Daniel Erique Saloni

A Multi-Criteria Approach for Quantifying the Impact of Global Megatrends on the Pulp and Paper Industry: Insights into Digitalization, Social Behavior Change, and Sustainability

LOGISTICS-BASEL, 8(2).

An economic analysis of bamboo plantations and feedstock delivered cost in the Southern US for the manufacturing of fiber-based bioproducts

Vivas, K. A., Vera, R. E., Phillips, R. B., Forfora, N., Azuaje, I., Zering, K., … Gonzalez, R. (2024, June 10). BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, Vol. 6.

Characterizing value-added pellets obtained from blends of miscanthus, corn stover, and switchgrass

RENEWABLE ENERGY, 227.

Co-pyrolysis of biomass and polyethylene terephthalate (PET) as an alternative for energy production from waste valorization

FUEL, 362.

Enhancing tool life through innovative process control in wood-based machining

Wood Material Science & Engineering.

Environmental Sustainability Analysis of Rotary-Screen Printing and Digital Textile Printing

Hoque, S. M. A., Chapman, L. P., Moore, M., Lavelle, J., Saloni, D., Woodbridge, J., & King, K. M. (2024, September 19). AATCC JOURNAL OF RESEARCH, Vol. 9.

Evaluating chemi-mechanical pulping processes of agricultural residues: High-yield pulps from wheat straw for fiber-based bioproducts

INDUSTRIAL CROPS AND PRODUCTS, 221.

From waste to advanced resource: Techno-economic and life cycle assessment behind the integration of polyester recycling and glucose production to valorize fast fashion garments

CHEMICAL ENGINEERING JOURNAL, 500.

Life focycle assessment of Brazilian bleached eucalyptus kraft pulp: Integrating bleaching processes and biogenic carbon impacts

CLEANER ENVIRONMENTAL SYSTEMS, 15.

Nth-plant scenario for blended pellets of Miscanthus, Switchgrass, and Corn Stover using multi-modal transportation: Biorefineries and depots in the contiguous US

BIOMASS & BIOENERGY, 183.

Prospects for the utilization of bio-oil-derived chemicals generated via co-pyrolysis of biomass and polyethylene terephthalate (PET)

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS, 183.

The potential of wood-based urban waste to generate bioenergy and increase the energetic sustainability

Andrade, C. R., Cupertino, G. F. M., Silva, alison M., Brito, J. O., Morais, W. W. C., Balboni, B. M., … Dias Jr, A. F. (2024, February 22). CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, Vol. 2.

Understanding the potential of bamboo fibers in the USA: A comprehensive techno-economic comparison of bamboo fiber production through mechanical and chemical processes

Vivas, K. A., Pifano, A., Vera, R. E., Urdaneta, F., Urdaneta, I., Forfora, N., … Gonzalez, R. (2024, June 26). BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, Vol. 6.

Volumetric and Energy Production Assessment of Wood in Managed Forest in the Brazilian Arid Biome

BIORESOURCES, 19(4).

A scalable high-porosity wood for sound absorption and thermal insulation

Nature Sustainability, 1.

Assessment of Feedstock Quality of Poplars (<i>Populus</i> L.) Using Selected Pellet-Quality Parameters

Ghezehei, S. B., & Saloni, D. (2023, December 22). BIOENERGY RESEARCH, Vol. 12.

Energy Performance of Different Charcoal Production Systems

ENERGIES, 16(21).

Environmental Life Cycle Assessment of Premium and Ultra Hygiene Tissue Products in the United States

BIORESOURCES, 18(2), 4006–4031.

From a Sustainability Perspective, Why Should Bioplastics Be Used for Additive Manufacturing?

Polymer Science, 4(4), 000594.

Irrigation in Jatropha curcas L. cultivation and its effect on biomass for bioenergy generation

Journal of Cleaner Production.

Is sugarcane-based polyethylene a good alternative to fight climate change?

Journal of Cleaner Production.

Photoluminous Response of Biocomposites Produced with Charcoal

Polymers.

Transforming non-wood feedstocks into dissolving pulp via organosolv pulping: An alternative strategy to boost the share of natural fibers in the textile industry.

JOURNAL OF CLEANER PRODUCTION, 429.

A Novel Approach to Charcoal Fine Waste: Sustainable Use as Filling of Polymeric Matrices

POLYMERS, 14(24).

A novel approach to charcoal fine waste: sustainable use as filling of polymeric matrices

[Preprint].

Rethinking the use of bio-based plastics to accelerate the decarbonization of our society

Resources, Conservation and Recycling, 186, 106593.

Tuning the Adhesive Properties of Soy Protein Wood Adhesives with Different Coadjutant Polymers, Nanocellulose and Lignin

Polymers, 13(12), 1972.

A Review of Sustainable Materials Used in Thermoplastic Extrusion and Powder Bed Melting Additive Manufacturing

Bioplastic Modified with Woodflour for Additive Manufacturing

Characterization of Selected Pyrolysis Products of Diseased Orange Wood

BIORESOURCES, 15(3), 7118–7126.

Thermal, Structural, and Mechanical Effects of Nanofibrillated Cellulose in Polylactic Acid Filaments for Additive Manufacturing

BIORESOURCES, 15(4), 7954–7964.

Investigation of Bioplastics for Additive Manufacturing

ADVANCES IN ADDITIVE MANUFACTURING, MODELING SYSTEMS AND 3D PROTOTYPING, Vol. 975, pp. 365–376.

Novel 3D printing filament composite using diatomaceous earth and polylactic acid for materials properties and cost improvement

COMPOSITES PART B-ENGINEERING, 177.

Design and Development of Biopolymers for Additive Manufacturing

Peer-Reviewed Proceedings of the 2018 Industrial and Systems Engineering, 330–335.

Design and Development of Logistics Models for Residential and Commercial Biomass Pellets for Heat and Power Generation in the U.S.

BioResources, 12(1).

Management system based on the measurement of temperature and humidity with prediction calculation of the durability of materials in the crawlspace of houses in the southern region of the USA

Tekhné, 20(2), 081–096.

Novel Adhesives from Soybean proteins and biopolymer blends

Poster presented at the Wood Composite Center Fall Meeting, Atlanta, GA.

Qualitative analysis of the extractives of orange wood

Wood and Fiber Science, 49(4), 407–412. https://wfs.swst.org/index.php/wfs/article/view/2599

Understanding the Machinability of MDF and HDF

Velarde, G., Saloni, D., & Kamke, F. (2017, October 23). Poster presented at the Wood Composite Center Fall Meeting, Atlanta, GA.

Design and development of a U.S. logistics model for residential and commercial biomass

Presented at the Sun Grant Regional Conference, Auburn, AL.

Fiber pretreatment in the production of cellulose nanofibrils

Presented at the 247th National Spring Meeting of the American-Chemical-Society (ACS), Dallas, TX.

Improving Housing Conditions from the Crawl Space up with a Monitoring and Control System

Housing and Society, 41(1), 53–69.

US biomass opportunities for value-added biomass exports based on the European Union renewable energy share targets

BioResources, 9(4), 7606–7621.

Analyses of Moisture and Volume Reduction as Means to Optimize Biomass Sourcing under the Scenarios of Disperse and Centralized Operations

Velarde, G., & Saloni, D. (2013, April). Poster presented at the International Biomass Conference and Expo, BBI International, Minneapolis, MN.

Biomass pretreatment and logistics

Velarde, G., & Saloni, D. (2013, May 6). Presented at the Wood Education and Resource Center, Princeton, WV.

Capacity, production, and consumption assessment of the U.S. south Atlantic wood pellet industry

BioResources, 8(4), 5908–5924.

Effect of composition and formulation variables in biomass flooding capacity by o/w microemulsions

Presented at the 245th National Spring Meeting of the American-Chemical-Society (ACS), New Orleans, LA.

Evaluation of O/W microemulsions to penetrate the capillary structure of woody biomass: interplay between composition and formulation in green processing

Green Chemistry, 15(12), 3377.

Improvement of Housing Conditions by Assessing and Remediating Moisture Problems in Wood Housing Structures

Velarde, G., Saloni, D., & Lemaster, R. (2013, March). Poster presented at the 8th Annual NC State University Graduate Student Research Symposium, Raleigh, NC.

Pellet logistics challenges and opportunities

Velarde, G., & Saloni, D. (2013, July). Presented at the Pellet Fuel Institute Annual Conference, Asheville, NC.

Solid fuels current and future trends

Saloni, D. (2013, May 6). Presented at the Biomass and Bioenergy Seminar, Wood Education and Resource Center, Princeton, WV.

Techno-financial analysis of pellet production in the US

Saloni, D. (2013, July). Presented at the Pellet Fuel Institute Annual Conference, Asheville, NC.

US opportunities for exporting biomass to Europe

Lacoa, U., & Saloni, D. (2013, May 6). Presented at the Biomass and Bioenergy Seminar, Wood Education and Resource Center, Princeton, WV.

Wood Pellets Market Trends in the U.S

Velarde, G., & Saloni, D. (2013, April). Presented at the South Atlantic Region, International Biomass Conference and Expo, Track 1: Pellets & Densified Biomass, BBI International, Minneapolis, MN.

Assessment of the most adequate pre-treatments and woody biomasses intended for co-firing in the U.S

Poster presented at the Sungrant National Conference, New Orleans, LA.

Assessment of the most adequate pre-treatments and woody biomasses intended for direct co-firing in the U.S

BioResources, 7(4), 4817–4842.

Capillary flooding of wood with microemulsions from Winsor I systems

JOURNAL OF COLLOID AND INTERFACE SCIENCE, 381, 171–179.

Fuel Properties and Suitability of E. benthamii and E. macarthurii for Torrefied Wood and Pellets

Pirraglia, A., Gonzalez, R., & Saloni, D. (2012, April). Presented at the International Biomass Conference and Expo, Denver, CO.

Fuel properties and suitability of eucalyptus benthamii and eucalyptus macarthurii for torrefied wood and pellets

BioResources, 7(1), 217–235.

Involvement, Empowerment and Team Building

Presented at the Wood Industry Week Seminar, Wood Education and Resource Center, Princeton, WA.

Lean Manufacturing Implementation Analysis in the Secondary Wood Industry

Presented at the Wood Industry Week Seminar, Wood Education and Resource Center, Princeton, WA.

Supply chain analysis and evaluation of manufacturing solid biofuels for the U.S. market

Saloni, D., Pirraglia, A., Denig, J., & Gonzalez, R. (2012, November). Presented at the SHPE National Conference, Fort Worth, TX.

Technical and Economic Modeling for the Production of Torrefied Ligno-Cellulosic Biomass for the U.S

Pirraglia, A., Gonzalez, R., & Saloni, D. (2012, April). Presented at the International Biomass Conference and Expo, Denver, CO.

Technical and Economic Modeling for the Production of Torrefied Lignocellulosic Biomass for the U.S. Densified Fuel Industry

BIOENERGY RESEARCH, 6(1), 263–275.

Technical and economic assessment for the production of torrefied ligno-cellulosic biomass pellets in the US

ENERGY CONVERSION AND MANAGEMENT, 66, 153–164.

Biomass to energy in the southern united states: supply chain and delivered cost

BioResources, 6(3), 2954–2976.

Cold-Resistant Eucalyptus: characteristics and suitability for solid fuels production

Presented at the Forest Productivity Cooperative Annual Meeting, Raleigh, NC.

Control system evaluation and implementation for the abrasive machining process on wood

BioResources, 6(3), 2763–2775.

Converting Eucalyptus Biomass into Ethanol

Presented at the IUFRO Working Group 2.08.03: Improvement and Culture of Eucalyptus, Porto Seguro, Brazil.

Design, Verification and Validation of a Model that Measures Environmental Image in Companies Implementing Green Building, by Means of Fuzzy Logic for Decision-making Purposes

Poster presented at the 6th International Conference on Industrial Ecology, Berkeley California.

Economics of cellulosic ethanol production: Green liquor pretreatment for softwood and hardwood, greenfield and repurpose scenarios

BioResources, 6(3), 2551–2567.

Evaluation of the Energy Balance for the Production of Briquettes from Biomass

FOREST PRODUCTS JOURNAL, 61(4), 302–309.

Global Wood Chip Demand

Presented at the Southern Resources Assessment Consortium Annual Meeting, Durham, NC.

Lean manufacturing in the U.S. South Atlantic region: An overview of the current state of implementation in the secondary wood industry

International Wood Products Journal, 2(1), 30–37.

Logistics and Transportation Analysis and Quantification of Forest Biomass from the U.S. to Europe. A Supply and Demand Interaction

Presented at the 6th International Conference on Industrial Ecology, Berkeley California.

Measuring environmental improvements image in companies implementing green manufacturing, by means of a fuzzy logic model for decision-making purposes

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 61(5-8), 703–711.

Thermo-mechanical pulping as a pretreatment for agricultural biomass for biochemical conversion

BioResources, 6(2), 1599–1614.

Tool Wear When Cutting Wood Fiber-Plastic Composite Materials

FOREST PRODUCTS JOURNAL, 61(2), 149–154.

A techno-economic analysis of wood pellets production

Poster presented at the Graduate Student Poster Competition, Society of Hispanic Professional Engineers Conference 2010, Cincinnati, OH.

Converting Eucalyptus biomass into ethanol: Financial and sensitivity analysis in a co-current dilute acid process. Part II

Biomass and Bioenergy, 35(2), 767–772.

Design, Development and validation of a model to evaluate the environmental image for manufacturing companies implementing Green Building

Presented at the SWST International Convention. Palais des Nations, Geneva, Switzerland.

Design, verification and validation of a model that measures environmental image in companies implementing Green Manufacturing, by means of fuzzy logic for decision-making purposes

Presented at the SHPE Conference, Cincinnati, OH.

Environmental Image Model for Companies Implementing Green Manufacturing, by Means of Fuzzy Logic for Decision-Making

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Mexico.

Exploring the potential of Eucalyptus for energy production in the Southern United States: Financial analysis of delivered biomass. Part I

BIOMASS & BIOENERGY, 35(2), 755–766.

Housing Elements Research Chamber: A new testing facility - a crawl space study

Poster presented at the Graduate Student Poster Competition, Society of Hispanic Professional Engineers Conference 2010, Cincinnati, OH.

Implementation analysis of lean manufacturing in the secondary wood industry in North Carolina

Journal of Forest Products and Business Research, 7(2).

Loblolly Pine for Biomass-Bioenergy: A Study of Delivery Cost and Simulation of Optimum Rotation Length and Stand Tree Density in Southern United States

Presented at the Biomass Conference, Minneapolis, Minnesota, USA.

Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process

SENSORS, 10(11), 10401–10412.

Sustainable Biofuels production: A supply chain and economic analysis

Presented at the AIChE Annual Meeting, Salt Lake City, UT.

Techno-economical analysis of wood pellets production for us manufacturers

BioResources, 5(4), 2374–2390.

The Business of Growing Eucalyptus for Biomass

Biomass Magazine.

Wood pellets: An Expanding Market Opportunity

Pirraglia, A., Gonzalez, R., Saloni, D., & Wright, J. (2010, July). Biomass Magazine.

Filling a Need: Forest Plantations for Bioenergy in the Southern US

Biomass Magazine, 8, 44–47.

Financial Analysis of Biomass Delivery Cost and Conversion into Ethanol in Southern United States

Poster presented at the Bioenergy 2009: Sustainable Bioenergy Business, Jyvaskyla, Finland.

Performance of woodfiber-plastic composites subjected to abrasive machining

Forest Products Journal, 59(6), 61–64.

Potential production and delivery cost of Eucalyptus for pulp and bio-refinery in Southern U.S

Presented at the International Biomass Conference, Portland, OR.

Process flow analysis and improvement on a modular home manufacturer using lean manufacturing tools and simulation techniques

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Miami, FL.

Process flow improvement proposal using lean manufacturing philosophy and simulation techniques on modular home manufacturer

Lean Construction Journal, 1(1), 77–93.

Process improvement on a modular home manufacturer by simulation techniques and lean manufacturing tools

Poster presented at the Society of Hispanic Professional Engineers Conference, Washington, DC.

Role of Bioenergy Plantations in Creating a Transportation Biofuel Industry

Southern Forest Economics Workers 2009 Annual Meeting Proceedings. Presented at the Southern Forest Economics Workers 2009 Annual Meeting, Chapel Hill, North Carolina, USA.

Role of bioenergy plantations in creating a transportation biofuel

Presented at the Southern Forest Economics Workers (SOFEW).

Status of lean manufacturing implementation on secondary wood industries including residential, cabinet, millwork, and panel markets

BioResources, 4(4), 1341–1358.

Thermo-Mechanical Pulping and Post-treatment of Agriculture Biomass for Ethanol Production: Developing More Efficient-Low Capital Intensive Process

Poster presented at the SHPE National Conference, Washington, DC.

Woody Biomass. Filling a need: Forest Plantations for Bioenergy in Southern U.S

Gonzalez, R., Wright, J., & Saloni, D. (2009, August). Biomass Magazine.

Worldwide Pulp and Paper Industry: facing the crisis

TAPPI Paper 360 Magazine.

Designing and implementing a quantitative methodology able to forecast the behavior of experimental data for abrasive machining

Presented at the SHPE Conference.

Designing and testing of a quantitative methodology capable of forecast the behavior of experimental data sanding and cleaning of the sanding belts for abrasive machining

Presented at the Forest Product Society, 62nd International Convention, St. Louis, Missouri.

Implementation of lean manufacturing in the secondary wood industry

Presented at the Operational Excellence Conference, Institute of Industrial Engineers, Minneapolis, MN.

South America: Industrial roundwood supply potential

BioResources, 3(1), 255–269.

South America: Industrial roundwood supply potential

Presented at the Forest Product Society, 62nd International Convention, St. Louis, Missouri.

The market of pulp and paper in Venezuela

TAPPI Paper 360 Magazine.

Timberland ownership shifts and forest management intensity in Southern U.S

Presented at the Southern Forest Resource Assessment Consortium (SOFAC).

Design and development of a process monitoring and control system for abrasive machining processes

Presented at the International Wood machining Seminar, Vancouver, CA.

Process monitoring of the abrasive machining process when wood is used

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Nashville, TN.

Simulation model design as a tool for improving abrasive machining process

Presented at the Institute of Industrial Engineers Solutions Conference. Institute of Industrial Engineers, Nashville, TN.

Abrasive cleaning analysis when thermal-shock techniques are used

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Orlando, FL.

Abrasive loading prevention by controlling temperature using thermal-shock techniques

Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Orlando, FL.

Analisis de la implementacion de la manufactura esbelta en la industria maderera

Presented at the Solutions Conference / Latin American Track. Institute of Industrial Engineers, Orlando, FL.

Abrasive machining process characterization on material removal rate, final surface texture, and power consumption for wood

Forest Products Journal, 55(12), 35–41.

Influence of woodfiber-plastic material composition on machining and abrasion performance

Presented at the Sixth International Conference on wood-fiber plastic composites, Madison, WI.

Lean Manufacturing potential in the American Wood Industry

Presented at the 5th Annual Lean Management Solutions. Institute of Industrial Engineers, Orlando, FL.

Lean manufacturing system and implementation analysis in the North Carolina wood industry

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

Machining and abrasion performance of woodfiber plastic composites

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

Preliminary research on Caribbean pine subjected to secondary machining process

Poster presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

Preliminary research on cleaning characterization on abrasive machining process when wood is used

Presented at the Industrial Engineering Research Conference, Atlanta, GA.

Process monitoring applications on abrasive belt loading

Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, CA.

Abrasive machining process characterization on power consumption when wood is used

Presented at the Industrial Engineering Research Conference, Houston, TX.

Fuzzy knowledge-based modeling and statistical regression in abrasive wood machining

Forest Products Journal, 54(5), 66–72.

Update of abrasive machining research for processing wood products

Presented at the 1st Annual Manufacturing Technology Summit Conference, Society of Manufacturing Engineers, Dearborn, MI.

Comparison between different geometric shapes of engineered abrasives on material removal and surface quality

Presented at the Industrial Engineering Research Conference, Portland, OR.

Woodfiber-Plastic Composites Machining Characteristics

Presented at the 14th The International Conference on Composite Materials, Society of Manufacturing Engineers, San Diego, CA.

Traditional versus engineered abrasives on material removal and surface quality

Presented at the Industrial Engineering Research Conference, Orlando, FL.

Characterization of Material Properties of Woodfiber-Plastic Composites Exposed to Secondary Manufacturing Processes

Proceedings of the Sixth International Conference on Woodfiber-Plastic Composites, 239–247.

Update of Process Monitoring and Control Research at NC State University

Proceedings of the 15th International Wood Machining Seminar, 511–522.

Wood fiber-plastic composites: machining and surface quality

Proceedings of the 15th International Wood Machining Seminar, 403–417.