Jeffrey Eischen

Rao, V. N., & Eischen, J. W. (2020). Failure analysis of fretting fracture in frame rails of heavy duty trucks - Case study. ENGINEERING FAILURE ANALYSIS, 113. https://doi.org/10.1016/j.engfailanal.2020.104544

Rao, V. N., & Eischen, J. W. (2016). Failure analysis of mixed mode crack growth in heavy duty truck frame rail. Case Studies in Engineering Failure Analysis, 5-6, 67–74. https://doi.org/10.1016/j.csefa.2016.03.002

Stamps, M. A., Eischen, J., & Huang, H. Y. S. (2016). Particle- and crack-size dependency of lithium-ion battery materials LiFePO4. AIMS Materials Science, 3(1), 190–203. https://doi.org/10.3934/matersci.2016.1.190

Kenkare, N., Lamar, T. A. M., Pandurangan, P., & Eischen, J. (2008). Enhancing accuracy of drape simulation. Part I: Investigation of drape variability via 3D scanning. Journal of the Textile Institute, 99(3), 211–218. https://doi.org/10.1080/00405000701489222

Pandurangan, P., Eischen, J., Kenkare, N., & Lamar, T. A. M. (2008). Enhancing accuracy of drape simulation. Part II: Optimized drape simulation using industry-specific software. Journal of the Textile Institute, 99(3), 219–226. https://doi.org/10.1080/00405000701489198

Jernigan, S. R., Buckner, G. D., & Eischen, J. (2007). Finite element modeling of the left atrium to facilitate the design of an endoscopic atrial retractor. Journal of Biomechanical Engineering, 129(6), 825–837. https://doi.org/10.1115/1.2801650

Eischen, J., & Monsivais, G. (2007). Special issue - Ninth Pan American Congress of Applied Mechanics - Preface. Journal of Mechanics of Materials and Structures, 2(8), 1395–1395. https://doi.org/10.2140/jomms.2007.2.1395

Palmer, J. A., Dessent, B., Mulling, J. F., Usher, T., Grant, E., Eischen, J., … Franzon, P. (2004). The  design and characterization of a novel piezoelectric transducer-based linear motor. IEEE/ASME Transactions on Mechatronics, 9(2), 392–398. https://doi.org/10.1109/TMECH.2004.828647

Lankalapalli, S., & Eischen, J. (2003). Optimal pick-up locations for transport and handling of limp materials - Part I: One-dimensional strips. Textile Research Journal, 73(9), 787–796. https://doi.org/10.1177/004051750307300907

Lankalapalli, S., & Eischen, J. (2003). Optimal pick-up locations for transport and handling of limp materials - Part II: Two-dimensional parts. Textile Research Journal, 73(10), 867–874. https://doi.org/10.1177/004051750307301004

LaMattina, B., Klang, E. C., & Eischen, J. (1998). A study of solutions for the anisotropic plate subjected to a concentrated force. Journal of Applied Mechanics: Transactions of the ASME, 65(1), 273–276. https://doi.org/10.1115/1.2789039

Wang, H. L., Eischen, J., & Silverberg, L. M. (1998). On control and optimization of elastic multilink mechanisms. Computers and Structures, 67(6), 483–502. https://doi.org/10.1016/s0045-7949(98)00060-1

Tierney, J. W., & Eischen, J. (1997). Residual stress analysis of bimaterial strips under multiple thermal loading. Journal of Electronic Packaging, 119(4), 281–287. https://doi.org/10.1115/1.2792250

Eischen, J., & Shigan, D. (1996). Finite-element modeling and control of flexible fabric parts. IEEE Computer Graphics and Applications, 16(5). https://doi.org/10.1109/38.536277

Eischen, J. W., & Torquato, S. (1993). Determining elastic behavior of composites by the boundary element method. Journal of Applied Physics, 74(1), 159–170. https://doi.org/10.1063/1.354132

Eischen, J. W., & Kim, Y. G. (1993). Optimization of Fabric Manipulation during Pick/Place Operations. International Journal of Clothing Science and Technology, 5(3/4), 68–76. https://doi.org/10.1108/eb003021

Eischen, J. W., Silverberg, L., & Wang, H. L. (1992). Slewing Motion Control of a Very Flexible Elastic Beam. Journal of Applied Mechanics, 59(3), 684–687. https://doi.org/10.1115/1.2893782

Clapp, T. G., Peng, H., Ghosh, T. K., & Eischen, J. W. (1990). Indirect Measurement of the Moment-Curvature Relationship for Fabrics. Textile Research Journal, 60(9), 525–533. https://doi.org/10.1177/004051759006000906

Eischen, J. W., & Herrmann, G. (1987). Energy Release Rates and Related Balance Laws in Linear Elastic Defect Mechanics. Journal of Applied Mechanics, 54(2), 388–392. https://doi.org/10.1115/1.3173024

Sosa, H. A., & Eischen, J. W. (1986). Computation of stress intensity factors for plate bending via a path-independent integral. Engineering Fracture Mechanics, 25(4), 451–462. https://doi.org/10.1016/0013-7944(86)90259-6