Harvey West II Schoell, R., Xi, L., West, H., Hosemann, P., Park, J.-S., Kenesei, P., … Kaoumi, D. (2022). Investigation of the fatigue crack behavior of 304 stainless steels using synchrotron X-ray tomography and diffraction: Influence of the martensite fraction and role of inclusions. MATERIALS CHARACTERIZATION, 188. https://doi.org/10.1016/j.matchar.2022.111903 Rock, C., Ledford, C., Garcia-Avila, M., West, H., Miller, V. M., Pankow, M., … Horn, T. (2021). The Influence of Powder Reuse on the Properties of Nickel Super Alloy ATI 718 (TM) in Laser Powder Bed Fusion Additive Manufacturing. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 52(2), 676–688. https://doi.org/10.1007/s11663-020-02040-2 Rock, C., Vadlakonda, R., Figurskey, S., Ledford, C., West, H., Miller, V., … Horn, T. (2020). Analysis of Self-Organized Patterned Surface Oxide Spots on Ejected Spatter Produced during Laser Powder Bed Fusion. Additive Manufacturing, 35, 101320. https://doi.org/10.1016/j.addma.2020.101320 Mahbooba, Z., Thorsson, L., Unosson, M., Skoglund, P., West, H., Horn, T., … Harrysson, O. (2018). Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness. APPLIED MATERIALS TODAY, 11, 264–269. https://doi.org/10.1016/j.apmt.2018.02.011 Mahbooba, Z., West, H., Harrysson, O., Wojcieszynski, A., Dehoff, R., Nandwana, P., & Horn, T. (2017). Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing. JOM, 69(3), 472–478. https://doi.org/10.1007/s11837-016-2210-9 Xu, Y., Husain, I., West, H., Yu, W. S., & Hopkins, D. C. (2016). Development of an ultra-high density power chip on bus (PCoB) module. 2016 ieee energy conversion congress and exposition (ecce). https://doi.org/10.1109/ecce.2016.7855040 Yang, L., Harrysson, O., Cormier, D., West, H., Gong, H., & Stucker, B. (2015). Additive Manufacturing of Metal Cellular Structures: Design and Fabrication. JOM, 67(3), 608–615. https://doi.org/10.1007/s11837-015-1322-y Yang, L., Harrysson, O. A., West, H. A., II, Cormier, D. R., Park, C., & Peters, K. (2015). Low-energy drop weight performance of cellular sandwich panels. RAPID PROTOTYPING JOURNAL, 21(4), 433–442. https://doi.org/10.1108/rpj-08-2013-0083 Yang, L., Harrysson, O., West, H., & Cormier, D. (2015). Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 69-70, 475–490. https://doi.org/10.1016/j.ijsolstr.2015.05.005 Hasib, H., Harrysson, O. L. A., & West, H. A., II. (2015). Powder Removal from Ti-6Al-4V Cellular Structures Fabricated via Electron Beam Melting. JOM, 67(3), 639–646. https://doi.org/10.1007/s11837-015-1307-x Yang, L., Harrysson, O., West, H., & Cormier, D. (2013). Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure. JOURNAL OF MATERIALS SCIENCE, 48(4), 1413–1422. https://doi.org/10.1007/s10853-012-6892-2 Yang, L., Harrysson, O., West, H., & Cormier, D. (2012). Compressive properties of Ti-6Al-4V auxetic mesh structures made by electron beam melting. ACTA MATERIALIA, 60(8), 3370–3379. https://doi.org/10.1016/j.actamat.2012.03.015 Yang, L., Cormier, D., West, H., Harrysson, O., & Knowlson, K. (2012). Non-stochastic Ti-6Al-4V foam structures with negative Poisson's ratio. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558, 579–585. https://doi.org/10.1016/j.msea.2012.08.053 Aman, R. L., West, H. A., & Cormier, D. R. (2008). An evaluation of loose tenon joint strength. Forest Products Journal, 58(3), 61–64. Cansizoglu, O., Harrysson, O. L. A., West, H. A., II, Cormier, D. R., & Mahale, T. (2008). Applications of structural optimization in direct metal fabrication. RAPID PROTOTYPING JOURNAL, 14(2), 114–122. https://doi.org/10.1108/13552540810862082 Harrysson, O. L. A., CansiZoglu, O., Marcellin-Little, D. J., Cormier, D. R., & West, H. A., II. (2008, April 1). Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, Vol. 28, pp. 366–373. https://doi.org/10.1016/j.msec.2007.04.022 Cansizoglu, O., Harrysson, O., Cormier, D., West, H., & Mahale, T. (2008). Properties of Ti-6Al-4V non-stochastic lattice structures fabricated via electron beam melting. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 492(1-2), 468–474. https://doi.org/10.1016/j.msea.2008.04.002 Cormier, D., Harrysson, A., & West, H. (2004). Characterization of H13 steel produced via electron beam melting. RAPID PROTOTYPING JOURNAL, Vol. 10, pp. 35–41. https://doi.org/10.1108/13552540410512516 Cormier, D. R., Taylor, J. B., & West, H. A., II. (2001). Methods and apparatus for rapidly prototyping three-dimensional objects from a plurality of layers. Washington, DC: U.S. Patent and Trademark Office.