Christopher Rock

Ives, L., Bui, T., Habermann, T., Collins, G., Marsden, D., Neilson, J., … Rock, C. (2023). 1.5 MW CW RF Loads for Gyrotrons. 21ST JOINT WORKSHOP ON ELECTRON CYCLOTRON EMISSION AND ELECTRON CYCLOTRON RESONANCE HEATING, EC21, Vol. 277. https://doi.org/10.1051/epjconf/202327704008

Zhang, H., Carriere, P. R., Amoako, E. D., Rock, C. D., Thielk, S. U., Fletcher, C. G., & Horn, T. J. (2023, August 30). Microstructure and Elevated Temperature Flexure Testing of Tungsten Produced by Electron Beam Additive Manufacturing. JOM, Vol. 8. https://doi.org/10.1007/s11837-023-06045-5

Ovalle, D. G., Rock, C., Winkler, C., Hartshorn, D., Barr, C., Cullom, T., … Horn, T. (2023). Microstructure development and properties of micro-alloyed copper, Cu-0.3Zr-0.15Ag, produced by electron beam additive manufacturing. Materials Characterization, 197, 112675. https://doi.org/10.1016/j.matchar.2023.112675

Saptarshi, S., DeJong, M., Rock, C., Anderson, I., Napolitano, R., Forrester, J., … Horn, T. (2022, August 2). Laser Powder Bed Fusion of ODS 14YWT from Gas Atomization Reaction Synthesis Precursor Powders. JOM, Vol. 8. https://doi.org/10.1007/s11837-022-05418-6

Horn, T., Rock, C., Kaoumi, D., Anderson, I., White, E., Prost, T., … Darsell, J. (2022). Laser powder bed fusion additive manufacturing of oxide dispersion strengthened steel using gas atomized reaction synthesis powder. MATERIALS & DESIGN, 216. https://doi.org/10.1016/j.matdes.2022.110574

Rock, C., Tarafder, P., Ives, L., & Horn, T. (2021). Characterization of copper & stainless steel interface produced by electron beam powder bed fusion. MATERIALS & DESIGN, 212. https://doi.org/10.1016/j.matdes.2021.110278

Hamilton, J. D., Ramesh, S., Harrysson, O. L. A., Rock, C. D., & Rivero, I. V. (2021). Cryogenic mechanical alloying of aluminum matrix composites for powder bed fusion additive manufacturing. JOURNAL OF COMPOSITE MATERIALS, 55(5), 641–651. https://doi.org/10.1177/0021998320957698

Hankwitz, J. P., Ledford, C., Rock, C., O'Dell, S., & Horn, T. J. (2021). Electron Beam Melting of Niobium Alloys from Blended Powders. MATERIALS, 14(19). https://doi.org/10.3390/ma14195536

Ellis, E. A. I., Sprayberry, M. A., Ledford, C., Hankwitz, J. P., Kirka, M. M., Rock, C. D., … Dehoff, R. R. (2021). Processing of tungsten through electron beam melting *. JOURNAL OF NUCLEAR MATERIALS, 555. https://doi.org/10.1016/j.jnucmat.2021.153041

Tarafder, P., Rock, C., & Horn, T. (2021). Quasi-Static Tensile Properties of Unalloyed Copper Produced by Electron Beam Powder Bed Fusion Additive Manufacturing. MATERIALS, 14(11). https://doi.org/10.3390/ma14112932

Rock, C., Ledford, C., Garcia-Avila, M., West, H., Miller, V. M., Pankow, M., … Horn, T. (2021). The Influence of Powder Reuse on the Properties of Nickel Super Alloy ATI 718 (TM) in Laser Powder Bed Fusion Additive Manufacturing. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 52(2), 676–688. https://doi.org/10.1007/s11663-020-02040-2

Rock, C., Lara-Curzio, E., Ellis, B., Ledford, C., Leonard, D. N., Kannan, R., … Horn, T. (2020). Additive Manufacturing of Pure Mo and Mo plus TiC MMC Alloy by Electron Beam Powder Bed Fusion. JOM, 72(12), 4202–4213. https://doi.org/10.1007/s11837-020-04442-8

Rock, C., Vadlakonda, R., Figurskey, S., Ledford, C., West, H., Miller, V., … Horn, T. (2020). Analysis of Self-Organized Patterned Surface Oxide Spots on Ejected Spatter Produced during Laser Powder Bed Fusion. Additive Manufacturing, 35, 101320. https://doi.org/10.1016/j.addma.2020.101320

Ledford, C., Rock, C., Tung, M., Wang, H., Schroth, J., & Horn, T. (2020). Evaluation of Electron Beam Powder Bed Fusion Additive Manufacturing of High Purity Copper for Overhang Structures Using In-Situ Real Time Backscatter Electron Monitoring. Procedia Manufacturing, 48, 828–838. https://doi.org/10.1016/j.promfg.2020.05.120

Ledford, C., Tung, M., Rock, C., & Horn, T. (2020). Real time monitoring of electron emissions during electron beam powder bed fusion for arbitrary geometries and toolpaths. ADDITIVE MANUFACTURING, 34. https://doi.org/10.1016/j.addma.2020.101365

Ledford, C., Rock, C., Carriere, P., Frigola, P., Gamzina, D., & Horn, T. (2019). Characteristics and Processing of Hydrogen-Treated Copper Powders for EB-PBF Additive Manufacturing. APPLIED SCIENCES-BASEL, 9(19). https://doi.org/10.3390/app9193993

White, E., Rinko, E., Prost, T., Horn, T., Ledford, C., Rock, C., & Anderson, I. (2019). Processing of Alnico Magnets by Additive Manufacturing. APPLIED SCIENCES-BASEL, 9(22). https://doi.org/10.3390/app9224843

Mahbooba, Z., Thorsson, L., Unosson, M., Skoglund, P., West, H., Horn, T., … Harrysson, O. (2018). Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness. APPLIED MATERIALS TODAY, 11, 264–269. https://doi.org/10.1016/j.apmt.2018.02.011

Rock, C., Qiu, J., & Okazaki, K. (1998). Electro-Discharge of Nanocrystalline Nb-Al Powders Produced by Mechanical Alloying. Journal of Materials Science, 33(1), 241–246. https://doi.org/10.1023/A:1004386822343

Qiu, J., Shibata, T., Rock, C., & Okazaki, K. (1997). Electro-Discharge Consolidation of Atomized High Strength Aluminum Powders. Materials Transactions, JIM, 38(3), 226–231. https://doi.org/10.2320/matertrans1989.38.226

Qiu, J., Rock, C., Shibata, T., & Okazaki, K. (1996). Mechanical Alloying of Al<sub>91</sub>Ni<sub>5</sub>Cu<sub>2</sub>Ti<sub>1.4</sub>Zr<sub>0.4</sub>Mm<sub>0.2</sub> Powders and Electro-Discharge Consolidation into Bulk. Materials Science Forum, 235-238, 273–278. https://doi.org/10.4028/www.scientific.net/MSF.235-238.273

Rock, C., & Okazaki, K. (1996). Phase Identification, Thermal Stability and Electro-Discharge Consolidation in a Mechanically Alloyed Nb-Al. In C. Suryanarayana, J. Singh, & F. H. Froes (Eds.), Processing and properties of nanocrystalline materials (p. 199). Warrendale, Pennsylvania: TMS.

Rock, C., & Okazaki, K. (1995). Detailed phase analysis of a 77 at.%Nb-Al system prepared by low-energy ball milling. Nanostructured Materials, 5(6), 643–656. https://doi.org/10.1016/0965-9773(95)00282-J

Rock, C., & Okazaki, K. (1995). Grain growth kinetics and thermal stability in a nanocrystalline multiphase mixture prepared by low-energy ball milling. Nanostructured Materials, 5(6), 657–671. https://doi.org/10.1016/0965-9773(95)00278-M

Rock, C., Pete, T., & Okazaki, K. (1993). Detailed Analysis of Phase Formation During Mechanical Alloying of Nb and Al. Proceedings of 1993 World Powder Metallurgy Congress, Japan Society of Powder and Powder Metallurgy, 1, 100.

Rock, C., & Okazaki, K. (1993). Mechanical Grinding of 6 mol% Y2O3-ZrO2. Proceedings of 1993 World Powder Metallurgy Congress, Japan Society of Powder and Powder Metallurgy, 1, 147.