Works (134)

Updated: March 28th, 2024 17:29

2024 journal article

Mechanisms for high creep resistance in alumina forming austenitic (AFA) alloys

ACTA MATERIALIA, 263.

co-author countries: United States of America 🇺🇸
author keywords: Alumina forming austenitic alloys; Creep; Precipitates; Dislocation; Microscopy; Synchrotron
Sources: Web Of Science, ORCID
Added: January 2, 2024

2024 journal article

Unprecedented electrical performance of friction-extruded copper-graphene composites

MATERIALS & DESIGN, 237.

By: B. Gwalani n, X. Li*, A. Nittala*, W. Choi*, M. Reza-E-Rabby*, J. Atehortua, A. Bhattacharjee*, M. Pole* ...

co-author countries: United States of America 🇺🇸
author keywords: Copper; Graphene; Temperature coefficient of resistance; Electrical conductivity; Defect density; Shear processing; Friction extrusion
Sources: Web Of Science, ORCID
Added: January 22, 2024

2023 journal article

Circumventing strength-ductility paradox in high entropy alloys through deformation processing

JOURNAL OF ALLOYS AND COMPOUNDS, 933.

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: Transmission electron microscopy; Tensile testing; Fractography; High entropy alloy; Stationary friction processing; Strength ductility index
Sources: Web Of Science, ORCID
Added: November 28, 2022

2023 journal article

Enhanced extreme temperature bending and delamination resistance of GFRP composites through z-directional aligned nano-reinforcement: Emphasizing the effects of CNT functionalization

COMPOSITES SCIENCE AND TECHNOLOGY, 244.

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: Carbon nanotubes; Delamination; Mechanical properties; Fractography; Cryo- and elevated-temperatures
Sources: Web Of Science, ORCID
Added: November 13, 2023

2023 journal article

Exceptional enhancement of mechanical properties in high-entropy alloys via thermodynamically guided local chemical ordering

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 120(23).

co-author countries: France 🇫🇷 Taiwan, Province of China 🇹🇼 United States of America 🇺🇸
author keywords: high-entropy alloys; thermodynamics; chemical ordering
Sources: Web Of Science, ORCID
Added: August 28, 2023

2023 article

Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel

Srivastava, A., Das, H., Tamayo, D. R., Li, L., Pole, M., Gwalani, B., … Reza-E-Rabby, M. (2023, August 10). INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 8.

By: A. Srivastava*, H. Das*, D. Tamayo*, L. Li*, M. Pole*, B. Gwalani n, A. Soulami*, J. Santos*, K. Kappagantula*, M. Reza-E-Rabby*

co-author countries: United States of America 🇺🇸
author keywords: Friction riveting (fric-riveting); AA6061 aluminum alloys; DP590 steel; Finite element modeling
Sources: Web Of Science, ORCID
Added: August 28, 2023

2023 article

Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel (vol 128, pg 7, 2023)

Srivastava, A., Das, H., Tamayo, D. R., Li, L., Pole, M., Gwalani, B., … Reza-E-Rabby, M. (2023, October). INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 128, pp. 2913–2913.

By: A. Srivastava*, H. Das*, D. Tamayo*, L. Li*, M. Pole*, B. Gwalani n, A. Soulami*, J. Santos*, K. Kappagantula*, M. Reza-E-Rabby*

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: March 11, 2024

2023 journal article

High strain-rate driven nano-tubular architecture in NiMn alloy for supercapacitor electrodes

CHEMICAL ENGINEERING JOURNAL, 465.

By: A. Thomas*, G. Perumal*, D. Padmanaban*, X. Ma*, A. Kumar*, R. Sharma, A. Ayyagari*, B. Gwalani n, H. Arora*

co-author countries: United Kingdom of Great Britain and Northern Ireland 🇬🇧 Ireland 🇮🇪 India 🇮🇳 United States of America 🇺🇸
author keywords: Solid-state nano -moulding; Physical deformation; Nano -tubular architecture; Electrochemical dealloying; Supercapacitors
Sources: Web Of Science, ORCID
Added: May 30, 2023

2023 journal article

Impact of environmental oxygen on nanoparticle formation and agglomeration in aluminum laser ablation plumes

JOURNAL OF CHEMICAL PHYSICS, 159(17).

By: E. Kautz n, A. Zelenyuk*, B. Gwalani n, M. Olszta*, M. Phillips*, M. Manard, C. Kimblin, S. Harilal*

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: November 27, 2023

2023 journal article

Introducing local chemical ordering to trigger a planar-slip-initiated strain-hardening mechanism in high entropy alloys

ACTA MATERIALIA, 258.

co-author countries: United States of America 🇺🇸
author keywords: High entropy alloys; Complex concentrated alloys; Local ordering; Planar slip; Deformation; Strain hardening
Sources: Web Of Science, ORCID
Added: October 2, 2023

2023 review

Investigating zirconium alloy corrosion with advanced experimental techniques: A review

[Review of ]. JOURNAL OF NUCLEAR MATERIALS, 585.

By: E. Kautz n, B. Gwalani n, Z. Yu*, T. Varga*, K. Geelhood*, A. Devaraj*, D. Senor*

co-author countries: United States of America 🇺🇸
author keywords: Zirconium; Oxidation; Corrosion behavior; Hydrogen pick-up; Oxide; metal interface; ZrO2
Sources: Web Of Science, ORCID
Added: August 14, 2023

2023 journal article

Limiting oxidation of high entropy alloy via high strain-rate deformation: Insights from electrochemical impedance spectroscopy

MATERIALS CHEMISTRY AND PHYSICS, 294.

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: High entropy alloy; Transmission electron microscopy; Electron back-scattered diffraction; Oxidation; Electrochemical impedance spectroscopy
Sources: Web Of Science, ORCID
Added: December 19, 2022

2023 journal article

Mass transport in a highly immiscible alloy on extended shear deformation

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 134, 197–208.

By: M. Song*, J. Liu*, X. Ma*, Q. Pang*, M. Olszta*, J. Silverstein*, M. Pallaka*, P. Sushko* ...

co-author countries: United States of America 🇺🇸
author keywords: Tribology; Immiscible alloys; Nanostructures; Shear deformation; Forced mixing; Atom probe
Sources: Web Of Science, ORCID
Added: August 22, 2022

2023 journal article

Microstructural evolution in shear-punch tests: A comparative study of pure Cu and Cu-Cr alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 886.

By: J. Escobar*, J. Silverstein*, F. Ishrak n, L. Li*, A. Soulami*, S. Li*, A. Yu*, S. Mathaudhu* ...

co-author countries: United States of America 🇺🇸
author keywords: Shear-punch test; CSL Sigma 3 twins; Dense dislocation walls; Deformation cells
Sources: Web Of Science, ORCID
Added: September 16, 2023

2023 journal article

Modes of strain accommodation in Cu-Nb multilayered thin film on indentation and cyclic shear

SURFACES AND INTERFACES, 37.

By: M. Pole*, Z. Lu*, T. Ajantiwalay*, M. Olszta*, S. Tripathi*, A. Yu*, H. Mehta*, T. Wang* ...

co-author countries: United States of America 🇺🇸
author keywords: Cu-Nb layered thin films; Coefficient of friction; Cyclic shear; Deformation mechanism; Detwinning
Sources: Web Of Science, ORCID
Added: April 11, 2023

2023 journal article

Non-polar ether-based electrolyte solutions for stable high-voltage non-aqueous lithium metal batteries

Nature Communications.

By: Z. Li*, H. Rao*, R. Atwi*, B. Sivakumar*, B. Gwalani*, S. Gray*, K. Han*, T. Everett* ...

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: April 19, 2023

2023 article

Oxygen-Vacancy Abundant Nanoporous Ni/NiMnO3/MnO2@NiMn Electrodes with Ultrahigh Capacitance and Energy Density for Supercapacitors

Thomas, A., Kumar, A., Perumal, G., Sharma, R. K., Manivasagam, V., Popat, K., … Arora, H. S. (2023, January 20). ACS APPLIED MATERIALS & INTERFACES, Vol. 1.

By: A. Thomas*, A. Kumar*, G. Perumal*, R. Sharma*, V. Manivasagam*, K. Popat*, A. Ayyagari*, A. Yu* ...

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: oxygen vacancies; physical deformation; atom probe tomography; density functional theory; hierarchical microstructure
Sources: Web Of Science, ORCID
Added: March 6, 2023

2023 journal article

Shear deformation of pure-Cu and Cu/Nb nano-laminates using micromechanical testing

SCRIPTA MATERIALIA, 230.

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: April 11, 2023

2023 journal article

Simultaneously improved electrical and mechanical performance of hot-extruded bulk scale aluminum-graphene wires

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 293.

By: A. Nittala*, J. Smith*, B. Gwalani n, J. Silverstein*, F. Kraft* & K. Kappagantula*

co-author countries: United States of America 🇺🇸
author keywords: Aluminum metal matrix composite; Graphene; Electrical conductivity; Hot extrusion
Sources: Web Of Science, ORCID
Added: September 11, 2023

2022 conference paper

A Finite Difference Analysis of the Effect of Graphene Additions on the Electrical Conductivity of Polycrystalline Copper

TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings, 705–712.

By: W. Frazier*, B. Gwalani*, J. Escobar*, J. Silverstein* & K. Kappagantula*

co-author countries: United States of America 🇺🇸
author keywords: Microstructure; Materials simulation; Electronic materials
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 journal article

An Approach for the Microstructure-Sensitive Simulation of Shear-Induced Deformation and Recrystallization in Al–Si Alloys

Metallurgical and Materials Transactions A, 53, 1450–1461.

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 journal article

Atomistic understanding of extreme strain shear deformation of Copper-Graphene composites

Carbon, 198, 63–69.

co-author countries: United States of America 🇺🇸
author keywords: Graphene; Deformation processing; Tribometer; Electrical conductivity; Wear; Solid phase processing
Source: ORCID
Added: August 1, 2022

2022 journal article

Decoupling of strain and temperature effects on microstructural evolution during high shear strain deformation

Materialia.

By: A. Yu*, M. Pole*, J. Atehortua, K. Bozhilov*, J. Liu*, J. Silverstein*, S. Mukherjee*, S. Mathaudhu*, A. Devaraj*, B. Gwalani*

co-author countries: United States of America 🇺🇸
author keywords: Shear strain deformation; forced mixing; phase transformation; solid phase processing; tribology
Source: ORCID
Added: August 1, 2022

2022 journal article

Extended Shear Deformation of the Immiscible Cu–Nb Alloy Resulting in Nanostructuring and Oxygen Ingress with Enhancement in Mechanical Properties

ACS Omega, 7(16), 13721–13736.

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: August 1, 2022

2022 journal article

Extreme shear deformation enables ultra-fast riveting of high strength aluminum alloys

Journal of Manufacturing Processes, 75, 814–825.

co-author countries: United States of America 🇺🇸
author keywords: Shear deformation; Riveting; High-strength aluminum alloys; Dynamic recrystallization; Amorphization
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 journal article

Formation and dissociation of shear-induced high-energy dislocations: insight from molecular dynamics simulations

Modelling and Simulation in Materials Science and Engineering, 30(2), 025012.

By: N. Chen, S. Hu, W. Setyawan, B. Gwalani*, P. Sushko & S. Mathaudhu

author keywords: large shear deformation; dislocations; defect substructure evolution; molecular dynamics
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 article

Gas-phase oxidation and nanoparticle formation in multi-element laser ablation plumes

Kautz, E. J., Zelenyuk, A., Gwalani, B., Phillips, M. C., & Harilal, S. S. (2022, October 20). PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 10.

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: November 7, 2022

2022 journal article

High Oxidation Resistance of AlCoCrFeNi High Entropy Alloy through Severe Shear Deformation Processing

Journal of Alloys and Compounds, 917, 165385.

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: High entropy alloy; Thermal oxidation; Stationary friction processing
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 journal article

Highly complex magnetic behavior resulting from hierarchical phase separation in AlCo (Cr) FeNi high-entropy alloys

Iscience, 25(4), 104047.

By: Q. Lan*, A. Kovacs*, J. Caron*, H. Du*, D. Song*, S. Dasari*, B. Gwalani*, V. Chaudhary* ...

co-author countries: China 🇨🇳 Germany 🇩🇪 Singapore 🇸🇬 United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 journal article

In situ observations of grain growth and recovery in cold sprayed Ni-Y(2)O(3 )and CP-Ni coatings using hot-stage TEM

MATERIALS CHARACTERIZATION, 192.

By: A. Yu*, K. Ross, K. Johnson, B. Jasthi & B. Gwalani*

co-author countries: United States of America 🇺🇸
author keywords: Thermal stability; Cermet coatings; Cold spray; Hot stage TEM; Nano Y(2)O(3 )particles
Sources: Web Of Science, ORCID
Added: October 17, 2022

2022 journal article

Metallurgical joining of immiscible system: Pure Mg and pure Fe

Materials Characterization, 187, 111821.

By: H. Das*, B. Gwalani*, X. Ma* & P. Upadhyay*

co-author countries: United States of America 🇺🇸
author keywords: Friction stir assisted scribe technique (FaST); Transmission electron microscopy (TEM); Electron backscattering diffraction (EBSD); Magnesium; Iron
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 article

Phase Stability and Kinetics of Topotactic Dual Ca2+-Na+ Ion Electrochemistry in NaSICON NaV2(PO4)3

Blanc, L. E., Choi, Y., Shyamsunder, A., Key, B., Lapidus, S. H., Li, C., … Nazar, L. F. (2022, December 30). CHEMISTRY OF MATERIALS, Vol. 12.

By: L. Blanc*, Y. Choi*, A. Shyamsunder*, B. Key*, S. Lapidus*, C. Li*, L. Yin*, X. Li* ...

co-author countries: Canada 🇨🇦 United States of America 🇺🇸
Sources: ORCID, Web Of Science
Added: January 10, 2023

2022 journal article

Rapid assessment of interfacial stabilization mechanisms of metastable precipitates to accelerate high-temperature Al-alloy development

Materials Research Letters, 10(12), 771–779.

co-author countries: United States of America 🇺🇸
author keywords: Solute-segregation; structural materials; phase transformation; in-situ characterization; atom probe tomography
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 journal article

Review of recent progress on in situ TEM shear deformation: a retrospective and perspective view

Journal of Materials Science, 57, 12177–12201.

By: S. Li*, C. Powell*, S. Mathaudhu*, B. Gwalani*, A. Devaraj* & C. Wang*

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 18, 2022

2022 journal article

Shear strain gradient in Cu/Nb nanolaminates: Strain accommodation and chemical mixing

Acta Materialia.

co-author countries: United States of America 🇺🇸
author keywords: Nanolaminate; Intragranular plasticity; Interfacial plasticity; Strain gradient; Forced chemical mixing
Source: ORCID
Added: August 1, 2022

2022 report

Solid Phase Processing of Lead-Free Brass with Carbon Additives

By: M. Reza-E-Rabby*, A. Srivastava*, M. Pole*, A. Nittala*, B. Gwalani* & K. Kappagantula*

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: June 10, 2023

2022 journal article

Temperature-dependent formation of gradient structures with anomalous hardening in an Al-Si alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 858.

co-author countries: United States of America 🇺🇸
author keywords: Gradient structure; Temperature effect; Gradient steepness; Surface severe deformation; Oxide dispersion strengthening
Sources: Web Of Science, ORCID
Added: November 7, 2022

2022 journal article

Thermal stability and mechanical properties of cold-sprayed Nickel-Yttria coating

Scripta Materialia.

co-author countries: United States of America 🇺🇸
author keywords: Cermet coating; Cold spray; Nano Yttria; Transmission electron microscopy; Atom probe tomography
Source: ORCID
Added: August 1, 2022

2021 journal article

Co-introduction of precipitate hardening and TRIP in a TWIP high-entropy alloy using friction stir alloying

Scientific Reports, 11, 1579.

By: T. Wang*, S. Shukla*, B. Gwalani*, S. Sinha*, S. Thapliyal*, M. Frank*, R. Mishra*

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 22, 2022

2021 report

Cold Spray for Mitigation and Repair of Spent Nuclear Fuel Dry Storage Canisters

By: K. Ross*, M. Pole*, B. Gwalani*, T. Montoya*, E. Karasz* & R. Schaller*

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: January 10, 2023

2021 journal article

Discontinuous precipitation leading to nano-rod intermetallic precipitates in an Al0.2Ti0.3Co1.5CrFeNi1.5 high entropy alloy results in an excellent strength-ductility combination

Materials Science and Engineering: A, 805, 140551.

By: S. Dasari, Y. Chang, A. Jagetia, A. Vishal Soni, B. Gwalani, S. Gorsse, A. Yeh, R. Banerjee

Source: NC State University Libraries
Added: August 22, 2022

2021 report

Evaluating Effects of Shear Processing on 2D Crystalline Materials in 3D Metal Matrices: Atomistic Understanding of High Shear Deformation of Copper Graphene Composites

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: June 23, 2023

2021 journal article

Hierarchical phase evolution in a lamellar Al0. 7CoCrFeNi high entropy alloy involving competing metastable and stable phases

Scripta Materialia, 204, 114137.

By: K. Srimark*, S. Dasari*, A. Sharma*, P. Wangyao*, B. Gwalani*, T. Rojhirunsakool*, S. Gorsse*, R. Banerjee*

co-author countries: France 🇫🇷 Thailand 🇹🇭 United States of America 🇺🇸
author keywords: High entropy alloys; Complex concentrated alloys; Eutectic microstructure; Widmanstatten; Intermetallic precipitates
Sources: Web Of Science, ORCID
Added: August 22, 2022

2021 journal article

High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy

Acta Materialia, 219, 117234.

By: B. Gwalani*, S. Dasari*, A. Sharma*, V. Soni*, S. Shukla*, A. Jagetia*, P. Agrawal*, R. Mishra*, R. Banerjee

co-author countries: United States of America 🇺🇸
author keywords: High entropy alloys; Precipitation strengthening; Ductility; Twins; High strength
Sources: Web Of Science, ORCID
Added: August 22, 2022

2021 report

Highly Complex Magnetic Structures Resulting From Hierarchical Phase Separation in AlCo (Cr) FeNi High Entropy Alloys

(ArXiv Preprint No. 2104.00943).

By: Q. Lan, A. Kovacs, J. Caron, H. Du, D. Song, S. Dasari, B. Gwalani, V. Chaudhary ...

Sources: NC State University Libraries, ORCID
Added: August 18, 2022

2021 journal article

In Situ Probing Potassium-Ion Intercalation-Induced Amorphization in Crystalline Iron Phosphate Cathode Materials

Nano Letters, 21(18), 7579–7586.

By: B. Özdogru*, Y. Cha*, B. Gwalani*, V. Murugesan*, M. Song* & Ö. Çapraz*

co-author countries: United States of America 🇺🇸
author keywords: phase transformation; iron phosphate; amorphous; crystalline; potassium-ion batteries; electrochemical strains; X-ray diffraction
MeSH headings : Electrodes; Ions; Iron; Phosphates; Potassium
Sources: Web Of Science, ORCID
Added: August 22, 2022

2021 journal article

In-situ TEM observation of shear induced microstructure evolution in Cu-Nb alloy

Scripta Materialia, 205, 114214.

co-author countries: United States of America 🇺🇸
author keywords: In-situ TEM; Shear deformation; Crystal defects; Dual phases
Source: ORCID
Added: August 1, 2022

2021 journal article

Influence of fine-scale B2 precipitation on dynamic compression and wear properties in hypo-eutectic Al0. 5CoCrFeNi high-entropy alloy

Journal of Alloys and Compounds, 853, 157126.

By: B. Gwalani*, T. Torgerson*, S. Dasari*, A. Jagetia*, M. Nartu*, S. Gangireddy*, M. Pole*, T. Tianhao Wang, R. Banerjee*

co-author countries: United States of America 🇺🇸
author keywords: High entropy alloys; Wear properties; Dynamic testing; Precipitation strengthening; Kolsky test
Sources: Web Of Science, ORCID
Added: August 22, 2022

2021 journal article

Insights into Defect-Mediated Nucleation of Equilibrium B2 Phase in Face-Centered Cubic High-Entropy Alloys

JOM, 73, 2320–2331.

co-author countries: France 🇫🇷 Taiwan, Province of China 🇹🇼 United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 18, 2022

2021 journal article

Interfacial reaction during friction stir assisted scribe welding of immiscible Fe and Mg alloy system

Scientific Reports, 11, 1588.

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 22, 2022

2021 journal article

Lattice misorientation evolution and grain refinement in Al-Si alloys under high-strain shear deformation

Materialia, 18, 101146.

By: B. Gwalani*, W. Fu*, M. Olszta*, J. Silverstein*, D. Yadav*, P. Manimunda*, A. Guzman*, K. Xie* ...

co-author countries: United States of America 🇺🇸
author keywords: Solid phase processing; Tribometer; Severe shear deformation; Crystal plasticity; Al-Si alloys; Nanostructure; Nonequilibrium structures
Source: ORCID
Added: August 1, 2022

2021 journal article

Mechanistic insights into selective oxidation and corrosion of multi-principal element alloys from high resolution and in situ microscopy

Materialia, 18, 101148.

By: E. Kautz*, D. Schreiber*, A. Devaraj* & B. Gwalani*

co-author countries: United States of America 🇺🇸
author keywords: Multi-principal element alloys; High entropy alloys; Oxidation; Corrosion
Source: ORCID
Added: August 1, 2022

2021 journal article

Metastable orientation relationships in thin film Cu-Cr bilayers

Scripta Materialia, 194, 113635.

co-author countries: United States of America 🇺🇸
author keywords: Epitaxy; Multilayer thin films; Copper; Interface structure; Ab initio calculation
Sources: Web Of Science, ORCID
Added: August 18, 2022

2021 journal article

Molecular-scale investigation of the oxidation behavior of chromia-forming alloys in high-temperature CO2

Npj Materials Degradation.

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: August 1, 2022

2021 journal article

Multimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloy

Journal of Alloys and Compounds, 887, 161351.

By: J. Escobar*, B. Gwalani*, M. Olszta*, J. Silverstein*, N. Overman*, L. Bergmann*, J. dos Santos*, P. Staron* ...

co-author countries: Germany 🇩🇪 United States of America 🇺🇸
author keywords: Al-4Si; Friction stir processing; Geometric dynamic recrystallization; Grain fragmentation; Synchrotron X-ray diffraction
Sources: Web Of Science, ORCID
Added: August 18, 2022

2021 journal article

Nanomechanical scratching induced local shear deformation and microstructural evolution in single crystal copper

Applied Surface Science, 562, 150132.

co-author countries: United States of America 🇺🇸
author keywords: Atomic force microscopy; Scratch; Nano-cutting; Shear; Copper; Subsurface
Source: ORCID
Added: August 1, 2022

2021 journal article

Ordering-mediated local nano-clustering results in unusually large Hall-Petch strengthening coefficients in high entropy alloys

Materials Research Letters, 9(5), 213–222.

By: A. Jagetia*, M. Nartu*, S. Dasari*, A. Sharma*, B. Gwalani* & R. Banerjee*

co-author countries: United States of America 🇺🇸
author keywords: Hall-Petch strengthening; high entropy alloys; complex concentrated alloys; clustering; ordering
Sources: Web Of Science, ORCID
Added: August 18, 2022

2021 journal article

Phase transformations, microstructural refinement and defect evolution mechanisms in Al-Si alloys under non-hydrostatic diamond anvil cell compression

Materialia, 15, 101049.

By: T. Liu, M. Olszta, B. Gwalani, C. Park, S. Mathaudhu & A. Devaraj

Source: NC State University Libraries
Added: August 18, 2022

2021 journal article

Recovery of cold-worked Al0. 3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation

Acta Materialia, 202, 448–462.

co-author countries: India 🇮🇳 United States of America 🇺🇸
author keywords: High entropy alloys; Complex concentrated alloys; Recovery; Recrystallization; B2 precipitation
Sources: Web Of Science, ORCID
Added: August 18, 2022

2021 report

Solid Phase Gradient Alloying Method via ShAPE

By: T. Wang*, X. Li*, B. Gwalani* & M. Komarasamy*

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: July 12, 2023

2021 report

Thermal Stability and Mechanical Properties of Cold-Sprayed Ni-Yttria Coating

co-author countries: United States of America 🇺🇸
Sources: NC State University Libraries, ORCID
Added: August 18, 2022

2021 journal article

Tuning the degree of chemical ordering in the solid solution of a complex concentrated alloy and its impact on mechanical properties

Acta Materialia, 212, 116938.

co-author countries: France 🇫🇷 United States of America 🇺🇸
author keywords: High entropy alloys; Complex concentrated alloys; Ordering; Clustering; Mechanical properties
Sources: Web Of Science, ORCID
Added: August 18, 2022

2021 journal article

Understanding the microstructural stability in a γ′-strengthened Ni-Fe-Cr-Al-Ti alloy

Journal of Alloys and Compounds, 886, 161207.

By: B. Gwalani*, S. Shukla*, D. Leonard*, J. Poplawsky*, D. Pierce*, L. Kovarik*, G. Muralidharan*, A. Devaraj*

co-author countries: United States of America 🇺🇸
author keywords: gamma&PRIME precipitate; Fe-Ni-Cr-based superalloys; Atom probe tomography; CALPHAD
Sources: Web Of Science, ORCID
Added: August 18, 2022

2020 journal article

Correlating work hardening with co-activation of stacking fault strengthening and transformation in a high entropy alloy using in-situ neutron diffraction

Scientific Reports, 10(1), 22263.

By: M. Frank*, S. Nene*, Y. Chen*, B. Gwalani*, E. Kautz*, A. Devaraj*, K. An*, R. Mishra*

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID, Crossref
Added: August 29, 2022

2020 article

Deformation Twinning in a Metal-Intermetallic System: Novel Paradigm for Designing Alloys with Exceptional Strength-Ductility Combination

Gwalani, B., Dasari, S., Soni, V., Jagetia, A., Agrawal, P., shukla, S., … Banerjee, R. (2020, August 28). (Vol. 8). Vol. 8.

By: B. Gwalani*, S. Dasari, V. Soni, A. Jagetia, P. Agrawal, S. shukla, R. Mishra, R. Banerjee

Source: ORCID
Added: August 1, 2022

2020 journal article

Deformation behavior of metallic glass composites and plasticity accommodation at microstructural length-scales

Materials Today Communications, 24, 101237.

By: V. Hasannaeimi, S. Muskeri, B. Gwalani*, D. Hofmann & S. Mukherjee

author keywords: Bulk metallic glass matrix composite; Micro-pillar compression; Mechanical properties; TEM analysis
Sources: Web Of Science, ORCID
Added: August 29, 2022

2020 journal article

Dynamic Shear Deformation of a Precipitation Hardened Al0.7CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry

Entropy, 22(4), 431.

By: B. Gwalani*, T. Wang*, A. Jagetia*, S. Gangireddy*, S. Muskeri*, S. Mukherjee*, J. Lloyd*, R. Banerjee*, R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: eutectic high-entropy alloy; dynamic shear deformation; split-Hopkinson pressure bar test; hat-shaped specimen; nano-indentation
Source: ORCID
Added: August 1, 2022

2020 article

Dynamic Shear Deformation of a Precipitation Hardened Al0.7CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry

Gwalani, B., Wang, T., Jagetia, A., Gangireddy, S., Muskeri, S., Mukherjee, S., … Mishra, R. S. (2020, March 10). (Vol. 3). Vol. 3.

By: B. Gwalani*, T. Wang*, A. Jagetia*, S. Gangireddy*, S. Muskeri*, S. Mukherjee*, J. Lloyd*, R. Banerjee*, R. Mishra*

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: August 1, 2022

2020 journal article

Engineering multi-scale B2 precipitation in a heterogeneous FCC based microstructure to enhance the mechanical properties of a Al0. 5Co1. 5CrFeNi1. 5 high entropy alloy

Journal of Alloys and Compounds, 830, 154707.

co-author countries: France 🇫🇷 Taiwan, Province of China 🇹🇼 United States of America 🇺🇸
author keywords: High entropy alloys; Complex concentrated alloys; Heterogenous microstructure; Intermetallic precipitates; Mechanical properties
Sources: Web Of Science, ORCID
Added: August 29, 2022

2020 journal article

Engineering transformation pathways in an Al0. 3CoFeNi complex concentrated alloy leads to excellent strength–ductility combination

Materials Research Letters, 8(11), 399–407.

By: S. Dasari*, A. Jagetia*, V. Soni*, B. Gwalani*, S. Gorsse* & R. Banerjee*

co-author countries: France 🇫🇷 United States of America 🇺🇸
author keywords: High entropy alloys; complex concentrated alloys; multicomponent intermetallic precipitation; multi-phase microstructure; mechanical properties
Sources: Web Of Science, ORCID
Added: August 29, 2022

2020 journal article

Extreme shear-deformation-induced modification of defect structures and hierarchical microstructure in an Al–Si alloy

Communications Materials, 1(1).

By: B. Gwalani*, M. Olszta*, S. Varma*, L. Li*, A. Soulami*, E. Kautz*, S. Pathak*, A. Rohatgi* ...

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: August 1, 2022

2020 journal article

Hierarchical Eutectoid Nano-lamellar Decomposition in an Al 0.3 CoFeNi Complex Concentrated Alloy

Scientific Reports, 10, 4836.

By: S. Dasari*, B. Gwalani*, A. Jagetia*, V. Soni*, S. Gorsse* & R. Banerjee*

co-author countries: France 🇫🇷 United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 29, 2022

2020 journal article

Highly tunable magnetic and mechanical properties in an Al0.3CoFeNi complex concentrated alloy

Materialia, 12, 100755.

co-author countries: France 🇫🇷 Singapore 🇸🇬 United States of America 🇺🇸
author keywords: Complex concentrated alloys; High entropy alloys; Nano-lamellar microstructure; Eutectoid decomposition; Magnetic properties
Source: ORCID
Added: August 1, 2022

2020 journal article

Influence of non-magnetic Cu on enhancing the low temperature magnetic properties and Curie temperature of FeCoNiCrCu (x) high entropy alloys

Scripta Materialia, 182, 99–103.

co-author countries: Singapore 🇸🇬 United States of America 🇺🇸
author keywords: High entropy alloys; Magnetic materials; Curie temperature; Atom probe tomography
Sources: Web Of Science, ORCID
Added: August 29, 2022

2020 journal article

Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy

Materials Science and Engineering: A, 771, 138620.

By: B. Gwalani*, D. Choudhuri*, K. Liu*, J. Lloyd*, R. Mishra* & R. Banerjee

co-author countries: United States of America 🇺🇸
author keywords: Strengthening model; Solid solution strengthening; High entropy alloy; Clusters; Hall Petch strengthening; Orowan strengthening
Sources: Web Of Science, ORCID
Added: August 29, 2022

2020 journal article

Microstructural Assessment of a Multiple-Intermetallic-Strengthened Aluminum Alloy Produced from Gas-Atomized Powder by Hot Extrusion and Friction Extrusion

Materials, 13(23), 5333.

By: T. Wang*, B. Gwalani*, J. Silverstein*, J. Darsell*, S. Jana*, T. Roosendaal*, A. Ortiz*, W. Daye*, T. Pelletiers*, S. Whalen*

co-author countries: United States of America 🇺🇸
author keywords: powder metallurgy; high-temperature aluminum alloy; transition metals; friction extrusion; microstructural evolution; calculation of phase diagrams
Source: ORCID
Added: August 1, 2022

2020 journal article

Phase inversion in a two-phase, BCC+ B2, refractory high entropy alloy

Acta Materialia, 185, 89–97.

By: V. Soni*, B. Gwalani*, T. Alam*, S. Dasari*, Y. Zheng*, O. Senkov*, D. Miracle*, R. Banerjee*

co-author countries: United States of America 🇺🇸
author keywords: Refractory HEAs; Spinodal decomposition; Phase inversion
Sources: Web Of Science, ORCID
Added: August 29, 2022

2020 journal article

Phase stability and microstructure evolution in a ductile refractory high entropy alloy Al10Nb15Ta5Ti30Zr40

Materialia, 9, 100569.

co-author countries: France 🇫🇷 United States of America 🇺🇸
author keywords: Refractory alloy; High entropy alloy; Microstructure; Phase composition
Sources: Web Of Science, ORCID
Added: August 29, 2022

2020 journal article

Rapid assessment of structural and compositional changes during early stages of zirconium alloy oxidation

Npj Materials Degradation.

co-author countries: United States of America 🇺🇸
Source: ORCID
Added: August 1, 2022

2019 journal article

A novel nano-particle strengthened titanium alloy with exceptional specific strength

Scientific Reports, 9, 11726.

By: A. Dutt*, B. Gwalani*, V. Tungala*, M. Carl*, R. Mishra*, S. Tamirisakandala*, M. Young*, K. Cho*, R. Brennan*

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys

Materials Research Letters, 7(7), 267–274.

By: B. Gwalani*, R. Salloom*, T. Alam*, S. Valentin*, X. Zhou*, G. Thompson*, S. Srinivasan*, R. Banerjee*

co-author countries: United States of America 🇺🇸
author keywords: High entropy alloy; grain-growth; activation-energy; atom-Probe tomography
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Compositionally graded high entropy alloy with a strong front and ductile back

Materials Today Communications, 20, 100602.

By: B. Gwalani*, S. Gangireddy*, S. Shukla*, C. Yannetta*, S. Valentin*, R. Mishra*, R. Banerjee

co-author countries: United States of America 🇺🇸
author keywords: Additive manufacturing; LENS; High entropy alloy; Laminate composite; Split Hopkinsons pressure bar testing; Dynamic deformation
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Contrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC

Materials Science and Engineering: A, 739, 158–166.

By: S. Gangireddy*, B. Gwalani*, V. Soni*, R. Banerjee* & R. Mishra

co-author countries: United States of America 🇺🇸
author keywords: Strain rate sensitivity; Work hardening; Deformation twinning; Dual phase vs. single phase high entropy alloy; AlxCoCrFeNi; Precipitation effect
Sources: Crossref, ORCID
Added: August 30, 2022

2019 journal article

Deformation Induced Hierarchical Twinning Coupled with Omega Transformation in a Metastable β-Ti Alloy

Scientific Reports, 9, 1334.

By: S. Mantri*, F. Sun*, D. Choudhuri*, T. Alam*, B. Gwalani*, F. Prima*, R. Banerjee*

co-author countries: France 🇫🇷 United States of America 🇺🇸
Sources: Crossref, ORCID
Added: August 30, 2022

2019 journal article

Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy

Materials Research Letters, 7(1), 40–46.

co-author countries: United States of America 🇺🇸
author keywords: High entropy alloys or Complex concentrated alloys; Bcc-ordered B2 precipitation; Structural models; Transmission electron microscopy; Deformation twinning
Sources: Crossref, ORCID
Added: August 30, 2022

2019 journal article

Development of in situ composites via reactive friction stir processing of Ti–B4C system

Composites Part B: Engineering, 172, 54–60.

By: T. Wang*, B. Gwalani*, S. Shukla*, M. Frank* & R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: Ti-6A1-4V alloy; In situ composite; Friction stir processing; Compressive test; Nanoindentation
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Effect of nano-sized precipitates on the fatigue property of a lamellar structured high entropy alloy

Materials Science and Engineering: A, 760, 225–230.

By: K. Liu, B. Gwalani*, M. Komarasamy, S. Shukla, T. Wang & R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: Fatigue; High entropy alloy; Lamellar microstructure; Persistent slip bands
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Effect of reactive alloy elements on friction stir welded butt joints of metallurgically immiscible magnesium alloys and steel

Journal of Manufacturing Processes, 39, 138–145.

By: T. Wang, S. Shukla, B. Gwalani*, M. Komarasamy, L. Reza-Nieto & R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: Dissimilar metals; Immiscible; Butt joining; Intermetallic compound; Thermodynamic and kinetic calculation
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Elemental partitioning, mechanical and oxidation behaviour of two high-γ′ W-free γ/γ′ polycrystalline Co/Ni superalloys

Scripta Materialia, 163, 44–50.

By: I. Bantounas*, B. Gwalani*, T. Alam*, R. Banerjee* & D. Dye*

co-author countries: United Kingdom of Great Britain and Northern Ireland 🇬🇧 United States of America 🇺🇸
author keywords: Cobalt-base superalloys; Tungsten; L1(2) compound; APT; Oxidation; gamma-gamma ' microstructure; High temperature strength; Density
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds

Acta Materialia, 165, 420–430.

By: D. Choudhuri*, B. Gwalani*, S. Gorsse*, M. Komarasamy*, S. Mantri*, S. Srinivasan*, R. Mishra*, R. Banerjee

co-author countries: France 🇫🇷 United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Facile photochemical syntheses of conjoined nanotwin gold-silver particles within a biologically-benign chitosan polymer

Nanomaterials, 9(4), 596.

By: D. Korir*, B. Gwalani*, A. Joseph*, B. Kamras*, R. Arvapally*, M. Omary*, S. Marpu*

co-author countries: United States of America 🇺🇸
author keywords: isotropic; anisotropic; photochemical; bifunctional; nanomaterials; plasmonic
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Fatigue behavior of ultrafine grained triplex Al0.3CoCrFeNi high entropy alloy

Scripta Materialia, 158, 116–120.

By: K. Liu*, M. Komarasamy*, B. Gwalani*, S. Shukla* & R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: High entropy alloy; Ultrafine grained; Tensile; Fatigue; Deformation twins
Sources: Crossref, ORCID
Added: August 30, 2022

2019 journal article

High Strain Rate Response of Al0.7CoCrFeNi High Entropy Alloy: Dynamic Strength Over 2 GPa from Thermomechanical Processing and Hierarchical Microstructure

Journal of Dynamic Behavior of Materials, 5(1), 1–7.

By: S. Gangireddy*, B. Gwalani*, R. Banerjee* & R. Mishra

co-author countries: United States of America 🇺🇸
author keywords: Dynamic deformation; Al0.7CoCrFeNi; Thermomechanical processing; Ordered intermetallic; Cold work
Source: ORCID
Added: August 1, 2022

2019 journal article

Immiscible nanostructured copper-aluminum-niobium alloy with excellent precipitation strengthening upon friction stir processing and aging

Scripta Materialia, 164, 42–47.

By: S. Sinha*, M. Komarasamy*, S. Thapliyal*, B. Gwalani*, S. Shukla*, K. Darling*, R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: Friction stir processing; Copper alloys; Nanocrystalline microstructure; Precipitation; Hardness
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Influence of ordered L1 2 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy

Scientific Reports, 9, 6371.

By: B. Gwalani*, S. Gangireddy*, Y. Zheng*, V. Soni*, R. Mishra* & R. Banerjee*

co-author countries: United States of America 🇺🇸
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Laser additive manufacturing of compositionally graded AlCrFeMoVx (x= 0 to 1) high-entropy alloy system

Optics & Laser Technology, 113, 330–337.

By: B. Gwalani*, V. Soni*, O. Waseem*, S. Mantri* & R. Banerjee*

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸
author keywords: High entropy alloys (HEAs); Alloy design; High-throughput; Laser engineered net shaping; Single solid solution
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Microstructure and mechanical behavior of an additive manufactured (AM) WE43-Mg alloy

Additive Manufacturing, 26, 53–64.

By: S. Gangireddy*, B. Gwalani*, K. Liu*, E. Faierson* & R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: WE-43 Mg alloy; Powder bed fusion; Dynamic mechanical response; Porosity; Electron microscopy
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Role of copper on L12 precipitation strengthened fcc based high entropy alloy

Materialia, 6, 100282.

By: B. Gwalani*, S. Gorsse*, V. Soni*, M. Carl*, N. Ley*, J. Smith*, A. Ayyagari*, Z. Yufeng* ...

co-author countries: France 🇫🇷 United States of America 🇺🇸
author keywords: High entropy alloy; Cu clusters; Precipitation strengthening; Atom probe tomography
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Simulation of solute clusters in metallic systems

Modelling and Simulation in Materials Science and Engineering, 27(8), 085014.

By: H. Gwalani*, B. Gwalani*, M. O'Neill*, A. Mikler* & R. Banerjee*

co-author countries: United States of America 🇺🇸
author keywords: atom probe tomography; solute cluster simulation; artificial degradation; frequency distribution analysis; DBSCAN
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Strengthening of Al0. 3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3

Scripta Materialia, 162, 477–481.

By: B. Gwalani*, R. Pohan*, O. Waseem*, T. Alam*, S. Hong*, H. Ryu*, R. Banerjee*

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸
author keywords: High entropy alloy; Oxide dispersion strengthening; Spark plasma sintering; Atom probe tomography; Mechanical alloying
Sources: Web Of Science, ORCID
Added: August 29, 2022

2019 journal article

Tensile yield strength of a single bulk Al0. 3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa

Scripta Materialia, 162, 18–23.

By: B. Gwalani*, S. Gorsse*, D. Choudhuri*, Y. Zheng*, R. Mishra* & R. Banerjee

co-author countries: France 🇫🇷 United States of America 🇺🇸
author keywords: High entropy alloys; Characterization; Mechanical properties; Complex concentrated alloys; Clusters
Sources: Web Of Science, ORCID
Added: August 29, 2022

2018 conference paper

Additively Manufactured Functionally Graded FeNi based High Entropy Magnetic Alloys

2018 IEEE International Magnetics Conference (INTERMAG. Presented at the 2018 IEEE International Magnetics Conference (INTERMAG), Singapore.

By: V. Chaudhary, T. Borkar, C. Mikler, B. Gwalani, D. Choudhuri, V. Soni, T. Alam, R. Ramanujan, R. Banerjee

Event: 2018 IEEE International Magnetics Conference (INTERMAG) at Singapore on April 23-27, 2018

Source: NC State University Libraries
Added: August 30, 2022

2018 journal article

Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy

Materials Research Letters, 6(3), 171–177.

By: D. Choudhuri*, S. Shukla*, W. Green*, B. Gwalani*, V. Ageh*, R. Banerjee*, R. Mishra

co-author countries: United States of America 🇺🇸

Contributors: D. Choudhuri*, S. Shukla*, W. Green*, B. Gwalani*, V. Ageh*, R. Banerjee*, R. Mishra

Source: ORCID
Added: August 1, 2022

2018 journal article

Detailed Investigation of Core?Shell Precipitates in a Cu-Containing High Entropy Alloy

JOM, 70(9), 1771–1775.

By: T. Alam*, B. Gwalani*, G. Viswanathan*, H. Fraser* & R. Banerjee*

co-author countries: United States of America 🇺🇸

Contributors: T. Alam*, B. Gwalani*, G. Viswanathan*, H. Fraser* & R. Banerjee*

Source: ORCID
Added: August 1, 2022

2018 journal article

Grain size dependence of strain rate sensitivity in a single phase FCC high entropy alloy Al0.3CoCrFeNi

Materials Science and Engineering: A, 736, 344–348.

By: S. Gangireddy*, B. Gwalani* & R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: Strain-rate sensitivity; Grain size dependence; Dynamic mechanical behavior; FCC high entropy alloy; Al0.3CoCrFeNi
Sources: Crossref, ORCID
Added: August 30, 2022

2018 journal article

Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy

Materials Research Letters, 6(12), 676–682.

By: S. Shukla*, D. Choudhuri*, T. Wang*, K. Liu*, R. Wheeler*, S. Williams*, B. Gwalani*, R. Mishra*

co-author countries: United States of America 🇺🇸
author keywords: Hierarchical features; heterogeneous grain structure; high-entropy alloy; complex concentrated alloys; loading-unloading-reloading
Sources: Web Of Science, ORCID
Added: August 30, 2022

2018 journal article

High-entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids

Scientific Reports, 8, 14085.

By: B. Gwalani*, R. Pohan*, J. Lee*, B. Lee, R. Banerjee*, H. Ryu*, S. Hong*

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸
Sources: Crossref, ORCID
Added: August 30, 2022

2018 journal article

Influence of Cr Substitution and Temperature on Hierarchical Phase Decomposition in the AlCoFeNi High Entropy Alloy

Scientific Reports, 8, 15578.

co-author countries: Singapore 🇸🇬 United States of America 🇺🇸
Sources: Crossref, ORCID
Added: August 30, 2022

2018 journal article

Microstructural Design for Improving Ductility of An Initially Brittle Refractory High Entropy Alloy

Scientific Reports, 8(1).

By: V. Soni*, O. Senkov*, B. Gwalani*, D. Miracle* & R. Banerjee*

co-author countries: United States of America 🇺🇸

Contributors: V. Soni*, O. Senkov*, B. Gwalani*, D. Miracle* & R. Banerjee*

Source: ORCID
Added: August 1, 2022

2018 journal article

Microstructural dependence of strain rate sensitivity in thermomechanically processed Al0.1CoCrFeNi high entropy alloy

Materials Science and Engineering A, 727, 148–159.

By: S. Gangireddy*, L. Kaimiao*, B. Gwalani* & R. Mishra*

co-author countries: United States of America 🇺🇸

Contributors: S. Gangireddy*, L. Kaimiao*, B. Gwalani* & R. Mishra*

author keywords: High entropy alloy; AlxCoCrFeNi; Strain rate sensitivity; Dynamic mechanical behavior; Thermomechanical processing; Strain hardening rate (SHR)
Source: ORCID
Added: August 1, 2022

2018 journal article

Microstructure and mechanical properties of friction stir processed cast Eglin steel (ES-1)

Materials Science and Engineering A, 709, 105–114.

By: V. Tungala*, A. Arora*, B. Gwalani*, R. Mishra*, R. Brennan* & K. Cho*

co-author countries: India 🇮🇳 United States of America 🇺🇸

Contributors: V. Tungala*, A. Arora*, B. Gwalani*, R. Mishra*, R. Brennan* & K. Cho*

author keywords: Friction stir processing; Eglin steel; Mixed microstructure; Nano-twinned martensite; Nano bainite; Site-specific tensile properties
Source: ORCID
Added: August 1, 2022

2018 journal article

Microstructure and wear resistance of an intermetallic-based Al0.25Ti0.75CoCrFeNi high entropy alloy

Materials Chemistry and Physics, 210, 197–206.

co-author countries: Australia 🇦🇺 United States of America 🇺🇸

Contributors: B. Gwalani*, A. Ayyagari*, D. Choudhuri*, T. Scharf*, S. Mukherjee, M. Gibson*, R. Banerjee*

author keywords: High entropy alloy; Chi phase; Huesler phase; Wear; Intermetallic
Source: ORCID
Added: August 1, 2022

2018 journal article

Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy

Materials Chemistry and Physics, 210, 62–70.

By: R. Pohan*, B. Gwalani*, J. Lee*, T. Alam*, J. Hwang*, H. Ryu*, R. Banerjee*, S. Hong*

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸

Contributors: R. Pohan*, B. Gwalani*, J. Lee*, T. Alam*, J. Hwang*, H. Ryu*, R. Banerjee*, S. Hong*

author keywords: High entropy alloy; Powder metallurgy; Sintering; Mechanical characterization
Source: ORCID
Added: August 1, 2022

2018 journal article

Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al0.3CoCrFeNi high entropy alloy

Materials Science and Engineering A, 734, 42–50.

By: S. Gangireddy*, B. Gwalani*, K. Liu*, R. Banerjee* & R. Mishra

co-author countries: United States of America 🇺🇸

Contributors: S. Gangireddy*, B. Gwalani*, K. Liu*, R. Banerjee* & R. Mishra

author keywords: Dynamic mechanical behavior; Work hardening; Strain rate sensitivity; FCC-based high entropy alloy; Al0.3CoCrFeNi
Source: ORCID
Added: August 1, 2022

2018 journal article

Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing

Acta Materialia, 153, 169–185.

By: B. Gwalani*, S. Gorsse*, D. Choudhuri*, M. Styles*, Y. Zheng*, R. Mishra*, R. Banerjee

co-author countries: Australia 🇦🇺 France 🇫🇷 United States of America 🇺🇸

Contributors: B. Gwalani*, S. Gorsse*, D. Choudhuri*, M. Styles*, Y. Zheng*, R. Mishra*, R. Banerjee

author keywords: High entropy alloys; Phase transformations; Calphad; Atom probe tomography; Synchrotron XRD
Source: ORCID
Added: August 1, 2022

2018 journal article

Phase stability as a function of temperature in a refractory high-entropy alloy

Journal of Materials Research, 1–12.

By: V. Soni*, B. Gwalani*, O. Senkov*, B. Viswanathan*, T. Alam*, D. Miracle*, R. Banerjee*

co-author countries: United States of America 🇺🇸

Contributors: V. Soni*, B. Gwalani*, O. Senkov*, B. Viswanathan*, T. Alam*, D. Miracle*, R. Banerjee*

Source: ORCID
Added: August 1, 2022

2018 journal article

Reciprocating sliding wear behavior of high entropy alloys in dry and marine environments

Materials Chemistry and Physics, 210, 162–169.

By: A. Ayyagari*, C. Barthelemy*, B. Gwalani*, R. Banerjee*, T. Scharf* & S. Mukherjee

co-author countries: France 🇫🇷 United States of America 🇺🇸

Contributors: A. Ayyagari*, C. Barthelemy*, B. Gwalani*, R. Banerjee*, T. Scharf* & S. Mukherjee

author keywords: High entropy alloys; Tribocorrosion; Marine wear; Negative synergy
Source: ORCID
Added: August 1, 2022

2018 journal article

Surface degradation mechanisms in precipitation-hardened high-entropy alloys

Npj Materials Degradation, 2, 33.

By: A. Ayyagari*, B. Gwalani*, S. Muskeri*, S. Mukherjee & R. Banerjee*

co-author countries: United States of America 🇺🇸
Sources: Crossref, ORCID
Added: August 30, 2022

2018 journal article

The effect of cold rolling on grain boundary structure and stress corrosion cracking susceptibility of twins in alloy 690 in simulated PWR primary water environment

Corrosion Science, 130, 126–137.

co-author countries: United States of America 🇺🇸

Contributors: W. Kuang*, G. Was*, C. Miller*, M. Kaufman*, T. Alam*, B. Gwalani*, R. Banerjee*

author keywords: Alloy; SEM; TEM; Stress corrosion; Intergranular corrosion
Source: ORCID
Added: August 1, 2022

2017 journal article

A Combinatorial Approach for Assessing the Magnetic Properties of High Entropy Alloys: Role of Cr in AlCoxCr1?xFeNi

Advanced Engineering Materials, 19(8).

By: T. Borkar*, V. Chaudhary*, B. Gwalani*, D. Choudhuri*, C. Mikler*, V. Soni*, T. Alam*, R. V. Ramanujan*, R. Banerjee*

co-author countries: Singapore 🇸🇬 United States of America 🇺🇸

Contributors: T. Borkar*, V. Chaudhary*, B. Gwalani*, D. Choudhuri*, C. Mikler*, V. Soni*, T. Alam*, R. V. Ramanujan*, R. Banerjee*

Source: ORCID
Added: August 1, 2022

2017 journal article

Change in the primary solidification phase from fcc to bcc-based B2 in high entropy or complex concentrated alloys

Scripta Materialia, 127, 186–190.

co-author countries: Australia 🇦🇺 France 🇫🇷 Singapore 🇸🇬 United States of America 🇺🇸

Contributors: D. Choudhuri*, B. Gwalani*, S. Gorsse*, C. Mikler*, R. Ramanujan*, M. Gibson*, R. Banerjee*

author keywords: High entropy alloys; Complex concentrated alloys; Microscopy; Thermodynamic modeling; Lens
Source: ORCID
Added: August 1, 2022

2017 journal article

Cu assisted stabilization and nucleation of L12precipitates in Al0.3CuFeCrNi2fcc-based high entropy alloy

Acta Materialia, 129, 170–182.

co-author countries: Australia 🇦🇺 Korea (Republic of) 🇰🇷 United States of America 🇺🇸
author keywords: High entropy alloys; Synchrotron X-Ray diffraction; Atom probe tomography; L1(2)
Source: ORCID
Added: August 1, 2022

2017 journal article

High performance rechargeable Li-S batteries using binder-free large sulfur-loaded three-dimensional carbon nanotubes

Carbon, 118, 120–126.

By: M. Patel*, E. Cha*, C. Kang*, B. Gwalani* & W. Choi*

co-author countries: United States of America 🇺🇸

Contributors: M. Patel*, E. Cha*, C. Kang*, B. Gwalani* & W. Choi*

Source: ORCID
Added: August 1, 2022

2017 journal article

Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy

Materials and Design, 121, 254–260.

By: B. Gwalani*, V. Soni*, M. Lee*, S. Mantri*, Y. Ren* & R. Banerjee*

co-author countries: United States of America 🇺🇸

Contributors: B. Gwalani*, V. Soni*, M. Lee*, S. Mantri*, Y. Ren* & R. Banerjee*

author keywords: High-entropy alloy; Grain growth; Hall-Petch effect; Precipitation strengthening; L1(2), B2
Source: ORCID
Added: August 1, 2022

2017 journal article

The evolution of microstructure and microhardness in a biomedical Ti?35Nb?7Zr?5Ta alloy

Journal of Materials Science, 52(6), 3062–3073.

By: M. Hendrickson*, S. Mantri*, Y. Ren*, T. Alam*, V. Soni*, B. Gwalani*, M. Styles*, D. Choudhuri*, R. Banerjee*

co-author countries: Australia 🇦🇺 United States of America 🇺🇸

Contributors: M. Hendrickson*, S. Mantri*, Y. Ren*, T. Alam*, V. Soni*, B. Gwalani*, M. Styles*, D. Choudhuri*, R. Banerjee*

Source: ORCID
Added: August 1, 2022

2017 journal article

Tuning the phase stability and magnetic properties of laser additively processed Fe-30at%Ni soft magnetic alloys

Materials Letters, 199, 88–92.

By: C. Mikler*, V. Chaudhary*, V. Soni*, B. Gwalani*, R. Ramanujan* & R. Banerjee*

co-author countries: Singapore 🇸🇬 United States of America 🇺🇸

Contributors: C. Mikler*, V. Chaudhary*, V. Soni*, B. Gwalani*, R. Ramanujan* & R. Banerjee*

author keywords: Laser processing; Additive manufacturing; Magnetic materials; Phase transformation; Iron-nickel alloys
Source: ORCID
Added: August 1, 2022

2016 journal article

A combinatorial assessment of AlxCrCuFeNi2(0 < x < 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties

Acta Materialia, 116, 63–76.

By: T. Borkar*, B. Gwalani*, D. Choudhuri*, C. Mikler*, C. Yannetta*, X. Chen*, R. Ramanujan*, M. Styles*, M. Gibson*, R. Banerjee*

co-author countries: Australia 🇦🇺 Singapore 🇸🇬 United States of America 🇺🇸

Contributors: T. Borkar*, B. Gwalani*, D. Choudhuri*, C. Mikler*, C. Yannetta*, X. Chen*, R. Ramanujan*, M. Styles*, M. Gibson*, R. Banerjee*

author keywords: High entropy alloys (HEAs); Alloy design; High-throughput; Laser engineered net shaping; Functional properties
Source: ORCID
Added: August 1, 2022

2016 journal article

Experimental investigation of the ordering pathway in a Ni-33 at.%Cr alloy

Acta Materialia, 115, 372–384.

By: B. Gwalani*, T. Alam*, C. Miller*, T. Rojhirunsakool*, Y. Kim*, S. Kim*, M. Kaufman*, Y. Ren*, R. Banerjee*

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸

Contributors: B. Gwalani*, T. Alam*, C. Miller*, T. Rojhirunsakool*, Y. Kim*, S. Kim*, M. Kaufman*, Y. Ren*, R. Banerjee*

author keywords: Ni-based superalloy; Atomic ordering; Synchrotron XRD; Orientation specific APT
Source: ORCID
Added: August 1, 2022

2016 journal article

Hierarchical multi-scale microstructural evolution in an as-cast Al2CuCrFeNi2complex concentrated alloy

Intermetallics, 71, 31–42.

By: T. Borkar*, B. Gwalani*, D. Choudhuri*, T. Alam*, A. Mantri*, M. Gibson*, R. Banerjee*

co-author countries: Australia 🇦🇺 United States of America 🇺🇸

Contributors: T. Borkar*, B. Gwalani*, D. Choudhuri*, T. Alam*, A. Mantri*, M. Gibson*, R. Banerjee*

author keywords: High entropy alloys; TEM; Atom probe; Solidification
Source: ORCID
Added: August 1, 2022

2016 journal article

On the role of Ag in enhanced age hardening kinetics of Mg?Gd?Ag?Zr alloys

Philosophical Magazine Letters, 96(6), 212–219.

co-author countries: Australia 🇦🇺 China 🇨🇳 United States of America 🇺🇸

Contributors: Y. Zhang*, T. Alam*, B. Gwalani*, W. Rong*, R. Banerjee*, L. Peng*, J. Nie*, N. Birbilis*

author keywords: Atom probe; magnesium alloys; precipitation; clusters; HAADF-STEM
Source: ORCID
Added: August 1, 2022

2016 journal article

Pine Wood Extracted Activated Carbon through Self-Activation Process for High-Performance Lithium-Ion Battery

ChemistrySelect, 1(13), 4000–4007.

By: C. Xia*, C. Kang*, M. Patel*, L. Cai*, B. Gwalani*, R. Banerjee*, S. Shi, W. Choi*

co-author countries: United States of America 🇺🇸

Contributors: C. Xia*, C. Kang*, M. Patel*, L. Cai*, B. Gwalani*, R. Banerjee*, S. Shi, W. Choi*

author keywords: Biomass; Carbon; Electrochemistry; Environmental chemistry; Sustainable Chemistry
Source: ORCID
Added: August 1, 2022

2016 journal article

Stability of ordered L12and B2precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2

Scripta Materialia, 123, 130–134.

co-author countries: Korea (Republic of) 🇰🇷 United States of America 🇺🇸
author keywords: High entropy alloys; Solute partitioning; Atom probe tomography; L1(2)
Source: ORCID
Added: August 1, 2022

2015 conference paper

Effects of cold work and aging treatments on the microstructure and stress corrosion cracking initiation behavior of solution annealed alloy 690

Proceedings of the 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors.

By: W. Kuang, C. Miller, M. Kaufman, T. Alam, B. Gwalani, R. Banerjee, G. Was

Source: NC State University Libraries
Added: August 18, 2022

2015 journal article

Formation of a Huesler-like L21phase in a CoCrCuFeNiAlTi high-entropy alloy

Scripta Materialia, 100, 36–39.

By: D. Choudhuri*, T. Alam*, T. Borkar*, B. Gwalani*, A. Mantri*, S. Srinivasan*, M. Gibson*, R. Banerjee*

co-author countries: Australia 🇦🇺 United States of America 🇺🇸

Contributors: D. Choudhuri*, T. Alam*, T. Borkar*, B. Gwalani*, A. Mantri*, S. Srinivasan*, M. Gibson*, R. Banerjee*

author keywords: High Entropy Alloys; Phase transformations; First principles calculations; Characterization
Source: ORCID
Added: August 1, 2022

Employment

Updated: October 16th, 2022 23:29

2022 - present

North Carolina State University Raleigh, North Carolina, US
Assistant Professor Materials Science and Engineering

2019 - 2022

Pacific Northwest National Laboratory Richland, WA, US
Post Doctoral Researcher Physical and Computational Science Division

2017 - 2019

University of North Texas Denton, TX, US
Post Doctoral Research Materials Science and Engineering

Education

Updated: August 3rd, 2018 13:36

2013 - 2017

University of North Texas Denton, TX, US
PhD Materials Science and Engineering

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.