Abhinav Gupta

A Closed-Form Solution to Characterize the Behavior of Piping T-Joints

Dubey, A. R., Gupta, A., & Cho, S. G. (2021, July 10). INTERNATIONAL JOURNAL OF STEEL STRUCTURES.

Seismic response of electrical equipment subjected to high?frequency ground motions

NUCLEAR ENGINEERING AND DESIGN, 374.

Significance of multi-hazard risk in design of buildings under earthquake and wind loads

ENGINEERING STRUCTURES.

A Bayesian Inference driven computational framework for seismic risk assessment using large-scale nonlinear finite element analyses

PROGRESS IN NUCLEAR ENERGY, 130.

A Framework for Simulation-Based Internal Flooding Risk Assessment

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 142(1).

Characterization of Limit State for Seismic Fragility Assessment of T-Joints in Piping System

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 142(5).

Limitations of traditional tools for beyond design basis external hazard PRA

NUCLEAR ENGINEERING AND DESIGN, 370.

Risk informed validation framework for external flooding scenario

NUCLEAR ENGINEERING AND DESIGN, 356.

Current state of in-cabinet response spectra for seismic qualification of equipment in nuclear power plants

NUCLEAR ENGINEERING AND DESIGN, 343, 269–275.

Fragility Evaluation in Building-Piping Systems: Effect of Piping Interaction With Buildings

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 141(1).

Probabilistic Characterization of an Allowable Design Moment in a Piping Elbow

JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 141(3).

Computationally efficient fragility assessment using equivalent elastic limit state and Bayesian updating

Computers and Structures, 197, 1–11.

Probabilistic risk assessment based model validation method using Bayesian network

Reliability Engineering & System Safety, 169, 380–393.

Seismic Fragility of Steel Piping System Based on Pipe Size, Coupling Type, and Wall Thickness

INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 18(4), 1200–1209.

Simulation of constrained variables in engineering risk analyses

American Statistician, 72(2), 130–139.

Performance-based reliability of ASME piping design equations

Journal of Pressure Vessel Technology, 139(3).

Piping fragility evaluation: Interaction with high-rise building performance

Journal of Pressure Vessel Technology, 139(3).

Probabilistic risk assessment framework for structural systems under multiple hazards using Bayesian statistics

Nuclear Engineering and Design, 315, 20–34.

Significance of non-classical damping in seismic qualification of equipment and piping

Nuclear Engineering and Design, 317, 90–99.

Structural fragility of T-joint connections in large-scale piping systems using equivalent elastic time-history simulations

Structural Safety, 65, 49–59.

A reconciliation of experimental and analytical results for piping systems

International Journal of Steel Structures, 16(4), 1043–1055.

Bayesian network technique in probabilistic risk assessment for multiple hazards

Proceedings of the 24th International Conference on Nuclear Engineering, 2016, vol 4.

Fragility of a flood defense structure subjected to multi-hazard scenario

Proceedings of the 24th International Conference on Nuclear Engineering, 2016, vol 4.

Seismic qualification of equipment: A pra-consistent framework

Proceedings of the 24th International Conference on Nuclear Engineering, 2016, vol 1.

Seismic fragility of RC shear walls in nuclear power plant Part 1: Characterization of uncertainty in concrete constitutive model

Nuclear Engineering and Design, 295, 576–586.

Seismic fragility of RC shear walls in nuclear power plant part 2: Influence of uncertainty in material parameters on fragility of concrete shear walls

Nuclear Engineering and Design, 295, 587–596.

Seismic fragility of threaded Tee-joint connections in piping systems

International Journal of Pressure Vessels and Piping, 132, 106–118.

Evolution of Organic Matter and Organic Nitrogen in Leachates with Landfilling Age: A Size Distribution and Hydrophobicity Study

World Environmental and Water Resources Congress 2013. Presented at the World Environmental and Water Resources Congress 2013.

Fragility analysis of threaded T-joint connections in hospital piping systems

Proceedings of the ASME Pressure Vessels and Piping Conference, PVP 2011, vol 8, 147–155.

Sampling of closely-spaced ordered set of uniformly distributed random variables

International Journal for Numerical Methods in Engineering, 89(3), 354–370.

A enetic algorithm for design of moment-resisting steel frames

Structural and Multidisciplinary Optimization, 44(4), 559–574.

Consideration of uncertainties in seismic analysis of non-classically damped coupled systems

Nuclear Engineering and Design, 241(6), 2034–2044.

Near bulk semiconductor to metal transition in epitaxial VO2 thin films

Applied Physics Letters, 97(15).

Semiconductor-metal transition characteristics of VO2 thin films grown on c- and r-sapphire substrates

Journal of Applied Physics, 107(5).

Magnetic properties of self-assembled Ni nanoparticles in two dimensional structures

Journal of Nanoscience and Nanotechnology, 9(6), 3993–3996.

Semiconductor to metal transition characteristics of VO2 thin films grown epitaxially on Si (001)

Applied Physics Letters, 95(11).

Computational framework for remotely operable laboratories

Engineering With Computers, 24(4), 405–415.

Computational modelling of genome-side transcription assembly networks using a fluidics analogy

PLoS One, 3(8).

A novel optimization approach for minimum cost design of trusses

Computers and Structures, 85(23-24), 1782–1794.

Combination of modal responses: A closed-form formulation for rigid response coefficient

Nuclear Engineering and Design, 237(19), 2075–2082.

Internet-enabled remote observation and control of a shake table experiment

Journal of Computing in Civil Engineering, 20(4), 271–280.

MGA - A mathematical approach to generate design alternatives

In Intelligent computing in engineering and architecture ?h [electronic resource] : ?b 13th EG-ICE Workshop 2006, Ascona, Switzerland, June 25-30, 2006 : revised selected papers / ?c Ian F. C. Smith (ed.). (Vol. 4200, pp. 408–415).

Consideration of uncertainties in seismic analysis of coupled building piping systems

Nuclear Engineering and Design, 235(17-19), 2071–2086.

Genetic algorithm-based decision support for optimizing seismic response of piping systems

Journal of Structural Engineering (New York, N.Y.), 131(3), 389–398.

Alternatives in the implementation of internet-enabled laboratory experiments in undergraduate civil engineering courses

ASEE 2004 annual conference & exposition$h[electronic resource] :June 20-23, 2004, Salt Lake City, Utah : Engineering education reaches new heights : conference proceedings. Washington, D.C.: American Soceity for Engineering Education.

Modeling the dynamic behavior of electrical cabinets and control panels: Experimental and analytical results

Journal of Structural Engineering (New York, N.Y.), 130(3), 511–519.

Reliability-based load and resistance factor design for piping: an exploratory case study

Nuclear Engineering and Design, 224(2), 161–178.

Rocking stiffness of mounting arrangements in electrical cabinets and control panels

Nuclear Engineering and Design, 219(2), 127–141.

TaN-TiN binary alloys and superlattices as diffusion barriers for copper interconnects

Journal of Electronic Materials, 32(10), 994–999.

Effect of hydrogen on adsorbed precursor diffusion kinetics during hydrogenated amorphous silicon deposition

Applied Physics Letters, 80(13), 2356–2358.

Modified Ritz vector approach for dynamic properties of electrical cabinets and control panels

Nuclear Engineering and Design, 217(1-2), 49–62.

Redundancy in residual vectors for missing mass effect in coupled modal synthesis

Journal of Structural Engineering (New York, N.Y.), 128(9), 1231–1235.

Ritz vector approach for static and dynamic analysis of plates with edge beams

Journal of Sound and Vibration, 253(2), 373–388.

Bond strain, chemical induction, and OH incorporation in low- temperature (350-100 degrees C) plasma deposited silicon dioxide films

Journal of Vacuum Science & Technology. B, Microelectronics and Nanometer Structures, 18(3), 1764–1769.

Ritz vector approach for evaluating incabinet response spectra

Nuclear Engineering and Design, 190(3), 255–272.

Missing mass effect in coupled analysis. I: Complex modal properties

Journal of Structural Engineering (New York, N.Y.), 124(5), 490–495.

Missing mass effect in coupled analysis. II: Residual response

Journal of Structural Engineering (New York, N.Y.), 124(5), 496–500.

CREST-IRS: A computer program for generating instructure response spectra (Version 1.0)

Center for Nuclear Power Plant Structures, Equipment and Piping in the Department of Civil Engineering.

Seismic response of tuned single degree of freedom secondary systems

Nuclear Engineering and Design, 172(1-2), 17–25.