Hechmi Hamouda

Yao, Y., Guo, B., Ji, L., Jung, K.-H., Lin, Z., Alcoutlabi, M., … Zhang, X. (2011). Highly proton conductive electrolyte membranes: Fiber-induced long-range ionic channels. ELECTROCHEMISTRY COMMUNICATIONS, 13(9), 1005–1008. https://doi.org/10.1016/j.elecom.2011.06.028

Yao, Y., Ji, L., Lin, Z., Li, Y., Alcoutlabi, M., Hamouda, H., & Zhang, X. (2011). Sulfonated Polystyrene Fiber Network-Induced Hybrid Proton Exchange Membranes. ACS APPLIED MATERIALS & INTERFACES, 3(9), 3732–3737. https://doi.org/10.1021/am2009184

Yao, Y., Lin, Z., Li, Y., Alcoutlabi, M., Hamouda, H., & Zhang, X. (2011). Superacidic Electrospun Fiber-Nafion Hybrid Proton Exchange Membranes. ADVANCED ENERGY MATERIALS, 1(6), 1133–1140. https://doi.org/10.1002/aenm.201100435

Barker, R. L., Guerth-Schacher, C., Grimes, R. V., & Hamouda, H. (2006). Effects of moisture on the thermal protective performance of firefighter protective clothing in low-level radiant heat exposures. TEXTILE RESEARCH JOURNAL, 76(1), 27–31. https://doi.org/10.1177/0040517506053947

Lee, S. J., Rust, J. P., Hamouda, H., Kim, Y. R., & Borden, R. H. (2005). Fatigue cracking resistance of fiber-reinforced asphalt concrete. TEXTILE RESEARCH JOURNAL, 75(2), 123–128. https://doi.org/10.1177/004051750507500206

Song, G. W., Barker, R. L., Hamouda, H., Kuznetsov, A. V., Chitrphiromsri, P., & Grimes, R. V. (2004). Modeling the thermal protective performance of heat resistant garments in flash fire exposures. TEXTILE RESEARCH JOURNAL, 74(12), 1033–1040. https://doi.org/10.1177/004051750407401201

Barker, R. L., Guerth-Schacher, C., Hamouda, H., & Grimes, R. (2002). Moisture effects on the thermal protective performance of firefighter turnout suits. Textile Technology Forum: October 23, 2002, proceedings 2002, IFAI Expo 2002, October 24-26, 2002, Charlotte, N.C. USA. Roseville, MN: Industrial Fabrics Association International.

Hamouda, H., Xu, W., Qui, Y., & Mohamed, M. (2000). Elasticity analysis of 3D cellular matrix composites. ICCE/7: seventh annual International Conference on Composites Engineering: July 2-8, 2000, Denver, Colorado. [S.l.]: International Community for Composities Engineering.

Hamouda, H., Qui, Y., & Bennett, S. (2000). Interfacial properties effects on microcomposites deformation response: An analytical approach. ICCE/7: seventh annual International Conference on Composites Engineering: July 2-8, 2000, Denver, Colorado. [S.l.]: International Community for Composities Engineering.

Barker, R., Hamouda, H., Johnson, J., Shalev, I., & Bender, M. (1999). Comparison of heat sensors for use in evaluating the thermal protective performance of clothing materials. In C.N. Nelson & N. W. Henry (Eds.), Performance of protective clothing: issues and priorities for the 21st century. Seventh volume. West Conshohocken, PA: ASTM.

Mock, B., & Hamouda, H. (1999). Ozone application to color destruction of industrial wastewater: Part II: Modeling. American Dyestuff Reporter, 88(2), 20–24.

Barker, R. L., Hamouda, H., Shalev, I., & Johnson, J. (1999). Review and evaluation of thermal sensors for use in testing firefighter protective clothing: Final report. In Response of high performance concrete to fire conditions : review of thermal property data and measurement techniques. Gaithersburg, MD : National Institute of Standards and Technology, Building and Fire Research Laboratory.

Barker, R. L., Hamouda, H., Shalev, I., & Johnson, J. (1999). Review and evaluation of thermal sensors for use in testing firefighters protective clothing: Annual report. In National Institute of Standards and Technology (BFRL), Gaithersburg, MD. Mar. 1999. 78 p. Report: NIST/GCR99/773.

Hamouda, H., Barker, R. L., & Millsaps, D. S. (1998). Apparatus for simulating the thermoregulatory responses of human skin and related method for predicting fabric comfort level. Washington, DC: U.S. Patent and Trademark Office.

Mock, B., & Hamouda, H. (1998). Ozone application to color destruction of industrial waste water, part I: Experimental. American Dyestuff Reporter, 87(8).

Millsaps, D. S., Hamouda, H., & Barker, R. L. (1997). Novel sweating hot plate for simulating the thermoregulatory behavior of human skin. In J. O. Stull & A. D. Schwope (Eds.), Performance of protective clothing.  Sixth volume (Vol. 6). West Conshohocken, PA:  ASTM.

Barker, R., Halin, J. J., Mulligan, J. C., & Hamouda, H. (1996). A one-dimensional finite element model of heat transfer through human skin and burn damage assessment. In J. S. Johnson & S. Z. Mansdorf (Eds.), Performance of protective clothing. Fifth volume. West Conshohocken, PA: ASTM.

Halin, J. J., Hamouda, H., Mulligan, J. C., Barker, R. L., Behnke, W. P., & Soroka, T. (1996). A sensitivity study of variable-property skin burn model considering the variability of water contents. In J. S. Johnson & S. Z. Mansdorf (Eds.), Performance of protective clothing. Fifth volume (pp. 592–606). West Conshohocken, PA: ASTM.

Grimes, R. V., Hamouda, H., Mulligan, J. C., Barker, R. L., Behnke, W. P., & Soroka, T. (1996). The design of a surface heat flux transducer for use in fabrics thermal protection testing. In J. S. Johnson & S. Z. Mansdorf (Eds.), Performance of protective clothing. Fifth volume (pp. 607–624). https://doi.org/10.1520/stp14097s

Hamouda, H. (1995). Infrared radiation and convection drying of fibrous structures. Proceedings of the International Conference on Composite Materials and Energy : Enercomp 95, May 8-10, 1995, Montreal Bonaventure Hilton,Montreal, Quebec, Canada. Lancaster, Pa. : Technomic Pub. Co.

Hands, C., Rust, J., & Hamouda, H. (1995). Inter-departmental and inter-institutional experiences associated with industry/university partnerships. Total quality education : proceedings : Illinois/Indiana Sectional Conference, March 16-18, 1995, West Lafayette, Indiana. [S.l.] : ETP.

Hamouda, H. (1995). Quality improvement partnerships with industry using students teams. Journal of Engineering Education, 84(1). https://doi.org/10.1002/j.2168-9830.1995.tb00144.x

Barker, R., Hamouda, H., Behnke, W. P., & Pawar, M. (1994). Applying instrumented manikin technology for testing the fire resistance of protective garments. In J. S. Johnson & S. Z. Mansdorf (Eds.), Performance of protective clothing. Fifth volume. West Conshohocken, PA: ASTM.

Barker, R., Grimes, R. V., Hamouda, H., & Mulligan, J. C. (1994). Design of heat flux transducer for evaluation of fire resistant fabrics. In J. S. Johnson & S. Z. Mansdorf (Eds.), Performance of protective clothing. Fifth volume. West Conshohocken, PA: ASTM.

Rust, J., Hamouda, H., Hewitt, E. R., Shelnut, J. W., & Johnson, T. (1994). Improvement partnerships with industry using process improvement teams of students and faculty. Journal of Engineering Education, 83.

Barker, R., Hamouda, H., Shalev, I., & Kim, J. (1993). Instrumented methods for measuring the surface frictional properties of softener treated fabric. Textile Chemist and Colorist, 25(8), 15–20.

ghosh, Peng, H., Hamouda, H., & Shin, D. H. (1992). ANALYSIS OF FABRIC DEFORMATION IN A ROLL-MAKING OPERATION. TEXTILE RESEARCH JOURNAL, 62(11), 669–676. https://doi.org/10.1177/004051759206201107

GHOSH, T. K., PENG, H., BANKSLEE, P., HAMOUDA, H., & SHIN, D. H. (1991). ANALYSIS OF FABRIC DEFORMATION IN A ROLL-MAKING OPERATION. TEXTILE RESEARCH JOURNAL, 61(3), 153–161. https://doi.org/10.1177/004051759106100305

GHOSH, T. K., PENG, H., BANKSLEE, P., HAMOUDA, H., & SHIN, D. H. (1991). ANALYSIS OF FABRIC DEFORMATION IN A ROLL-MAKING OPERATION .2. A DYNAMIC CASE. TEXTILE RESEARCH JOURNAL, 61(4), 185–192. https://doi.org/10.1177/004051759106100401