Djamel Kaoumi Beausoleil, G., Zillinger, J., Hawkins, L., Yao, T., Weiss, A. G., Pu, X., … Kaoumi, D. (2023, September 20). Designing Nuclear Fuels with a Multi-Principal Element Alloying Approach. NUCLEAR TECHNOLOGY, Vol. 9. https://doi.org/10.1080/00295450.2023.2236796 Chan, H. L., Auguste, R., Romanovskaia, E., Morales, A. L., Schmidt, F., Romanovski, V., … Scully, J. R. (2023). Multi-length scale characterization of point defects in thermally oxidized, proton irradiated iron oxides. MATERIALIA, 28. https://doi.org/10.1016/j.mtla.2023.101762 Chan, H. L., Auguste, R., Romanovskaia, E., Morales, A. L., Liedke, M. O., Schmidt, F., … Scully, J. R. (2023, September). Multi-length scale characterization of point defects in thermally oxidized, proton irradiated iron oxides (vol 28, 101762, 2023). MATERIALIA, Vol. 31. https://doi.org/10.1016/j.mtla.2023.101868 Agarwal, S., Butterling, M., Liedke, M. O., Yano, K. H., Schreiber, D. K., Jones, A. C. L., … Selim, F. A. (2022).

The mechanism behind the high radiation tolerance of Fe-Cr alloys

. JOURNAL OF APPLIED PHYSICS, 131(12). https://doi.org/10.1063/5.0085086 Auguste, R., Chan, H. L., Romanovskaia, E., Qiu, J., Schoell, R., Liedke, M. O., … Scully, J. R. (2022). A multimodal approach to revisiting oxidation defects in Cr2O3. NPJ MATERIALS DEGRADATION, 6(1). https://doi.org/10.1038/s41529-022-00269-7 Fang, X. T., Li, Z. K., Wang, Y. F., Ruiz, M., Ma, X. L., Wang, H. Y., … Zhu, Y. T. (2022, January 30). Achieving high hetero-deformation induced (HDI) strengthening and hardening in brass by dual heterostructures. https://doi.org/10.1016/j.jmst.2021.03.088 Schoell, R., Kabel, J., Lam, S., Sharma, A., Michler, J., Hosemann, P., & Kaoumi, D. (2022). Corrosion behavior of a series of combinatorial physical vapor deposition coatings on SiC in a simulated boiling water reactor environment. JOURNAL OF NUCLEAR MATERIALS, 572. https://doi.org/10.1016/j.jnucmat.2022.154022 Hong, M., Morales, A. L., Chan, H. L., Macdonald, D. D., Balooch, M., Xie, Y., … Hosemann, P. (2022). Effect of thermal oxidation on helium implanted 316L stainless steel. JOURNAL OF APPLIED PHYSICS, 132(18). https://doi.org/10.1063/5.0122487 Schoell, R., Xi, L., West, H., Hosemann, P., Park, J.-S., Kenesei, P., … Kaoumi, D. (2022). Investigation of the fatigue crack behavior of 304 stainless steels using synchrotron X-ray tomography and diffraction: Influence of the martensite fraction and role of inclusions. MATERIALS CHARACTERIZATION, 188. https://doi.org/10.1016/j.matchar.2022.111903 Horn, T., Rock, C., Kaoumi, D., Anderson, I., White, E., Prost, T., … Darsell, J. (2022). Laser Powder Bed Fusion Additive Manufacturing of Oxide Dispersion Strengthened Steel Using Gas Atomized Reaction Synthesis Powder. SSRN. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85127703398&partnerID=MN8TOARS Saptarshi, S., DeJong, M., Rock, C., Anderson, I., Napolitano, R., Forrester, J., … Horn, T. (2022, August 2). Laser Powder Bed Fusion of ODS 14YWT from Gas Atomization Reaction Synthesis Precursor Powders. JOM, Vol. 8. https://doi.org/10.1007/s11837-022-05418-6 Horn, T., Rock, C., Kaoumi, D., Anderson, I., White, E., Prost, T., … Darsell, J. (2022). Laser powder bed fusion additive manufacturing of oxide dispersion strengthened steel using gas atomized reaction synthesis powder. MATERIALS & DESIGN, 216. https://doi.org/10.1016/j.matdes.2022.110574 Schoell, R., Xi, L., Zhao, Y., Wu, X., Hong, Y., Yu, Z., … Kaoumi, D. (2022). Mechanism of chlorine-induced stress corrosion cracking of two 304 SS heats in simulated marine environment through in situ X-ray tomography and diffraction: Role of deformation induced martensite and crack branching. MATERIALS CHARACTERIZATION, 190. https://doi.org/10.1016/j.matchar.2022.112020 Beausoleil, G. L., Parry, M. E., Mondal, K., Gomez-Hurtado, L. R., Aguiar, J. A., Kaoumi, D., & Kwon, S. (2022). Spark Plasma Sintered Monbti Based Multi Principal Element Alloys with Cr, V, and Zr. SSRN. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85130733691&partnerID=MN8TOARS Beausoleil Ii, G. L., Parry, M. E., Mondal, K., Kwon, S., Gomez-Hurtado, L. R., Kaoumi, D., & Aguiar, J. A. (2022). Spark plasma sintered, MoNbTi-based multi-principal element alloys with Cr, V, and Zr. JOURNAL OF ALLOYS AND COMPOUNDS, 927. https://doi.org/10.1016/j.jallcom.2022.167083 Owusu-Mensah, M., Cooper, J., Morales, A. L., Yano, K., Taylor, S. D., Schreiber, D. K., … Kaoumi, D. (2022). Surprisingly high irradiation-induced defect mobility in Fe3O4 as revealed through in situ transmission electron microscopy. MATERIALS CHARACTERIZATION, 187. https://doi.org/10.1016/j.matchar.2022.111863 Jublot-Leclerc, S., Owusu-Mensah, M., Borodin, V. A., Ribis, J., Largeau, L., Schoell, R., … Gentils, A. (2022). Synthesis of Nano-Oxide Precipitates by Implantation of Ti, Y and O Ions in Fe-10%Cr: Towards an Understanding of Precipitation in Oxide Dispersion-Strengthened (ODS) Steels. MATERIALS, 15(14). https://doi.org/10.3390/ma15144857 Zhao, Y., Schoell, R., Zheng, C., Cinbiz, M. N., Frost, M., An, K., & Kaoumi, D. (2021). Creep properties of advanced austenitic steel 709 determined through short experiments under in-situ neutron diffraction followed by TEM characterization. MATERIALS CHARACTERIZATION, 182. https://doi.org/10.1016/j.matchar.2021.111519 Qiu, J., Macdonald, D. D., Schoell, R., Han, J., Mastromarino, S., Scully, J. R., … Hosemann, P. (2021). Electrochemical study of the dissolution of oxide films grown on type 316L stainless steel in molten fluoride salt. CORROSION SCIENCE, 186. https://doi.org/10.1016/j.corsci.2021.109457 Duemmler, K., Zheng, C., Baumier, C., Gentils, A., & Kaoumi, D. (2021). Helium bubble nucleation and growth in alloy HT9 through the use of in situ TEM: Sequential he-implantation and heavy-ion irradiation versus dual-beam irradiation. JOURNAL OF NUCLEAR MATERIALS, 545. https://doi.org/10.1016/j.jnucmat.2020.152641 Agarwal, S., Liedke, M. O., Jones, A. C. L., Reed, E., Kohnert, A. A., Uberuaga, B. P., … Selim, F. A. (2020). A new mechanism for void-cascade interaction from nondestructive depth-resolved atomic-scale measurements of ion irradiation-induced defects in Fe. SCIENCE ADVANCES, 6(31). https://doi.org/10.1126/sciadv.aba8437 Derby, B., Cooper, J., Lach, T., Martinez, E., Kim, H., Baldwin, J. K., … Li, N. (2020). A pathway to synthesizing single-crystal Fe and FeCr films. Surface and Coatings Technology, 403. https://doi.org/10.1016/j.surfcoat.2020.126346 Fang, X. T., Li, Z. K., Wang, Y. F., Ruiz, M., Ma, X. L., Wang, H. Y., … Zhu, Y. T. (2020). Achieving High Hetero-Deformation Induced (HDI) Strengthening and Hardening in Brass by Dual Heterostructures. SSRN. https://doi.org/10.2139/ssrn.3603553 Qiu, J., Macdonald, D. D., Li, N., Schoell, R., Kaoumi, D., & Hosemann, P. (2020). An Electrochemical Impedance Spectroscopic Study of Oxide Films in Liquid Metal. JOM, 72(5), 2082–2088. https://doi.org/10.1007/s11837-020-04120-9 Remillieux, M. C., Kaoumi, D., Ohara, Y., Geesey, M. A. S., Xi, L., Schoell, R., … Shayer, Z. (2020). Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel. NDT & E INTERNATIONAL, 109. https://doi.org/10.1016/j.ndteint.2019.102180 Zheng, C., & Kaoumi, D. (2020). Dislocation loop evolution in F/M steel T91 under in-situ ion irradiation: Influence of the presence of initial dislocations. JOURNAL OF NUCLEAR MATERIALS, 540. https://doi.org/10.1016/j.jnucmat.2020.152363 Fang, X. T., He, G. Z., Zheng, C., Ma, X. L., Kaoumi, D., Li, Y. S., & Zhu, Y. T. (2020). Effect of heterostructure and hetero-deformation induced hardening on the strength and ductility of brass. ACTA MATERIALIA, 186, 644–655. https://doi.org/10.1016/j.actamat.2020.01.037 Qiu, J., Han, J., Schoell, R., Popovic, M., Ghanbari, E., Kaoumi, D., … Hosemann, P. (2020). Electrical properties of thermal oxide scales on pure iron in liquid lead-bismuth eutectic. CORROSION SCIENCE, 176. https://doi.org/10.1016/j.corsci.2020.109052 Qiu, J., Han, J., Schoell, R., Popovic, M., Ghanbari, E., Kaoumi, D., … Hosemann, P. (2020). Electrical properties of thermal oxide scales on pure iron in liquid lead-bismuth eutectic. ArXiv. https://doi.org/10.48550/arxiv.2010.05372 Schoell, R., Frazer, D., Zheng, C., Hosemann, P., & Kaoumi, D. (2020). In Situ Micropillar Compression Tests of 304 Stainless Steels After Ion Irradiation and Helium Implantation. JOM, 72(7), 2778–2785. https://doi.org/10.1007/s11837-020-04127-2 Owusu-Mensah, M., Cooper, J., & Kaoumi, D. (2020). In situ TEM investigation of irradiation induced amorphization of fe oxide. Microscopy and Microanalysis. https://doi.org/10.1017/S1431927620016189 Schoell, R., Xi, L., Zhao, Y., Wu, X., Yu, Z., Kenesei, P., … Kaoumi, D. (2020). In situ synchrotron X-ray tomography of 304 stainless steels undergoing chlorine-induced stress corrosion cracking. CORROSION SCIENCE, 170. https://doi.org/10.1016/j.corsci.2020.108687 Zheng, C., Reese, E. R., Field, K. G., Liu, T., Marquis, E. A., Maloy, S. A., & Kaoumi, D. (2020). Microstructure response of ferritic/martensitic steel HT9 after neutron irradiation: Effect of temperature. JOURNAL OF NUCLEAR MATERIALS, 528. https://doi.org/10.1016/j.jnucmat.2019.151845 Zhao, Y., Cinbiz, M. N., Park, J.-S., Almer, J., & Kaoumi, D. (2020). Tensile behavior and microstructural evolution of a Fe-25Ni-20Cr austenitic stainless steel (alloy 709) from room to elevated temperatures through in-situ synchrotron X-ray diffraction characterization and transmission electron microscopy. JOURNAL OF NUCLEAR MATERIALS, 540. https://doi.org/10.1016/j.jnucmat.2020.152367 Zheng, C., Ke, J.-H., Maloy, S. A., & Kaoumi, D. (2019). Correlation of in-situ transmission electron microscopy and microchemistry analysis of radiation-induced precipitation and segregation in ion irradiated advanced ferritic/martensitic steels. SCRIPTA MATERIALIA, 162, 460–464. https://doi.org/10.1016/j.scriptamat.2018.12.018 Marsh, C., Schoell, R., & Kaoumi, D. (2019). Environmental effect on mechanical properties of a gamma-prime strengthened nickel-based alloy: Effect of the surface oxidation and formation of gamma-prime free zones. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 752, 136–144. https://doi.org/10.1016/j.msea.2019.03.013 Kaoumi, D., & Jammot, V. (2019). Insights into the plastic behavior of irradiated Ni-based alloy through in-situ TEM experiments: Formation and evolution of defect-free channels. JOURNAL OF NUCLEAR MATERIALS, 523, 33–42. https://doi.org/10.1016/j.jnucmat.2019.05.037 Kabel, J., Koyanagi, T., Katoh, Y., Schoell, R., Kaoumi, D., Ang, C., & Hosemann, P. (2019). Interface characterization of candidate dual-purpose barrier coatings for SiC/SiC accident tolerant fuel cladding. 19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, EnvDeg 2019, 1043–1051. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85080034549&partnerID=MN8TOARS Barr, C. M., El-Atwani, O., Kaoumi, D., & Hattar, K. (2019). [Review of Interplay Between Grain Boundaries and Radiation Damage]. JOM, 71(4), 1233–1244. https://doi.org/10.1007/s11837-019-03386-y Zheng, C., Schoell, R., Hosemann, P., & Kaoumi, D. (2019). Ion irradiation effects on commercial PH 13-8 Mo maraging steel Corrax. JOURNAL OF NUCLEAR MATERIALS, 514, 255–265. https://doi.org/10.1016/j.jnucmat.2018.11.041 Zheng, C., Reese, E. R., Field, K. G., Marquis, E., Maloy, S. A., & Kaoumi, D. (2019). Microstructure response of ferritic/martensitic steel HT9 after neutron irradiation: effect of dose. JOURNAL OF NUCLEAR MATERIALS, 523, 421–433. https://doi.org/10.1016/j.jnucmat.2019.06.019 Kaoumi, D., & Liu, J. (2018). Deformation induced martensitic transformation in 304 austenitic stainless 1 steel: In-situ vs. ex-situ transmission electron microscopy characterization. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 715, 73–82. https://doi.org/10.1016/j.msea.2017.12.036 Zheng, C., Maloy, S., & Kaoumi, D. (2018). Effect of dose on irradiation-induced loop density and Burgers vector in ion-irradiated ferritic/martensitic steel HT9. Philosophical Magazine, 98(26), 2440–2456. https://doi.org/10.1080/14786435.2018.1490825 Shayer, Z., Yu, Z., Olson, D. L., Liu, S., Gordon, S., Wu, X., … Johns, J. R. (2018). Integrated research program overview on the “innovative approaches to marine atmospheric stress corrosion cracking inspection, evaluation and modeling in used-fuel dry storage canisters.” In Ceramic Transactions (Vol. 262, pp. 151–164). Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85055490485&partnerID=MN8TOARS Liu, J., & Kaoumi, D. (2018). Use of in-situ TEM to characterize the deformation-induced martensitic transformation in 304 stainless steel at cryogenic temperature. MATERIALS CHARACTERIZATION, 136, 331–336. https://doi.org/10.1016/j.matchar.2017.12.005 Hosemann, P., Frazer, D., Kaoumi, D., & Zheng, C. (2017). Microstructural and Nanomechanical Characterization of In-Situ He Implanted and Irradiated fcc Materials. Microscopy and Microanalysis, 23(S1), 756–757. https://doi.org/10.1017/S1431927617004445 Byun, T. S., Kaoumi, D., & Bai, X.-M. (2017, December 15). Microstructural processes in irradiated materials. JOURNAL OF NUCLEAR MATERIALS, Vol. 497, pp. 107–107. https://doi.org/10.1016/j.jnucmat.2017.10.065 Kaoumi, D., & Zheng, C. (2017). Microstructure Characterization of Ion-irradiated Ferritic/Martensitic HT9 Steel. Microscopy and Microanalysis, 23(S1), 2214–2215. https://doi.org/10.1017/S1431927617011734 Zheng, C., Auger, M. A., Moody, M. P., & Kaoumi, D. (2017). Radiation induced segregation and precipitation behavior in self-ion irradiated Ferritic/Martensitic HT9 steel. Journal of Nuclear Materials, 491, 162–176. https://doi.org/10.1016/j.jnucmat.2017.04.040 Zheng, C., & Kaoumi, D. (2017). Radiation-induced swelling and radiation-induced segregation & precipitation in dual beam irradiated Ferritic/Martensitic HT9 steel. MATERIALS CHARACTERIZATION, 134, 152–162. https://doi.org/10.1016/j.matchar.2017.10.019 Marsh, C., & Kaoumi, D. (2017). Serrated tensile flow in inconel X750 sheets: Effect of heat treatment. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 707, 136–147. https://doi.org/10.1016/j.msea.2017.08.093 Huang, Z., Abad, M. D., Ramsey, J. K., de Figueiredo, M. R., Kaoumi, D., Li, N., … Hosemann, P. (2016). A high temperature mechanical study on PH 13-8 Mo maraging steel. Materials Science and Engineering: A, 651, 574–582. https://doi.org/10.1016/J.MSEA.2015.10.077 Marsh, C., Depinoy, S., & Kaoumi, D. (2016). Effect of heat treatment on the temperature dependence of the fracture behavior of X-750 alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 677, 474–484. https://doi.org/10.1016/j.msea.2016.09.081 Kaoumi, D., Garde, A., & Pan, G. (2016). In-situ ion irradiation of ZIRLO® alloy. Top Fuel 2016: LWR Fuels with Enhanced Safety and Performance, 417–424. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85019028888&partnerID=MN8TOARS Marsh, C., & Kaoumi, D. (2016). Tensile behavior of inconel X750 Sheets: Effect of heat treatment. Transactions of the American Nuclear Society, 115, 469–472. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85029410263&partnerID=MN8TOARS Allen, T. R., Kaoumi, D., Wharry, J. P., Jiao, Z., Topbasi, C., Kohnert, A., … Yang, Y. (2015). Characterization of microstructure and property evolution in advanced cladding and duct: Materials exposed to high dose and elevated temperature. Journal of Materials Research, 30(9), 1246–1274. https://doi.org/10.1557/jmr.2015.99 Kaoumi, D., Liu, J., & Paul, F.-L. (2015). Deformation induced martensitic transformation in 304 ss. PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, 629–630. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84962758624&partnerID=MN8TOARS Catalini, D., Kaoumi, D., Reynolds, A. P., & Grant, G. J. (2015). Dispersoid Distribution and Microstructure in Fe-Cr-Al Ferritic Oxide Dispersion-Strengthened Alloy Prepared by Friction Consolidation. Metallurgical and Materials Transactions A, 46(10), 4730–4739. https://doi.org/10.1007/S11661-015-3059-1 Kaoumi, D., Weber, W. J., Hattar, K., & Ribis, J. (2015). Introduction. Journal of Materials Research, 30(9), 1157. https://doi.org/10.1557/jmr.2015.133 Topbasi, C., Kaoumi, D., Motta, A. T., & Kirk, M. A. (2015). Microstructural evolution in NF616 (P92) and Fe–9Cr–0.1C-model alloy under heavy ion irradiation. Journal of Nuclear Materials, 466, 179–186. https://doi.org/10.1016/J.JNUCMAT.2015.07.003 Vo, H., Reichardt, A., Howard, C., Abad, M. D., Kaoumi, D., Chou, P., & Hosemann, P. (2015). Small-Scale Mechanical Testing on Proton Beam-Irradiated 304 SS from Room Temperature to Reactor Operation Temperature. JOM, 67(12), 2959–2964. https://doi.org/10.1007/S11837-015-1596-0 Kaoumi, D., Gautier, T., Adamson, J., & Kirk, M. (2015). Using In-Situ TEM to Characterize the Microstructure Evolution of Metallic Systems under External Solicitation. Microscopy and Microanalysis, 21(S3), 111–112. https://doi.org/10.1017/S143192761500135X Kaoumi, D., Adamson, J., & Kirk, M. (2014). Microstructure evolution of two model ferritic/martensitic steels under in situ ion irradiation at low doses (0–2dpa). Journal of Nuclear Materials, 445(1-3), 12–19. https://doi.org/10.1016/J.JNUCMAT.2013.10.047 Kaoumi, D., & Adamson, J. (2014). Self-ordered defect structures in two model F/M steels under in situ ion irradiation. Journal of Nuclear Materials, 448(1-3), 233–238. https://doi.org/10.1016/J.JNUCMAT.2014.01.048 Kaoumi, D., & Hrutkay, K. (2014). Tensile deformation behavior and microstructure evolution of Ni-based superalloy 617. Journal of Nuclear Materials, 454(1-3), 265–273. https://doi.org/10.1016/J.JNUCMAT.2014.08.003 Hrutkay, K., & Kaoumi, D. (2014). Tensile deformation behavior of a nickel based superalloy at different temperatures. Materials Science and Engineering: A, 599, 196–203. https://doi.org/10.1016/J.MSEA.2014.01.056 Catalini, D., Kaoumi, D., Reynolds, A. P., & Grant, G. J. (2013). Friction Consolidation of MA956 powder. Journal of Nuclear Materials, 442(1-3), S112–S118. https://doi.org/10.1016/j.jnucmat.2012.11.054 Goddard, J., & Kaoumi, D. (2013). Precipitate characterization in two ODS steels using synchrotron XRD of consolidated samples and Cu-Kα XRD of precipitate extractions. Transactions of the American Nuclear Society, 109(PART 1), 576–579. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84902780874&partnerID=MN8TOARS Hrutkay, K., & Kaoumi, D. (2013). Tensile behavior of inconel 617 vs. Haynes 230: Effects of temperature and strain rate. Transactions of the American Nuclear Society, 109(PART 1), 644–647. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84902821147&partnerID=MN8TOARS Catalini, D., Kaoumi, D., Reynolds, A., & Grant, G. (2012). Friction consolidation of an oxide dispersion strengthened steel. Transactions of the American Nuclear Society, 107, 458–461. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84876557879&partnerID=MN8TOARS Kaoumi, D., Motta, A. T., Kirk, M., Faney, T., Wirth, B., & Bentley, J. (2010). In Situ TEM Studies of Microstructure Evolution Under Ion Irradiation for Nuclear Engineering Applications. Microscopy and Microanalysis, 16(S2), 1606–1607. https://doi.org/10.1017/S143192761006321X Kirk, M. A., Baldo, P. M., Liu, A. C. Y., Ryan, E. A., Birtcher, R. C., Yao, Z., … Motta, A. T. (2009). In situ transmission electron microscopy and ion irradiation of ferritic materials. Microscopy Research and Technique, 72(3), 182–186. https://doi.org/10.1002/jemt.20670 Bentley, J., Hoelzer, D. T., Busby, J. T., Certain, A. G., Allen, T. R., Kaoumi, D., … Kirk, M. A. (2009). TEM Characterization of Crept and Irradiated Nano-structured Ferritic Alloys. Microscopy and Microanalysis, 15(S2), 1350–1351. https://doi.org/10.1017/S1431927609095828 Kaoumi, D., Motta, A. T., & Birtcher, R. C. (2008). A thermal spike model of grain growth under irradiation. Journal of Applied Physics, 104(7), 073525. https://doi.org/10.1063/1.2988142 Kaoumi, D., Motta, A., & Kirk, M. (2008). Characterization and in-situ ion-irradiation of MA957 ODS steel. Transactions of the American Nuclear Society, 98, 1113–1114. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-55249124982&partnerID=MN8TOARS Kaoumi, D., Motta, A. T., & Birtcher, R. C. (2008). Grain growth in nanocrystalline metal thin films under in situ ion-beam irradiation. ASTM Special Technical Publication, 1492 STP, 206–218. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-62849116960&partnerID=MN8TOARS Kaoumi, D., Motta, A. T., & Birtcher, R. C. (2008). Influence of alloying elements on grain-growth in Zr(Fe) and Cu(Fe) thin-films under in situ ion-irradiation. Journal of Nuclear Materials, 382(2-3), 184–189. https://doi.org/10.1016/j.jnucmat.2008.08.011 Kaoumi, D., Motta, A. T., & Birtcher, R. C. (2007). Grain growth in nanocrystalline metal thin films under in situ ion-beam irradiation. Journal of ASTM International, 4(8). https://doi.org/10.1520/JAI100743 Kaoumi, D., Motta, A. T., & Birtcher, R. C. (2006). Grain growth in Zr–Fe thin films during in situ ion irradiation in a TEM. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 242(1-2), 490–493. https://doi.org/10.1016/j.nimb.2005.08.158 Kaoumi, D., Motta, A. T., & Birtcher, R. C. (2005). Irradiation-enhanced second-phase precipitation in Zr-Fe nanocrystalline thin films. Materials Research Society Symposium Proceedings, 908, 7–12. https://doi.org/10.1557/proc-0908-oo04-04