Srinath V Ekkad

Effects of Variable Pressure Outlets for Array Jet Impingement Cooling With a Bidirectional Exit Air Scheme

ASME JOURNAL OF HEAT AND MASS TRANSFER, 145(11).

Numerical study of heat transfer enhancement over a rotating surface. Part I: Effect of pin-fin shapes

Numerical Heat Transfer, Part A: Applications, 5, 1–20.

Recent advancements in single-phase liquid-based heat transfer in microchannels

In J. P. Abraham, J. M. Gorman, & W. J. Minkowycz (Eds.), Advances in Heat Transfer (Vol. 55, pp. 239–293).

A new technique using background oriented schlieren for temperature reconstruction of an axisymmetric open reactive flow

MEASUREMENT SCIENCE AND TECHNOLOGY, 33(5).

Effect of Pin Fins on Jet Impingement Heat Transfer Over a Rotating Disk

Journal of Heat Transfer, 144(4).

Effect of Rotation on Heat Transfer in AR = 2:1 and AR = 4:1 Channels Connected by a Series of Crossover Jets

Journal of Turbomachinery, 144(6).

Effect of Spanwise Hole-to-Hole Spacing on Overall Cooling Effectiveness of Effusion Cooled Combustor Liners for a Swirl-Stabilized Can Combustor

Journal of Turbomachinery, 144(7).

Temperature reconstruction of an axisymmetric enclosed reactive flow using simultaneous background oriented schlieren and infrared thermography

MEASUREMENT SCIENCE AND TECHNOLOGY, 33(11).

A Modern Review on Jet Impingement Heat Transfer Methods

Journal of Heat Transfer, 143(6).

A numerical parametric study to enhance thermal hydraulic performance of a novel alternating offset oblique microchannel

Numerical Heat Transfer, Part A: Applications, 79(7), 489–512.

Characterization of Transient Wall Heat Load for a Low NOx Lean Premixed Swirl Stabilized Can Combustor Under Reacting Conditions

Journal of Thermal Science and Engineering Applications, 14(2).

Detailed Heat Transfer Measurements for Rotating Turbulent Flows in Gas Turbine Systems

[Review of ]. ENERGIES, 14(1).

Effect of channel aspect ratio and fin geometry on fluid flow and heat transfer performance of sectional oblique fin microchannels

PROCEEDINGS OF THE TWENTIETH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS (ITHERM 2021), pp. 42–51.

Enhanced fin-effectiveness of micro-scale concentric-shape roughened target surface subjected to array jet impingement

International Journal of Heat and Mass Transfer, 173, 121148.

Forced convection cooling of additively manufactured single and double layer enhanced microchannels

International Journal of Heat and Mass Transfer, 168, 120881.

Heat Transfer Enhancement Through Array Jet Impingement on Strategically Placed High Porosity High Pore-Density Thin Copper Foams

Journal of Electronic Packaging, 143(3).

Liquid Crystal Thermography in Gas Turbine Heat Transfer: A Review on Measurement Techniques and Recent Investigations

Crystals, 11(11), 1332.

Overall Cooling Effectiveness of Effusion Cooled Can Combustor Liner Under Reacting and Non-Reacting Conditions

Journal of Thermal Science and Engineering Applications, 14(2).

A skin layer made of cured polysilazane and yttria stabilized zirconia for enhanced thermal protection of carbon fiber reinforced polymers (CFRPs)

Surface and Coatings Technology, 404, 126481.

Array Jet Impingement on High Porosity Thin Metal Foams: Effect of Foam Height, Pore-Density, and Spent Air Crossflow Scheme on Flow Distribution and Heat Transfer

Journal of Heat Transfer, 142(11).

Enhanced thermal hydraulic performance by V-shaped protrusion for gas turbine blade trailing edge cooling

International Journal of Heat and Mass Transfer, 149, 119221.

Evaluation of Additively Manufactured Single-Pass and Two-Pass Enhanced Microchannel Heat Sinks

InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM, 2020-July, 38–47.

Experimental and Numerical Study of Chord-Wise Eight-Passage Serpentine Cooling Design for Eliminating the Coriolis Force Adverse Effect on Heat Transfer

Journal of Thermal Science and Engineering Applications, 13(1).

Multifunctional Ceramic Composite System for Simultaneous Thermal Protection and Electromagnetic Interference Shielding for Carbon Fiber-Reinforced Polymer Composites

ACS Applied Materials & Interfaces, 12(52), 58005–58017.

Parallel rotation for negating Coriolis force effect on heat transfer

The Aeronautical Journal, 124(1274), 581–596.

Professor Satish G. Kandlikar on His 70th Birthday

Journal of Thermal Science and Engineering Applications, 12(6).

Thermal Hydraulic Performance of High Porosity High Pore Density Thin Copper Foams Subject to Array Jet Impingement

InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM, 2020-July, 15–22.

Thermal-Hydraulic Performance Enhancement by the Combination of Rectangular Winglet Pair and V-Shaped Dimples

Journal of Thermal Science and Engineering Applications, 12(2).

Three-Dimensional Transient Heat Conduction Equation Solution for Accurate Determination of Heat Transfer Coefficient

Journal of Heat Transfer, 142(5).

Air-based cooling in high porosity, aluminum foams for compact electronics cooling

InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, ITHERM, 2019-May, 376–383.

Comparison of different combustion liner cooling techniques under non-reacting conditions for a lean premixed fuel nozzle

AIAA Scitech 2019 Forum.

Effect of blade profile on four-passage serpentine configuration designed to negate coriolis effect on heat and fluid flow

Proceedings of the ASME Turbo Expo, 5A-2019.

Effect of micro-roughness shapes on jet impingement heat transfer and fin-effectiveness

International Journal of Heat and Mass Transfer, 132, 80–95.

Effect of pore density on jet impingement onto thin metal foams under intermediate crossflow scheme

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8.

Effect of twist ratio on heat transfer enhancement by swirl impingement

ASME 2019 Heat Transfer Summer Conference, HT 2019, collocated with the ASME 2019 13th International Conference on Energy Sustainability.

Experimental investigation of crossflow diverters in jet impingement cooling

ASME 2019 Heat Transfer Summer Conference, HT 2019, collocated with the ASME 2019 13th International Conference on Energy Sustainability.

Gas turbine combustor liner wall heat load characterization for different gaseous fuels

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8.

Impingement heat transfer of various lobe-shaped nozzles

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8.

Jet Impingement Heat Transfer Enhancement by Packing High-Porosity Thin Metal Foams Between Jet Exit Plane and Target Surface

Journal of Thermal Science and Engineering Applications, 11(6).

Jet Impingement Heat Transfer Enhancement by U-Shaped Crossflow Diverters

Journal of Thermal Science and Engineering Applications, 12(4).

Multi-Pass Serpentine Cooling Designs for Negating Coriolis Force Effect on Heat Transfer: Smooth Channels

Journal of Turbomachinery, 141(7).

Multipass Serpentine Cooling Designs for Negating Coriolis Force Effect on Heat Transfer: 45-deg Angled Rib Turbulated Channels

Journal of Turbomachinery, 141(7).

Professor Bengt Sundén on his 70th Birthday

International Journal of Heat and Mass Transfer, 141, 1315–1317.

Rib Turbulator Heat Transfer Enhancements at Very High Reynolds Numbers

Journal of Thermal Science and Engineering Applications, 11(6).

Thermal hydraulic performance augmentation by high-porosity thin aluminum foams placed in high aspect ratio ducts

Applied Thermal Engineering, 161, 114162.

Three-dimensional transient heat conduction equation solution for accurate quantification of heat transfer coefficient in transient liquid crystal experiments

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8.

An eight-passage serpentine design for negating coriolis force effect on heat transfer

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8B-2018.

Characterization of heat load on the liner walls during near blowout instabilities

AIAA Aerospace Sciences Meeting, 2018, (210059).

Detailed Heat Transfer Measurements of Jet Impingement on Dimpled Target Surface Under Rotation

Journal of Thermal Science and Engineering Applications, 10(3).

Effect of Longitudinal Vortex Generator Location on Thermoelectric-Hydraulic Performance of a Single-Stage Integrated Thermoelectric Power Generator

Journal of Thermal Science and Engineering Applications, 10(5).

Effect of nozzle-to-target spacing on fin effectiveness and convective heat transfer coefficient for array jet impingement onto novel micro-roughness structures

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8A-2018.

Effects of reacting conditions on flow fields in a swirl stabilized lean premixed can combustor

Proceedings of the ASME Turbo Expo, 4B-2018.

Experimental Investigation of Rotational Effects on Heat Transfer Enhancement Due to Crossflow-Induced Swirl Using Transient Liquid Crystal Thermography

Journal of Thermal Science and Engineering Applications, 10(3).

Experimental and numerical investigation of heat and fluid flow in a square duct featuring criss-cross rib patterns

Applied Thermal Engineering, 128, 415–425.

Experimental investigation of heat transfer enhancement through array jet impingement on various configurations of high porosity thin metal foams

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8B-2018.

Flow Field and Wall Temperature Measurements for Reacting Flow in a Lean Premixed Swirl Stabilized Can Combustor

Journal of Engineering for Gas Turbines and Power, 140(9).

Flow temperature measurement on a lean premixed swirl stablized combustor under reacting condition

AIAA Aerospace Sciences Meeting, 2018, (210059).

Fuel interchangeability effects on the lean blowout for a lean premixed swirl stabilized fuel nozzle

Proceedings of the ASME Turbo Expo, 4B-2018.

High porosity and high pore density thin copper foams for compact electronics cooling

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8B-2018.

Multi-pass serpentine cooling designs for negating coriolis force effect on heat transfer: 45-degree angled rib turbulated channels

Proceedings of the ASME Turbo Expo, 5A-2018.

Multi-pass serpentine cooling designs for negating coriolis force effect on heat transfer: Smooth channels

Proceedings of the ASME Turbo Expo, 5A-2018.

Thermal Management of a Transonic Turbine: Leakage Flow and Endwall Contouring Effects

Journal of Thermophysics and Heat Transfer, 32(4), 1031–1044.

Three-tier impingement cooling design for gas turbine blade trailing edge

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8B-2018.

A new cooling design for rib roughened two-pass channel having positive effects of rotation on heat transfer enhancement on both pressure and suction side internal walls of a gas turbine blade

International Journal of Heat and Mass Transfer, 115, 6–20.

A transient liquid crystal image technique for local heat transfer distributions near a sharp 180° turn of a two-pass smooth square channel

Journal of Flow Visualization and Image Processing, 24(1-4), 127–140.

Application of proper orthogonal decomposition to high speed imaging for the study of combustion oscillations

Proceedings of the ASME Turbo Expo, Part F130041-4B.

Characterization of heat transfer enhancement and frictional losses in a two-pass square duct featuring unique combinations of rib turbulators and cylindrical dimples

International Journal of Heat and Mass Transfer, 106, 629–647.

Effect of crossflow regulation by varying jet diameters in streamwise direction on jet impingement heat transfer under maximum crossflow condition

Numerical Heat Transfer, Part A: Applications, 72(8), 579–599.

Effects of spent air removal scheme on internal-side heat transfer in an impingement-effusion system at low jet-to-target plate spacing

International Journal of Heat and Mass Transfer, 108, 998–1010.

Experimental and numerical investigation of heat transfer inside two-pass rib roughened duct (AR = 1:2) under rotating and stationary conditions

International Journal of Heat and Mass Transfer, 113, 384–398.

Experimental based empirical model of the initial onset of sand deposits on hastelloy-X from 1000°C to 1100°C using particle tracking

Proceedings of the ASME Turbo Expo, 2D-2017.

Experimental investigation of rotating rib roughened two-pass square duct with two different channel orientations

Proceedings of the ASME Turbo Expo, 5A-2017.

Experimental investigation of the onset of sand deposits on Hastelloy-X between 1,000°C and 1,100°C

The Aeronautical Journal, 121(1242), 1187–1199.

Experimental study of heat transfer augmentation in a two-pass channel featuring V-shaped ribs and cylindrical dimples

Applied Thermal Engineering, 116, 205–216.

Film Cooling Performance of Tripod Antivortex Injection Holes Over the Pressure and Suction Surfaces of a Nozzle Guide Vane

Journal of Thermal Science and Engineering Applications, 9(2).

Flow field and wall temperature measurements for reacting flow in a lean premixed swirl stabilized can combustor

Proceedings of the ASME Turbo Expo, 5C-2017.

Heat Transfer Measurements inside Narrow Channels with Ribs and Trenches

Heat Transfer Engineering, 39(9), 750–759.

Heat Transfer Performance of a Transonic Turbine Blade Passage in the Presence of Leakage Flow Through Upstream Slot and Mateface Gap With Endwall Contouring

Journal of Turbomachinery, 139(12).

Heat transfer enhancement by criss-cross pattern formed by 45° Angled rib turbulators in a straight square duct

ASME 2017 Heat Transfer Summer Conference, HT 2017, 1.

Investigation of isothermal convective heat transfer in an optical combustor with a low-emissions swirl fuel nozzle

Applied Thermal Engineering, 114, 65–76.

Isothermal coherent structures and turbulent flow produced by a gas turbine combustor lean pre-mixed swirl fuel nozzle

Experimental Thermal and Fluid Science, 81, 187–201.

Numerical & experimental investigations for flow fields under non-reacting & reacting conditions through a lean premixed fuel nozzle

Proceedings of the ASME Turbo Expo, 5C-2017.

Numerical investigation of scoop effect on film cooling for cylindrical inclined hole

ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 8.

Numerical investigation of turbulent flow and heat transfer in two-pass ribbed channels

International Journal of Thermal Sciences, 112, 31–43.

Numerical study on thermoelectric–hydraulic performance of a thermoelectric power generator with a plate-fin heat exchanger with longitudinal vortex generators

Applied Energy, 185, 1343–1354.

A Diagnostic Technique for Particle Characterization Using Laser Light Extinction

Journal of Engineering for Gas Turbines and Power, 138(11).

Analysis of film cooling performance of advanced tripod hole geometries with and without manufacturing features

International Journal of Heat and Mass Transfer, 94, 9–19.

Analysis on impact of turbulence parameters and swirl angle variation on isothermal gas turbine combustor flows

ASME 2016 Heat Transfer Summer Conference, HT 2016, collocated with the ASME 2016 Fluids Engineering Division Summer Meeting and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels, 2.

Effect of Endwall Contouring on a Transonic Turbine Blade Passage: Heat Transfer Performance

Journal of Turbomachinery, 139(1).

Effects of rotation on heat transfer due to jet impingement on cylindrical dimpled target surface

Proceedings of the ASME Turbo Expo, 5B-2016.

Experimental and numerical study of heat transfer due to developing flow in a two-pass rib roughened square duct

International Journal of Heat and Mass Transfer, 102, 1245–1256.

Experimental investigation of heat transfer augmentation by different jet impingement hole shapes under maximum crossflow

Proceedings of the ASME Turbo Expo, 5B-2016.

Gas turbine combustor rig development and initial observations at cold and reacting flow conditions

Proceedings of the ASME Turbo Expo, 5B-2016.

Heat Transfer Optimization for Thermoelectric Power Generation with Automobile Waste Heat Recovery Applications

Annual Review of Heat Transfer, 19(1), 241–277.

Preliminary experimental investigation of initial onset of sand deposition in the turbine section of gas turbines

Proceedings of the ASME Turbo Expo, 1.

Sensitivity of different impingement structures to rotation

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 37(1), 37–40. http://www.scopus.com/inward/record.url?eid=2-s2.0-84964686315&partnerID=MN8TOARS

A Novel Transient Technique to Determine Recovery Temperature, Heat Transfer Coefficient, and Film Cooling Effectiveness Simultaneously in a Transonic Turbine Cascade

Journal of Thermal Science and Engineering Applications, 7(1).

A REVIEW OF HOLE GEOMETRY AND COOLANT DENSITY EFFECT ON FILM COOLING

Frontiers in Heat and Mass Transfer, 6(1).

A diagnostic technique for particle characterization using laser light extinction

Proceedings of the ASME Turbo Expo, 6.

Combustor heat shield impingement cooling and its effect on liner convective heat transfer for a model annular combustor with radial swirlers

Proceedings of the ASME Turbo Expo, 5C.