Kerry S. Havner

Analytical solutions for material line and plane in triple slip, with inverse solutions for the slips from a finite deformation experiment on iron crystals

INTERNATIONAL JOURNAL OF PLASTICITY, 125, 280–293.

Finite deformation analysis of slip-induced crystalline rotations during tensile and compressive tests on bcc iron crystals

PHILOSOPHICAL MAGAZINE, 98(31), 2797–2825.

On crystal shear, lattice rotation and constraint stress in (110) channel die compression: rate-independent and viscoplastic analyses and predictions compared

PHILOSOPHICAL MAGAZINE, 94(17), 1924–1955.

Comparative evaluation of a viscoplastic power-law and rate-independent crystal plasticity in channel die compression

MECHANICS OF MATERIALS, 59, 126–141.

The elastoplastic transition in channel die compression of fcc crystals

INTERNATIONAL JOURNAL OF PLASTICITY, 35, 31–43.

Perspectives on (110) channel die compression and analysis of the Goss orientation

INTERNATIONAL JOURNAL OF PLASTICITY, 27(10), 1512–1526.

Analysis of fcc crystals in two singular orientations in (110) channel die compression

MECHANICS OF MATERIALS, 42(6), 657–672.

Finite plastic deformation of crystalline solids (paperback re-issue)

Cambridge: Cambridge University Press.

Further investigation of crystal hardening inequalities in (110) channel die compression

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 464(2096), 1955–1982.

Investigation of basic crystal hardening inequalities in a range of stable lattice orientations in (110) channel die compression

INTERNATIONAL JOURNAL OF PLASTICITY, 24(1), 74–88.

"Channel die compression revisited: Application of a set of basic crystal hardening inequalities to (110) loading" (vol 39, pg 610, 2007)

Havner, K. S. (2007, September). MECHANICS OF MATERIALS, Vol. 39, pp. 893–895.

Channel die compression revisited: Application of a set of basic crystal hardening inequalities to (110) loading

MECHANICS OF MATERIALS, 39(6), 610–622.

Kinematic, stress, and hardening analysis in finite double slip

INTERNATIONAL JOURNAL OF PLASTICITY, 21(1), 83–99.

On lattice and material-frame rotations and crystal hardening in high-symmetry axial loading

PHILOSOPHICAL MAGAZINE, 85(25), 2861–2894.

On the onset of necking in the tensile test

INTERNATIONAL JOURNAL OF PLASTICITY, 20(4-5), 965–978.

Numerical studies of nonuniform deformation, stress state evolution, and subgrain formation in bicrystals in (110) channel die compression

Yu, P. G., & Havner, K. S. (2001, January). JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, Vol. 49, pp. 173–208.

On the stress state at the yield point in symmetric bicrystals in (110) channel die compression

MECHANICS OF MATERIALS, 27(4), 211–227.

On velocity discontinuities in elastoplastic bicrystals in channel die compression

INTERNATIONAL JOURNAL OF PLASTICITY, 14(1-3), 61–74.

Analytical and numerical investigation of non-uniform straining and subgrain initiation in bicrystals in channel die compression

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 355(1730), 1905–1943.

A comparative study of hardening theories in torsion using the Taylor polycrystal model

INTERNATIONAL JOURNAL OF PLASTICITY, 12(5), 695–718.

An analytical investigation of inhomogeneous straining, subgrain formation, and the initiation of microshear bands in bicrystals

In D. F. Parker & A. H. England (Eds.), IUTAM Symposium on Anisotropy, Inhomogeneity and Nonlinearity in Solid Mechanics: Proceedings of the IUTAM-ISIMM symposium held in Nottingham, U.K., 30 August-3 September 1994 (pp. 211–216). Dordrecht; Boston: Kluwer Academic.

Exact stress states and velocity fields in bicrystals at the yield point in channel die compression

Zeitschrift Fur Angewandte Mathematik Und Physik, 46, 446–465.

A statical interpretation of the stress work-conjugate to Lagrangian-based Almansi strain

In L. C. B. G. Z. Voyiadjis & L. J. Jacobs (Eds.), Mechanics of materials and structures (Studies in applied mechanics, 35) (pp. 241–252).

ON SYMMETRICAL BICRYSTALS AT THE YIELD-POINT IN (110) CHANNEL DIE COMPRESSION

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 42(2), 361–379.

ON THE EVOLUTION OF TEXTURE AND YIELD LOCI IN AXISYMMETRICAL DEFORMATION OF FCC POLYCRYSTALS

INTERNATIONAL JOURNAL OF PLASTICITY, 10(5), 471–498.

TAYLOR,G.I., REVISITED - THE CONE OF UNEXTENDED DIRECTIONS IN DOUBLE SLIP

INTERNATIONAL JOURNAL OF PLASTICITY, 9(2), 159–179.

Comparative evaluation of plasticity theories against tension- torsion test at finite strain

Journal of Engineering Mechanics, 118, 2104–2126.

Finite plastic deformation of crystalline solids

Cambridge: Cambridge University Press.

INVESTIGATION OF A ONE-PARAMETER FAMILY OF HARDENING RULES IN SINGLE SLIP IN FCC CRYSTALS

INTERNATIONAL JOURNAL OF PLASTICITY, 7(6), 477–503.

Principal direction paths in tension-torsion test at finite strain

Journal of Engineering Mechanics, 116, 1002–1019.

A THEORY OF MINIMUM PLASTIC SPIN IN CRYSTAL MECHANICS

PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 422(1862), 193–239.

FINITE DEFORMATION ANALYSIS OF FCC CRYSTALS IN (110)(112)(111) CHANNEL DIE COMPRESSION

INTERNATIONAL JOURNAL OF PLASTICITY, 4(1), 1–27.

ON FINITE DEFORMATION OF FCC CRYSTALS IN (110) CHANNEL DIE COMPRESSION

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 36(3), 285–315.

ANALYSIS OF A FAMILY OF UNSTABLE LATTICE ORIENTATIONS IN (110) CHANNEL DIE COMPRESSION

ACTA MECHANICA, 69(1-4), 243–269.

On the continuum mechanics of crystal slip

Continuum models of discrete systems: Proceedings of the Fifth International Symposium on Continuum Models of Discrete Systems, Nottingham, 14-20 July, 1985, 47–59. Rotterdam; Boston: A.A. Balkema.

Fundamental considerations in micromechanical modeling of polycrystalline metals at finite strain

In J. Z. J. Gittus & S. Nemat-Nasser (Eds.), Large deformations of solids: Physical basis and mathematical modelling (pp. 243–265).

ON UNIQUENESS OF MULTIPLE-SLIP SOLUTIONS IN CONSTRAINED AND UNCONSTRAINED FCC CRYSTAL DEFORMATION PROBLEMS

INTERNATIONAL JOURNAL OF PLASTICITY, 2(4), 329–345.

ANALYSIS OF TENSILE LOADED FCC CRYSTALS IN 4-FOLD AND 8-FOLD SYMMETRY

MECHANICS OF MATERIALS, 4(1), 33–50.

Comparisons of crystal hardening laws in multiple slip

International Journal of Plasticity, 1, 111–124.

THEORETICAL-ANALYSIS OF THE CHANNEL DIE COMPRESSION TEST .2. 1ST-ORDER AND 2ND-ORDER ANALYSIS OF ORIENTATION [110][001][110] IN FCC CRYSTALS

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 33(3), 285–313.

1ST-ORDER AND 2ND-ORDER ANALYSIS OF AXIALLY LOADED CRYSTALS IN N-FOLD SYMMETRY

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 311(1518), 469–493.

THEORETICAL-ANALYSIS OF THE CHANNEL DIE COMPRESSION TEST .1. GENERAL-CONSIDERATIONS AND FINITE DEFORMATION OF FCC CRYSTALS IN STABLE LATTICE ORIENTATIONS

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 32(6), 417–442.

THEORETICAL LATENT HARDENING OF CRYSTALS IN DOUBLE-SLIP .2. FCC CRYSTALS SLIPPING ON DISTINCT PLANES

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 31(3), 231–250.

A theory of finite plastic deformation of crystalline solids

In H. G. Hopkins & M. J. Sewell (Eds.), Mechanics of solids: The Rodney Hill 60th anniversary volume (pp. 265–302).

Aspects of the simple theory of rotation-dependent crystal anisotropy

In E. H. Lee & R. L. Mallett (Eds.), Plasticity of metals at finite strain: Theory, experiment, and computation: Proceedings of research workshop held at Stanford University, July 29, 30, July 1, 1981 (pp. 318–340). Stanford, Cal.: Division of Applied Mechanics, Stanford University.

MINIMUM PLASTIC WORK SELECTS THE HIGHEST SYMMETRY DEFORMATION IN AXIALLY-LOADED FCC CRYSTALS

MECHANICS OF MATERIALS, 1, 97–111.

PERSPECTIVES IN THE MECHANICS OF ELASTOPLASTIC CRYSTALS

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 30(1-2), 5–22.

THEORETICAL LATENT HARDENING OF CRYSTALS IN DOUBLE SLIP .1. FCC CRYSTALS WITH A COMMON SLIP PLANE

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 30(6), 379–398.

A THEORETICAL-ANALYSIS OF FINITELY DEFORMING FCC CRYSTALS IN THE SIXFOLD SYMMETRY POSITION

PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 378(1774), 329–349.

THE KINEMATICS OF DOUBLE SLIP WITH APPLICATION TO CUBIC-CRYSTALS IN THE COMPRESSION TEST

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 27(5-6), 415–429.

THEORETICAL LATENT HARDENING IN CRYSTALS .1. GENERAL EQUATIONS FOR TENSION AND COMPRESSION WITH APPLICATION TO FCC CRYSTALS IN TENSION

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 27(1), 33–50.

THEORETICAL LATENT HARDENING IN CRYSTALS .3. FCC CRYSTALS IN COMPRESSION

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 27(5-6), 393–414.

Theoretical latent hardening in crystals: II. B.c.c. crystals in tension and compression

Journal of the Mechanics and Physics of Solids, 27, 285–314.

FURTHER INVESTIGATION OF A NEW HARDENING LAW IN CRYSTAL PLASTICITY

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 45(3), 500–506.

GENERAL KINEMATICAL ANALYSIS OF DOUBLE SLIP

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 26(2), 79–92.

UNIFYING CONCEPTS IN PLASTICITY THEORY AND RELATED MATTERS IN NUMERICAL-ANALYSIS

NUCLEAR ENGINEERING AND DESIGN, 46(1), 187–201.

APPLICATION OF A DISCRETE POLYCRYSTAL MODEL TO ANALYSIS OF CYCLIC STRAINING IN COPPER

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 13(5), 395–407.

SIMPLE MATHEMATICAL-THEORY OF FINITE DISTORTIONAL LATENT HARDENING IN SINGLE-CRYSTALS

PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 358(1692), 47–70.

UNIFICATION, UNIQUENESS AND NUMERICAL-ANALYSIS IN PLASTICITY

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 13(7), 625–635.

UNIQUENESS CRITERIA AND MINIMUM PRINCIPLES FOR CRYSTALLINE SOLIDS AT FINITE STRAIN

ACTA MECHANICA, 28(1-4), 139–151.

CONVERGENCE OF FINITE-ELEMENT METHOD FOR A CLASS OF ELASTIC-PLASTIC SOLIDS

QUARTERLY OF APPLIED MATHEMATICS, 34(1), 59–68.

Some concepts and results from the mechanics of crystalline solids having possible application to theories of thermoviscoplasticity

Workshop on Applied Thermoviscoplasticity held October 13 and 14, 1975 at the Technological Institute, Northwestern University, Evanston, Illinois, 19–35. Evanston, IL: Technological Institute, Northwestern University.

ASPECTS OF THEORETICAL PLASTICITY AT FINITE DEFORMATION AND LARGE PRESSURE

ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK, 25(6), 765–781.

On bending of a crystal to a cylindrical surface

Journal of Applied Mechanics: Transactions of the ASME, 41, 1984–1988.

Plastic deformation and latent strain energy in a polycrystalline aluminum model

International Journal of Solids and Structures, 10, 853–862.

A quantitative study of a crystalline aggregate model

International Journal of Solids and Structures, 9, 379–394.

An analytical model of large deformation effects in crystalline aggregates

In Foundations of plasticity (pp. 93–106). Leyden: Noordhof International.

MECHANICS OF CRYSTALLINE SOLIDS

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 21(6), 383–394.

HILLS STRESS RATE IN CONTINUUM MECHANICS OF POLYCRYSTALS

ACTA MECHANICA, 14(2-3), 183-&.

A discrete model for the prediction of subsequent yield surfaces in polycrystalline plasticity

International Journal of Solids and Structures, 7, 719–730.

On convergence of a discrete aggregate model in polycrystalline plasticity

International Journal of Solids and Structures, 7, 1269–1275.

A discretized variational formulation of anisotropic small strain plasticity problems

Nuclear Engineering and Design, 11, 308–322.

A path criterion for deformation plasticity theory

Journal of the Engineering Mechanics Division, 95, 747–761.

Mathematical theories of material behavior

In Metal fatigue: Theory and design (pp. 14–65). New York: Wiley.

The theoretical behavior of a polycrystalline solid as related to certain general concepts of continuum plasticity

International Journal of Solids and Structures, 5, 215–226.

On convergence of iterative methods in plastic strain analysis

International Journal of Solids and Structures, 4, 491–508.

ON ENERGY-DERIVED DIFFERENCE EQUATIONS IN THERMAL STRESS PROBLEMS

JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS, 284(2), 127-&.

ON FORMULATION AND ITERATIVE SOLUTION OF SMALL STRAIN PLASTICITY PROBLEMS

QUARTERLY OF APPLIED MATHEMATICS, 23(4), 323-&.

On energy balance criteria in ductile fracture

International Journal of Fracture Mechanics, 2, 506–525.

FINITE-DIFFERENCE SOLUTION OF 2 VARIABLE THERMAL AND MECHANICAL DEFORMATION PROBLEMS

JOURNAL OF SPACECRAFT AND ROCKETS, 2(4), 542-&.

Influence coefficients for circular plates

In Research Publication (Oklahoma State University. School of Civil Engineering) (Vol. 15). Stillwater, OK: Oklahoma State University, School of Civil Engineering.

Analysis of flat plates by the algebraic carry-over method, Vol. II - Tables

In Publication (Oklahoma State University. Engineering Experiment Station) (Vol. 119).

Analysis of flat plates by the algebraic carry-over method, Vol. I - Theory

In Publication (Oklahoma State University. Engineering Experiment Station) (Vol. 118).

Analysis of continuous beams on elastic supports by carry-over moments

In Research Publication (Oklahoma State University. School of Civil Engineering) (Vol. 7). Stillwater, OK: Oklahoma State University, School of Civil Engineering.

Influence lines for continuous beams

In Publication (Oklahoma State University. Engineering Experiment Station) (Vol. 106). Stillwater, OK: Oklahoma State University, Engineering Experiment Station.

Analysis of frames with curved and bent members

Proceedings of the American Society of Civil Engineers, Structural Division, 84(ST 5).