Rajeev K Gupta

Effect of V Content on Corrosion Behavior of Al-V Alloys Produced by Mechanical Alloying and Subsequent Spark Plasma Sintering

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 171(3).

Improved Tribological Performance of Nitride-Reinforced Biocompatible Titanium-Niobium-Zirconium-Tantalum (TNZT) Alloys for Advanced Orthopedic Applications

METALS, 14(1).

Influence of Spatter on Porosity, Microstructure, and Corrosion of Additively Manufactured Stainless Steel Printed Using Different Island Size

Crystals.

Intergranular Corrosion of CNT-Reinforced and Laser Powder Bed Fusion-Printed 316L Stainless Steel

JOM, 76(1), 232–237.

(Corrosion Division Rusty Award for Mid-Career Excellence) Enhancing the Corrosion Resistance of Additively Manufactured Metallic Materials: The Role of Feedstock Modification

ECS Meeting Abstracts.

Age-hardening behavior, corrosion mechanisms, and passive film structure of nanocrystalline Al-V supersaturated solid solution

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 135, 1–12.

Enhanced wear and corrosion resistances of Al coated Mg alloy using high pressure cold sprayed commercially pure-zirconium coating

MATERIALS LETTERS, 346.

Evolution of surface film in AA2024-T3 after a long-term immersion in NaCl solution

CORROSION SCIENCE, 215.

Intergranular Corrosion of CNT-Reinforced and Laser Powder Bed Fusion-Printed 316L Stainless Steel

Vukkum, V. B., Ansell, T. Y., Nieto, A., & Gupta, R. K. (2023, October 4). JOM, Vol. 10.

Intergranular Corrosion of Feedstock Modified-Additively Manufactured Stainless Steel After Sensitization

CORROSION, 79(6), 624–636.

Microstructure and corrosion of CrFeMnV multi-principal element alloy

CORROSION SCIENCE, 222.

Pitting corrosion behavior and corrosion protection performance of cold sprayed double layered noble barrier coating on magnesium-based alloy in chloride containing solutions

JOURNAL OF MAGNESIUM AND ALLOYS, 11(9), 3099–3119.

Recent Advances in Material, Manufacturing, and Machine Learning

Recent Advances in Material, Manufacturing, and Machine Learning

Study on the corrosion behavior of cold sprayed aluminum-based coatings on Mg-based alloy in chloride containing solution: Effect of N-2 processing gas temperature

CORROSION SCIENCE, 223.

Surface Film Formation on Al-V Alloys with Far-From-Equilibrium Microstructure

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 170(3).

Time-Dependent Corrosion Behavior of Aluminum Using Advanced Electrochemical and Characterization Techniques

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 170(9).

3D printed carbon nanotube reinforced stainless steel via selective lase melting

Nieto, A., Vukkum, V. B., Jalagam, P., Nema, K., Budan, J., Gupta, R. K., & Ansell, T. Y. (2022, August 10). MRS COMMUNICATIONS, Vol. 8.

Aluminum alloys with high elastic modulus

MATERIALS LETTERS, 320.

Corrosion Management: Current Status and its Relevance for Assets Operating in a Circular Economy, Corrosion Management for a Sustainable Future

In C. Taylor & A. N. Sanchez (Eds.), Corrosion Management for a Sustainable Future. NACE Publications.

Corrosion Performance of Additively Manufactured 316L Stainless Steel Produced By Feedstock Modification

ECS Meeting Abstracts.

Corrosion behavior of a bulk nanocrystalline Al-Fe alloy

CORROSION SCIENCE, 209.

Corrosion behavior of age hardening aluminum alloys produced by high-energy ball milling

JOURNAL OF ALLOYS AND COMPOUNDS, 900.

Corrosion behavior of an in situ consolidated nanocrystalline Al-V alloy

NPJ MATERIALS DEGRADATION, 6(1).

Corrosion performance of feedstock modified - Additively manufactured stainless steel

CORROSION SCIENCE, 209.

Corrosion-Resistant Sacrificial Metallic Coatings Produced By Cold-Spray for Al Alloys

ECS Meeting Abstracts.

Corrosion-resistant metallic coatings for aluminum alloys by cold spray

Corrosion Science, 209, 110720.

Effect of Graphene Morphology on the Microstructure, Mechanical and Tribological Behavior of Nickel Matrix Composites

Patil, A., Nartu, M. S. K. K. Y., Ozdemir, F., Banerjee, R., Gupta, R. K., & Borkar, T. (2022, October 10). JOM, Vol. 10.

Enhanced corrosion resistance of additively manufactured stainless steel by modification of feedstock

NPJ MATERIALS DEGRADATION, 6(1).

Influence of vanadium addition on corrosion behavior of high-energy ball milled aluminum alloy 2024

Ozdemir, F., & Gupta, R. K. (2022, September 25). MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, Vol. 9.

Need of an Inert Atmosphere for High-Energy Ball Milling of Al Alloys

Ozdemir, F., Christudasjustus, J., Vukkum, V. B., Okuyucu, H., & Gupta, R. K. (2022, September 8). JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 9.

Passive Film Structure and Corrosion Initiation in Al Alloys with Far-from-Equilibrium Compositions and Microstructures

ECS Meeting Abstracts.

Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: Effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure

[Review of ]. MATERIALS & DESIGN, 221.

Structure and Composition of the Passive Film Studied Using a Combination of X-Ray Photoelectron Spectroscopy, Secondary Ion Mass Spectrometry, and Scanning Transmission Electron Microscopy

ECS Meeting Abstracts.

The influence of spark plasma sintering temperatures on the microstructure, hardness, and elastic modulus of the nanocrystalline Al-xV alloys produced by high-energy ball milling

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 122, 68–76.

cardiGAN: A generative adversarial network model for design and discovery of multi principal element alloys

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 125, 81–96.

A low-cost, low-density, and corrosion resistant AlFeMnSi compositionally complex alloy

NPJ MATERIALS DEGRADATION, 5(1).

Corrosion Behavior and Hardness of Binary Mg Alloys Produced via High-Energy Ball-Milling and Subsequent Spark Plasma Sintering

CORROSION, 77(2), 228–241.

Corrosion behavior of AA5083 produced by high-energy ball milling

JOURNAL OF ALLOYS AND COMPOUNDS, 857.

Effect of V content on corrosion behavior of high-energy ball milled AA5083

CORROSION SCIENCE, 186.

Enhancement of the mechanical properties of graphene nanoplatelet (GNP) reinforced nickel matrix nanocomposites

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 817.

Improvement of Wear, Pitting Corrosion Resistance and Repassivation Ability of Mg-Based Alloys Using High Pressure Cold Sprayed (HPCS) Commercially Pure-Titanium Coatings

COATINGS, 11(1).

On the dynamic passivity and corrosion resistance of a low cost and low density multi-principal-element alloy produced via commodity metals

ELECTROCHEMISTRY COMMUNICATIONS, 125.

Sluggish precipitation strengthening in Al-Li alloy with a high concentration of Mg

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 11, 1806–1815.

Spark plasma sintering of Fe–Si–B–Cu–Nb / Finemet based alloys

Intermetallics, 129, 107035.

Strengthening effects of multi-walled carbon nanotubes reinforced nickel matrix nanocomposites

JOURNAL OF ALLOYS AND COMPOUNDS, 876.

The Effect of Milling Time and Speed on Solid Solubility, Grain Size, and Hardness of Al-V Alloys

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 30(4), 3144–3158.

The Effect of Titanium Carbide and Spark Plasma Sintering Processing on Nickel–Titanium Carbide Composites

In T. S. Srivatsan, W. C. Harrigan Jr/, & S. Hunyadi Murph (Eds.), Metal-Matrix Composites: Advances in Analysis, Measurement, and Observations (pp. 65–73).

Tribological Behavior of Carbon-Based Nanomaterial-Reinforced Nickel Metal Matrix Composites

MATERIALS, 14(13).

Tribological Behavior of In Situ Processed Ni-Ti-C Nanocomposites

Tribology Transactions, 64(1), 53–64.

A low-cost, low-density and corrosion resistant compositionally complex alloy: AlFeMnSi

O'Brien, S., Esteves, L., Birbilis, N., & Gupta, R. (2020, January 8). (Vol. 1). Vol. 1.

Bulk-nano spark plasma sintered Fe-Si-B-Cu-Nb based magnetic alloys

Intermetallics, 124, 106869.

Enhanced corrosion resistance and surface bioactivity of AZ31B Mg alloy by high pressure cold sprayed monolayer Ti and bilayer Ta/Ti coatings in simulated body fluid

Materials Chemistry and Physics, 256, 123627.

High temperature oxidation behavior of aluminized Haynes 230

Corrosion Science, 174, 108835.

Intergranular to Intragranular Pitting Corrosion Transition Mechanism of Sensitized AA5083 at 150 °C

Metals, 10(8), 1082.

Mechanical and Tribological Behavior of Mechanically Alloyed Ni-TiC Composites Processed via Spark Plasma Sintering

MATERIALS, 13(22).

Modification of surface hardness, wear resistance and corrosion resistance of cold spray Al coated AZ31B Mg alloy using cold spray double layered Ta/Ti coating in 3.5 wt % NaCl solution

Corrosion Science, 176, 109029.

Review—Corrosion-Resistant Metastable Al Alloys: An Overview of Corrosion Mechanisms

Journal of The Electrochemical Society, 167(8), 081504.

Spark plasma sintering of a high-energy ball milled Mg-10 wt% Al alloy

Journal of Magnesium and Alloys, 8(2), 319–328.

Study of Corrosion Behavior and In Vitro Bioactivity of Single NbSi2 and Duplex NbSi2/Nb5Si3 Coatings on Nb Substrates for Biomedical Applications

Protection of Metals and Physical Chemistry of Surfaces, 56(3), 628–637.

Effect of Aluminizing on the High-Temperature Oxidation Behavior of an Alumina-Forming Austenitic Stainless Steel

JOM, 71(1), 109–115.

Spark plasma sintering of low modulus titanium-niobium-tantalum-zirconium (TNTZ) alloy for biomedical applications

Materials & Design, 183, 108163.

A Surface Study of the Native Oxide upon a Compositionally Complex Alloy

CORROSION, 74(12), 1312–1317.

A closer look at the role of Zn in the microstructure and corrosion of an Al-Cu-Li alloy

Corrosion Science, 145, 220–231.

Antibacterial activities and corrosion behavior of novel PEO/nanostructured ZrO2 coating on Mg alloy

Transactions of Nonferrous Metals Society of China, 28(8), 1571–1581.

Correlation of intergranular corrosion behaviour with microstructure in Al-Cu-Li alloy

Corrosion Science, 139, 215–226.

Corrosion and Mechanical Properties of Al-5 At. Pct Cr Produced by Cryomilling and Subsequent Consolidation at Various Temperatures

Metallurgical and Materials Transactions A, 49(7), 3058–3065.

Effects of Al2O3 diffusion barrier layer (including Y-containing small oxide precipitates) and nanostructured YSZ top coat on the oxidation behavior of HVOF NiCoCrAlTaY/APS YSZ coatings at 1100 °C

Corrosion Science, 144, 13–34.

Excellent corrosion resistance and hardness in Al alloys by extended solid solubility and nanocrystalline structure

Materials Research Letters, 6(1), 79–83.

High hardness and thermal stability of nanocrystalline Mg–Al alloys synthesized by the high-energy ball milling

Materialia, 4, 406–416.

Influence of the V content on microstructure and hardness of high-energy ball milled nanocrystalline Al-V alloys

Journal of Alloys and Compounds, 760, 63–70.

Investigation of Corrosion Protection Performance of Multiphase PEO (Mg2SiO4, MgO, MgAl2O4) Coatings on Mg Alloy Formed in Aluminate-Silicate- based Mixture Electrolyte

Protection of Metals and Physical Chemistry of Surfaces, 54(3), 425–441.

Thermal stability of nanocrystalline Al-5at.%Ni and Al-5at.%V alloys produced by high-energy ball milling

Journal of Alloys and Compounds, 744, 651–657.

(Invited) High Strength and Corrosion Resistant Light Alloys Via High-Energy Ball Milling

ECS Meeting Abstracts.

Aluminum containing Na2CrO4: Inhibitor release on demand

Materials Letters, 205, 194–197.

An Overview of High-energy Ball Milled Nanocrystalline Aluminum Alloys

In SpringerBriefs in Materials.

Corrosion Behavior and Hardness of Al–M (M: Mo, Si, Ti, Cr) Alloys

Acta Metallurgica Sinica (English Letters), 30(4), 333–341.

An Overview of New Progresses in Understanding Pipeline Corrosion

Corrosion Science and Technology, 15(6), 271–280.

Occurrence of Anodic Current and Corrosion of Steel in Aqueous Media Under Fluctuating Cathodic Protection Potentials

CORROSION, 72(10), 1243–1251.

The Influence of Grain Size and Grain Orientation on Sensitization in AA5083

Corrosion, 72(2), 160–168.

Corrosion Behaviour of Al-4Mg-1Cu (wt%) Microalloyed with Si and Ag

Advanced Engineering Materials.

Corrosion behaviour and hardness of in situ consolidated nanostructured Al and Al-Cr alloys produced via high-energy ball milling

Corrosion Science, 98, 643–650.

Influence of cooling rate on the microstructure and corrosion behavior of Al–Fe alloys

Corrosion Science, 100, 396–403.

Simultaneous improvement in the strength and corrosion resistance of Al via high-energy ball milling and Cr alloying

Materials & Design, 84, 270–276.

The influence of nanocrystalline structure and processing route on corrosion of stainless steel: A review

Corrosion Science, 92, 1–15.

Effect of Vacuum System Base Pressure on Corrosion Resistance of Sputtered Al Thin Films

Journal of The Electrochemical Society, 161(4), C195–C200.

Influence of microalloying additions on Al-Mg alloy. Part 1: Corrosion and electrochemical response

Corrosion Engineering Science and Technology, 49(4), 254–262.

Influence of microalloying additions on Al-Mg alloy. Part 2: Phase analysis and sensitization behaviour

Corrosion Engineering Science and Technology, 49(4), 263–268.

Studying the cathodic disbondment of coatings using electrochemical impedance spectroscopy

Annual Conference of the Australasian Corrosion Association 2014: Corrosion and Prevention 2014. http://www.scopus.com/inward/record.url?eid=2-s2.0-84919343962&partnerID=MN8TOARS

The effect of chromate on the pitting susceptibility of AA7075-T651 studied using potentiostatic transients

Corrosion Science, 82, 197–207.

Theoretical study of the influence of microalloying on sensitization of AA5083 and moderation of sensitization of a model Al-Mg-Mn alloy via Sr additions

Corrosion, 70(4), 402–413.

An overview of methods for simulating and evaluating pipeline corrosion

Annual Conference of the Australasian Corrosion Association 2013: Corrosion and Prevention 2013, 513–521. http://www.scopus.com/inward/record.url?eid=2-s2.0-84914674678&partnerID=MN8TOARS

Effect of nanocrystalline structure on the corrosion of a Fe20Cr alloy

International Journal of Electrochemical Science, 8(5), 6791–6806. http://www.scopus.com/inward/record.url?eid=2-s2.0-84878702475&partnerID=MN8TOARS

Effect of the degree of crystallinity on the electrochemical behavior of Mg65Cu25Y10 and Mg70Zn 25Ca5 bulk metallic glasses

Corrosion, 69(8), 781–792.

Electrochemical and corrosion response of commercially pure aluminum alloyed with binary additions of strontium

Journal of the Electrochemical Society, 160(8).

Electrochemical behaviour of the β-phase intermetallic (Mg2Al3) as a function of pH as relevant to corrosion of aluminium-magnesium alloys

Corrosion Science, 70, 290–293.

Imparting sensitization resistance to an Al-5Mg alloy via neodymium additions

Corrosion, 69(1), 4–8.

Influence of Mg content on the sensitization and corrosion of Al-xMg(-Mn) alloys

Corrosion, 69(11), 1081–1087.

Influence of alloyed Nd content on the corrosion of an Al-5Mg alloy

Corrosion Science, 73, 181–187.

Quantification of sensitization in AA5083-H131 via imaging ga-embrittled fracture surfaces

Corrosion, 69(4), 396–402.

Characterisation of the evolution of microstructure and electrochemical properties for 7xxx aluminium alloys

Annual Conference of the Australasian Corrosion Association 2012, 646–651. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876883337&partnerID=MN8TOARS

Electrochemical behavior and localized corrosion associated with Mg2Si particles in Al and Mg alloys

ECS Electrochemistry Letters, 1(1).

Electrochemical characteristics of nano and microcrystalline Fe-Cr alloys

JOURNAL OF MATERIALS SCIENCE, 47(16), 6118–6124.

General aspects of the corrosion of aluminium alloys

Annual Conference of the Australasian Corrosion Association 2012, 696–702. http://www.scopus.com/inward/record.url?eid=2-s2.0-84876835236&partnerID=MN8TOARS

Metastable pitting characteristics of aluminium alloys measured using current transients during potentiostatic polarisation

Electrochimica Acta, 66, 245–254.

Oxidation Resistance of Nanocrystalline Alloys

In H. Shih (Ed.), Corrosion Resistance.

Relating the early evolution of microstructure with the electrochemical response and mechanical performance of a Cu-rich and Cu-lean 7xxx aluminum alloy

Journal of the Electrochemical Society, 159(11).