2014 journal article
Molybdenum nano-precipitates in silicon: A TEM and DLTS study
Physica Status Solidi. B, Basic Solid State Physics, 251(11), 2201–2204.
2014 journal article
Thermal conductivity of exfoliated p-type bismuth antimony telluride
Journal of Electronic Materials, 43(2), 320–328.
2013 journal article
Effect of oxygen and associated residual stresses on the mechanical properties of high growth rate Czochralski silicon
Journal of Applied Physics, 113(13).
2013 journal article
Fracture strength of photovoltaic silicon wafers evaluated using a controlled flaw method
Advanced Engineering Materials, 15(8), 756–760.
2013 journal article
Nanostructure fabrication on germanium and silicon by nanocoining imprint technique
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 37(4), 871–879.
2012 journal article
Deformation twins and related softening behavior in nanocrystalline Cu-30% Zn alloy
ACTA MATERIALIA, 60(8), 3340–3349.
2012 journal article
Nano-indentation: A tool to investigate crack propagation related phase transitions in PV silicon
Solar Energy Materials and Solar Cells, 96(1), 166–172.
2012 journal article
Oxygen precipitation related stress-modified crack propagation in high growth rate Czochralski silicon wafers
Journal of the Electrochemical Society, 159(2), H125–129.
2012 journal article
Studies on thermal stability, mechanical and electrical properties of nano crystalline Cu99.5Zr0.5 alloy
JOURNAL OF ALLOYS AND COMPOUNDS, 558, 44–49.
2012 journal article
Understanding the effect of impurities and grain boundaries on mechanical behavior of Si via nanoindentation of (110)/(100) direct Si bonded wafers
Journal of Materials Research, 27(1), 349–355.
2011 journal article
Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 529, 230–236.
2011 journal article
Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys
ACTA MATERIALIA, 59(14), 5758–5764.
2011 journal article
High hardness in a nanocrystalline Mg97Y2Zn1 alloy
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528(25-26), 7494–7499.
Contributors: Y. Wang*, X. Liao *, S. Mathaudhu *, L. Kecskes *, Y. Zhu n , C. Koch n n,
2011 journal article
Mechanical behavior of bulk nanocrystalline copper alloys produced by high energy ball milling
JOURNAL OF MATERIALS SCIENCE, 46(19), 6316–6322.
2010 journal article
Deformation twinning in a nanocrystalline hcp Mg alloy
SCRIPTA MATERIALIA, 64(3), 213–216.
Contributors: L. Kecskes *, C. Koch n, S. Mathaudhu *, X. Wu *, n & Y. Zhu n
2010 journal article
Impacts of Fertilization on Water Quality of a Drained Pine Plantation: A Worst Case Scenario
JOURNAL OF ENVIRONMENTAL QUALITY, 39(1), 293–303.
2010 article
Nanostructured materials by mechanical alloying: new results on property enhancement
Koch, C. C., Scattergood, R. O., Youssef, K. M., Chan, E., & Zhu, Y. T. (2010, September). JOURNAL OF MATERIALS SCIENCE, Vol. 45, pp. 4725–4732.
Contributors: C. Koch n, R. Scattergood n, n, E. Chan n & Y. Zhu n
2010 journal article
Understanding creep in nanocrystalline materials
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 373–378.
2009 journal article
Proximity gettering of Cu at a (110)/(001) grain boundary interface formed by direct silicon bonding
Applied Physics Letters, 94(22).
2008 journal article
Influence of pulse plating parameters on the synthesis and preferred orientation of nanocrystalline zinc from zinc sulfate electrolytes
ELECTROCHIMICA ACTA, 54(2), 677–683.
2005 journal article
Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys
Advanced Engineering Materials, 7(9), 787–794.
2005 article
Consolidation of a Cu-2.5 vol.% Al2O3 powder using high energy mechanical milling
Zhang, D. L., Raynova, S., Koch, C. C., Scattergood, R. O., & Youssef, K. M. (2005, November 25). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 410, pp. 375–380.
2005 journal article
Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility
SCRIPTA MATERIALIA, 54(2), 251–256.
2005 journal article
Tensile properties of in situ consolidated nanocrystalline Cu
ACTA MATERIALIA, 53(5), 1521–1533.
2005 journal article
Ultrahigh strength and high ductility of bulk nanocrystalline copper
APPLIED PHYSICS LETTERS, 87(9).
2004 journal article
Influence of additives and pulse electrodeposition parameters on production of nanocrystalline zinc from zinc chloride electrolytes
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 151(2), C103–C111.
2004 journal article
Ultratough nanocrystalline copper with a narrow grain size distribution
APPLIED PHYSICS LETTERS, 85(6), 929–931.
2003 journal article
Improved corrosion behavior of nanocrystalline zinc produced by pulse-current electrodeposition
CORROSION SCIENCE, 46(1), 51–64.
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.