Works (91)

Updated: July 15th, 2024 04:31

2024 journal article

A Study on Welding of Porous Metals and Metallic Foams

Advanced Engineering Materials.

By: A. Rabiei n, J. Cance n & Z. Chacko n

Source: ORCID
Added: March 1, 2024

2024 journal article

Thermal Emissivity and Heat Capacity of Composite Metal Foam

JOURNAL OF COMPOSITES SCIENCE, 8(6).

By: N. Amoafo-Yeboah n & A. Rabiei n

author keywords: composite metal foam; surface emissivity; heat capacity; thermal protection
Sources: ORCID, Web Of Science, NC State University Libraries
Added: June 1, 2024

2023 article

A Study on Welding of Porous Metals and Metallic Foams

Rabiei, A., Cance, J., & Chacko, Z. (2023, November 28). ADVANCED ENGINEERING MATERIALS, Vol. 11.

By: A. Rabiei n, J. Cance n & Z. Chacko n

author keywords: friction stir welding; induction welding; metal foams; scanning electron microscope; tensile tests
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: December 5, 2023

2023 article

A computational and experimental approach to evaluate thermal conductivity and diffusivity of steel composite metal foam

Chacko, Z., Amoafo-Yeboah, N., Cance, J., & Rabiei, A. (2023, September 18). JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, Vol. 9.

By: Z. Chacko n, N. Amoafo-Yeboah n, J. Cance n & A. Rabiei n

author keywords: Composite metal foam; Computational modeling; ANSYS Fluent; Laser flash technique; Thermal diffusivity; Thermal conductivity
UN Sustainable Development Goal Categories
Sources: Web Of Science, ORCID, NC State University Libraries
Added: October 16, 2023

2023 journal article

Dwell-fatigue crack growth behaviour of Alloy 709

ACTA MATERIALIA, 249.

author keywords: Dwell-fatigue crack growth; Creep-fatigue interactions; Crack growth mechanisms; Alloy 709; Type 316H; Austenitic stainless steels
Sources: Web Of Science, NC State University Libraries
Added: April 11, 2023

2023 article

Thermal Response of Steel-Steel Composite Metal Foams under Small-Scale Torch-Fire Conditions

Amoafo-Yeboah, N., & Rabiei, A. (2023, June 15). ADVANCED ENGINEERING MATERIALS, Vol. 6.

By: N. Amoafo-Yeboah n & A. Rabiei n

author keywords: fire dynamics simulator; steel-steel composite metal foams; tank car; thermal protection; torch fire
UN Sustainable Development Goal Categories
Sources: Web Of Science, ORCID, NC State University Libraries
Added: July 3, 2023

2023 journal article

Thermal Response of Steel-Steel Composite Metal Foams under Small-Scale Torch-Fire Conditions

ADVANCED ENGINEERING MATERIALS, 25(19).

By: N. Amoafo-Yeboah n & A. Rabiei n

Sources: ORCID, Web Of Science, NC State University Libraries
Added: December 5, 2023

2022 article

A Study on Thermal Properties of Composite Metal Foams for Applications in Tank Cars Carrying Hazardous Materials

METAL-MATRIX COMPOSITES: ADVANCES IN PROCESSING, CHARACTERIZATION, PERFORMANCE AND ANALYSIS, pp. 367–379.

By: A. Rabiei n, N. Amoafo-Yeboah n, E. Huseboe n & C. Scemama n

author keywords: Composite metal foam; Thermal conductivity; Specific heat capacity; Coefficient of thermal expansion; Thermal diffusivity
Sources: Web Of Science, NC State University Libraries
Added: April 25, 2022

2022 journal article

A numerical and experimental approach to compare the effect of sample thickness in small in-situ SEM and large ex-situ tensile testing in Alloy 709

MATERIALS CHARACTERIZATION, 184.

By: A. Lall n, P. Bowen* & A. Rabiei n

author keywords: Alloy 709; Tensile test; Size effect; Necking; Grain size; Finite element modeling
Sources: Web Of Science, NC State University Libraries
Added: January 10, 2022

2022 journal article

A study on the creep behavior of alloy 709 using in-situ scanning electron microscopy

MATERIALS CHARACTERIZATION, 183.

By: A. Lall n, P. Bowen* & A. Rabiei n

author keywords: In-situ scanning electron microscope; Creep; Alloy 709; Austenitic stainless steel
Sources: Web Of Science, NC State University Libraries
Added: January 10, 2022

2021 journal article

Effect of aging on failure mechanism of Alloy 709 at various temperatures

MATERIALS CHARACTERIZATION, 171.

By: A. Lall n, P. Bowen* & A. Rabiei n

author keywords: Characterization; Electron microscopy; Micromechanics; Stress/strain measurements; Alloy 709; Aging; In-situ SEM
Sources: Web Of Science, NC State University Libraries
Added: March 8, 2021

2021 article

In-situ Scanning Electron Microscopic Observation of Creep and Creep-Fatigue of Alloy 709

TMS 2021 150TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 839–852.

By: A. Lall n, R. Ding*, P. Bowen* & A. Rabiei n

author keywords: In-situ SEM characterization; High-temperature test; Advanced steel alloy 709
Sources: Web Of Science, NC State University Libraries
Added: September 26, 2022

2021 article

Recent Advances in the Analysis, Measurement, and Properties of Composite Metal Foams

METAL-MATRIX COMPOSITES: ADVANCES IN ANALYSIS, MEASUREMENT, AND OBSERVATIONS, pp. 201–216.

By: A. Rabiei n, B. Lattimer* & E. Bearinger*

author keywords: Composite metal foams; Hazardous materials; Tank car; Iron and steel; Characterization
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: September 19, 2022

2021 journal article

Simulated pool fire testing and modeling of a composite metal foam

FIRE AND MATERIALS, 45(3), 379–386.

By: A. Rabiei n, K. Karimpour n, M. Janssens* & D. Basu*

author keywords: composite metal foam; COMSOL Multiphysics; Fire Dynamics Simulator; rail tank car; simulated pool fire test
UN Sustainable Development Goal Categories
Sources: Web Of Science, ORCID, NC State University Libraries
Added: October 5, 2020

2021 journal article

Tensile properties of composite metal foam and composite metal foam core sandwich panels

JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 23(8), 3773–3793.

By: J. Marx n & A. Rabiei n

author keywords: Composite metal foam; tension; sandwich panel; metal foam; diffusion bonding
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 10, 2020

2020 journal article

A Study on Puncture Resistance of Composite Metal Foam Core Sandwich Panels

ADVANCED ENGINEERING MATERIALS, 22(12).

By: A. Rabiei n, M. Portanova*, J. Marx n, C. Scott n & J. Schwandt n

author keywords: composite metal foam; energy absorption; impact; punctures; sandwich panels
UN Sustainable Development Goal Categories
Sources: Web Of Science, ORCID, NC State University Libraries
Added: September 7, 2020

2020 journal article

Fatigue crack growth resistance of the austenitic stainless steel Alloy 709 at elevated temperatures

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 9(6), 12955–12969.

author keywords: Alloy 709; Fatigue crack growth; In-Situ testing; FIB-TEM; Environmental effect
Sources: Web Of Science, ORCID, NC State University Libraries
Added: February 8, 2021

2020 journal article

Performance of Composite Metal Foam Armors against Various Threat Sizes

JOURNAL OF COMPOSITES SCIENCE, 4(4).

By: J. Marx n, M. Portanova* & A. Rabiei n

author keywords: composite metal foam; ballistic impact; metal foam structure; hard armor
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: January 19, 2021

2020 journal article

Polymer infused composite metal foam as a potential aircraft leading edge material

APPLIED SURFACE SCIENCE, 505.

By: J. Marx n, S. Robbins*, Z. Grady*, F. Palmieri*, C. Wohl* & A. Rabiei n

author keywords: Composite metal foam; Insect residue adhesion; Wear rate; Erosion resistance; Epoxy infusion
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: March 16, 2020

2020 journal article

Steel-steel composite metal foam in simulated pool fire testing

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 153.

By: A. Rabiei n, K. Karimpour n, D. Basu* & M. Janssens*

author keywords: Composite metal foams; Transport hazardous materials; Pool fire test; Tank car; Fire dynamics simulator
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: May 26, 2020

2020 journal article

Study on the Microstructure and Compression of Composite Metal Foam Core Sandwich Panels

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 51(10), 5187–5197.

By: J. Marx n & A. Rabiei n

UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: September 14, 2020

2019 journal article

Ballistic performance of composite metal foam against large caliber threats

COMPOSITE STRUCTURES, 225.

By: J. Marx n, M. Portanova* & A. Rabiei n

author keywords: Composite metal foam; Ballistic testing; ANSYS AUTODYN; Vehicle armor; Hard armor
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 26, 2019

2019 journal article

Deformation microstructure and tensile properties of Alloy 709 at different temperatures

MATERIALS & DESIGN, 176.

author keywords: Alloy 709; Tensile; Microstructure; TEM
Sources: Web Of Science, NC State University Libraries
Added: June 17, 2019

2019 journal article

Microstructural evolution of Alloy 709 during aging

MATERIALS CHARACTERIZATION, 154, 400–423.

author keywords: Alloy 709; Microstructure; Aging; TEM
Sources: Web Of Science, NC State University Libraries
Added: August 12, 2019

2019 journal article

Performance of Alloy 709 under creep-fatigue at various dwell times

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 761.

By: A. Lall n, S. Sarkar n, R. Ding*, P. Bowen* & A. Rabiei n

author keywords: Austenitic stainless steel; Alloy 709; In-situ scanning electron microscope; Electron backscatter diffraction; Creep fatigue
Sources: Web Of Science, NC State University Libraries
Added: August 19, 2019

2018 journal article

A study on blast and fragment resistance of composite metal foams through experimental and modeling approaches

COMPOSITE STRUCTURES, 194, 652–661.

By: J. Marx n, M. Portanova* & A. Rabiei n

author keywords: Composite metal foam; Blast and frag; IMPETUS Afea; Blast armor
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2018 journal article

A study on tensile properties of Alloy 709 at various temperatures

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 733, 338–349.

By: S. Upadhayay n, H. Li*, P. Bowen* & A. Rabiei n

author keywords: Austenitic stainless steel; Alloy 709; Fractography; In-situ Scanning electron microscope; Electron backscatter diffraction
Sources: Web Of Science, NC State University Libraries
Added: October 19, 2018

2017 journal article

Overview of Composite Metal Foams and Their Properties and Performance

Advanced Engineering Materials, 19(11), 1600776.

By: J. Marx & A. Rabiei*

UN Sustainable Development Goal Categories
Sources: Crossref, NC State University Libraries
Added: December 16, 2019

2017 journal article

Preparation, characterization and in vitro response of bioactive coatings on polyether ether ketone

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 105(3), 560–567.

By: J. Durham n, M. Allen* & A. Rabiei n

author keywords: bioactive coatings; hydroxyapatite; PEEK; physical vapor deposition; crystallinity
MeSH headings : Animals; Benzophenones; Cell Line; Coated Materials, Biocompatible / chemistry; Coated Materials, Biocompatible / pharmacology; Durapatite / chemistry; Durapatite / pharmacology; Ketones / chemistry; Ketones / pharmacology; Materials Testing; Mice; Osteoblasts / metabolism; Polyethylene Glycols / chemistry; Polyethylene Glycols / pharmacology; Polymers; Yttrium / chemistry; Yttrium / pharmacology; Zirconium / chemistry; Zirconium / pharmacology
TL;DR: PEEK was coated via ion-beam-assisted deposition using a two-layer design of yttria-stabilized zirconia as a heat-protection layer, and hydroxyapatite as a top layer to improve osseointegration and was found to be amorphous and free of porosities in its as-deposited state. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2016 journal article

Deposition, heat treatment and characterization of two layer bioactive coatings on cylindrical PEEK

SURFACE & COATINGS TECHNOLOGY, 301, 106–113.

By: J. Durham n & A. Rabiei n

author keywords: Hydroxyapatite; Polyether ether ketone; Adhesion; Ion beam assisted deposition
TL;DR: The adhesion strength of as-deposited HA/YSZ coatings on smooth, polished PEEK surfaces was mostly unaffected by microwave heat treatment, but decreased with additional autoclave treatment, while increasing surface roughness showed improvement of bond strength. (via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2016 journal article

Experimental and computational studies on the thermal behavior and fire retardant properties of composite metal foams

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 106, 70–79.

By: S. Chen n, J. Marx n & A. Rabiei n

author keywords: Composite metal foams; Specific heat; Effective thermal conductivity; Coefficient of thermal expansion; Flame retardant
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2016 journal article

Hydroxyapatite coating on PEEK implants: Biomechanical and histological study in a rabbit model

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 68, 723–731.

By: J. Durham n, S. Montelongo*, J. Ong*, T. Guda*, M. Allen* & A. Rabiei n

author keywords: Coating; Hydroxyapatite; Ion beam assisted deposition; Polyetheretherketone; Osseointegration
MeSH headings : Animals; Benzophenones; Bone Regeneration / drug effects; Bone Substitutes / chemistry; Bone Substitutes / pharmacology; Bone-Implant Interface; Coated Materials, Biocompatible / chemistry; Coated Materials, Biocompatible / pharmacology; Durapatite / chemistry; Durapatite / pharmacology; Femur / injuries; Femur / metabolism; Femur / pathology; Implants, Experimental; Ketones / chemistry; Ketones / pharmacology; Male; Materials Testing; Polyethylene Glycols / chemistry; Polyethylene Glycols / pharmacology; Polymers; Rabbits; Yttrium / chemistry; Yttrium / pharmacology; Zirconium / chemistry; Zirconium / pharmacology
TL;DR: The study offers a novel method to coat PEEK implants with improved osseointegration and heat-treated HA/YSZ coatings showed improved implant fixation as well as higher bone regeneration and bone-implant contact area compared to uncoated PEEK. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2016 journal article

Retraction notice to Processing, characterization and failure analysis of a novel thin sheet metal [Mater. Des. 86(2016) 752–760]

Materials & Design, 101, 366.

By: A. Rabiei*

Sources: Crossref, NC State University Libraries
Added: April 8, 2021

2015 journal article

Attenuation efficiency of X-ray and comparison to gamma ray and neutrons in composite metal foams

RADIATION PHYSICS AND CHEMISTRY, 117, 12–22.

By: S. Chen n, M. Bourham n & A. Rabiei n

author keywords: Composite metal foams; X-ray; High-Z elements; Gamma ray; Neutron; Attenuation
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

Ballistic performance of composite metal foams

COMPOSITE STRUCTURES, 125, 202–211.

By: M. Garcia-Avila n, M. Portanova* & A. Rabiei n

author keywords: Composite metal foam; Dynamic loading; Hollow spheres; Powder metallurgy; Ballistics; Finite element analysis
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

Effect of Sphere Properties on Microstructure and Mechanical Performance of Cast Composite Metal Foams

METALS, 5(2), 822–835.

By: M. Garcia-Avila n & A. Rabiei n

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

High strain rate behavior of composite metal foams

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 631, 248–257.

By: Y. Alvandi-Tabrizi n, D. Whisler*, H. Kim* & A. Rabiei n

author keywords: Composite metal foam; Dynamic loading; Quasi-static loading; Hopkinson bar; Casting; Powder metallurgy
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

Neutrons attenuation on composite metal foams and hybrid open-cell Al foam

RADIATION PHYSICS AND CHEMISTRY, 109, 27–39.

By: S. Chen n, M. Bourham n & A. Rabiei n

author keywords: Metal foam; Neutron attenuation; Monte Carlo simulation; Areal density; Radiation shielding
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 article

Processing, characterization and failure analysis of a novel thin sheet metal (Retracted article. See vol. 101, pg. 366, 2016)

Rabiei, A. (2015, December 5). MATERIALS & DESIGN, Vol. 86, pp. 752–760.

By: A. Rabiei*

author keywords: Roll bonding; Sheet metal; Foaming agent
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2014 book

8th International Conference on Porous Metals and Metallic Foams

In Procedia - Materials Science (Vol. 4). Elseiver.

Afsaneh Rabiei

Ed(s): A. Rabiei

Source: NC State University Libraries
Added: August 16, 2021

2014 journal article

Applications of Open-cell and Closed-cell Metal Foams for Radiation Shielding

Procedia Materials Science, 4, 293–298.

By: S. Chen, M. Bourham* & A. Rabiei*

author keywords: Gamma ray; Neutron; Areal density; Radiation shielding
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: February 24, 2020

2014 journal article

Ballistic Performance of a Composite Metal Foam-ceramic Armor System

Procedia Materials Science, 4, 151–156.

By: M. Garcia-Avila, M. Portanova* & A. Rabiei*

author keywords: Composite metal foam; Powder metallurgy; Ballistic; Energy absorption
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: August 28, 2020

2014 journal article

Introduction of a New Type of Metal Foam (Metallic Bubble Wrap)

Procedia Materials Science, 4, 3–7.

By: D. Miao n & A. Rabiei n

author keywords: Metallic bubble wrap; roll bonding; three-point bending test; tensile test; mechanical properties
Sources: Crossref, NC State University Libraries
Added: August 28, 2020

2014 journal article

Novel light-weight materials for shielding gamma ray

Radiation Physics and Chemistry, 96, 27–37.

By: S. Chen*, M. Bourham* & A. Rabiei*

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: NC State University Libraries, NC State University Libraries
Added: August 6, 2018

2014 journal article

Preface

Procedia Materials Science, 4, 1.

By: A. Rabiei n

Sources: Crossref, NC State University Libraries
Added: April 8, 2021

2014 journal article

Use of Composite Metal Foam for Improving Absorption of Collision Forces

Procedia Materials Science, 4, 377–382.

By: Y. Alvandi-Tabrizi n & A. Rabiei n

author keywords: Compiste metal foam; Dynamic loading; Powder Metallurgy; Split Hopkinson pressure bar
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Crossref, NC State University Libraries
Added: August 28, 2020

2013 journal article

Effect of various parameters on properties of composite steel foams under variety of loading rates

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 564, 539–547.

By: A. Rabiei n & M. Garcia-Avila n

author keywords: Composite metal foam; Dynamic loading; Quasi-static loading; Hollow spheres; Powder metallurgy
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2013 book

Metal Foams 2013

In Metals (Vol. 3). Basel, Switzerland: MDPI.

Afsaneh Rabiei

Ed(s): A. Rabiei

Source: NC State University Libraries
Added: August 16, 2021

2013 journal article

Processing and evaluation of bioactive coatings on polymeric implants

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 101(9), 2621–2629.

By: A. Rabiei n & S. Sandukas n

author keywords: hydroxyapatite coating; PEEK; osteoblast response; magnetron sputtering; spinal fusion cage
MeSH headings : Benzophenones; Cell Adhesion; Cell Line; Cell Proliferation; Coated Materials, Biocompatible / chemistry; Durapatite / chemistry; Humans; Ketones / chemistry; Materials Testing; Microscopy, Electron, Scanning; Osteoblasts / cytology; Osteoblasts / metabolism; Polyethylene Glycols / chemistry; Polymers; Prostheses and Implants; Spinal Fusion / methods; Yttrium / chemistry; Zirconium / chemistry
TL;DR: It is suggested that the existence of the crystalline YSZ layer aids in the formation of the HA layer upon heating, possibly lowering the activation energy for crystallization by providing nucleation sites for HA grain formation. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2012 journal article

Antibacterial effect and cytotoxicity of Ag-doped functionally graded hydroxyapatite coatings

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 100B(2), 553–561.

By: X. Bai n, S. Sandukas n, M. Appleford*, J. Ong* & A. Rabiei n

author keywords: hydroxyapatite coatings; antimicrobial; antibacterial effect; cytotoxicity
MeSH headings : Anti-Bacterial Agents / chemistry; Anti-Bacterial Agents / pharmacology; Cell Line; Coated Materials, Biocompatible; Durapatite / chemistry; Durapatite / pharmacology; Humans; Materials Testing; Osteoblasts / cytology; Osteoblasts / metabolism; Silver / chemistry; Silver / pharmacology; Staphylococcus aureus / growth & development; Titanium / chemistry; Titanium / pharmacology
TL;DR: Considering both the antibacterial and cytotoxicity effects, it is suggested that the 3 wt % of Ag in FGHA coatings can be favorable. (via Semantic Scholar)
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2011 journal article

Effect of processing parameters on the microstructure and mechanical properties of Al-steel composite foam

JOURNAL OF MATERIALS SCIENCE, 46(13), 4574–4581.

By: L. Vendra n, J. Brown n & A. Rabiei n

UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2011 journal article

Osteoblast adhesion to functionally graded hydroxyapatite coatings doped with silver

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 97A(4), 490–497.

By: S. Sandukas n, A. Yamamoto* & A. Rabiei n

author keywords: hydroxyapatite coating; osteoblast; biological response; functionally graded; silver
MeSH headings : Animals; Cell Adhesion / drug effects; Cell Count; Cells, Cultured; Coated Materials, Biocompatible / pharmacology; Durapatite / pharmacology; Mice; Microscopy, Electron, Transmission; Microscopy, Fluorescence; Osteoblasts / cytology; Osteoblasts / drug effects; Photoelectron Spectroscopy; Silver / pharmacology; Surface Properties / drug effects
TL;DR: FGHA-Ag1 coating promoted the highest degree of osteoblast adhesion because of optimal dissolution rate and nontoxic Ag percentage. (via Semantic Scholar)
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2010 journal article

A novel ultra-light structure for radiation shielding

MATERIALS & DESIGN, 31(4), 2140–2146.

By: S. Xu n, M. Bourham n & A. Rabiei n

Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2010 journal article

Bending Properties of Al-Steel and Steel-Steel Composite Metal Foams

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41A(11), 2784–2793.

By: J. Brown n, L. Vendra n & A. Rabiei n

UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2010 patent

Composite metal foam and methods of preparation thereof

By: A. Rabiei

Source: NC State University Libraries
Added: August 6, 2018

2010 journal article

Evaluation of modulus of elasticity of composite metal foams by experimental and numerical techniques

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(7-8), 1784–1790.

By: L. Vendra n & A. Rabiei n

author keywords: Composite foams; Compression; Elastic modulus; Modeling
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2010 journal article

Functionally graded hydroxyapatite coatings doped with antibacterial components

ACTA BIOMATERIALIA, 6(6), 2264–2273.

By: X. Bai n, K. More*, C. Rouleau* & A. Rabiei n

author keywords: Ion beam processing; Hydroxyapatite coating; Adhesion strength; Antimicrobial
MeSH headings : Anti-Bacterial Agents / chemistry; Cell Culture Techniques / methods; Coated Materials, Biocompatible / chemistry; Crystallization / methods; Durapatite / chemistry; Extracellular Matrix / chemistry; Materials Testing; Surface Properties; Tissue Engineering / methods
TL;DR: A series of functionally graded hydroxyapatite (FGHA) coatings incorporated with various percentages of silver were deposited on titanium substrates using ion beam-assisted deposition and optical observations of failed areas illustrated that the dominant failure mechanism was epoxy failure, and FGHA coating delamination was not observed. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2010 article

Recent developments and the future of bone mimicking: materials for use in biomedical implants

Rabiei, A. (2010, November). EXPERT REVIEW OF MEDICAL DEVICES, Vol. 7, pp. 727–729.

By: A. Rabiei n

author keywords: cobalt-chromium alloys; composite metal foam; implantable materials; modulus of elasticity; stainless steel; stiffness; stress shielding; titanium alloys
MeSH headings : Bone Substitutes / chemistry; Forecasting; Humans; Prostheses and Implants / trends
TL;DR: There are 206 bones in the human skeleton that provide shape and support for the body, act as levers for muscles, and protect vital organs, and a good hard tissue replacement in the body is needed. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2009 journal article

A comparison of composite metal foam's properties and other comparable metal foams

MATERIALS LETTERS, 63(5), 533–536.

By: A. Rabiei n & L. Vendra n

author keywords: Casting; Composite materials; Metal foams; Mechanical properties; Microstructure; Powder metallurgy
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2009 book

Biomedical Materials

Afsaneh Rabiei

Sources: Crossref, NC State University Libraries
Added: April 8, 2021

2009 journal article

Deposition and investigation of functionally graded calcium phosphate coatings on titanium

ACTA BIOMATERIALIA, 5(9), 3563–3572.

By: X. Bai n, S. Sandukas n, M. Appleford*, J. Ong* & A. Rabiei n

author keywords: Calcium phosphate coatings; Biomedical implants; Bioactivity; Adhesion strength
MeSH headings : Animals; Calcium Phosphates / chemistry; Cells, Cultured; Coated Materials, Biocompatible / chemistry; Humans; Materials Testing; Microscopy, Atomic Force; Microscopy, Electron, Transmission; Spectroscopy, Fourier Transform Infrared; Stress, Mechanical; Surface Properties; Titanium / chemistry; X-Ray Diffraction
TL;DR: The adhesion strength results helped us to identify the best setup for substrate temperature and processing parameters to begin the deposition, the culture test and XPS results helped identifying the optimum parameters for the last stage of deposition. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2009 journal article

Fatigue in aluminum-steel and steel-steel composite foams

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 517(1-2), 146–153.

By: L. Vendra n, B. Neville n & A. Rabiei n

author keywords: Composite metal foams; Fatigue; Mechanical testing; Casting; Powder processing
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2008 journal article

Composite metal foams processed through powder metallurgy

MATERIALS & DESIGN, 29(2), 388–396.

By: B. Neville n & A. Rabiei n

author keywords: composite metal foams; powder metallurgy; energy absorption
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2008 journal article

Effect of substrate temperature on mechanical properties of calcium phosphate coatings

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 85B(1), 60–67.

By: T. Blalock n, X. Bai n, R. Narayan n & A. Rabiei n

MeSH headings : Adhesiveness; Calcium Phosphates / chemistry; Coated Materials, Biocompatible / chemistry; Durapatite / chemistry; Materials Testing; Surface Properties; Temperature; Titanium / chemistry
TL;DR: It is concluded that depositing FGHA coatings would better be started at 550-650 degrees C to maintain superior properties of the film at the interface and the residual stresses caused by different Coefficient of Thermal Expansions between the substrate and coatings are not the only factor controlling the bonding strength and mechanical properties of these samples. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2008 journal article

Fracture behavior of particle reinforced metal matrix composites

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 39(2), 294–300.

By: A. Rabiei n, L. Vendra n & T. Kishi*

author keywords: particle reinforcement; metal matrix composites; fracture toughness; fractography
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2007 article

A novel technique for processing functionally graded HA coatings

Rabiei, A., Thomas, B., Neville, B., Lee, J. W., & Cuomo, J. (2007, April). MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, Vol. 27, pp. 523–528.

By: A. Rabiei n, B. Thomas n, B. Neville n, J. Lee n & J. Cuomo n

author keywords: hydroxyapatite; graded crystallinity; ion beam-assisted deposition
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2007 journal article

A study on aluminum-steel composite metal foam processed by casting

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 465(1-2), 59–67.

By: L. Vendra n & A. Rabiei n

author keywords: composite metal foam; microstructures; hollow spheres; compression testing; energy absorption
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2007 journal article

A study on microstructure and properties of calcium phosphate coatings processed using ion beam assisted deposition on heated substrates

SURFACE & COATINGS TECHNOLOGY, 201(12), 5850–5858.

By: T. Blalock n, X. Bai n & A. Rabiei n

author keywords: hydroxyapatite coating; biomedical implant; TEM; XRD
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2007 journal article

A study on pressure drop and heat transfer in open cell metal foams for jet engine applications

MATERIALS & DESIGN, 28(2), 569–574.

By: W. Azzi n, W. Roberts n & A. Rabiei n

author keywords: open cell metal foam; pressure drop; jet engines
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2007 journal article

Magnetic properties of Ni-doped MgO diluted magnetic insulators Author(s

Applied Physics Letters, 90(13), 132511.

By: S. Ramachandran n, J. Narayan n & J. Prater

Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2007 article

Microstructure, mechanical properties, and biological response to functionally graded HA coatings

Rabiei, A., Blalock, T., Thomas, B., Cuomo, J., Yang, Y., & Ong, J. (2007, April). MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, Vol. 27, pp. 529–533.

By: A. Rabiei n, T. Blalock n, B. Thomas n, J. Cuomo n, Y. Yang* & J. Ong*

author keywords: hydroxyapatite; graded crystallinity; nano-grain
TL;DR: A biocompatible coating comprising an HA film with functionally graded crystallinity is being deposited on a heated substrate in an Ion Beam Ass Deposition (IBAD) system and results have shown superior mechanical properties and biological response to the functionally graded HA film. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2007 journal article

New Composite Metal Foams under Compressive Cyclic Loadings

Materials Science Forum, 539-543, 1868–1873.

By: A. Rabiei n, B. Neville n, N. Reese n & L. Vendra n

author keywords: metal foams; hollow spheres; fatigue loading; energy absorption
Sources: Crossref, NC State University Libraries
Added: August 28, 2020

2006 journal article

A study on functionally graded HA coatings processed using ion beam assisted deposition with in situ heat treatment

SURFACE & COATINGS TECHNOLOGY, 200(20-21), 6111–6116.

By: A. Rabiei n, B. Thomas n, C. Jin n, R. Narayan n, J. Cuomo n, Y. Yang*, J. Ong*

author keywords: hydroxyapatite; graded crystallinity; ion beam assisted deposition; nanoindentation; scratch adhesion test; sputtering
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2006 journal article

Microstructural study of titanium-palladium-nickel base thin film shape memory alloys

THIN SOLID FILMS, 500(1-2), 309–315.

By: J. Lee, B. Thomas* & A. Rabiei*

author keywords: shape memory alloy; deposition process; transmission electron spectroscopy; crystallization
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2006 article

Processing and characterization of a new composite metal foam

Rabiei, A., Vendra, L., Reese, N., Young, N., & Neville, B. P. (2006, September). MATERIALS TRANSACTIONS, Vol. 47, pp. 2148–2153.

By: A. Rabiei n, L. Vendra n, N. Reese n, N. Young n & B. Neville n

author keywords: metal foam; energy absorption; hollow spheres; compression strength; plateau stress
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2006 journal article

Residual stresses in TiPdNi base thin film shape memory alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 434(1-2), 124–130.

By: E. Baldwin n, B. Thomas n, J. Lee n & A. Rabiei n

author keywords: thin film; residual stress; shape memory alloys; annealing; ion beam assisted deposition
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2006 journal article

The use of functionally gradient materials in medicine

JOM, 58(7), 52–56.

By: R. Narayan n, L. Hobbs*, C. Jin n & A. Rabiei n

TL;DR: The development of functionally gradient Zr−Nb alloys, hydroxyapatite coatings, and diamondlike carbon-metal coatings for medical applications is reviewed. (via Semantic Scholar)
UN Sustainable Development Goal Categories
Sources: Web Of Science, NC State University Libraries, Crossref
Added: August 6, 2018

2005 journal article

A study on processing of a composite metal foam via casting

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 404(1-2), 159–164.

By: A. Rabiei n & . AT O'Neill

author keywords: closed cell foam; hollow spheres; casting; energy absorption; composite metal foam
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2005 journal article

Processing TiPdNi base thin-film shape memory alloys using ion beam assisted deposition

SURFACE & COATINGS TECHNOLOGY, 200(7), 2571–2579.

By: E. Baldwin*, B. Thomas*, J. Lee & A. Rabiei*

author keywords: shape memory alloy; ion beam assisted deposition; thin film; TiPdNi; heat treatment
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2000 journal article

A study on fracture behavior of particle reinforced metal matrix composites by using acoustic emission source characterization

Materials Science and Engineering: A, 293(1-2), 81–87.

By: A. Rabiei*, M. Enoki* & T. Kishi*

author keywords: acoustic emission; metal matrix composites; Green's function; void nucleation; coalescence
Sources: Crossref, NC State University Libraries
Added: August 28, 2020

2000 journal article

Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings

Acta Materialia, 48(15), 3963–3976.

By: A. Rabiei*

author keywords: coating; plasma spray; thermally activated process; scanning electron microscopy; fracture toughness
Sources: Crossref, NC State University Libraries
Added: August 28, 2020

2000 journal article

Heat generation during the fatigue of a cellular Al alloy

Metallurgical and Materials Transactions A, 31(4), 1129–1136.

By: A. Rabiei*, J. Hutchinson* & A. Evans*

Sources: Crossref, NC State University Libraries
Added: August 28, 2020

1999 journal article

Compression fatigue of a cellular Al alloy

Materials Science and Engineering: A, 269(1-2), 38–48.

By: Y. Sugimura*, A. Rabiei*, A. Evans*, A. Harte* & N. Fleck*

author keywords: cellular Al alloy; foam; fatigue; compression; strain mapping
Sources: Crossref, NC State University Libraries
Added: April 8, 2021

1999 journal article

Microstructure, deformation and cracking characteristics of thermal spray ferrous coatings

Materials Science and Engineering: A, 269(1-2), 152–165.

By: A. Rabiei*, D. Mumm*, J. Hutchinson*, R. Schweinfest*, M. Rühle* & A. Evans*

author keywords: thermal spray coating; local fracture toughness; indentation test; high velocity oxyfuel process; plasma transfer wire arc process; atomic force microscopy
Sources: Crossref, NC State University Libraries
Added: April 8, 2021

1997 journal article

A new method based on simultaneous acoustic emission and in-situ sem observation to evaluate the fracture behavior of metal matrix composites

Scripta Materialia, 37(6), 801–808.

By: A. Rabiei*, B. Kim, M. Enoki & T. Kishi

Sources: Crossref, NC State University Libraries
Added: August 28, 2020

1996 journal article

Fracture Behavior in 6061 Al Alloy Matrix Composites with Different Reinforcements

Materials Transactions, JIM, 37(5), 1148–1155.

By: A. Rabiei*, B. Kim*, M. Enoki* & T. Kishi*

Sources: Crossref, NC State University Libraries
Added: August 28, 2020

1993 book

Solidification and Casting

Tehran, Iran: Jazil Publishers.

By: A. Rabiei

Source: NC State University Libraries
Added: October 23, 2021

1992 book

Metallography

(1st ed.). Tehran, Iran: Jazil Publishers.

By: A. Rabiei

Source: NC State University Libraries
Added: October 23, 2021

1992 journal article

Welding of Plastics

DMT Scientific and Technological Journal, (3).

By: A. Rabiei

Source: NC State University Libraries
Added: October 23, 2021

1990 book

Welding of Plastics

Tehran, Iran: Shahrab Publishers.

By: A. Rabiei

Source: NC State University Libraries
Added: October 23, 2021

1984 book

Engineering Physical Metallurgy

(1st ed.). Tehran, Iran: Hoseinian Publishers.

By: A. Rabiei

Source: NC State University Libraries
Added: October 23, 2021

Employment

Updated: July 25th, 2015 21:49

North Carolina State University Raleigh, NC, US

Education

Updated: July 25th, 2015 21:48

1994 - 1997

University of Tokyo Tokyo, JP
PhD Research Center for Advanced Science and Technology

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.