Daniel Saloni

Vivas, K. A., Vera, R. E., Dasmohapatra, S., Marquez, R., Schoubroeck, S. V., Forfora, N., … Gonzalez, R. (2024). A Multi-Criteria Approach for Quantifying the Impact of Global Megatrends on the Pulp and Paper Industry: Insights into Digitalization, Social Behavior Change, and Sustainability. Logistics. https://doi.org/10.3390/logistics8020036

Cupertino, G. F. M., Silva, A. M., Pereira, A. K. S., Delatorre, F. M., Ucella-Filho, J. G. M., Souza, E. C., … Junior, A. F. (2024). Co-pyrolysis of biomass and polyethylene terephthalate (PET) as an alternative for energy production from waste valorization. FUEL, 362. https://doi.org/10.1016/j.fuel.2023.130761

Hossain, T., Jones, D. S., Godfrey, E., III, Saloni, D., Sharara, M., & Hartley, D. S. (2024). Nth-plant scenario for blended pellets of Miscanthus, Switchgrass, and Corn Stover using multi-modal transportation: Biorefineries and depots in the contiguous U.S. Biomass and Bioenergy, 183, 107162. https://doi.org/10.1016/j.biombioe.2024.107162

Andrade, C. R., Cupertino, G. F. M., Silva, alison M., Brito, J. O., Morais, W. W. C., Balboni, B. M., … Dias Jr, A. F. (2024, February 22). The potential of wood-based urban waste to generate bioenergy and increase the energetic sustainability. CLEAN TECHNOLOGIES AND ENVIRONMENTAL POLICY, Vol. 2. https://doi.org/10.1007/s10098-024-02775-5

Zhao, X., Liu, Y., Zhao, L., Yazdkhasti, A., Mao, Y., Siciliano, A., … Hu, L. (2023). A scalable high-porosity wood for sound absorption and thermal insulation. Nature Sustainability, 1. https://doi.org/10.1038/s41893-022-01035-y

Ghezehei, S. B., & Saloni, D. (2023, December 22). Assessment of Feedstock Quality of Poplars (<i>Populus</i> L.) Using Selected Pellet-Quality Parameters. BIOENERGY RESEARCH, Vol. 12. https://doi.org/10.1007/s12155-023-10711-6

Bernardes, F. F., Romanelli, T. L., Pereira, A. K. S., Cupertino, G. F. M., Fernandes, M. A., Brito, J. O., … Ryu, C. (2023). Energy Performance of Different Charcoal Production Systems. ENERGIES, 16(21). https://doi.org/10.3390/en16217318

Brito, A., Suarez, A., Pifano, A., Reisinger, L., Wright, J., Saloni, D., … Jameel, H. (2023). Environmental Life Cycle Assessment of Premium and Ultra Hygiene Tissue Products in the United States. BIORESOURCES, 18(2), 4006–4031. https://doi.org/10.15376/biores.18.2.4006-4031

Vivas, K., Gonzalez, R., & Saloni, D. (2023). From a Sustainability Perspective, Why Should Bioplastics Be Used for Additive Manufacturing? Polymer Science, 4(4), 000594. https://doi.org/10.31031/PSPRJ.2023.04.000594

Cezario, L. F. C., Júnior, A. F. D., Silva, Á. M., Santos, O. N. A., Ucella-Filho, J. G. M., Paula Protásio, T., … Rousset, P. (2023). Irrigation in Jatropha curcas L. cultivation and its effect on biomass for bioenergy generation. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2023.139527

Suarez, A., Ford, E., Venditti, R., Kelley, S., Saloni, D., & Gonzalez, R. (2023). Is sugarcane-based polyethylene a good alternative to fight climate change? Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2023.136432

Delatorre, F. M., Cupertino, G. F. M., Pereira, A. K. S., Souza, E. C., Silva, Á. M., Filho, J. G. M. U., … Júnior, A. F. D. (2023). Photoluminous Response of Biocomposites Produced with Charcoal. Polymers. https://doi.org/10.3390/polym15183788

Vera, R. E., Vivas, K. A., Urdaneta, F., Franco, J., Sun, R., Forfora, N., … Gonzalez, R. (2023). Transforming non-wood feedstocks into dissolving pulp via organosolv pulping: An alternative strategy to boost the share of natural fibers in the textile industry. JOURNAL OF CLEANER PRODUCTION, 429. https://doi.org/10.1016/j.jclepro.2023.139394

Delatorre, F. M., Mayrinck Cupertino, G. F., Oliveira, M. P., Gomes, F. da S., Roberto Profeti, L. P., Profeti, D., … Dias Junior, A. F. (2022). A Novel Approach to Charcoal Fine Waste: Sustainable Use as Filling of Polymeric Matrices. POLYMERS, 14(24). https://doi.org/10.3390/polym14245525

Delatorre, M., Cupertino, G. F. M., Oliveira, M. P., Silva Gomes, F., Profeti, L. P. R., Profeti, D., … Dias, A. F. (2022). A novel approach to charcoal fine waste: sustainable use as filling of polymeric matrices [Preprint]. https://doi.org/10.21203/rs.3.rs-1211983/v1

Suarez, A., Ford, E., Venditti, R., Kelley, S., Saloni, D., & Gonzalez, R. (2022). Rethinking the use of bio-based plastics to accelerate the decarbonization of our society. Resources, Conservation and Recycling, 186, 106593. https://doi.org/10.1016/j.resconrec.2022.106593

Podlena, M., Böhm, M., Saloni, D., Velarde, G., & Salas, C. (2021). Tuning the Adhesive Properties of Soy Protein Wood Adhesives with Different Coadjutant Polymers, Nanocellulose and Lignin. Polymers, 13(12), 1972. https://doi.org/10.3390/polym13121972

Mervine, N., Brӓtt, K., & Saloni, D. (2020). A Review of Sustainable Materials Used in Thermoplastic Extrusion and Powder Bed Melting Additive Manufacturing. https://doi.org/10.1007/978-3-030-51981-0_12

McLaughlin, K., Webb, A., Brӓtt, K., & Saloni, D. (2020). Bioplastic Modified with Woodflour for Additive Manufacturing. https://doi.org/10.1007/978-3-030-51981-0_11

Kravetz, C., Leca, C., Brito, J. O., Saloni, D., & Tilotta, D. C. (2020). Characterization of Selected Pyrolysis Products of Diseased Orange Wood. BIORESOURCES, 15(3), 7118–7126. https://doi.org/10.15376/biores.15.3.7118-7126

Saloni, D., & Mervine, N. (2020). Investigation of Bioplastics for Additive Manufacturing. ADVANCES IN ADDITIVE MANUFACTURING, MODELING SYSTEMS AND 3D PROTOTYPING, Vol. 975, pp. 365–376. https://doi.org/10.1007/978-3-030-20216-3_34

Gomez-Maldonado, D., Peresin, M. S., Verdi, C., Velarde, G., & Saloni, D. (2020). Thermal, Structural, and Mechanical Effects of Nanofibrillated Cellulose in Polylactic Acid Filaments for Additive Manufacturing. BIORESOURCES, 15(4), 7954–7964. https://doi.org/10.15376/biores.15.4.7954-7964

Aggarwal, S., Johnson, S., Saloni, D., & Hakovirta, M. (2019). Novel 3D printing filament composite using diatomaceous earth and polylactic acid for materials properties and cost improvement. COMPOSITES PART B-ENGINEERING, 177. https://doi.org/10.1016/j.compositesb.2019.107310

Saloni, D., Mervine, N., & Verdi, C. (2018). Design and Development of Biopolymers for Additive Manufacturing. Peer-Reviewed Proceedings of the 2018 Industrial and Systems Engineering, 330–335.

Lacoa, U., Velarde, G., Kay, M., Blanco, E., & Saloni, D. E. (2017). Design and Development of Logistics Models for Residential and Commercial Biomass Pellets for Heat and Power Generation in the U.S. BioResources, 12(1). https://doi.org/10.15376/biores.12.1.1506-1531

Saloni, D., Díaz, A., Fajardo, E., Cante, B., & Velarde, G. (2017). Management system based on the measurement of temperature and humidity with prediction calculation of the durability of materials in the crawlspace of houses in the southern region of the USA. Tekhné, 20(2), 081–096.

Saloni, D., Salas, C., & Velarde, G. (2017). Novel Adhesives from Soybean proteins and biopolymer blends. Poster presented at the Wood Composite Center Fall Meeting, Atlanta, GA.

Kravetz, C., Brito, J. O., Saloni, D., & Tilotta, D. C. (2017). Qualitative analysis of the extractives of orange wood. Wood and Fiber Science, 49(4), 407–412. Retrieved from https://wfs.swst.org/index.php/wfs/article/view/2599

Velarde, G., Saloni, D., & Kamke, F. (2017, October 23). Understanding the Machinability of MDF and HDF. Poster presented at the Wood Composite Center Fall Meeting, Atlanta, GA.

Velarde, G., Lacoa, U., & Saloni, D. (2015). Design and development of a U.S. logistics model for residential and commercial biomass. Presented at the Sun Grant Regional Conference, Auburn, AL.

Carrillo, C., Saloni, D., & Rojas, O. (2014). Fiber pretreatment in the production of cellulose nanofibrils. Presented at the 247th National Spring Meeting of the American-Chemical-Society (ACS), Dallas, TX.

Velarde, G. J., Saloni, D. E., Lemaster, R. L., & Jackson, S. D. (2014). Improving Housing Conditions from the Crawl Space up with a Monitoring and Control System. Housing and Society, 41(1), 53–69. https://doi.org/10.1080/08882746.2014.11430621

Lacoa, U., Velarde, G. J., & Saloni, D. (2014). US biomass opportunities for value-added biomass exports based on the European Union renewable energy share targets. BioResources, 9(4), 7606–7621. https://doi.org/10.15376/biores.9.4.7606-7621

Velarde, G., & Saloni, D. (2013, April). Analyses of Moisture and Volume Reduction as Means to Optimize Biomass Sourcing under the Scenarios of Disperse and Centralized Operations. Poster presented at the International Biomass Conference and Expo, BBI International, Minneapolis, MN.

Velarde, G., & Saloni, D. (2013, May 6). Biomass pretreatment and logistics. Presented at the Wood Education and Resource Center, Princeton, WV.

Velarde, G. J., Pirraglia, A., & Saloni, D. (2013). Capacity, production, and consumption assessment of the U.S. south Atlantic wood pellet industry. BioResources, 8(4), 5908–5924. https://doi.org/10.15376/biores.8.4.5908-5924

Carrillo, C., Saloni, D., & Rojas, O. (2013). Effect of composition and formulation variables in biomass flooding capacity by o/w microemulsions. Presented at the 245th National Spring Meeting of the American-Chemical-Society (ACS), New Orleans, LA.

Carrillo, C. A., Saloni, D., & Rojas, O. J. (2013). Evaluation of O/W microemulsions to penetrate the capillary structure of woody biomass: interplay between composition and formulation in green processing. Green Chemistry, 15(12), 3377. https://doi.org/10.1039/c3gc41325j

Velarde, G., Saloni, D., & Lemaster, R. (2013, March). Improvement of Housing Conditions by Assessing and Remediating Moisture Problems in Wood Housing Structures. Poster presented at the 8th Annual NC State University Graduate Student Research Symposium, Raleigh, NC.

Velarde, G., & Saloni, D. (2013, July). Pellet logistics challenges and opportunities. Presented at the Pellet Fuel Institute Annual Conference, Asheville, NC.

Saloni, D. (2013, May 6). Solid fuels current and future trends. Presented at the Biomass and Bioenergy Seminar, Wood Education and Resource Center, Princeton, WV.

Pirraglia, A., Gonzalez, R., Denig, J., & Saloni, D. (2013). Technical and Economic Modeling for the Production of Torrefied Lignocellulosic Biomass for the U.S. Densified Fuel Industry. BIOENERGY RESEARCH, 6(1), 263–275. https://doi.org/10.1007/s12155-012-9255-6

Pirraglia, A., Gonzalez, R., Saloni, D., & Denig, J. (2013). Technical and economic assessment for the production of torrefied ligno-cellulosic biomass pellets in the US. ENERGY CONVERSION AND MANAGEMENT, 66, 153–164. https://doi.org/10.1016/j.enconman.2012.09.024

Saloni, D. (2013, July). Techno-financial analysis of pellet production in the US. Presented at the Pellet Fuel Institute Annual Conference, Asheville, NC.

Lacoa, U., & Saloni, D. (2013, May 6). US opportunities for exporting biomass to Europe. Presented at the Biomass and Bioenergy Seminar, Wood Education and Resource Center, Princeton, WV.

Velarde, G., & Saloni, D. (2013, April). Wood Pellets Market Trends in the U.S. Presented at the South Atlantic Region, International Biomass Conference and Expo,  Track 1: Pellets & Densified Biomass, BBI International, Minneapolis, MN.

Saloni, D., Pirraglia, A., Gonzalez, R., Denig, J., & Wright, J. (2012). Assessment of the most adequate pre-treatments and woody biomasses intended for co-firing in the U.S. Poster presented at the Sungrant National Conference, New Orleans, LA.

Pirraglia, A., Gonzalez, R., Denig, J., Saloni, D., & Wright, J. (2012). Assessment of the most adequate pre-treatments and woody biomasses intended for direct co-firing in the U.S. BioResources, 7(4), 4817–4842. https://doi.org/10.15376/biores.7.4.4817-4842

Carrillo, C. A., Saloni, D., Lucia, L. A., Hubbe, M. A., & Rojas, O. J. (2012). Capillary flooding of wood with microemulsions from Winsor I systems. JOURNAL OF COLLOID AND INTERFACE SCIENCE, 381, 171–179. https://doi.org/10.1016/j.jcis.2012.05.032

Pirraglia, A., Gonzalez, R., & Saloni, D. (2012, April). Fuel Properties and Suitability of E. benthamii and E. macarthurii for Torrefied Wood and Pellets. Presented at the International Biomass Conference and Expo, Denver, CO.

Pirraglia, A., Gonzalez, R., Saloni, D., Wright, J., & Denig, J. (2012). Fuel properties and suitability of eucalyptus benthamii and eucalyptus macarthurii for torrefied wood and pellets. BioResources, 7(1), 217–235.

Saloni, D. (2012). Involvement, Empowerment and Team Building. Presented at the Wood Industry Week Seminar, Wood Education and Resource Center, Princeton, WA.

Saloni, D. (2012). Lean Manufacturing Implementation Analysis in the Secondary Wood Industry. Presented at the Wood Industry Week Seminar, Wood Education and Resource Center, Princeton, WA.

Pirraglia, A., & Saloni, D. E. (2012). Measuring environmental improvements image in companies implementing green manufacturing, by means of a fuzzy logic model for decision-making purposes. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 61(5-8), 703–711. https://doi.org/10.1007/s00170-011-3748-x

Saloni, D., Pirraglia, A., Denig, J., & Gonzalez, R. (2012, November). Supply chain analysis and evaluation of manufacturing solid biofuels for the U.S. market. Presented at the SHPE National Conference, Fort Worth, TX.

Pirraglia, A., Gonzalez, R., & Saloni, D. (2012, April). Technical and Economic Modeling for the Production of Torrefied Ligno-Cellulosic Biomass for the U.S. Presented at the International Biomass Conference and Expo, Denver, CO.

Gonzalez, R., Phillips, R., Saloni, D., Jameel, H., Abt, R., Pirraglia, A., & Wright, J. (2011). Biomass to energy in the southern united states: supply chain and delivered cost. BioResources, 6(3), 2954–2976.

Saloni, D., Pirraglia, A., Gonzalez, R., Wright, J., & Johnson, J. (2011). Cold-Resistant Eucalyptus: characteristics and suitability for solid fuels production. Presented at the Forest Productivity Cooperative Annual Meeting, Raleigh, NC.

Saloni, D. E., Lemaster, R., & Jackson, S. (2011). Control system evaluation and implementation for the abrasive machining process on wood. BioResources, 6(3), 2763–2775.

Saloni, D., Pirraglia, A., & Gonzalez, R. (2011). Converting Eucalyptus Biomass into Ethanol. Presented at the IUFRO Working Group 2.08.03: Improvement and Culture of Eucalyptus, Porto Seguro, Brazil.

Gonzalez, R., Treasure, T., Phillips, R., Jameel, H., Saloni, D., Abt, R., & Wright, J. (2011). Converting Eucalyptus biomass into ethanol: Financial and sensitivity analysis in a co-current dilute acid process. Part II. Biomass and Bioenergy, 35(2), 767–772. https://doi.org/10.1016/j.biombioe.2010.10.025

Pirraglia, A., Velarde, G., & Saloni, D. (2011). Design, Verification and Validation of a Model that Measures Environmental Image in Companies Implementing Green Building, by Means of Fuzzy Logic for Decision-making Purposes. Poster presented at the 6th International Conference on Industrial Ecology, Berkeley California.

Gonzalez, R., Treasure, T., Phillips, R., Jameel, H., & Saloni, D. (2011). Economics of cellulosic ethanol production: Green liquor pretreatment for softwood and hardwood, greenfield and repurpose scenarios. BioResources, 6(3), 2551–2567.

Arrieche, R., Saloni, D., Dyk, H., & Lemaster, R. L. (2011). Evaluation of the Energy Balance for the Production of Briquettes from Biomass. FOREST PRODUCTS JOURNAL, 61(4), 302–309. https://doi.org/10.13073/0015-7473-61.4.302

Gonzalez, R., Treasure, T., Wright, J., Saloni, D., Phillips, R., Abt, R., & Jameel, H. (2011). Exploring the potential of Eucalyptus for energy production in the Southern United States: Financial analysis of delivered biomass. Part I. BIOMASS & BIOENERGY, 35(2), 755–766. https://doi.org/10.1016/j.biombioe.2010.10.011

Saloni, D., & Pirraglia, A. (2011). Global Wood Chip Demand. Presented at the Southern Resources Assessment Consortium Annual Meeting, Durham, NC.

Velarde, G., Pirraglia, A., van Dyk, H., & Saloni, D. (2011). Lean manufacturing in the U.S. South Atlantic region: An overview of the current state of implementation in the secondary wood industry. International Wood Products Journal, 2(1), 30–37. https://doi.org/10.1179/2042645311Y.0000000006

Velarde, G. J., Pirraglia, A., & Saloni, D. E. (2011). Logistics and Transportation Analysis and Quantification of Forest Biomass from the U.S. to Europe. A Supply and Demand Interaction. Presented at the 6th International Conference on Industrial Ecology, Berkeley California.

Gonzalez, R., Jameel, H., Chang, H. M., Treasure, T., Pirraglia, A., & Saloni, D. (2011). Thermo-mechanical pulping as a pretreatment for agricultural biomass for biochemical conversion. BioResources, 6(2), 1599–1614.

Saloni, D., Buehlmann, U., & Lemaster, R. L. (2011). Tool Wear When Cutting Wood Fiber-Plastic Composite Materials. FOREST PRODUCTS JOURNAL, 61(2), 149–154. https://doi.org/10.13073/0015-7473-61.2.149

Pirraglia, A., Gonzalez, R., & Saloni, D. (2010). A techno-economic analysis of wood pellets production. Poster presented at the Graduate Student Poster Competition, Society of Hispanic Professional Engineers Conference 2010, Cincinnati, OH.

Pirraglia, A., & Saloni, D. (2010). Design, Development and validation of a model to evaluate the environmental image for manufacturing companies implementing Green Building. Presented at the SWST International Convention. Palais des Nations, Geneva, Switzerland.

Pirraglia, A., & Saloni, D. (2010). Design, verification and validation of a model that measures environmental image in companies implementing Green Manufacturing, by means of fuzzy logic for decision-making purposes. Presented at the SHPE Conference, Cincinnati, OH.

Pirraglia, A., & Saloni, D. (2010). Environmental Image Model for Companies Implementing Green Manufacturing, by Means of Fuzzy Logic for Decision-Making. Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Mexico.

Velarde, G. J., Saloni, D. E., & Lemaster, R. L. (2010). Housing Elements Research Chamber: A new testing facility - a crawl space study. Poster presented at the Graduate Student Poster Competition, Society of Hispanic Professional Engineers Conference 2010, Cincinnati, OH.

Pirraglia, A., Saloni, D., Lemaster, R., & van Dyk, H. (2010). Implementation analysis of lean manufacturing in the secondary wood industry in North Carolina. Journal of Forest Products and Business Research, 7(2).

Gonzalez, R., Saloni, D., Phillips, R., & Wright, J. (2010). Loblolly Pine for Biomass-Bioenergy: A Study of Delivery Cost and Simulation of Optimum Rotation Length and Stand Tree Density in Southern United States. Presented at the Biomass Conference, Minneapolis, Minnesota, USA.

Saloni, D. E., Lemaster, R. L., & Jackson, S. D. (2010). Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process. SENSORS, 10(11), 10401–10412. https://doi.org/10.3390/s101110401

Gonzalez, R., Saloni, D., Phillips, R., Jameel, H., & Kelley, S. (2010). Sustainable Biofuels production: A supply chain and economic analysis. Presented at the AIChE Annual Meeting, Salt Lake City, UT.

Pirraglia, A., Gonzalez, R., & Saloni, D. (2010). Techno-economical analysis of wood pellets production for us manufacturers. BioResources, 5(4), 2374–2390.

Gonzalez, R., Wright, J., Saloni, D., Phillips, R., Jameel, H., & Kelley, S. (2010). The Business of Growing Eucalyptus for Biomass. Biomass Magazine.

Pirraglia, A., Gonzalez, R., Saloni, D., & Wright, J. (2010, July). Wood pellets: An Expanding Market Opportunity. Biomass Magazine.

Gonzalez, R., Wright, J., & Saloni, D. (2009). Filling a Need: Forest Plantations for Bioenergy in the Southern US. Biomass Magazine, 8, 44–47.

Gonzalez, R., Phillips, R., Saloni, D., Jameel, H., & Kelley, S. (2009). Financial Analysis of Biomass Delivery Cost and Conversion into Ethanol in Southern United States. Poster presented at the Bioenergy 2009: Sustainable Bioenergy Business, Jyvaskyla, Finland.

Buehlmann, U., Saloni, D., & Lemaster, R. L. (2009). Performance of woodfiber-plastic composites subjected to abrasive machining. Forest Products Journal, 59(6), 61–64.

Gonzalez, R., Saloni, D., Phillips, R., & Wright, J. (2009). Potential production and delivery cost of Eucalyptus for pulp and bio-refinery in Southern U.S. Presented at the International Biomass Conference, Portland, OR.

Velarde, G., Saloni, D., & Giunta, M. (2009). Process flow analysis and improvement on a modular home manufacturer using lean manufacturing tools and simulation techniques. Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Miami, FL.

Velarde, G., Saloni, D., van Dyk, H., & Giunta, M. (2009). Process flow improvement proposal using lean manufacturing philosophy and simulation techniques on modular home manufacturer. Lean Construction Journal, 1(1), 77–93.

Velarde, G., Saloni, D., van Dyk, H., & Giunta, M. (2009). Process improvement on a modular home manufacturer by simulation techniques and lean manufacturing tools. Poster presented at the Society of Hispanic Professional Engineers Conference, Washington, DC.

Saloni, D. (2009). Role of Bioenergy Plantations in Creating a Transportation Biofuel Industry. Southern Forest Economics Workers 2009 Annual Meeting Proceedings. Presented at the Southern Forest Economics Workers 2009 Annual Meeting, Chapel Hill, North Carolina, USA.

Gonzalez, R., Saloni, D., Phillips, R., & Wright, J. (2009). Role of bioenergy plantations in creating a transportation biofuel. Presented at the Southern Forest Economics Workers (SOFEW).

Pirraglia, A., Saloni, D., & Dyk, H. (2009). Status of lean manufacturing implementation on secondary wood industries including residential, cabinet, millwork, and panel markets. BioResources, 4(4), 1341–1358.

Gonzalez, R., Jameel, H., Chang, H., Phillips, R., & Saloni, D. (2009). Thermo-Mechanical Pulping and Post-treatment of Agriculture Biomass for Ethanol Production: Developing More Efficient-Low Capital Intensive Process. Poster presented at the SHPE National Conference, Washington, DC.

Gonzalez, R., Wright, J., & Saloni, D. (2009, August). Woody Biomass. Filling a need: Forest Plantations for Bioenergy in Southern U.S. Biomass Magazine.

Velarde, G., Gonzalez, R., Saloni, D., & Handfield, R. (2009). Worldwide Pulp and Paper Industry: facing the crisis. TAPPI Paper 360 Magazine.

Pirraglia, A., Saloni, D., Lemaster, R., & Gasparin, H. (2008). Designing and implementing a quantitative methodology able to forecast the behavior of experimental data for abrasive machining. Presented at the SHPE Conference.

Pirraglia, A., Saloni, D., Lemaster, R., & Gasparin, H. (2008). Designing and testing of a quantitative methodology capable of forecast the behavior of experimental data sanding and cleaning of the sanding belts for abrasive machining. Presented at the Forest Product Society, 62nd International Convention, St. Louis, Missouri.

Saloni, D., & Pirraglia, A. (2008). Implementation of lean manufacturing in the secondary wood industry. Presented at the Operational Excellence Conference, Institute of Industrial Engineers, Minneapolis, MN.

Gonzalez, R. W., Saloni, D., Dasmohapatra, S., & Cubbage, F. (2008). South America: Industrial roundwood supply potential. BioResources, 3(1), 255–269.

Gonzalez, R., Dasmohapatra, S., Saloni, D., & Cubbage, F. (2008). South America: Industrial roundwood supply potential. Presented at the Forest Product Society, 62nd International Convention, St. Louis, Missouri.

Gonzalez, R., Dasmohapatra, S., Carrero, O., & Saloni, D. (2008). The market of pulp and paper in Venezuela. TAPPI Paper 360 Magazine.

Gonzalez, R., Dasmohapatra, S., Saloni, D., & Cubbage, F. (2008). Timberland ownership shifts and forest management intensity in Southern U.S. Presented at the Southern Forest Resource Assessment Consortium (SOFAC).

Saloni, D., & Lemaster, R. (2007). Design and development of a process monitoring and control system for abrasive machining processes. Presented at the International Wood machining Seminar, Vancouver, CA.

Saloni, D., Lemaster, R., & Cardenas, A. (2007). Process monitoring of the abrasive machining process when wood is used. Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Nashville, TN.

Barreto, N., Saloni, D., Cardenas, A., Gasparin, H., & Lemaster, R. (2007). Simulation model design as a tool for improving abrasive machining process. Presented at the Institute of Industrial Engineers Solutions Conference. Institute of Industrial Engineers, Nashville, TN.

Saloni, D., Cardenas, A., & Lemaster, R. (2006). Abrasive cleaning analysis when thermal-shock techniques are used. Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Orlando, FL.

Saloni, D., Cardenas, A., Li, D., & Lemaster, R. (2006). Abrasive loading prevention by controlling temperature using thermal-shock techniques. Presented at the Industrial Engineering Research Conference. Institute of Industrial Engineers, Orlando, FL.

Saloni, D., Cardenas, A., & Lemaster, R. (2006). Analisis de la implementacion de la manufactura esbelta en la industria maderera. Presented at the Solutions Conference / Latin American Track. Institute of Industrial Engineers, Orlando, FL.

Saloni, D. E., Lemaster, R. L., & Jackson, S. D. (2005). Abrasive machining process characterization on material removal rate, final surface texture, and power consumption for wood. Forest Products Journal, 55(12), 35–41.

Buehlmann, U., Ndiapi, O., Saloni, D., Lemaster, R., & Wolcott, M. (2005). Influence of woodfiber-plastic material composition on machining and abrasion performance. Presented at the Sixth International Conference on wood-fiber plastic composites, Madison, WI.

Saloni, D., Lemaster, R., Cardenas., A., Buehlmann, U., & Meier, W. (2005). Lean Manufacturing potential in the American Wood Industry. Presented at the 5th Annual Lean Management Solutions. Institute of Industrial Engineers, Orlando, FL.

Saloni, D., Buehlmann, U., Cardenas, A., Lemaster, R., & Meier, W. (2005). Lean manufacturing system and implementation analysis in the North Carolina wood industry. Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

Buehlmann, U., Ndiapi, O., Saloni, D., Lemaster, R., & Wolcott, M. (2005). Machining and abrasion performance of woodfiber plastic composites. Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

Saloni, D., Horn, T., & Lemaster, R. (2005). Preliminary research on Caribbean pine subjected to secondary machining process. Poster presented at the Forest Products Society. FPS 59th International Convention, Quebec City, Quebec, CA.

Saloni, D., Lemaster, R., Horn, T., & Cardenas, A. (2005). Preliminary research on cleaning characterization on abrasive machining process when wood is used. Presented at the Industrial Engineering Research Conference, Atlanta, GA.

Saloni, D., & Lemaster, R. (2005). Process monitoring applications on abrasive belt loading. Presented at the Forest Products Society. FPS 59th International Convention, Quebec City, CA.

Saloni, D., Lemaster, R., & Jackson, S. (2004). Abrasive machining process characterization on power consumption when wood is used. Presented at the Industrial Engineering Research Conference, Houston, TX.

Carrano, A. L., Taylor, J. B., Young, R. E., Lemaster, R. L., & Saloni, D. E. (2004). Fuzzy knowledge-based modeling and statistical regression in abrasive wood machining. Forest Products Journal, 54(5), 66–72.

Saloni, D., & Lemaster, R. (2004). Update of abrasive machining research for processing wood products. Presented at the 1st Annual Manufacturing Technology Summit Conference, Society of Manufacturing Engineers, Dearborn, MI.

Saloni, D., Carrano, A., & Lemaster, R. (2003). Comparison between different geometric shapes of engineered abrasives on material removal and surface quality. Presented at the Industrial Engineering Research Conference, Portland, OR.

Saloni, D., Buehlmann, U., & Lemaster, R. (2003). Woodfiber-Plastic Composites Machining Characteristics. Presented at the 14th The International Conference on Composite Materials, Society of Manufacturing Engineers, San Diego, CA.

Saloni, D., Carrano, A., & Lemaster, R. (2002). Traditional versus engineered abrasives on material removal and surface quality. Presented at the Industrial Engineering Research Conference, Orlando, FL.

Buehlmann, U., Saloni, D., & Lemaster, R. (2001). Characterization of Material Properties of Woodfiber-Plastic Composites Exposed to Secondary Manufacturing Processes. Proceedings of the Sixth International Conference on Woodfiber-Plastic Composites, 239–247.

Lemaster, R., Saloni, D., & Rodkwan, S. (2001). Update of Process Monitoring and Control Research at NC State University. Proceedings of the 15th International Wood Machining Seminar, 511–522.

Buehlmann, U., Saloni, D., & Lemaster, R. (2001). Wood fiber-plastic composites: machining and surface quality. Proceedings of the 15th International Wood Machining Seminar, 403–417.