Works (132)

Updated: November 1st, 2024 04:39

2024 journal article

A Multi-Criteria Approach for Quantifying the Impact of Global Megatrends on the Pulp and Paper Industry: Insights into Digitalization, Social Behavior Change, and Sustainability

LOGISTICS-BASEL, 8(2).

By: K. Vivas n, R. Vera n, S. Dasmohapatra*, R. Marquez n, S. Van Schoubroeck*, N. Forfora n, A. Azuaje*, R. Phillips n ...

author keywords: pulp and paper industry; global megatrends; digitalization; social behavior; sustainability; Delphi study; topic modeling
UN Sustainable Development Goal Categories
2. Zero Hunger (Web of Science)
4. Quality Education (Web of Science)
13. Climate Action (Web of Science)
14. Life Below Water (Web of Science)
15. Life on Land (Web of Science)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: April 15, 2024

2024 article

An economic analysis of bamboo plantations and feedstock delivered cost in the Southern US for the manufacturing of fiber-based bioproducts

Vivas, K. A., Vera, R. E., Phillips, R. B., Forfora, N., Azuaje, I., Zering, K., … Gonzalez, R. (2024, June 10). BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, Vol. 6.

By: K. Vivas n, R. Vera n, R. Phillips n, N. Forfora n, I. Azuaje n, K. Zering n, H. Chang n, J. Delborne n ...

author keywords: bamboo; fiber-based bioproducts; plantation economics; feedstock delivered cost; sensitivity analysis; forecasting risk analysis
UN Sustainable Development Goal Categories
13. Climate Action (Web of Science)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: June 15, 2024

2024 journal article

Characterizing value-added pellets obtained from blends of miscanthus, corn stover, and switchgrass

RENEWABLE ENERGY, 227.

By: T. Hossain n, D. Jones n, E. Godfrey n, D. Saloni n, M. Sharara n & D. Hartley*

author keywords: Biofuel; Blended biomass; Pellet quality; Durability; Ultimate analysis; Proximate analysis
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (Web of Science; OpenAlex)
13. Climate Action (Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: April 22, 2024

2024 journal article

Co-pyrolysis of biomass and polyethylene terephthalate (PET) as an alternative for energy production from waste valorization

FUEL, 362.

author keywords: Circular economy; Waste plastics; Biomass; Plastic waste conversion
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: February 12, 2024

2024 article

Environmental Sustainability Analysis of Rotary-Screen Printing and Digital Textile Printing

Hoque, S. M. A., Chapman, L. P., Moore, M., Lavelle, J., Saloni, D., Woodbridge, J., & King, K. M. (2024, September 19). AATCC JOURNAL OF RESEARCH, Vol. 9.

author keywords: Comparison between digital textile printing versus rotary-screen printing; Digital textile printing; Environmental parameters; Sustainability assessment; Textile printing
Sources: Web Of Science, NC State University Libraries
Added: September 30, 2024

2024 journal article

Evaluating chemi-mechanical pulping processes of agricultural residues: High-yield pulps from wheat straw for fiber-based bioproducts

INDUSTRIAL CROPS AND PRODUCTS, 221.

By: F. Urdaneta*, R. Kumar*, R. Marquez*, R. Vera, J. Franco, I. Urdaneta*, D. Saloni*, R. Venditti* ...

author keywords: Non-wood; Fiber; Pulp; Waste; Agricultural residue; Tissue paper; Mechanical pulping; Alternative fiber
UN Sustainable Development Goal Categories
2. Zero Hunger (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: September 9, 2024

2024 journal article

Nth-plant scenario for blended pellets of Miscanthus, Switchgrass, and Corn Stover using multi-modal transportation: Biorefineries and depots in the contiguous US

BIOMASS & BIOENERGY, 183.

By: T. Hossain n, D. Jones n, E. Godfrey III, D. Saloni n, M. Sharara n & D. Hartley*

author keywords: Biofuel; Miscanthus; Switchgrass; Corn stover; Supply chain; Optimization
UN Sustainable Development Goal Categories
13. Climate Action (Web of Science)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: March 15, 2024

2024 journal article

Prospects for the utilization of bio-oil-derived chemicals generated via co-pyrolysis of biomass and polyethylene terephthalate (PET)

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 183.

By: G. Cupertino, A. Pereira, J. Ucella-Filho, F. Delatorre, A. Silva, K. Silva, E. Souza, L. Parreira ...

author keywords: Plastics' waste; Circular economy; Chemical composition
Sources: Web Of Science, NC State University Libraries
Added: October 14, 2024

2024 article

The potential of wood-based urban waste to generate bioenergy and increase the energetic sustainability

Andrade, C. R., Cupertino, G. F. M., Silva, alison M., Brito, J. O., Morais, W. W. C., Balboni, B. M., … Dias Jr, A. F. (2024, February 22). CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, Vol. 2.

author keywords: Circular economy; Waste recovery; Energy sustainability
UN Sustainable Development Goal Categories
Sources: ORCID, Web Of Science, NC State University Libraries
Added: February 22, 2024

2024 article

Understanding the potential of bamboo fibers in the USA: A comprehensive techno-economic comparison of bamboo fiber production through mechanical and chemical processes

Vivas, K. A., Pifano, A., Vera, R. E., Urdaneta, F., Urdaneta, I., Forfora, N., … Gonzalez, R. (2024, June 26). BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, Vol. 6.

By: K. Vivas n, A. Pifano n, R. Vera n, F. Urdaneta n, I. Urdaneta n, N. Forfora n, C. Abatti, R. Phillips n ...

author keywords: technoeconomic analysis; bamboo pulp; mechanical pulping; chemical pulping; minimum required selling price
Sources: ORCID, Web Of Science, NC State University Libraries
Added: July 1, 2024

2024 journal article

Volumetric and Energy Production Assessment of Wood in Managed Forest in the Brazilian Arid Biome

BIORESOURCES, 19(4).

By: J. Lima*, R. Santos*, R. Castro*, F. Pareyn, M. Mendes*, I. Gomes*, F. Delatorre*, A. Dias*, D. Saloni n

author keywords: Managed forest; Brazilian semi-arid; Forest growth; Energy biomass
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: September 30, 2024

2023 journal article

A scalable high-porosity wood for sound absorption and thermal insulation

Nature Sustainability, 1.

By: X. Zhao*, Y. Liu*, L. Zhao*, A. Yazdkhasti*, Y. Mao*, A. Siciliano*, J. Dai, S. Jing* ...

Source: ORCID
Added: February 2, 2023

2023 article

Assessment of Feedstock Quality of Poplars (<i>Populus</i> L.) Using Selected Pellet-Quality Parameters

Ghezehei, S. B., & Saloni, D. (2023, December 22). BIOENERGY RESEARCH, Vol. 12.

By: S. Ghezehei n & D. Saloni n

author keywords: Ash Content; ENplus Quality Standards; Gross Caloric Content; Sulfur Content
UN Sustainable Development Goal Categories
13. Climate Action (Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: January 16, 2024

2023 journal article

Energy Performance of Different Charcoal Production Systems

ENERGIES, 16(21).

By: F. Bernardes*, T. Romanelli*, A. Pereira*, G. Cupertino*, M. Fernandes*, J. Brito*, E. Souza*, D. Saloni n, A. Dias Jr, C. Ryu

author keywords: energy balance; material flow; environmental analysis; charcoal kilns; EROI
Sources: Web Of Science, NC State University Libraries, ORCID
Added: December 4, 2023

2023 journal article

Environmental Life Cycle Assessment of Premium and Ultra Hygiene Tissue Products in the United States

BIORESOURCES, 18(2), 4006–4031.

By: A. Brito n, A. Suarez n, A. Pifano n, L. Reisinger*, J. Wright n, D. Saloni n, S. Kelley n, R. Gonzalez n, R. Venditti n, H. Jameel n

author keywords: Bleached Eucalyptus Kraft; Northern Bleached Softwood Kraft; BEK; NBSK; CTAD; UCTAD; eTAD; LDC; Life Cycle Assessment; LCA
Sources: Web Of Science, NC State University Libraries
Added: June 19, 2023

2023 journal article

From a Sustainability Perspective, Why Should Bioplastics Be Used for Additive Manufacturing?

Polymer Science, 4(4), 000594.

By: K. Vivas, R. Gonzalez & D. Saloni n

Contributors: K. Vivas, R. Gonzalez & D. Saloni n

Source: ORCID
Added: February 10, 2023

2023 journal article

Irrigation in Jatropha curcas L. cultivation and its effect on biomass for bioenergy generation

Journal of Cleaner Production.

Source: ORCID
Added: February 1, 2024

2023 journal article

Is sugarcane-based polyethylene a good alternative to fight climate change?

Journal of Cleaner Production.

By: A. Suarez n, E. Ford n, R. Venditti n, S. Kelley n, D. Saloni n & R. Gonzalez n

UN Sustainable Development Goal Categories
13. Climate Action (Web of Science)
Source: ORCID
Added: February 14, 2023

2023 journal article

Photoluminous Response of Biocomposites Produced with Charcoal

Polymers.

Source: ORCID
Added: September 18, 2023

2023 journal article

Transforming non-wood feedstocks into dissolving pulp via organosolv pulping: An alternative strategy to boost the share of natural fibers in the textile industry.

JOURNAL OF CLEANER PRODUCTION, 429.

By: R. Vera n, K. Vivas n, F. Urdaneta n, J. Franco n, R. Sun n, N. Forfora n, R. Frazier n, S. Gongora n ...

author keywords: Alternative fibers; SEW; Dissolving pulp; Textiles; Sustainability
Sources: Web Of Science, NC State University Libraries, ORCID
Added: December 18, 2023

2022 journal article

A Novel Approach to Charcoal Fine Waste: Sustainable Use as Filling of Polymeric Matrices

POLYMERS, 14(24).

By: F. Delatorre*, G. Mayrinck Cupertino*, M. Oliveira*, F. Gomes*, L. Roberto Profeti*, D. Profeti*, M. Guimaraes Junior, M. Azevedo*, D. Saloni n, A. Dias Junior*

author keywords: carbon materials; waste reuse; forest-based biomaterials; XPS
Sources: ORCID, Web Of Science, NC State University Libraries
Added: December 20, 2022

2022 report

A novel approach to charcoal fine waste: sustainable use as filling of polymeric matrices

[Preprint].

By: M. Delatorre*, G. Cupertino*, M. Oliveira*, F. Silva Gomes*, L. Profeti*, D. Profeti*, M. Guimarães Júnior , M. Azevedo*, D. Saloni  n, A. Dias*

Sources: NC State University Libraries, NC State University Libraries
Added: November 23, 2022

2022 journal article

Rethinking the use of bio-based plastics to accelerate the decarbonization of our society

Resources, Conservation and Recycling, 186, 106593.

By: A. Suarez n, E. Ford n, R. Venditti n, S. Kelley n, D. Saloni n & R. Gonzalez n

Contributors: D. Saloni n

author keywords: Life cycle assessment; Smart use of materials; Bio-based plastics; Bio-PET; PLA
UN Sustainable Development Goal Categories
Sources: ORCID, Web Of Science, NC State University Libraries, Crossref
Added: August 9, 2022

2021 journal article

Tuning the Adhesive Properties of Soy Protein Wood Adhesives with Different Coadjutant Polymers, Nanocellulose and Lignin

Polymers, 13(12), 1972.

author keywords: wood adhesive; biobased adhesive; soy protein; soy flour; lignin; shear strength
TL;DR: Different soy protein-based wood adhesives are proposed, and their performance is compared to commercial urea formaldehyde (UF) adhesive, which varies depending on the coadjutant polymer, the wood species and the addition of lignin. (via Semantic Scholar)
Sources: Web Of Science, Crossref, NC State University Libraries, ORCID
Added: July 6, 2021

2020 chapter book

A Review of Sustainable Materials Used in Thermoplastic Extrusion and Powder Bed Melting Additive Manufacturing

By: N. Mervine n, K. Brӓtt n & D. Saloni n

TL;DR: This paper presents a comprehensive review of the most relevant publications that integrates past and current biopolymer development for AM, 3D printed components advantages and challenges using the developed biopolymers, and materials and product testing. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: May 11, 2022

2020 chapter book

Bioplastic Modified with Woodflour for Additive Manufacturing

By: K. McLaughlin n, A. Webb n, K. Brӓtt n & D. Saloni n

TL;DR: Results showed the potential of using woodflour as an additive to enhance bioplastics, maintaining sustainability aspects and changing the biopolymer to be suitable for AM. (via Semantic Scholar)
Sources: Crossref, NC State University Libraries
Added: May 11, 2022

2020 journal article

Characterization of Selected Pyrolysis Products of Diseased Orange Wood

BIORESOURCES, 15(3), 7118–7126.

By: C. Kravetz n, C. Leca n, J. Brito n, D. Saloni n & D. Tilotta n

author keywords: Pyrolysis; Orange wood; Bio-oil; Charcoal; Chromatography
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 24, 2020

2020 journal article

Thermal, Structural, and Mechanical Effects of Nanofibrillated Cellulose in Polylactic Acid Filaments for Additive Manufacturing

BIORESOURCES, 15(4), 7954–7964.

By: D. Gomez-Maldonado*, M. Peresin*, C. Verdi n, G. Velarde n & D. Saloni n

author keywords: Biocomposites; Cellulose nanqfibrils; Polvlactic acid; Thermal properties; Mechanical properties; Additive manufacturing; 3D printing
Sources: Web Of Science, NC State University Libraries
Added: December 11, 2020

2019 article

Investigation of Bioplastics for Additive Manufacturing

ADVANCES IN ADDITIVE MANUFACTURING, MODELING SYSTEMS AND 3D PROTOTYPING, Vol. 975, pp. 365–376.

By: D. Saloni n & N. Mervine n

author keywords: Additive manufacturing; Biopolymers; Sustainability
TL;DR: Results showed the technical feasibility of some bioplastics for AM, and some plastics that are more sustainable, such as polylactic acid (PLA), have started to gain traction as a competitor to these traditional plastics. (via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: May 24, 2021

2019 journal article

Novel 3D printing filament composite using diatomaceous earth and polylactic acid for materials properties and cost improvement

COMPOSITES PART B-ENGINEERING, 177.

By: S. Aggarwal n, S. Johnson n, D. Saloni n & M. Hakovirta n

UN Sustainable Development Goal Categories
Sources: Web Of Science, ORCID, NC State University Libraries
Added: November 18, 2019

2018 journal article

Design and Development of Biopolymers for Additive Manufacturing

Peer-Reviewed Proceedings of the 2018 Industrial and Systems Engineering, 330–335.

By: D. Saloni, N. Mervine & C. Verdi

Source: NC State University Libraries
Added: May 21, 2022

2017 journal article

Design and Development of Logistics Models for Residential and Commercial Biomass Pellets for Heat and Power Generation in the U.S.

BioResources, 12(1).

By: U. Lacoa, G. Velarde n, M. Kay, E. Blanco & D. Saloni n

Sources: Crossref, NC State University Libraries
Added: May 11, 2022

2017 journal article

Management system based on the measurement of temperature and humidity with prediction calculation of the durability of materials in the crawlspace of houses in the southern region of the USA

Tekhné, 20(2), 081–096.

By: D. Saloni, A. Díaz, E. Fajardo, B. Cante & G. Velarde

Source: NC State University Libraries
Added: May 27, 2022

2017 conference paper

Novel Adhesives from Soybean proteins and biopolymer blends

Poster presented at the Wood Composite Center Fall Meeting, Atlanta, GA.

By: D. Saloni, C. Salas & G. Velarde

Event: Wood Composite Center Fall Meeting at Atlanta, GA on October 23-24, 2017

Source: NC State University Libraries
Added: May 21, 2022

2017 journal article

Qualitative analysis of the extractives of orange wood

Wood and Fiber Science, 49(4), 407–412. https://wfs.swst.org/index.php/wfs/article/view/2599

By: C. Kravetz, J. Brito, D. Saloni & D. Tilotta

Sources: NC State University Libraries, ORCID
Added: August 6, 2018

2017 conference paper

Understanding the Machinability of MDF and HDF

Velarde, G., Saloni, D., & Kamke, F. (2017, October 23). Poster presented at the Wood Composite Center Fall Meeting, Atlanta, GA.

By: G. Velarde, D. Saloni & F. Kamke

Event: Wood Composite Center Fall Meeting at Atlanta, GA on October 23-24, 2017

Source: NC State University Libraries
Added: May 27, 2022

2015 conference paper

Design and development of a U.S. logistics model for residential and commercial biomass

Presented at the Sun Grant Regional Conference, Auburn, AL.

By: G. Velarde, U. Lacoa & D. Saloni

Event: Sun Grant Regional Conference at Auburn, AL

Source: NC State University Libraries
Added: May 27, 2022

2014 conference paper

Fiber pretreatment in the production of cellulose nanofibrils

Presented at the 247th National Spring Meeting of the American-Chemical-Society (ACS), Dallas, TX.

By: C. Carrillo, D. Saloni & O. Rojas

Event: 247th National Spring Meeting of the American-Chemical-Society (ACS) at Dallas, TX

Source: NC State University Libraries
Added: May 27, 2022

2014 journal article

Improving Housing Conditions from the Crawl Space up with a Monitoring and Control System

Housing and Society, 41(1), 53–69.

By: G. Velarde, D. Saloni*, R. Lemaster & S. Jackson

Sources: Crossref, NC State University Libraries
Added: February 24, 2020

2014 journal article

US biomass opportunities for value-added biomass exports based on the European Union renewable energy share targets

BioResources, 9(4), 7606–7621.

By: U. Lacoa n, G. Velarde n & D. Saloni n

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: NC State University Libraries, NC State University Libraries
Added: August 6, 2018

2013 conference paper

Analyses of Moisture and Volume Reduction as Means to Optimize Biomass Sourcing under the Scenarios of Disperse and Centralized Operations

Velarde, G., & Saloni, D. (2013, April). Poster presented at the International Biomass Conference and Expo, BBI International, Minneapolis, MN.

By: G. Velarde & D. Saloni

Event: International Biomass Conference and Expo, BBI International at Minneapolis, MN

Source: NC State University Libraries
Added: May 27, 2022

2013 conference paper

Biomass pretreatment and logistics

Velarde, G., & Saloni, D. (2013, May 6). Presented at the Wood Education and Resource Center, Princeton, WV.

By: G. Velarde & D. Saloni

Event: Wood Education and Resource Center at Princeton, WV on May 6-7, 2013

Source: NC State University Libraries
Added: May 27, 2022

2013 journal article

Capacity, production, and consumption assessment of the U.S. south Atlantic wood pellet industry

BioResources, 8(4), 5908–5924.

By: G. Velarde n, A. Pirraglia n & D. Saloni n

Sources: NC State University Libraries, NC State University Libraries
Added: August 6, 2018

2013 conference paper

Effect of composition and formulation variables in biomass flooding capacity by o/w microemulsions

Presented at the 245th National Spring Meeting of the American-Chemical-Society (ACS), New Orleans, LA.

By: C. Carrillo, D. Saloni & O. Rojas

Event: 245th National Spring Meeting of the American-Chemical-Society (ACS) at New Orleans, LA

Source: NC State University Libraries
Added: May 27, 2022

2013 journal article

Evaluation of O/W microemulsions to penetrate the capillary structure of woody biomass: interplay between composition and formulation in green processing

Green Chemistry, 15(12), 3377.

By: C. Carrillo n, D. Saloni n & O. Rojas n

UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Sources: Web Of Science, Crossref, NC State University Libraries
Added: August 6, 2018

2013 conference paper

Improvement of Housing Conditions by Assessing and Remediating Moisture Problems in Wood Housing Structures

Velarde, G., Saloni, D., & Lemaster, R. (2013, March). Poster presented at the 8th Annual NC State University Graduate Student Research Symposium, Raleigh, NC.

By: G. Velarde, D. Saloni & R. Lemaster

Event: 8th Annual NC State University Graduate Student Research Symposium at Raleigh, NC

Source: NC State University Libraries
Added: May 27, 2022

2013 conference paper

Pellet logistics challenges and opportunities

Velarde, G., & Saloni, D. (2013, July). Presented at the Pellet Fuel Institute Annual Conference, Asheville, NC.

By: G. Velarde & D. Saloni

Event: Pellet Fuel Institute Annual Conference at Asheville, NC

Source: NC State University Libraries
Added: May 27, 2022

2013 conference paper

Solid fuels current and future trends

Saloni, D. (2013, May 6). Presented at the Biomass and Bioenergy Seminar, Wood Education and Resource Center, Princeton, WV.

By: D. Saloni

Event: Biomass and Bioenergy Seminar, Wood Education and Resource Center at Princeton, WV on May 6-7, 2013

Source: NC State University Libraries
Added: May 27, 2022

2013 conference paper

Techno-financial analysis of pellet production in the US

Saloni, D. (2013, July). Presented at the Pellet Fuel Institute Annual Conference, Asheville, NC.

By: D. Saloni

Event: Pellet Fuel Institute Annual Conference at Asheville, NC

Source: NC State University Libraries
Added: May 27, 2022

2013 conference paper

US opportunities for exporting biomass to Europe

Lacoa, U., & Saloni, D. (2013, May 6). Presented at the Biomass and Bioenergy Seminar, Wood Education and Resource Center, Princeton, WV.

By: U. Lacoa & D. Saloni

Event: Biomass and Bioenergy Seminar at Wood Education and Resource Center, Princeton, WV on May 6-7, 2013

Source: NC State University Libraries
Added: May 27, 2022

2013 conference paper

Wood Pellets Market Trends in the U.S

Velarde, G., & Saloni, D. (2013, April). Presented at the South Atlantic Region, International Biomass Conference and Expo, Track 1: Pellets & Densified Biomass, BBI International, Minneapolis, MN.

By: G. Velarde & D. Saloni

Event: South Atlantic Region, International Biomass Conference and Expo, Track 1: Pellets & Densified Biomass, BBI International at Minneapolis, MN

Source: NC State University Libraries
Added: May 27, 2022

2012 conference paper

Assessment of the most adequate pre-treatments and woody biomasses intended for co-firing in the U.S

Poster presented at the Sungrant National Conference, New Orleans, LA.

By: D. Saloni, A. Pirraglia, R. Gonzalez, J. Denig & J. Wright

Event: Sungrant National Conference at New Orleans, LA on October 2-5, 2012

Source: NC State University Libraries
Added: May 27, 2022

2012 journal article

Assessment of the most adequate pre-treatments and woody biomasses intended for direct co-firing in the U.S

BioResources, 7(4), 4817–4842.

By: A. Pirraglia n, R. Gonzalez*, J. Denig, D. Saloni* & J. Wright

Contributors: A. Pirraglia n, R. Gonzalez*, J. Denig, D. Saloni* & J. Wright

Sources: NC State University Libraries, ORCID
Added: April 13, 2020

2012 journal article

Capillary flooding of wood with microemulsions from Winsor I systems

JOURNAL OF COLLOID AND INTERFACE SCIENCE, 381, 171–179.

By: C. Carrillo n, D. Saloni n, L. Lucia n, M. Hubbe n & O. Rojas n

author keywords: Microemulsions; Flooding; Surfactants; Capillary structure; Biomass; Wood impregnation; Extraction
MeSH headings : Cyclohexenes / chemistry; Emulsions; Hydrophobic and Hydrophilic Interactions; Kinetics; Limonene; Oils / chemistry; Porosity; Surface-Active Agents / chemistry; Terpenes / chemistry; Thermodynamics; Viscosity; Water / chemistry; Wettability; Wood / chemistry
TL;DR: The concept proposed in this research is expected to open opportunities in fluid sorption in fiber systems for biomass pretreatment, and delivery of hydrophilic or lipophilic moieties in porous, lignocellulosics. (via Semantic Scholar)
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2012 conference paper

Fuel Properties and Suitability of E. benthamii and E. macarthurii for Torrefied Wood and Pellets

Pirraglia, A., Gonzalez, R., & Saloni, D. (2012, April). Presented at the International Biomass Conference and Expo, Denver, CO.

By: A. Pirraglia, R. Gonzalez & D. Saloni

Event: International Biomass Conference and Expo at Denver, CO

Source: NC State University Libraries
Added: May 27, 2022

2012 journal article

Fuel properties and suitability of eucalyptus benthamii and eucalyptus macarthurii for torrefied wood and pellets

BioResources, 7(1), 217–235.

By: A. Pirraglia, R. Gonzalez, D. Saloni, J. Wright & J. Denig

Source: NC State University Libraries
Added: August 6, 2018

2012 conference paper

Involvement, Empowerment and Team Building

Presented at the Wood Industry Week Seminar, Wood Education and Resource Center, Princeton, WA.

By: D. Saloni

Event: Wood Industry Week Seminar, Wood Education and Resource Center at Princeton, WA

Source: NC State University Libraries
Added: May 27, 2022

2012 conference paper

Lean Manufacturing Implementation Analysis in the Secondary Wood Industry

Presented at the Wood Industry Week Seminar, Wood Education and Resource Center, Princeton, WA.

By: D. Saloni

Event: Wood Industry Week Seminar, Wood Education and Resource Center at Princeton, WA

Source: NC State University Libraries
Added: May 27, 2022

2012 conference paper

Supply chain analysis and evaluation of manufacturing solid biofuels for the U.S. market

Saloni, D., Pirraglia, A., Denig, J., & Gonzalez, R. (2012, November). Presented at the SHPE National Conference, Fort Worth, TX.

By: D. Saloni, A. Pirraglia, J. Denig & R. Gonzalez

Event: SHPE National Conference at Fort Worth, TX

Source: NC State University Libraries
Added: May 27, 2022

2012 conference paper

Technical and Economic Modeling for the Production of Torrefied Ligno-Cellulosic Biomass for the U.S

Pirraglia, A., Gonzalez, R., & Saloni, D. (2012, April). Presented at the International Biomass Conference and Expo, Denver, CO.

By: A. Pirraglia, R. Gonzalez & D. Saloni

Event: International Biomass Conference and Expo at Denver, CO.

Source: NC State University Libraries
Added: May 27, 2022

2012 journal article

Technical and Economic Modeling for the Production of Torrefied Lignocellulosic Biomass for the U.S. Densified Fuel Industry

BIOENERGY RESEARCH, 6(1), 263–275.

By: A. Pirraglia n, R. Gonzalez n, J. Denig n & D. Saloni n

Contributors: A. Pirraglia n, R. Gonzalez n, J. Denig n & D. Saloni n

author keywords: Torrefaction; Techno-economics; Biomass pre-treatment; Densified biofuel; Lignocellulosic biomass
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2012 journal article

Technical and economic assessment for the production of torrefied ligno-cellulosic biomass pellets in the US

ENERGY CONVERSION AND MANAGEMENT, 66, 153–164.

By: A. Pirraglia n, R. Gonzalez n, D. Saloni n & J. Denig n

Contributors: A. Pirraglia n, R. Gonzalez n, D. Saloni n & J. Denig n

author keywords: Torrefaction; Bioenergy; Wood pellets; Densification; Biomass
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2011 journal article

Biomass to energy in the southern united states: supply chain and delivered cost

BioResources, 6(3), 2954–2976.

By: R. Gonzalez, R. Phillips, D. Saloni, H. Jameel, R. Abt, A. Pirraglia, J. Wright

Source: NC State University Libraries
Added: August 6, 2018

2011 conference paper

Cold-Resistant Eucalyptus: characteristics and suitability for solid fuels production

Presented at the Forest Productivity Cooperative Annual Meeting, Raleigh, NC.

By: D. Saloni, A. Pirraglia, R. Gonzalez, J. Wright & J. Johnson

Event: Forest Productivity Cooperative Annual Meeting at Raleigh, NC

Source: NC State University Libraries
Added: May 27, 2022

2011 journal article

Control system evaluation and implementation for the abrasive machining process on wood

BioResources, 6(3), 2763–2775.

By: D. Saloni, R. Lemaster & S. Jackson

Source: NC State University Libraries
Added: August 6, 2018

2011 conference paper

Converting Eucalyptus Biomass into Ethanol

Presented at the IUFRO Working Group 2.08.03: Improvement and Culture of Eucalyptus, Porto Seguro, Brazil.

By: D. Saloni, A. Pirraglia & R. Gonzalez

Event: IUFRO Working Group 2.08.03: Improvement and Culture of Eucalyptus at Porto Seguro, Brazil

Source: NC State University Libraries
Added: May 27, 2022

2011 conference paper

Design, Verification and Validation of a Model that Measures Environmental Image in Companies Implementing Green Building, by Means of Fuzzy Logic for Decision-making Purposes

Poster presented at the 6th International Conference on Industrial Ecology, Berkeley California.

By: A. Pirraglia, G. Velarde & D. Saloni

Event: 6th International Conference on Industrial Ecology at Berkeley California on June 7-10, 2011

Source: NC State University Libraries
Added: May 27, 2022

2011 journal article

Economics of cellulosic ethanol production: Green liquor pretreatment for softwood and hardwood, greenfield and repurpose scenarios

BioResources, 6(3), 2551–2567.

By: R. Gonzalez, T. Treasure, R. Phillips, H. Jameel & D. Saloni

Source: NC State University Libraries
Added: August 6, 2018

2011 journal article

Evaluation of the Energy Balance for the Production of Briquettes from Biomass

FOREST PRODUCTS JOURNAL, 61(4), 302–309.

By: R. Arrieche, D. Saloni*, H. Dyk & R. Lemaster*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (Web of Science; OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2011 conference paper

Global Wood Chip Demand

Presented at the Southern Resources Assessment Consortium Annual Meeting, Durham, NC.

By: D. Saloni & A. Pirraglia

Event: Southern Resources Assessment Consortium Annual Meeting at Durham, NC

Source: NC State University Libraries
Added: May 27, 2022

2011 journal article

Lean manufacturing in the U.S. South Atlantic region: An overview of the current state of implementation in the secondary wood industry

International Wood Products Journal, 2(1), 30–37.

By: G. Velarde n, A. Pirraglia n, H. van Dyk n & D. Saloni n

author keywords: Lean manufacturing; Secondary wood industry; US South Atlantic Region
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure (OpenAlex)
15. Life on Land (Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: June 9, 2022

2011 conference paper

Logistics and Transportation Analysis and Quantification of Forest Biomass from the U.S. to Europe. A Supply and Demand Interaction

Presented at the 6th International Conference on Industrial Ecology, Berkeley California.

By: G. Velarde, A. Pirraglia & D. Saloni

Event: 6th International Conference on Industrial Ecology at Berkeley California on June 7-10, 2011

Source: NC State University Libraries
Added: May 27, 2022

2011 journal article

Measuring environmental improvements image in companies implementing green manufacturing, by means of a fuzzy logic model for decision-making purposes

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 61(5-8), 703–711.

By: A. Pirraglia n & D. Saloni n

author keywords: Green manufacturing; Environmental improvement index; Environmental image; Fuzzy logic
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2011 journal article

Thermo-mechanical pulping as a pretreatment for agricultural biomass for biochemical conversion

BioResources, 6(2), 1599–1614.

By: R. Gonzalez, H. Jameel, H. Chang, T. Treasure, A. Pirraglia & D. Saloni

Source: NC State University Libraries
Added: August 6, 2018

2011 journal article

Tool Wear When Cutting Wood Fiber-Plastic Composite Materials

FOREST PRODUCTS JOURNAL, 61(2), 149–154.

By: D. Saloni*, U. Buehlmann* & R. Lemaster*

Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2010 conference paper

A techno-economic analysis of wood pellets production

Poster presented at the Graduate Student Poster Competition, Society of Hispanic Professional Engineers Conference 2010, Cincinnati, OH.

By: A. Pirraglia, R. Gonzalez & D. Saloni

Event: Graduate Student Poster Competition, Society of Hispanic Professional Engineers Conference 2010 at Cincinnati, OH

Source: NC State University Libraries
Added: May 27, 2022

2010 journal article

Converting Eucalyptus biomass into ethanol: Financial and sensitivity analysis in a co-current dilute acid process. Part II

Biomass and Bioenergy, 35(2), 767–772.

By: R. Gonzalez n, T. Treasure n, R. Phillips n, H. Jameel n, D. Saloni n, R. Abt, J. Wright n

Contributors: R. Gonzalez n, T. Treasure n, R. Phillips n, H. Jameel n, D. Saloni n, R. Abt, J. Wright n

author keywords: Eucalyptus; Biomass; Bioenergy; Carbohydrate; Ethanol; Cellulosic ethanol
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, ORCID, Crossref
Added: August 6, 2018

2010 conference paper

Design, Development and validation of a model to evaluate the environmental image for manufacturing companies implementing Green Building

Presented at the SWST International Convention. Palais des Nations, Geneva, Switzerland.

By: A. Pirraglia & D. Saloni

Event: SWST International Convention. Palais des Nations at Geneva, Switzerland

Source: NC State University Libraries
Added: May 27, 2022

2010 conference paper

Design, verification and validation of a model that measures environmental image in companies implementing Green Manufacturing, by means of fuzzy logic for decision-making purposes

Presented at the SHPE Conference, Cincinnati, OH.

By: A. Pirraglia & D. Saloni

Event: SHPE Conference at Cincinnati, OH

Source: NC State University Libraries
Added: May 27, 2022

2010 conference paper

Environmental Image Model for Companies Implementing Green Manufacturing, by Means of Fuzzy Logic for Decision-Making

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Mexico.

By: A. Pirraglia & D. Saloni

Event: Industrial Engineering Research Conference. Institute of Industrial Engineers at Mexico

Source: NC State University Libraries
Added: May 27, 2022

2010 journal article

Exploring the potential of Eucalyptus for energy production in the Southern United States: Financial analysis of delivered biomass. Part I

BIOMASS & BIOENERGY, 35(2), 755–766.

By: R. Gonzalez n, T. Treasure n, J. Wright n, D. Saloni n, R. Phillips n, R. Abt, H. Jameel n

Contributors: R. Gonzalez n, T. Treasure n, J. Wright n, D. Saloni n, R. Phillips n, R. Abt, H. Jameel n

author keywords: Eucalyptus; Plantation; Biomass; Bioenergy; Carbohydrate; Delivered cost
UN Sustainable Development Goal Categories
13. Climate Action (Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2010 conference paper

Housing Elements Research Chamber: A new testing facility - a crawl space study

Poster presented at the Graduate Student Poster Competition, Society of Hispanic Professional Engineers Conference 2010, Cincinnati, OH.

By: G. Velarde, D. Saloni & R. Lemaster

Event: Graduate Student Poster Competition, Society of Hispanic Professional Engineers Conference 2010 at Cincinnati, OH

Source: NC State University Libraries
Added: May 27, 2022

2010 journal article

Implementation analysis of lean manufacturing in the secondary wood industry in North Carolina

Journal of Forest Products and Business Research, 7(2).

By: A. Pirraglia, D. Saloni, R. Lemaster & H. van Dyk

Source: NC State University Libraries
Added: May 27, 2022

2010 conference paper

Loblolly Pine for Biomass-Bioenergy: A Study of Delivery Cost and Simulation of Optimum Rotation Length and Stand Tree Density in Southern United States

Presented at the Biomass Conference, Minneapolis, Minnesota, USA.

By: R. Gonzalez, D. Saloni, R. Phillips & J. Wright

Event: Biomass Conference at Minneapolis, Minnesota, USA

Source: NC State University Libraries
Added: May 27, 2022

2010 journal article

Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process

SENSORS, 10(11), 10401–10412.

By: D. Saloni n, R. Lemaster n & S. Jackson n

author keywords: abrasive machining; process monitoring; abrasive belt life; belt loading; acoustic emission; optical sensors
TL;DR: The background research showed that abrasive belts can effectively be cleaned by the appropriate cleaning technique and the process monitoring system developed increases the life of the belt by detecting and removing the abrasive loading during the machining process. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2010 conference paper

Sustainable Biofuels production: A supply chain and economic analysis

Presented at the AIChE Annual Meeting, Salt Lake City, UT.

By: R. Gonzalez, D. Saloni, R. Phillips, H. Jameel & S. Kelley

Event: AIChE Annual Meeting at Salt Lake City, UT

Source: NC State University Libraries
Added: May 27, 2022

2010 journal article

Techno-economical analysis of wood pellets production for us manufacturers

BioResources, 5(4), 2374–2390.

By: A. Pirraglia, R. Gonzalez & D. Saloni

Source: NC State University Libraries
Added: August 6, 2018

2010 magazine article

The Business of Growing Eucalyptus for Biomass

Biomass Magazine.

By: R. Gonzalez, J. Wright, D. Saloni, R. Phillips, H. Jameel & S. Kelley

Source: NC State University Libraries
Added: May 27, 2022

2010 magazine article

Wood pellets: An Expanding Market Opportunity

Pirraglia, A., Gonzalez, R., Saloni, D., & Wright, J. (2010, July). Biomass Magazine.

By: A. Pirraglia, R. Gonzalez, D. Saloni & J. Wright

Source: NC State University Libraries
Added: May 27, 2022

2009 magazine article

Filling a Need: Forest Plantations for Bioenergy in the Southern US

Biomass Magazine, 8, 44–47.

By: R. Gonzalez, J. Wright & D. Saloni

Source: NC State University Libraries
Added: May 27, 2022

2009 conference paper

Financial Analysis of Biomass Delivery Cost and Conversion into Ethanol in Southern United States

Poster presented at the Bioenergy 2009: Sustainable Bioenergy Business, Jyvaskyla, Finland.

By: R. Gonzalez, R. Phillips, D. Saloni, H. Jameel & S. Kelley

Event: Bioenergy 2009: Sustainable Bioenergy Business at Jyvaskyla, Finland

Source: NC State University Libraries
Added: May 27, 2022

2009 journal article

Performance of woodfiber-plastic composites subjected to abrasive machining

Forest Products Journal, 59(6), 61–64.

By: U. Buehlmann, D. Saloni & R. Lemaster

Source: NC State University Libraries
Added: August 6, 2018

2009 conference paper

Potential production and delivery cost of Eucalyptus for pulp and bio-refinery in Southern U.S

Presented at the International Biomass Conference, Portland, OR.

By: R. Gonzalez, D. Saloni, R. Phillips & J. Wright

Event: International Biomass Conference at Portland, OR

Source: NC State University Libraries
Added: May 27, 2022

2009 conference paper

Process flow analysis and improvement on a modular home manufacturer using lean manufacturing tools and simulation techniques

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Miami, FL.

By: G. Velarde, D. Saloni & M. Giunta

Event: Industrial Engineering Research Conference. Institute of Industrial Engineers at Miami, FL

Source: NC State University Libraries
Added: May 27, 2022

2009 journal article

Process flow improvement proposal using lean manufacturing philosophy and simulation techniques on modular home manufacturer

Lean Construction Journal, 1(1), 77–93.

By: G. Velarde, D. Saloni, H. van Dyk & M. Giunta

Source: NC State University Libraries
Added: May 27, 2022

2009 conference paper

Process improvement on a modular home manufacturer by simulation techniques and lean manufacturing tools

Poster presented at the Society of Hispanic Professional Engineers Conference, Washington, DC.

By: G. Velarde, D. Saloni, H. van Dyk & M. Giunta

Event: Society of Hispanic Professional Engineers Conference at Washington, DC

Source: NC State University Libraries
Added: May 27, 2022

2009 conference paper

Role of Bioenergy Plantations in Creating a Transportation Biofuel Industry

Southern Forest Economics Workers 2009 Annual Meeting Proceedings. Presented at the Southern Forest Economics Workers 2009 Annual Meeting, Chapel Hill, North Carolina, USA.

By: D. Saloni

Event: Southern Forest Economics Workers 2009 Annual Meeting at Chapel Hill, North Carolina, USA

Source: NC State University Libraries
Added: May 27, 2022

2009 conference paper

Role of bioenergy plantations in creating a transportation biofuel

Presented at the Southern Forest Economics Workers (SOFEW).

By: R. Gonzalez, D. Saloni, R. Phillips & J. Wright

Event: Southern Forest Economics Workers (SOFEW)

Source: NC State University Libraries
Added: May 27, 2022

2009 journal article

Status of lean manufacturing implementation on secondary wood industries including residential, cabinet, millwork, and panel markets

BioResources, 4(4), 1341–1358.

By: A. Pirraglia, D. Saloni & H. Dyk

Source: NC State University Libraries
Added: August 6, 2018

2009 conference paper

Thermo-Mechanical Pulping and Post-treatment of Agriculture Biomass for Ethanol Production: Developing More Efficient-Low Capital Intensive Process

Poster presented at the SHPE National Conference, Washington, DC.

By: R. Gonzalez, H. Jameel, H. Chang, R. Phillips & D. Saloni

Event: SHPE National Conference at Washington, DC

Source: NC State University Libraries
Added: May 27, 2022

2009 magazine article

Woody Biomass. Filling a need: Forest Plantations for Bioenergy in Southern U.S

Gonzalez, R., Wright, J., & Saloni, D. (2009, August). Biomass Magazine.

By: R. Gonzalez, J. Wright & D. Saloni

Source: NC State University Libraries
Added: May 27, 2022

2009 magazine article

Worldwide Pulp and Paper Industry: facing the crisis

TAPPI Paper 360 Magazine.

By: G. Velarde, R. Gonzalez, D. Saloni & R. Handfield

Source: NC State University Libraries
Added: May 27, 2022

2008 conference paper

Designing and implementing a quantitative methodology able to forecast the behavior of experimental data for abrasive machining

Presented at the SHPE Conference.

By: A. Pirraglia, D. Saloni, R. Lemaster & H. Gasparin

Event: SHPE Conference

Source: NC State University Libraries
Added: May 27, 2022

2008 conference paper

Designing and testing of a quantitative methodology capable of forecast the behavior of experimental data sanding and cleaning of the sanding belts for abrasive machining

Presented at the Forest Product Society, 62nd International Convention, St. Louis, Missouri.

By: A. Pirraglia, D. Saloni, R. Lemaster & H. Gasparin

Event: Forest Product Society, 62nd International Convention at St. Louis, Missouri

Source: NC State University Libraries
Added: May 27, 2022

2008 conference paper

Implementation of lean manufacturing in the secondary wood industry

Presented at the Operational Excellence Conference, Institute of Industrial Engineers, Minneapolis, MN.

By: D. Saloni & A. Pirraglia

Event: Operational Excellence Conference, Institute of Industrial Engineers at Minneapolis, MN

Source: NC State University Libraries
Added: May 27, 2022

2008 journal article

South America: Industrial roundwood supply potential

BioResources, 3(1), 255–269.

By: R. Gonzalez, D. Saloni, S. Dasmohapatra & F. Cubbage

Source: NC State University Libraries
Added: August 6, 2018

2008 conference paper

South America: Industrial roundwood supply potential

Presented at the Forest Product Society, 62nd International Convention, St. Louis, Missouri.

By: R. Gonzalez, S. Dasmohapatra, D. Saloni & F. Cubbage

Event: Forest Product Society, 62nd International Convention at St. Louis, Missouri

Source: NC State University Libraries
Added: May 27, 2022

2008 magazine article

The market of pulp and paper in Venezuela

TAPPI Paper 360 Magazine.

By: R. Gonzalez, S. Dasmohapatra, O. Carrero & D. Saloni

Source: NC State University Libraries
Added: May 27, 2022

2008 conference paper

Timberland ownership shifts and forest management intensity in Southern U.S

Presented at the Southern Forest Resource Assessment Consortium (SOFAC).

By: R. Gonzalez, S. Dasmohapatra, D. Saloni & F. Cubbage

Event: Southern Forest Resource Assessment Consortium (SOFAC)

Source: NC State University Libraries
Added: May 27, 2022

2007 conference paper

Design and development of a process monitoring and control system for abrasive machining processes

Presented at the International Wood machining Seminar, Vancouver, CA.

By: D. Saloni & R. Lemaster

Event: International Wood machining Seminar at Vancouver, CA

Source: NC State University Libraries
Added: May 27, 2022

2007 conference paper

Process monitoring of the abrasive machining process when wood is used

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Nashville, TN.

By: D. Saloni, R. Lemaster & A. Cardenas

Event: Industrial Engineering Research Conference. Institute of Industrial Engineers at Nashville, TN

Source: NC State University Libraries
Added: May 27, 2022

2007 conference paper

Simulation model design as a tool for improving abrasive machining process

Presented at the Institute of Industrial Engineers Solutions Conference. Institute of Industrial Engineers, Nashville, TN.

By: N. Barreto, D. Saloni, A. Cardenas, H. Gasparin & R. Lemaster

Event: Institute of Industrial Engineers Solutions Conference. Institute of Industrial Engineers at Nashville, TN

Source: NC State University Libraries
Added: May 27, 2022

2006 conference paper

Abrasive cleaning analysis when thermal-shock techniques are used

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Orlando, FL.

By: D. Saloni, A. Cardenas & R. Lemaster

Event: Industrial Engineering Research Conference. Institute of Industrial Engineers at Orlando, FL

Source: NC State University Libraries
Added: May 27, 2022

2006 conference paper

Abrasive loading prevention by controlling temperature using thermal-shock techniques

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Orlando, FL.

By: D. Saloni, A. Cardenas, D. Li & R. Lemaster

Event: Industrial Engineering Research Conference. Institute of Industrial Engineers at Orlando, FL

Source: NC State University Libraries
Added: May 27, 2022

2006 conference paper

Analisis de la implementacion de la manufactura esbelta en la industria maderera

Presented at the Solutions Conference / Latin American Track. Institute of Industrial Engineers, Orlando, FL.

By: D. Saloni, A. Cardenas & R. Lemaster

Event: Solutions Conference / Latin American Track. Institute of Industrial Engineers at Orlando, FL

Source: NC State University Libraries
Added: May 27, 2022

2005 journal article

Abrasive machining process characterization on material removal rate, final surface texture, and power consumption for wood

Forest Products Journal, 55(12), 35–41.

By: D. Saloni, R. Lemaster & S. Jackson

Source: NC State University Libraries
Added: August 6, 2018

2005 conference paper

Influence of woodfiber-plastic material composition on machining and abrasion performance

Presented at the Sixth International Conference on wood-fiber plastic composites, Madison, WI.

By: U. Buehlmann, O. Ndiapi, D. Saloni, R. Lemaster & M. Wolcott

Event: Sixth International Conference on wood-fiber plastic composites at Madison, WI

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Lean Manufacturing potential in the American Wood Industry

Presented at the 5th Annual Lean Management Solutions. Institute of Industrial Engineers, Orlando, FL.

By: D. Saloni, R. Lemaster, A. Cardenas., U. Buehlmann & W. Meier

Event: 5th Annual Lean Management Solutions. Institute of Industrial Engineers at Orlando, FL

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Lean manufacturing system and implementation analysis in the North Carolina wood industry

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

By: D. Saloni, U. Buehlmann, A. Cardenas, R. Lemaster & W. Meier

Event: Forest Products Society. FPS 59th International Convention at Quebec City, Quebec, CA

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Machining and abrasion performance of woodfiber plastic composites

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

By: U. Buehlmann, O. Ndiapi, D. Saloni, R. Lemaster & M. Wolcott

Event: Forest Products Society. FPS 59th International Convention at Quebec City, Quebec, CA

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Preliminary research on Caribbean pine subjected to secondary machining process

Poster presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

By: D. Saloni, T. Horn & R. Lemaster

Event: Forest Products Society. FPS 59th International Convention at Quebec City, Quebec, CA

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Preliminary research on cleaning characterization on abrasive machining process when wood is used

Presented at the Industrial Engineering Research Conference, Atlanta, GA.

By: D. Saloni, R. Lemaster, T. Horn & A. Cardenas

Event: Industrial Engineering Research Conference at Atlanta, GA

Source: NC State University Libraries
Added: May 27, 2022

2005 conference paper

Process monitoring applications on abrasive belt loading

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, CA.

By: D. Saloni & R. Lemaster

Event: Forest Products Society. FPS 59th International Convention at Quebec City, CA

Source: NC State University Libraries
Added: May 27, 2022

2004 conference paper

Abrasive machining process characterization on power consumption when wood is used

Presented at the Industrial Engineering Research Conference, Houston, TX.

By: D. Saloni, R. Lemaster & S. Jackson

Event: Industrial Engineering Research Conference at Houston, TX

Source: NC State University Libraries
Added: May 27, 2022

2004 journal article

Fuzzy knowledge-based modeling and statistical regression in abrasive wood machining

Forest Products Journal, 54(5), 66–72.

By: A. Carrano, J. Taylor, R. Young, R. Lemaster & D. Saloni

Source: NC State University Libraries
Added: August 6, 2018

2004 conference paper

Update of abrasive machining research for processing wood products

Presented at the 1st Annual Manufacturing Technology Summit Conference, Society of Manufacturing Engineers, Dearborn, MI.

By: D. Saloni & R. Lemaster

Event: 1st Annual Manufacturing Technology Summit Conference, Society of Manufacturing Engineers at Dearborn, MI

Source: NC State University Libraries
Added: May 27, 2022

2003 conference paper

Comparison between different geometric shapes of engineered abrasives on material removal and surface quality

Presented at the Industrial Engineering Research Conference, Portland, OR.

By: D. Saloni, A. Carrano & R. Lemaster

Event: Industrial Engineering Research Conference at Portland, OR

Source: NC State University Libraries
Added: May 27, 2022

2003 conference paper

Woodfiber-Plastic Composites Machining Characteristics

Presented at the 14th The International Conference on Composite Materials, Society of Manufacturing Engineers, San Diego, CA.

By: D. Saloni, U. Buehlmann & R. Lemaster

Event: 14th The International Conference on Composite Materials, Society of Manufacturing Engineers at San Diego, CA

Source: NC State University Libraries
Added: May 27, 2022

2002 conference paper

Traditional versus engineered abrasives on material removal and surface quality

Presented at the Industrial Engineering Research Conference, Orlando, FL.

By: D. Saloni, A. Carrano & R. Lemaster

Event: Industrial Engineering Research Conference at Orlando, FL

Source: NC State University Libraries
Added: May 27, 2022

2001 conference paper

Characterization of Material Properties of Woodfiber-Plastic Composites Exposed to Secondary Manufacturing Processes

Proceedings of the Sixth International Conference on Woodfiber-Plastic Composites, 239–247.

By: U. Buehlmann, D. Saloni & R. Lemaster

Event: Sixth International Conference on Woodfiber-Plastic Composites at Madison, WI on May 15-16, 2001

Source: NC State University Libraries
Added: May 27, 2022

2001 conference paper

Update of Process Monitoring and Control Research at NC State University

Proceedings of the 15th International Wood Machining Seminar, 511–522.

By: R. Lemaster, D. Saloni & S. Rodkwan

Event: 15th International Wood Machining Seminar on July 30 - August 1, 2001

Source: NC State University Libraries
Added: May 27, 2022

2001 conference paper

Wood fiber-plastic composites: machining and surface quality

Proceedings of the 15th International Wood Machining Seminar, 403–417.

By: U. Buehlmann, D. Saloni & R. Lemaster

Event: 15th International Wood Machining Seminar at Los Angeles, CA on July 30 - August 1, 2001

Source: NC State University Libraries
Added: May 27, 2022

Employment

Updated: May 12th, 2020 09:43

2014 - present

North Carolina State University Raleigh, NC, US
Associate Professor Forest Biomaterials

2007 - 2014

North Carolina State University Raleigh, NC, US
Assistant Professor Forest Biomaterials

2005 - 2007

North Carolina State University Raleigh, NC, US
Laboratory Manager Forest Biomaterials

2001 - 2005

North Carolina State University Raleigh, NC, US
Research Assistant Forest Biomaterials

2000 - 2001

North Carolina State University Raleigh, NC, US
Visiting Scientist Forest Biomaterials

1995 - 2000

Universidad Católica Andrés Bello Caracas, Distrito Capital, VE
Assistant Professor Industrial Engineering

Education

Updated: May 12th, 2020 09:49

North Carolina State University Raleigh, NC, US
Doctorate / Forest Biomaterials Forest Biomaterials

North Carolina State University Raleigh, NC, US
Master of Engineering Integrate Manufacturing System Engineering

Funding History

Funding history based on the linked ORCID record. Updated: May 12th, 2020 10:20

grant January 1, 2020 - January 1, 2022
NC Sustainable Pellet Production for Poultry
North Carolina Department of Agriculture
grant January 1, 2019 - January 1, 2021
Popolous based production of solid fuels
North Carolina Department of Agriculture
award January 1, 2019 - January 1, 2021
Lightweight and thermally insulating nanowood
U.S. Department of Energy
contract January 1, 2016 - January 1, 2020
Next Generation Logistics Systems for Delivering Optimal Biomass Feedstocks to Biorefining Industries in the Southeastern United States
U.S. Department of Energy

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.