; Porosity; Titanium / chemistry; Ultrasonography / instrumentation; Ultrasonography / methods
TL;DR:
The mode-converted (longitudinal to transverse, L-T) ultrasonic scattering method was utilized to characterize the structural anisotropy of a phantom mimicking the structural properties of trabecular bone, suggesting the potential of mode- Converts to assess the anisotropic of materials with porous, complex structures, including trabECular bone.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
5. Gender Equality
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: May 26, 2020
2020 journal article
Real time monitoring of electron emissions during electron beam powder bed fusion for arbitrary geometries and toolpaths
ADDITIVE MANUFACTURING, 34.
author keywords: Real-time control; Electron beam; In-situ monitoring; Defect detection; Backscatter
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: August 24, 2020
2019 journal article
Characteristics and Processing of Hydrogen-Treated Copper Powders for EB-PBF Additive Manufacturing
APPLIED SCIENCES-BASEL, 9(19).
author keywords: electron beam melting; copper; hydrogen treatment; high purity copper
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: December 2, 2019
2019 journal article
Processing of Alnico Magnets by Additive Manufacturing
APPLIED SCIENCES-BASEL, 9(22).
author keywords: additive manufacturing; permanent magnets; alnico
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
12. Responsible Consumption and Production
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: January 6, 2020
2018 journal article
Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness
APPLIED MATERIALS TODAY, 11, 264–269.
author keywords: Additive manufacturing; Amorphous metal; Bulk metallic glass; Fe; Direct metal laser sintering
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2018 conference paper
Additively manufactured WR-10 copper waveguide
2018 ieee international vacuum electronics conference (ivec), 409–410.
Sources: NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2017 conference paper
Additive vacuum electronics electron beam melting of copper
2017 eighteenth international vacuum electronics conference (ivec).
Sources: NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2017 journal article
Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing
JOM, 69(3), 472–478.
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2017 journal article
Evaluation of 3D Additively Manufactured Canine Brain Models for Teaching Veterinary Neuroanatomy
JOURNAL OF VETERINARY MEDICAL EDUCATION, 44(4), 612–619.
author keywords: gross anatomy education; neuroanatomy; 3D additive manufacturing; physical models; veterinary students; propensity score matching
MeSH headings : Anatomy, Veterinary / education; Animals; Brain / anatomy & histology; Clinical Competence; Dogs / anatomy & histology; Education, Veterinary; Plastic Embedding; Printing, Three-Dimensional; Program Evaluation; Surveys and Questionnaires
TL;DR:
It is postulate that 3D AM canine brain models are an acceptable alternative to plastinated specimens in teaching veterinary neuroanatomy.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
4. Quality Education
(Web of Science; OpenAlex)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018
2016 journal article
Multi-sample Arabidopsis Growth and Imaging Chamber (MAGIC) for long term imaging in the ZEISS Lightsheet Z.1
Developmental Biology, 419(1), 19–25.
author keywords: Arabidopsis root; Light sheet; 3D printing; Time-lapse imaging
MeSH headings : Arabidopsis / ultrastructure; Arabidopsis Proteins / analysis; Cell Division; Computer-Aided Design; Cyclin B / analysis; Equipment Design; Green Fluorescent Proteins / analysis; Image Processing, Computer-Assisted / methods; Microscopy, Fluorescence / instrumentation; Microscopy, Fluorescence / methods; Plant Roots / ultrastructure; Printing, Three-Dimensional; Recombinant Fusion Proteins / analysis; Time-Lapse Imaging / instrumentation; Time-Lapse Imaging / methods
TL;DR:
A Multi-sample Arabidopsis Growth and Imaging Chamber (MAGIC) is developed that provides near-physiological imaging conditions and allows high-throughput time-course imaging experiments in the ZEISS Lightsheet Z.1, and its imaging capabilities are illustrated by following cell divisions, as an indicator of plant growth and development, over prolonged time periods.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
2. Zero Hunger
(Web of Science)
13. Climate Action
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2015 journal article
Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery
JOM, 67(3), 647–654.
TL;DR:
This review describes and discusses current and potential applications of metal additive manufacturing in veterinary orthopedic surgery.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2014 journal article
Development of a patient-specific bone analog for the biomechanical evaluation of custom implants
RAPID PROTOTYPING JOURNAL, 20(1), 41–49.
author keywords: Biomechanical testing; Rapid tooling; Bone analog; Custom implant; Mechanical properties of bone
TL;DR:
An improved experimental substrate for the mechanical testing of patient-specific implants fabricated using direct metal additive manufacturing processes is described, which reduces variability and sample size requirements and addresses the importance of geometry at the bone/implant interface.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2014 journal article
Fabricating copper components with electron beam melting
Advanced Materials & Processes, 172(7), 20–24.
Source: NC State University Libraries
Added: August 6, 2018
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.
