Bharat Gwalani

Gwalani, B., Escobar, J., Song, M., Thomas, J., Silverstein, J., Chuang, A. C., … Devaraj, A. (2024). Mechanisms for high creep resistance in alumina forming austenitic (AFA) alloys. ACTA MATERIALIA, 263. https://doi.org/10.1016/j.actamat.2023.119494

Gwalani, B., Li, X., Nittala, A., Choi, W., Reza-E-Rabby, M., Atehortua, J. E., … Kappagantula, K. (2024). Unprecedented electrical performance of friction-extruded copper-graphene composites. MATERIALS & DESIGN, 237. https://doi.org/10.1016/j.matdes.2023.112555

Garg, M., Grewal, H. S., Sharma, R. K., Gwalani, B., & Arora, H. S. (2023). Circumventing strength-ductility paradox in high entropy alloys through deformation processing. JOURNAL OF ALLOYS AND COMPOUNDS, 933. https://doi.org/10.1016/j.jallcom.2022.167750

Fulmali, A. O., Patnaik, S., Rathore, D. K., Bhattacharjee, D., Gwalani, B., Ray, B. C., & Prusty, R. K. (2023). Enhanced extreme temperature bending and delamination resistance of GFRP composites through z-directional aligned nano-reinforcement: Emphasizing the effects of CNT functionalization. COMPOSITES SCIENCE AND TECHNOLOGY, 244. https://doi.org/10.1016/j.compscitech.2023.110272

Dasari, S., Sharma, A., Jiang, C., Gwalani, B., Lin, W.-C., Lo, K.-C., … Banerjee, R. (2023). Exceptional enhancement of mechanical properties in high-entropy alloys via thermodynamically guided local chemical ordering. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA, 120(23). https://doi.org/10.1073/pnas.2211787120

Srivastava, A., Das, H., Tamayo, D. R., Li, L., Pole, M., Gwalani, B., … Reza-E-Rabby, M. (2023, August 10). Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 8. https://doi.org/10.1007/s00170-023-12111-8

Srivastava, A., Das, H., Tamayo, D. R., Li, L., Pole, M., Gwalani, B., … Reza-E-Rabby, M. (2023, October). Extent of interlocking and metallurgical bonding in friction riveting of aluminum alloy to steel (vol 128, pg 7, 2023). INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 128, pp. 2913–2913. https://doi.org/10.1007/s00170-023-12219-x

Thomas, A., Perumal, G., Padmanaban, D. B., Ma, X., Kumar, A., Sharma, R. K., … Arora, H. S. (2023). High strain-rate driven nano-tubular architecture in NiMn alloy for supercapacitor electrodes. CHEMICAL ENGINEERING JOURNAL, 465. https://doi.org/10.1016/j.cej.2023.143008

Kautz, E. J., Zelenyuk, A., Gwalani, B., Olszta, M. J., Phillips, M. C., Manard, M. J., … Harilal, S. S. (2023). Impact of environmental oxygen on nanoparticle formation and agglomeration in aluminum laser ablation plumes. JOURNAL OF CHEMICAL PHYSICS, 159(17). https://doi.org/10.1063/5.0167400

Sharma, A., Dasari, S., Ingale, T., Jiang, C., Gwalani, B., Srinivasan, S. G., & Banerjee, R. (2023). Introducing local chemical ordering to trigger a planar-slip-initiated strain-hardening mechanism in high entropy alloys. ACTA MATERIALIA, 258. https://doi.org/10.1016/j.actamat.2023.119248

Kautz, E., Gwalani, B., Yu, Z., Varga, T., Geelhood, K., Devaraj, A., & Senor, D. (2023). [Review of Investigating zirconium alloy corrosion with advanced experimental techniques: A review]. JOURNAL OF NUCLEAR MATERIALS, 585. https://doi.org/10.1016/j.jnucmat.2023.154586

Garg, M., Grewal, H. S., Sharma, R. K., Gwalani, B., & Arora, H. S. (2023). Limiting oxidation of high entropy alloy via high strain-rate deformation: Insights from electrochemical impedance spectroscopy. MATERIALS CHEMISTRY AND PHYSICS, 294. https://doi.org/10.1016/j.matchemphys.2022.127017

Song, M., Liu, J., Ma, X., Pang, Q., Olszta, M. J., Silverstein, J., … Gwalani, B. (2023). Mass transport in a highly immiscible alloy on extended shear deformation. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 134, 197–208. https://doi.org/10.1016/j.jmst.2022.06.029

Escobar, J., Silverstein, J., Ishrak, F., Li, L., Soulami, A., Li, S., … Gwalani, B. (2023). Microstructural evolution in shear-punch tests: A comparative study of pure Cu and Cu-Cr alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 886. https://doi.org/10.1016/j.msea.2023.145715

Pole, M., Lu, Z., Ajantiwalay, T. A., Olszta, M., Tripathi, S., Yu, A., … Gwalani, B. (2023). Modes of strain accommodation in Cu-Nb multilayered thin film on indentation and cyclic shear. SURFACES AND INTERFACES, 37. https://doi.org/10.1016/j.surfin.2023.102712

Li, Z., Rao, H., Atwi, R., Sivakumar, B. M., Gwalani, B., Gray, S., … Pol, V. G. (2023). Non-polar ether-based electrolyte solutions for stable high-voltage non-aqueous lithium metal batteries. Nature Communications. https://doi.org/10.1038/s41467-023-36647-1

Thomas, A., Kumar, A., Perumal, G., Sharma, R. K., Manivasagam, V., Popat, K., … Arora, H. S. (2023, January 20). Oxygen-Vacancy Abundant Nanoporous Ni/NiMnO3/MnO2@NiMn Electrodes with Ultrahigh Capacitance and Energy Density for Supercapacitors. ACS APPLIED MATERIALS & INTERFACES, Vol. 1. https://doi.org/10.1021/acsami.2c16818

Ajantiwalay, T., Ma, X., Yu, A., Pole, M., Silverstein, J., Mathaudhu, S., … Gwalani, B. (2023). Shear deformation of pure-Cu and Cu/Nb nano-laminates using micromechanical testing. SCRIPTA MATERIALIA, 230. https://doi.org/10.1016/j.scriptamat.2023.115403

Nittala, A., Smith, J., Gwalani, B., Silverstein, J., Kraft, F. F., & Kappagantula, K. (2023). Simultaneously improved electrical and mechanical performance of hot-extruded bulk scale aluminum-graphene wires. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 293. https://doi.org/10.1016/j.mseb.2023.116452

Frazier, W., Gwalani, B., Escobar, J., Silverstein, J., & Kappagantula, K. S. (2022). A Finite Difference Analysis of the Effect of Graphene Additions on the Electrical Conductivity of Polycrystalline Copper. TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings, 705–712. https://doi.org/10.1007/978-3-030-92381-5_67

Frazier, W. E., Li, L., Gwalani, B., Silverstein, J., Devaraj, A., Soulami, A., & Sushko, P. V. (2022). An Approach for the Microstructure-Sensitive Simulation of Shear-Induced Deformation and Recrystallization in Al–Si Alloys. Metallurgical and Materials Transactions A, 53, 1450–1461. https://doi.org/10.1007/s11661-022-06606-4

Gwalani, B., Pole, M., Whalen, K., Li, S., Yu, A., O'Callahan, B., … Kappagantula, K. (2022). Atomistic understanding of extreme strain shear deformation of Copper-Graphene composites. Carbon, 198, 63–69. https://doi.org/10.1016/j.carbon.2022.07.013

Yu, A., Pole, M., Atehortua, J. D. E., Bozhilov, K., Liu, J., Silverstein, J. A., … Gwalani, B. (2022). Decoupling of strain and temperature effects on microstructural evolution during high shear strain deformation. Materialia. https://doi.org/10.1016/j.mtla.2022.101402

Gwalani, B., Pang, Q., Yu, A., Fu, W., Li, L., Pole, M., … Devaraj, A. (2022). Extended Shear Deformation of the Immiscible Cu–Nb Alloy Resulting in Nanostructuring and Oxygen Ingress with Enhancement in Mechanical Properties. ACS Omega, 7(16), 13721–13736. https://doi.org/10.1021/acsomega.1c07368

Wang, T., Gwalani, B., Song, M., Ma, X., Liu, T., Das, H., … Whalen, S. (2022). Extreme shear deformation enables ultra-fast riveting of high strength aluminum alloys. Journal of Manufacturing Processes, 75, 814–825. https://doi.org/10.1016/j.jmapro.2022.01.046

Chen, N., Hu, S., Setyawan, W., Gwalani, B., Sushko, P. V., & Mathaudhu, S. N. (2022). Formation and dissociation of shear-induced high-energy dislocations: insight from molecular dynamics simulations. Modelling and Simulation in Materials Science and Engineering, 30(2), 025012. https://doi.org/10.1088/1361-651X/ac44a5

Kautz, E. J., Zelenyuk, A., Gwalani, B., Phillips, M. C., & Harilal, S. S. (2022, October 20). Gas-phase oxidation and nanoparticle formation in multi-element laser ablation plumes. PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 10. https://doi.org/10.1039/d2cp02437c

Garg, M., Grewal, H. S., Sharma, R. K., Gwalani, B., & Arora, H. S. (2022). High Oxidation Resistance of AlCoCrFeNi High Entropy Alloy through Severe Shear Deformation Processing. Journal of Alloys and Compounds, 917, 165385. https://doi.org/10.1016/j.jallcom.2022.165385

Lan, Q., Kovacs, A., Caron, J., Du, H., Song, D., Dasari, S., … Dunin-Borkowski, R. E. (2022). Highly complex magnetic behavior resulting from hierarchical phase separation in AlCo (Cr) FeNi high-entropy alloys. Iscience, 25(4), 104047. https://doi.org/10.1016/j.isci.2022.104047

Yu, A., Ross, K., Johnson, K., Jasthi, B. K., & Gwalani, B. (2022). In situ observations of grain growth and recovery in cold sprayed Ni-Y(2)O(3 )and CP-Ni coatings using hot-stage TEM. MATERIALS CHARACTERIZATION, 192. https://doi.org/10.1016/j.matchar.2022.112199

Das, H., Gwalani, B., Ma, X., & Upadhyay, P. (2022). Metallurgical joining of immiscible system: Pure Mg and pure Fe. Materials Characterization, 187, 111821. https://doi.org/10.1016/j.matchar.2022.111821

Blanc, L. E., Choi, Y., Shyamsunder, A., Key, B., Lapidus, S. H., Li, C., … Nazar, L. F. (2022, December 30). Phase Stability and Kinetics of Topotactic Dual Ca2+-Na+ Ion Electrochemistry in NaSICON NaV2(PO4)3. CHEMISTRY OF MATERIALS, Vol. 12. https://doi.org/10.1021/acs.chemmater.2c02816

Gwalani, B., Liu, J., Lambeets, S., Olszta, M., Poplawsky, J., Shyam, A., & Devaraj, A. (2022). Rapid assessment of interfacial stabilization mechanisms of metastable precipitates to accelerate high-temperature Al-alloy development. Materials Research Letters, 10(12), 771–779. https://doi.org/10.1080/21663831.2022.2102947

Li, S., Powell, C. A., Mathaudhu, S., Gwalani, B., Devaraj, A., & Wang, C. (2022). Review of recent progress on in situ TEM shear deformation: a retrospective and perspective view. Journal of Materials Science, 57, 12177–12201. https://doi.org/10.1007/s10853-022-07331-4

Ma, X., Gwalani, B., Tao, J., Efe, M., Olszta, M., Song, M., … Rohatgi, A. (2022). Shear strain gradient in Cu/Nb nanolaminates: Strain accommodation and chemical mixing. Acta Materialia. https://doi.org/10.1016/j.actamat.2022.117986

Reza-E-Rabby, M., Srivastava, A., Pole, M., Nittala, A., Gwalani, B., & Kappagantula, K. (2022). Solid Phase Processing of Lead-Free Brass with Carbon Additives. https://doi.org/10.2172/1983976

Ma, X., Olszta, M., Liu, J., Song, M., Pole, M., Pallaka, M. R., … Gwalani, B. (2022). Temperature-dependent formation of gradient structures with anomalous hardening in an Al-Si alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 858. https://doi.org/10.1016/j.msea.2022.144061

Gwalani, B., Song, M., Silverstein, J., Escobar, J., Wang, T., Pole, M., … Ross, K. (2022). Thermal stability and mechanical properties of cold-sprayed Nickel-Yttria coating. Scripta Materialia. https://doi.org/10.1016/j.scriptamat.2021.114281

Wang, T., Shukla, S., Gwalani, B., Sinha, S., Thapliyal, S., Frank, M., & Mishra, R. S. (2021). Co-introduction of precipitate hardening and TRIP in a TWIP high-entropy alloy using friction stir alloying. Scientific Reports, 11, 1579. https://doi.org/10.1038/s41598-021-81350-0

Ross, K., Pole, M., Gwalani, B., Montoya, T., Karasz, E., & Schaller, R. (2021). Cold Spray for Mitigation and Repair of Spent Nuclear Fuel Dry Storage Canisters. https://doi.org/10.2172/1880046

Dasari, S. Y.-J. C., Chang, Y. J., Jagetia, A., Vishal Soni, A. S., Gwalani, B., Gorsse, S., … Banerjee, R. (2021). Discontinuous precipitation leading to nano-rod intermetallic precipitates in an Al0.2Ti0.3Co1.5CrFeNi1.5 high entropy alloy results in an excellent strength-ductility combination. Materials Science and Engineering: A, 805, 140551.

Gwalani, B., Pole, M., Whalen, K., Li, S., O'Callahan, B., Tao, J., … Kappagantula, K. (2021). Evaluating Effects of Shear Processing on 2D Crystalline Materials in 3D Metal Matrices: Atomistic Understanding of High Shear Deformation of Copper Graphene Composites. https://doi.org/10.2172/1985708

Srimark, K., Dasari, S., Sharma, A., Wangyao, P., Gwalani, B., Rojhirunsakool, T., … Banerjee, R. (2021). Hierarchical phase evolution in a lamellar Al0. 7CoCrFeNi high entropy alloy involving competing metastable and stable phases. Scripta Materialia, 204, 114137. https://doi.org/10.1016/j.scriptamat.2021.114137

Gwalani, B., Dasari, S., Sharma, A., Soni, V., Shukla, S., Jagetia, A., … Banerjee, R. (2021). High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy. Acta Materialia, 219, 117234. https://doi.org/10.1016/j.actamat.2021.117234

Lan, Q., Kovacs, A., Caron, J., Du, H., Song, D., Dasari, S., … Dunn-Borkowski, R. E. (2021). Highly Complex Magnetic Structures Resulting From Hierarchical Phase Separation in AlCo (Cr) FeNi High Entropy Alloys (ArXiv Preprint No. 2104.00943). https://doi.org/10.48550/arXiv.2104.00943

Özdogru, B., Cha, Y., Gwalani, B., Murugesan, V., Song, M.-K., & Çapraz, Ö. Ö. (2021). In Situ Probing Potassium-Ion Intercalation-Induced Amorphization in Crystalline Iron Phosphate Cathode Materials. Nano Letters, 21(18), 7579–7586. https://doi.org/10.1021/acs.nanolett.1c02095

Li, S., Olszta, M., Li, L., Gwalani, B., Soulami, A., Powell, C. A., … Wang, C. (2021). In-situ TEM observation of shear induced microstructure evolution in Cu-Nb alloy. Scripta Materialia, 205, 114214. https://doi.org/10.1016/j.scriptamat.2021.114214

Gwalani, B., Torgerson, T., Dasari, S., Jagetia, A., Nartu, M. S. K. K. Y., Gangireddy, S., … Banerjee, R. (2021). Influence of fine-scale B2 precipitation on dynamic compression and wear properties in hypo-eutectic Al0. 5CoCrFeNi high-entropy alloy. Journal of Alloys and Compounds, 853, 157126. https://doi.org/10.1016/j.jallcom.2020.157126

Sharma, A., Gwalani, B., Dasari, S., Choudhuri, D., Chang, Y.-J., Gorsse, S., … Banerjee, R. (2021). Insights into Defect-Mediated Nucleation of Equilibrium B2 Phase in Face-Centered Cubic High-Entropy Alloys. JOM, 73, 2320–2331. https://doi.org/10.1007/s11837-021-04754-3

Das, H., Upadhyay, P., Wang, T., Gwalani, B., & Ma, X. (2021). Interfacial reaction during friction stir assisted scribe welding of immiscible Fe and Mg alloy system. Scientific Reports, 11, 1588. https://doi.org/10.1038/s41598-021-81266-9

Gwalani, B., Fu, W., Olszta, M., Silverstein, J., Yadav, D. R., Manimunda, P., … Devaraj, A. (2021). Lattice misorientation evolution and grain refinement in Al-Si alloys under high-strain shear deformation. Materialia, 18, 101146. https://doi.org/10.1016/j.mtla.2021.101146

Kautz, E. J., Schreiber, D. K., Devaraj, A., & Gwalani, B. (2021). Mechanistic insights into selective oxidation and corrosion of multi-principal element alloys from high resolution and in situ microscopy. Materialia, 18, 101148. https://doi.org/10.1016/j.mtla.2021.101148

Kaspar, T. C., Pang, Q., Sushko, P. V., Bowden, M. E., Tao, J., Gwalani, B., … Rohatgi, A. (2021). Metastable orientation relationships in thin film Cu-Cr bilayers. Scripta Materialia, 194, 113635. https://doi.org/10.1016/j.scriptamat.2020.113635

Oleksak, R. P., Addou, R., Gwalani, B., Baltrus, J. P., Liu, T., Diulus, J. T., … Doğan, Ö. N. (2021). Molecular-scale investigation of the oxidation behavior of chromia-forming alloys in high-temperature CO2. Npj Materials Degradation. https://doi.org/10.1038/s41529-021-00194-1

Escobar, J., Gwalani, B., Olszta, M., Silverstein, J., Overman, N., Bergmann, L., … Devaraj, A. (2021). Multimodal analysis of spatially heterogeneous microstructural refinement and softening mechanisms in three-pass friction stir processed Al-4Si alloy. Journal of Alloys and Compounds, 887, 161351. https://doi.org/10.1016/j.jallcom.2021.161351

Efe, M., Gwalani, B., Tao, J., Song, M., Kaspar, T. C., Devaraj, A., & Rohatgi, A. (2021). Nanomechanical scratching induced local shear deformation and microstructural evolution in single crystal copper. Applied Surface Science, 562, 150132. https://doi.org/10.1016/j.apsusc.2021.150132

Jagetia, A., Nartu, M. S. K. K. Y., Dasari, S., Sharma, A., Gwalani, B., & Banerjee, R. (2021). Ordering-mediated local nano-clustering results in unusually large Hall-Petch strengthening coefficients in high entropy alloys. Materials Research Letters, 9(5), 213–222. https://doi.org/10.1080/21663831.2020.1871440

Liu, T., Olszta, M., Gwalani, B., Park, C., Mathaudhu, S., & Devaraj, A. (2021). Phase transformations, microstructural refinement and defect evolution mechanisms in Al-Si alloys under non-hydrostatic diamond anvil cell compression. Materialia, 15, 101049.

Dasari, S., Sarkar, A., Sharma, A., Gwalani, B., Choudhuri, D., Soni, V., … Banerjee, R. (2021). Recovery of cold-worked Al0. 3CoCrFeNi complex concentrated alloy through twinning assisted B2 precipitation. Acta Materialia, 202, 448–462. https://doi.org/10.1016/j.actamat.2020.10.071

Wang, T., Li, X., Gwalani, B., & Komarasamy, M. (2021). Solid Phase Gradient Alloying Method via ShAPE. https://doi.org/10.2172/1988624

Gwalani, B., Song, M., Silverstein, J., Escobar, J., Wang, T., Pole, M., … Ross, K. A. (2021). Thermal Stability and Mechanical Properties of Cold-Sprayed Ni-Yttria Coating. https://doi.org/10.2139/ssrn.3897768

Dasari, S., Jagetia, A., Sharma, A., Nartu, M. S. K. K. Y., Soni, V., Gwalani, B., … Banerjee, R. (2021). Tuning the degree of chemical ordering in the solid solution of a complex concentrated alloy and its impact on mechanical properties. Acta Materialia, 212, 116938. https://doi.org/10.1016/j.actamat.2021.116938

Gwalani, B., Shukla, S., Leonard, D., Poplawsky, J. D., Pierce, D. T., Kovarik, L., … Devaraj, A. (2021). Understanding the microstructural stability in a γ′-strengthened Ni-Fe-Cr-Al-Ti alloy. Journal of Alloys and Compounds, 886, 161207. https://doi.org/10.1016/j.jallcom.2021.161207

Frank, M., Nene, S. S., Chen, Y., Gwalani, B., Kautz, E. J., Devaraj, A., … Mishra, R. S. (2020). Correlating work hardening with co-activation of stacking fault strengthening and transformation in a high entropy alloy using in-situ neutron diffraction. Scientific Reports, 10(1), 22263. https://doi.org/10.1038/s41598-020-79492-8

Gwalani, B., Dasari, S., Soni, V., Jagetia, A., Agrawal, P., shukla, S., … Banerjee, R. (2020, August 28). Deformation Twinning in a Metal-Intermetallic System: Novel Paradigm for Designing Alloys with Exceptional Strength-Ductility Combination (Vol. 8). Vol. 8. https://doi.org/10.31224/osf.io/95tn4

Hasannaeimi, V., Muskeri, S., Gwalani, B., Hofmann, D. C., & Mukherjee, S. (2020). Deformation behavior of metallic glass composites and plasticity accommodation at microstructural length-scales. Materials Today Communications, 24, 101237. https://doi.org/10.1016/j.mtcomm.2020.101237

Gwalani, B., Wang, T., Jagetia, A., Gangireddy, S., Muskeri, S., Mukherjee, S., … Mishra, R. S. (2020). Dynamic Shear Deformation of a Precipitation Hardened Al<sub>0.7</sub>CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry. Entropy, 22(4), 431. https://doi.org/10.3390/e22040431

Gwalani, B., Wang, T., Jagetia, A., Gangireddy, S., Muskeri, S., Mukherjee, S., … Mishra, R. S. (2020, March 10). Dynamic Shear Deformation of a Precipitation Hardened Al<sub>0.7</sub>CoCrFeNi Eutectic High-Entropy Alloy Using Hat-Shaped Specimen Geometry (Vol. 3). Vol. 3. https://doi.org/10.20944/preprints202003.0154.v1

Dasari, S., Jagetia, A., Chang, Y.-J., Soni, V., Gwalani, B., Gorsse, S., … Banerjee, R. (2020). Engineering multi-scale B2 precipitation in a heterogeneous FCC based microstructure to enhance the mechanical properties of a Al0. 5Co1. 5CrFeNi1. 5 high entropy alloy. Journal of Alloys and Compounds, 830, 154707. https://doi.org/10.1016/j.jallcom.2020.154707

Dasari, S., Jagetia, A., Soni, V., Gwalani, B., Gorsse, S., & Banerjee, R. (2020). Engineering transformation pathways in an Al0. 3CoFeNi complex concentrated alloy leads to excellent strength–ductility combination. Materials Research Letters, 8(11), 399–407. https://doi.org/10.1080/21663831.2020.1777215

Gwalani, B., Olszta, M., Varma, S., Li, L., Soulami, A., Kautz, E., … Devaraj, A. (2020). Extreme shear-deformation-induced modification of defect structures and hierarchical microstructure in an Al–Si alloy. Communications Materials, 1(1). https://doi.org/10.1038/s43246-020-00087-x

Dasari, S., Gwalani, B., Jagetia, A., Soni, V., Gorsse, S., & Banerjee, R. (2020). Hierarchical Eutectoid Nano-lamellar Decomposition in an Al 0.3 CoFeNi Complex Concentrated Alloy. Scientific Reports, 10, 4836. https://doi.org/10.1038/s41598-020-61538-6

Dasari, S., Chaudhary, V., Gwalani, B., Jagetia, A., Soni, V., Gorsse, S., … Banerjee, R. (2020). Highly tunable magnetic and mechanical properties in an Al0.3CoFeNi complex concentrated alloy. Materialia, 12, 100755. https://doi.org/10.1016/j.mtla.2020.100755

Chaudhary, V., Soni, V., Gwalani, B., Ramanujan, R. V., & Banerjee, R. (2020). Influence of non-magnetic Cu on enhancing the low temperature magnetic properties and Curie temperature of FeCoNiCrCu (x) high entropy alloys. Scripta Materialia, 182, 99–103. https://doi.org/10.1016/j.scriptamat.2020.02.037

Gwalani, B., Choudhuri, D., Liu, K., Lloyd, J. T., Mishra, R. S., & Banerjee, R. (2020). Interplay between single phase solid solution strengthening and multi-phase strengthening in the same high entropy alloy. Materials Science and Engineering: A, 771, 138620. https://doi.org/10.1016/j.msea.2019.138620

Wang, T., Gwalani, B., Silverstein, J., Darsell, J., Jana, S., Roosendaal, T., … Whalen, S. (2020). Microstructural Assessment of a Multiple-Intermetallic-Strengthened Aluminum Alloy Produced from Gas-Atomized Powder by Hot Extrusion and Friction Extrusion. Materials, 13(23), 5333. https://doi.org/10.3390/ma13235333

Soni, V., Gwalani, B., Alam, T., Dasari, S., Zheng, Y., Senkov, O. N., … Banerjee, R. (2020). Phase inversion in a two-phase, BCC+ B2, refractory high entropy alloy. Acta Materialia, 185, 89–97. https://doi.org/10.1016/j.actamat.2019.12.004

Soni, V., Senkov, O. N., Couzinie, J.-P., Zheng, Y., Gwalani, B., & Banerjee, R. (2020). Phase stability and microstructure evolution in a ductile refractory high entropy alloy Al10Nb15Ta5Ti30Zr40. Materialia, 9, 100569. https://doi.org/10.1016/j.mtla.2019.100569

Kautz, E. J., Gwalani, B., Lambeets, S. V. M., Kovarik, L., Schreiber, D. K., Perea, D. E., … Devaraj, A. (2020). Rapid assessment of structural and compositional changes during early stages of zirconium alloy oxidation. Npj Materials Degradation. https://doi.org/10.1038/s41529-020-00133-6

Dutt, A. K., Gwalani, B., Tungala, V., Carl, M., Mishra, R. S., Tamirisakandala, S. A., … Brennan, R. E. (2019). A novel nano-particle strengthened titanium alloy with exceptional specific strength. Scientific Reports, 9, 11726. https://doi.org/10.1038/s41598-019-48139-8

Gwalani, B., Salloom, R., Alam, T., Valentin, S. G., Zhou, X., Thompson, G., … Banerjee, R. (2019). Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys. Materials Research Letters, 7(7), 267–274. https://doi.org/10.1080/21663831.2019.1601644

Gwalani, B., Gangireddy, S., Shukla, S., Yannetta, C. J., Valentin, S. G., Mishra, R. S., & Banerjee, R. (2019). Compositionally graded high entropy alloy with a strong front and ductile back. Materials Today Communications, 20, 100602. https://doi.org/10.1016/j.mtcomm.2019.100602

Gangireddy, S., Gwalani, B., Soni, V., Banerjee, R., & Mishra, R. S. (2019). Contrasting mechanical behavior in precipitation hardenable AlXCoCrFeNi high entropy alloy microstructures: Single phase FCC vs. dual phase FCC-BCC. Materials Science and Engineering: A, 739, 158–166. https://doi.org/10.1016/j.msea.2018.10.021

Mantri, S. A., Sun, F., Choudhuri, D., Alam, T., Gwalani, B., Prima, F., & Banerjee, R. (2019). Deformation Induced Hierarchical Twinning Coupled with Omega Transformation in a Metastable β-Ti Alloy. Scientific Reports, 9, 1334. https://doi.org/10.1038/s41598-018-37865-0

Choudhuri, D., Shukla, S., Gwalani, B., Banerjee, R., & Mishra, R. S. (2019). Deformation induced intermediate metastable lattice structures facilitate ordered B2 nucleation in a fcc-based high entropy alloy. Materials Research Letters, 7(1), 40–46. https://doi.org/10.1080/21663831.2018.1553212

Wang, T., Gwalani, B., Shukla, S., Frank, M., & Mishra, R. S. (2019). Development of in situ composites via reactive friction stir processing of Ti–B4C system. Composites Part B: Engineering, 172, 54–60. https://doi.org/10.1016/j.compositesb.2019.05.067

Liu, K., Gwalani, B., Komarasamy, M., Shukla, S., Wang, T., & Mishra, R. S. (2019). Effect of nano-sized precipitates on the fatigue property of a lamellar structured high entropy alloy. Materials Science and Engineering: A, 760, 225–230. https://doi.org/10.1016/j.msea.2019.06.012

Wang, T., Shukla, S., Gwalani, B., Komarasamy, M., Reza-Nieto, L., & Mishra, R. S. (2019). Effect of reactive alloy elements on friction stir welded butt joints of metallurgically immiscible magnesium alloys and steel. Journal of Manufacturing Processes, 39, 138–145. https://doi.org/10.1016/j.jmapro.2019.02.009

Bantounas, I., Gwalani, B., Alam, T., Banerjee, R., & Dye, D. (2019). Elemental partitioning, mechanical and oxidation behaviour of two high-γ′ W-free γ/γ′ polycrystalline Co/Ni superalloys. Scripta Materialia, 163, 44–50. https://doi.org/10.1016/j.scriptamat.2018.12.025

Choudhuri, D., Gwalani, B., Gorsse, S., Komarasamy, M., Mantri, S. A., Srinivasan, S. G., … Banerjee, R. (2019). Enhancing strength and strain hardenability via deformation twinning in fcc-based high entropy alloys reinforced with intermetallic compounds. Acta Materialia, 165, 420–430. https://doi.org/10.1016/j.actamat.2018.12.010

Korir, D. K., Gwalani, B., Joseph, A., Kamras, B., Arvapally, R. K., Omary, M. A., & Marpu, S. B. (2019). Facile photochemical syntheses of conjoined nanotwin gold-silver particles within a biologically-benign chitosan polymer. Nanomaterials, 9(4), 596. https://doi.org/10.3390/nano9040596

Liu, K., Komarasamy, M., Gwalani, B., Shukla, S., & Mishra, R. S. (2019). Fatigue behavior of ultrafine grained triplex Al0.3CoCrFeNi high entropy alloy. Scripta Materialia, 158, 116–120. https://doi.org/10.1016/j.scriptamat.2018.08.048

Gangireddy, S., Gwalani, B., Banerjee, R., & Mishra, R. S. (2019). High Strain Rate Response of Al0.7CoCrFeNi High Entropy Alloy: Dynamic Strength Over 2 GPa from Thermomechanical Processing and Hierarchical Microstructure. Journal of Dynamic Behavior of Materials, 5(1), 1–7. https://doi.org/10.1007/s40870-018-00178-4

Sinha, S., Komarasamy, M., Thapliyal, S., Gwalani, B., Shukla, S., Darling, K. A., & Mishra, R. S. (2019). Immiscible nanostructured copper-aluminum-niobium alloy with excellent precipitation strengthening upon friction stir processing and aging. Scripta Materialia, 164, 42–47. https://doi.org/10.1016/j.scriptamat.2019.01.038

Gwalani, B., Gangireddy, S., Zheng, Y., Soni, V., Mishra, R. S., & Banerjee, R. (2019). Influence of ordered L1 2 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy. Scientific Reports, 9, 6371. https://doi.org/10.1038/s41598-019-42870-y

Gwalani, B., Soni, V., Waseem, O. A., Mantri, S. A., & Banerjee, R. (2019). Laser additive manufacturing of compositionally graded AlCrFeMoVx (x= 0 to 1) high-entropy alloy system. Optics & Laser Technology, 113, 330–337. https://doi.org/10.1016/j.optlastec.2019.01.009

Gangireddy, S., Gwalani, B., Liu, K., Faierson, E. J., & Mishra, R. S. (2019). Microstructure and mechanical behavior of an additive manufactured (AM) WE43-Mg alloy. Additive Manufacturing, 26, 53–64. https://doi.org/10.1016/j.addma.2018.12.015

Gwalani, B., Gorsse, S., Soni, V., Carl, M., Ley, N., Smith, J., … Banerjee, R. (2019). Role of copper on L12 precipitation strengthened fcc based high entropy alloy. Materialia, 6, 100282. https://doi.org/10.1016/j.mtla.2019.100282

Gwalani, H., Gwalani, B., O'Neill, M., Mikler, A. R., & Banerjee, R. (2019). Simulation of solute clusters in metallic systems. Modelling and Simulation in Materials Science and Engineering, 27(8), 085014. https://doi.org/10.1088/1361-651x/ab4b3d

Gwalani, B., Pohan, R. M., Waseem, O. A., Alam, T., Hong, S. H., Ryu, H. J., & Banerjee, R. (2019). Strengthening of Al0. 3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3. Scripta Materialia, 162, 477–481. https://doi.org/10.1016/j.scriptamat.2018.12.021

Gwalani, B., Gorsse, S., Choudhuri, D., Zheng, Y., Mishra, R. S., & Banerjee, R. (2019). Tensile yield strength of a single bulk Al0. 3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa. Scripta Materialia, 162, 18–23. https://doi.org/10.1016/j.scriptamat.2018.10.023

Chaudhary, V., Borkar, T., Mikler, C. V., Gwalani, B., Choudhuri, D., Soni, V., … Banerjee, R. (2018). Additively Manufactured Functionally Graded FeNi based High Entropy Magnetic Alloys. 2018 IEEE International Magnetics Conference (INTERMAG. Presented at the 2018 IEEE International Magnetics Conference (INTERMAG), Singapore.

Choudhuri, D., Shukla, S., Green, W. B., Gwalani, B., Ageh, V., Banerjee, R., & Mishra, R. S. (2018). Crystallographically degenerate B2 precipitation in a plastically deformed fcc-based complex concentrated alloy. Materials Research Letters, 6(3), 171–177. https://doi.org/10.1080/21663831.2018.1426649

Alam, T., Gwalani, B., Viswanathan, G., Fraser, H., & Banerjee, R. (2018). Detailed Investigation of Core?Shell Precipitates in a Cu-Containing High Entropy Alloy. JOM, 70(9), 1771–1775. https://doi.org/10.1007/s11837-018-2935-8

Gangireddy, S., Gwalani, B., & Mishra, R. S. (2018). Grain size dependence of strain rate sensitivity in a single phase FCC high entropy alloy Al0.3CoCrFeNi. Materials Science and Engineering: A, 736, 344–348. https://doi.org/10.1016/j.msea.2018.09.009

Shukla, S., Choudhuri, D., Wang, T., Liu, K., Wheeler, R., Williams, S., … Mishra, R. S. (2018). Hierarchical features infused heterogeneous grain structure for extraordinary strength-ductility synergy. Materials Research Letters, 6(12), 676–682. https://doi.org/10.1080/21663831.2018.1538023

Gwalani, B., Pohan, R. M., Lee, J., Lee, B., Banerjee, R., Ryu, H. J., & Hong, S. H. (2018). High-entropy alloy strengthened by in situ formation of entropy-stabilized nano-dispersoids. Scientific Reports, 8, 14085. https://doi.org/10.1038/s41598-018-32552-6

Chaudhary, V., Gwalani, B., Soni, V., Ramanujan, R. V., & Banerjee, R. (2018). Influence of Cr Substitution and Temperature on Hierarchical Phase Decomposition in the AlCoFeNi High Entropy Alloy. Scientific Reports, 8, 15578. https://doi.org/10.1038/s41598-018-33922-w

Soni, V., Senkov, O. N., Gwalani, B., Miracle, D. B., & Banerjee, R. (2018). Microstructural Design for Improving Ductility of An Initially Brittle Refractory High Entropy Alloy. Scientific Reports, 8(1). https://doi.org/10.1038/s41598-018-27144-3

Gangireddy, S., Kaimiao, L., Gwalani, B., & Mishra, R. (2018). Microstructural dependence of strain rate sensitivity in thermomechanically processed Al<inf>0.1</inf>CoCrFeNi high entropy alloy. Materials Science and Engineering A, 727, 148–159. https://doi.org/10.1016/j.msea.2018.04.108

Tungala, V., Arora, A., Gwalani, B., Mishra, R. S., Brennan, R. E., & Cho, K. C. (2018). Microstructure and mechanical properties of friction stir processed cast Eglin steel (ES-1). Materials Science and Engineering A, 709, 105–114. https://doi.org/10.1016/j.msea.2017.10.033

Gwalani, B., Ayyagari, A. V., Choudhuri, D., Scharf, T., Mukherjee, S., Gibson, M., & Banerjee, R. (2018). Microstructure and wear resistance of an intermetallic-based Al0.25Ti0.75CoCrFeNi high entropy alloy. Materials Chemistry and Physics, 210, 197–206. https://doi.org/10.1016/j.matchemphys.2017.06.034

Pohan, R. M., Gwalani, B., Lee, J., Alam, T., Hwang, J. Y., Ryu, H. J., … Hong, S. H. (2018). Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al<inf>0.3</inf>CoCrFeMnNi high entropy alloy. Materials Chemistry and Physics, 210, 62–70. https://doi.org/10.1016/j.matchemphys.2017.09.013

Gangireddy, S., Gwalani, B., Liu, K., Banerjee, R., & Mishra, R. S. (2018). Microstructures with extraordinary dynamic work hardening and strain rate sensitivity in Al<inf>0.3</inf>CoCrFeNi high entropy alloy. Materials Science and Engineering A, 734, 42–50. https://doi.org/10.1016/j.msea.2018.07.088

Gwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R. S., & Banerjee, R. (2018). Modifying transformation pathways in high entropy alloys or complex concentrated alloys via thermo-mechanical processing. Acta Materialia, 153, 169–185. https://doi.org/10.1016/j.actamat.2018.05.009

Soni, V., Gwalani, B., Senkov, O. N., Viswanathan, B., Alam, T., Miracle, D. B., & Banerjee, R. (2018). Phase stability as a function of temperature in a refractory high-entropy alloy. Journal of Materials Research, 1–12. https://doi.org/10.1557/jmr.2018.223

Ayyagari, A., Barthelemy, C., Gwalani, B., Banerjee, R., Scharf, T. W., & Mukherjee, S. (2018). Reciprocating sliding wear behavior of high entropy alloys in dry and marine environments. Materials Chemistry and Physics, 210, 162–169. https://doi.org/10.1016/j.matchemphys.2017.07.031

Ayyagari, A. V., Gwalani, B., Muskeri, S., Mukherjee, S., & Banerjee, R. (2018). Surface degradation mechanisms in precipitation-hardened high-entropy alloys. Npj Materials Degradation, 2, 33. https://doi.org/10.1038/s41529-018-0054-1

Kuang, W., Was, G. S., Miller, C., Kaufman, M., Alam, T., Gwalani, B., & Banerjee, R. (2018). The effect of cold rolling on grain boundary structure and stress corrosion cracking susceptibility of twins in alloy 690 in simulated PWR primary water environment. Corrosion Science, 130, 126–137. https://doi.org/10.1016/j.corsci.2017.11.002

Borkar, T., Chaudhary, V., Gwalani, B., Choudhuri, D., Mikler, C. V., Soni, V., … Banerjee, R. (2017). A Combinatorial Approach for Assessing the Magnetic Properties of High Entropy Alloys: Role of Cr in AlCo<inf>x</inf>Cr<inf>1?x</inf>FeNi. Advanced Engineering Materials, 19(8). https://doi.org/10.1002/adem.201700048

Choudhuri, D., Gwalani, B., Gorsse, S., Mikler, C. V., Ramanujan, R. V., Gibson, M. A., & Banerjee, R. (2017). Change in the primary solidification phase from fcc to bcc-based B2 in high entropy or complex concentrated alloys. Scripta Materialia, 127, 186–190. https://doi.org/10.1016/j.scriptamat.2016.09.023

Gwalani, B., Choudhuri, D., Soni, V., Ren, Y., Styles, M., Hwang, J. Y., … Banerjee, R. (2017). Cu assisted stabilization and nucleation of L1<inf>2</inf>precipitates in Al<inf>0.3</inf>CuFeCrNi<inf>2</inf>fcc-based high entropy alloy. Acta Materialia, 129, 170–182. https://doi.org/10.1016/j.actamat.2017.02.053

Patel, M. D., Cha, E., Kang, C., Gwalani, B., & Choi, W. (2017). High performance rechargeable Li-S batteries using binder-free large sulfur-loaded three-dimensional carbon nanotubes. Carbon, 118, 120–126. https://doi.org/10.1016/j.carbon.2017.03.035

Gwalani, B., Soni, V., Lee, M., Mantri, S. A., Ren, Y., & Banerjee, R. (2017). Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al<inf>0.3</inf>CoCrFeNi high entropy alloy. Materials and Design, 121, 254–260. https://doi.org/10.1016/j.matdes.2017.02.072

Hendrickson, M., Mantri, S. A., Ren, Y., Alam, T., Soni, V., Gwalani, B., … Banerjee, R. (2017). The evolution of microstructure and microhardness in a biomedical Ti?35Nb?7Zr?5Ta alloy. Journal of Materials Science, 52(6), 3062–3073. https://doi.org/10.1007/s10853-016-0591-3

Mikler, C. V., Chaudhary, V., Soni, V., Gwalani, B., Ramanujan, R. V., & Banerjee, R. (2017). Tuning the phase stability and magnetic properties of laser additively processed Fe-30at%Ni soft magnetic alloys. Materials Letters, 199, 88–92. https://doi.org/10.1016/j.matlet.2017.04.054

Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C. V., Yannetta, C. J., Chen, X., … Banerjee, R. (2016). A combinatorial assessment of Al<inf>x</inf>CrCuFeNi<inf>2</inf>(0 < x < 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties. Acta Materialia, 116, 63–76. https://doi.org/10.1016/j.actamat.2016.06.025

Gwalani, B., Alam, T., Miller, C., Rojhirunsakool, T., Kim, Y. S., Kim, S. S., … Banerjee, R. (2016). Experimental investigation of the ordering pathway in a Ni-33 at.%Cr alloy. Acta Materialia, 115, 372–384. https://doi.org/10.1016/j.actamat.2016.06.014

Borkar, T., Gwalani, B., Choudhuri, D., Alam, T., Mantri, A. S., Gibson, M. A., & Banerjee, R. (2016). Hierarchical multi-scale microstructural evolution in an as-cast Al<inf>2</inf>CuCrFeNi<inf>2</inf>complex concentrated alloy. Intermetallics, 71, 31–42. https://doi.org/10.1016/j.intermet.2015.12.013

Zhang, Y., Alam, T., Gwalani, B., Rong, W., Banerjee, R., Peng, L.-M., … Birbilis, N. (2016). On the role of Ag in enhanced age hardening kinetics of Mg?Gd?Ag?Zr alloys. Philosophical Magazine Letters, 96(6), 212–219. https://doi.org/10.1080/09500839.2016.1190040

Xia, C., Kang, C., Patel, M. D., Cai, L., Gwalani, B., Banerjee, R., … Choi, W. (2016). Pine Wood Extracted Activated Carbon through Self-Activation Process for High-Performance Lithium-Ion Battery. ChemistrySelect, 1(13), 4000–4007. https://doi.org/10.1002/slct.201600926

Gwalani, B., Soni, V., Choudhuri, D., Lee, M., Hwang, J. Y., Nam, S. J., … Banerjee, R. (2016). Stability of ordered L1<inf>2</inf>and B<inf>2</inf>precipitates in face centered cubic based high entropy alloys - Al<inf>0.3</inf>CoFeCrNi and Al<inf>0.3</inf>CuFeCrNi<inf>2</inf>. Scripta Materialia, 123, 130–134. https://doi.org/10.1016/j.scriptamat.2016.06.019

Kuang, W., Miller, C., Kaufman, M., Alam, T., Gwalani, B., Banerjee, R., & Was, G. S. (2015). Effects of cold work and aging treatments on the microstructure and stress corrosion cracking initiation behavior of solution annealed alloy 690. Proceedings of the 17th International Conference on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors.

Choudhuri, D., Alam, T., Borkar, T., Gwalani, B., Mantri, A. S., Srinivasan, S. G., … Banerjee, R. (2015). Formation of a Huesler-like L2<inf>1</inf>phase in a CoCrCuFeNiAlTi high-entropy alloy. Scripta Materialia, 100, 36–39. https://doi.org/10.1016/j.scriptamat.2014.12.006