Ilona Peszlen Choi, H., Dalton, L. E., Peszlen, I., & Pourghaz, M. (2024). The impacts of CaCO3 deposition in natural wood on its viscoelastic properties. COMPOSITES PART B-ENGINEERING, 275. https://doi.org/10.1016/j.compositesb.2024.111324 Sulis, D. B., Jiang, X., Yang, C., Marques, B. M., Matthews, M. L., Miller, Z., … Wang, J. P. (2023). Multiplex CRISPR editing of wood for sustainable fiber production. SCIENCE, 381(6654), 216-+. https://doi.org/10.1126/science.add4514 Kumar, R., Zambrano, F., Peszlen, I., Venditti, R., Pawlak, J., Jameel, H., & Gonzalez, R. (2022, June 28). High-performance sustainable tissue paper from agricultural residue: a case study on fique fibers from Colombia. CELLULOSE, Vol. 6. https://doi.org/10.1007/s10570-022-04687-3 Frazier, R., Zambrano, F., Pawlak, J. J., Peszlen, I., Welsford, D., & Gonzalez, R. (2022, August 13). The tissue dust analysis system: a new device and methodology to quantify dusting and linting propensity in hygiene tissue papers. CELLULOSE, Vol. 8. https://doi.org/10.1007/s10570-022-04779-0 Peszlen, I., Miller, Z., & Peralta, P. (2022). Wood Properties of CRISPR Gene-edited Poplar. SWST International Convention. Presented at the SWST International Convention, Kingscliff, NSW, Australia. Peszlen, I., Peralta, P., Wang, J., Chiang, V., & Kelly, R. (2021). Bacterial degradation of the cell wall of transgenic poplar with modified lignin content and composition. Society of Wood Science and Technology 2021 International Convention. Presented at the Society of Wood Science and Technology 2021 International Convention, Flagstaff, AZ. Grans, D., Isik, F., Purnell, R. C., Peszlen, I. M., & McKeand, S. E. (2021). Genetic Variation and the Effect of Herbicide and Fertilization Treatments on Wood Quality Traits in Loblolly Pine. FOREST SCIENCE, 67(5), 564–573. https://doi.org/10.1093/forsci/fxab026 Kumar, R., Peszlen, I., & Gonzales, R. (2021). High-Performance Sustainable Tissue Paper from Residue of Decorticated Nonwood Fique Fibers. SWST International Convention. Presented at the SWST International Convention, Flagstaff, AR. Peralta, P., & Peszlen, I. (2021). Pathways to Sustainable Materials Science and Engineering: Enhancing College and Career Opportunities for Minority Women From Rural North Carolina. Society of Wood Science and Technology 2021 International Convention. Presented at the Society of Wood Science and Technology 2021 International Convention, Flagstaff, AZ. Peralta, P., & Peszlen, I. (2021). Plant-Based Materials Selection. Society of Wood Science and Technology 2021 International Convention. Presented at the Society of Wood Science and Technology 2021 International Convention, Flagstaff, AZ. Peralta, P., & Peszlen, I. (2021). Sustainable Materials Science and Technology, A Defining Discipline of Our Time. Society of Wood Science and Technology 2021 International Convention. Presented at the Society of Wood Science and Technology 2021 International Convention, Flagstaff, AZ. Edmunds, C. W., Peralta, P., Sharma-Shivappa, R. R., Kelley, S. S., Chiang, V. L., Miller, Z. D., … Peszlen, I. (2020). Fungal Pretreatment and Enzymatic Hydrolysis of Genetically-modified Populus trichocarpa. BIORESOURCES, 15(3), 6488–6505. https://doi.org/10.15376/biores.15.3.6488-6505 Miller, Z. D., Peralta, P. N., Mitchell, P. H., Kelley, S. S., Chiang, V. L., Pearson, L., … Peszlen, I. M. (2019). ANATOMICAL, PHYSICAL, AND MECHANICAL PROPERTIES OF TRANSGENIC LOBLOLLY PINE (PINUS TAEDA L.) MODIFIED FOR INCREASED DENSITY. WOOD AND FIBER SCIENCE, 51(2), 173–182. https://doi.org/10.22382/wfs-2019-018 Miller, Z. D., Peralta, P. N., Mitchell, P., Chiang, V. L., Kelley, S. S., Edmunds, C. W., & Peszlen, I. M. (2019). Anatomy and Chemistry of Populus trichocarpa with Genetically Modified Lignin Content. BIORESOURCES, 14(3), 5729–5746. https://doi.org/10.15376/biores.14.3.5729-5746 Peszlen, I., Xiang, Z., & Peralta, P. (2019). Cell Morphology and Mechanical Properties of Transgenic Poplar with Reduced Cellulose Content. Society of Wood Science and Technology 2019 International Convention. Presented at the Society of Wood Science and Technology 2019 International Convention, Yosemite, CA. Dick, B., Peralta, P., Mitchell, P., & Peszlen, I. (2019). Comparison of Small- and Intermediate-Scale Fire Performance Tests of Southern Pine Cross-Laminated Timber. Society of Wood Science and Technology 2019 International Convention. Presented at the Society of Wood Science and Technology 2019 International Convention, Yosemite, CA. Abbas, M., Peszlen, I., Shi, R., Kim, H., Katahira, R., Kafle, K., … Li, Q. (2020). Involvement of CesA4, CesA7-A/B and CesA8-A/B in secondary wall formation in Populus trichocarpa wood. Tree Physiology, 40(1), 73–89. https://doi.org/10.1093/treephys/tpz020 Straub, C. T., Khatibi, P. A., Wang, J. P., Conway, J. M., Williams-Rhaesa, A. M., Peszlen, I. M., … Kelly, R. M. (2019). Quantitative fermentation of unpretreated transgenic poplar by Caldicellulosiruptor bescii. NATURE COMMUNICATIONS, 10(1). https://doi.org/10.1038/s41467-019-11376-6 Edmunds, C. W., Peszlen, I., Chiang, V. L., Kelley, S. S., Miller, Z. D., Davis, M. F., … Peralta, P. (2019). Thermo-mechanical Behavior of Genetically Modified Populus trichocarpa. BIORESOURCES, 14(2), 4760–4773. https://doi.org/10.15376/biores.14.2.4760-4773 Miller, Z. D., Peralta, P. N., Mitchell, P., Chiang, V. L., Edmunds, C. W., & Peszlen, I. M. (2018). Altered Lignin Content and Composition in Transgenic Populus trichocarpa Results in a Decrease of Modulus of Elasticity. BIORESOURCES, 13(4), 7698–7708. https://doi.org/10.15376/biores.13.4.7698-7708 Wang, G., Peralta, P., Mitchell, P., & Peszlen, I. (2018). Fire Performance of Southern Yellow Pine Cross-Laminated Timber. Society of Wood Science and Technology 2018 International Convention. Presented at the Society of Wood Science and Technology 2018 International Convention, Nagoya, Japan. Wang, J. P., Matthews, M., Williams, C. M., Shi, R., Yang, C., TunlayaAnukit, S., … Chiang, V. L. (2018). Improving wood properties for wood utilization through multi-omics integration in lignin biosynthesis. Nature Communications, 9(1), 1579. https://doi.org/10.1038/s41467-018-03863-z Wang, G., Peralta, P., Mitchell, P., & Peszlen, I. (2018). Moisture Transport in Southern Yellow Pine Cross-Laminated Timber. Society of Wood Science and Technology 2018 International Convention. Presented at the Society of Wood Science and Technology 2018 International Convention, Nagoya, Japan. Peszlen, I., Miller, Z. D., Edmunds, C. W., & Peralta, P. (2018). Morphological and Mechanical Properties of Transgenic Poplars and Pines with Modified Cell Wall Components. Society of Wood Science and Technology 2018 International Convention. Presented at the Society of Wood Science and Technology 2018 International Convention, Nagoya, Japan. Edmunds, C. W., Peralta, P., Kelley, S. S., Chiang, V. L., Sharma-Shivappa, R. R., Davis, M. F., … Peszlen, I. (2017). Characterization and enzymatic hydrolysis of wood from transgenic Pinus taeda engineered with syringyl lignin or reduced lignin content. CELLULOSE, 24(4), 1901–1914. https://doi.org/10.1007/s10570-017-1231-z Wang, G., Peralta, P., Mitchell, P., & Peszlen, I. (2017). Fire Performance of Edge-Glued Cross-Laminated Timber. NC State University Graduate Student Research Symposium. Presented at the NC State University Graduate Student Research Symposium, Raleigh, NC. Lin, C.-Y., Li, Q., Tunlaya-Anukit, S., Shi, R., Sun, Y.-H., Wang, J. P., … Chiang, V. L. (2016). A cell wall-bound anionic peroxidase, PtrPO21, is involved in lignin polymerization in Populus trichocarpa. Tree Genetics & Genomes, 12(2). https://doi.org/10.1007/S11295-016-0978-Y Edmunds, C. W., Peralta, P., Peszlen, I., Sharma-Shivappa, R., Chiang, V., Kelley, S., & Davis, M. (2016). Characterization and enzymatic hydrolysis of genetically modified Pinus taeda with decreased lignin content and incorporated syringyl lignin. Society of Wood Science and Technology 2016 International Convention. Presented at the Society of Wood Science and Technology 2016 International Convention, Curitiba, Brazil. Edmunds, C. W., Peralta, P., Peszlen, I., Sharma-Shivappa, R., Giles, R., Kelley, S., & Chiang, V. (2016). Fungal degradation method development for small wood samples subjected to Ceriporiopsis subvermispora. Wood and Fiber Science, 48(SI). Retrieved from https://wfs.swst.org/index.php/wfs/article/view/2343/2272 Peszlen, I., Edmunds, C. W., Peralta, P., Giles, R., & Chiang, V. (2016). Fungal pretreatment, white-rot fungi, brown-rot fungi, Populus trichocarpa, genetic modification. Society of Wood Science and Technology 2016 International Convention. Presented at the Society of Wood Science and Technology 2016 International Convention, Curitiba, Brazil. Miller, Z. D., Peszlen, I., & Peralta, P. (2015). Anatomical, Physical and Mechanical Properties of Transgenic Loblolly Pine. Society of Wood Science and Technology 2015 International Convention. Presented at the Society of Wood Science and Technology 2015 International Convention, Great Teton, WY. Edmunds, E. C., Chiang, V., Sharma-Shivappa, R., Giles, R., Peralta, P., & Peszlen, I. (2015). Fungal pretreatment method optimization for small wood samples degraded by Ceriporiopsis subvermispora. Society of Wood Science and Technology 2015 International Convention. Presented at the Society of Wood Science and Technology 2015 International Convention, Great Teton, WY. Edmunds, E. C., Chiang, V., Sharma-Shivappa, R., Giles, R., Peralta, P., & Peszlen, I. (2015). Fungal pretreatment of genetically modified Black Cottonwood - Merging novel low-input fungal pretreatment with next-generation lignocellulosic feedstocks. Society of Wood Science and Technology 2015 International Convention. Presented at the Society of Wood Science and Technology 2015 International Convention, Grand Teton, WY. Miller, Z. D., Chiang, V., Peszlen, I., & Peralta, P. (2015). Influence of Lignin Modification on Microfibril Angle in Young Transgenic Black Cottonwood Trees. Society of Wood Science and Technology 2015 International Convention. Presented at the Society of Wood Science and Technology 2015 International Convention, Great Teton, WY. Dick, B., Peralta, P., & Peszlen, I. (2014). Changes in the Anatomy of Exposed Roots of Some Hardwood Species. Society of Wood Science and Technology 2014 International Convention. Presented at the Society of Wood Science and Technology 2014 International Convention, Zvolen, Slovakia. Miller, Z., Peszlen, I., & Peralta, P. (2014). Chemical and Mechanical Properties of Young Black Cottonwood. 34th Symposium of the Philippine-American Academy of Science and Engineering (PAASE. Presented at the 34th Symposium of the Philippine-American Academy of Science and Engineering (PAASE, Raleigh, NC. Miller, Z., Peszlen, I., & Peralta, P. (2014). Comparing Mechanical and Chemical Properties of Young Transgenic Black Cottonwood Trees Modified for Reduction of Specific Genes in Lignin Biosynthesis. Society of Wood Science and Technology 2014 International Convention. Presented at the Society of Wood Science and Technology 2014 International Convention, Zvolen, Slovakia. Edmunds, C. W., Peralta, P., & Peszlen, I. (2014). Thermo-mechanical properties of genetically modified Populus trichocarpa with altered lignin content and structure. 34th Symposium of the Philippine-American Academy of Science and Engineering (PAASE. Presented at the 34th Symposium of the Philippine-American Academy of Science and Engineering (PAASE, Raleigh, NC. Edmunds, C. W., Peralta, P., & Peszlen, I. (2014). Understanding the relationship between thermo-mechanical behavior and lignin properties in genetically modified Populus trichocarpa. Society of Wood Science and Technology 2014 International Convention, 47. Dick, B. M., Hey, R., Peralta, P., Jewell, I., Simon, P., & Peszlen, I. (2014). ESTIMATING ANNUAL RIVERBANK EROSION RATES-A DENDROGEOMORPHIC METHOD. RIVER RESEARCH AND APPLICATIONS, 30(7), 845–856. https://doi.org/10.1002/rra.2682 Domec, J. C., Rivera, L. N., King, J. S., Peszlen, I., Hain, F., Smith, B., & Frampton, J. (2013). Hemlock woolly adelgid (Adelges tsugae) infestation affects water and carbon relations of eastern hemlock (Tsuga canadensis) and Carolina hemlock (Tsuga caroliniana). New Phytologist, 199(2), 452–463. https://doi.org/10.1111/nph.12263 Miller, Z., Peszlen, I., & Peralta, P. (2013). Mechanical properties of young transgenic black cottonwood trees modified for reduction of specific genes in lignin biosynthesis. 8th Annual NC State University Graduate Student Research Symposium, 53. Dyk, H., Peralta, P., & PESZLEN, I. L. O. N. A. (2013). Modeling of the mechanical properties of a wood-fiber/bicomponent-fiber composite. BioResources, 8(3), 3672–3684. https://doi.org/10.15376/biores.8.3.3672-3684 Miller, Z., Peralta, P., & Peszlen, I. (2013). Modulus of elasticity of young transgenic black cottonwood modified for specific genes involved in lignin biosynthesis. Forest Products Society 67th & Society of Wood Science and Technology 56th International Convention. Presented at the Forest Products Society 67th & Society of Wood Science and Technology 56th International Convention, Austin, TX, USA. Lu, S., Li, Q., Wei, H., Chang, M.-J., Tunlaya-Anukit, S., Kim, H., … Chiang, V. L. (2013). Ptr-miR397a is a negative regulator of laccase genes affecting lignin content in Populus trichocarpa. Proceedings of the National Academy of Sciences, 110(26), 10848–10853. https://doi.org/10.1073/PNAS.1308936110 Pongor, M., Peralta, P., Peszlen, I., & Domec, J.-C. (2013). Wood quality of loblolly pine (Pinus taeda L.) subjected to elevated atmospheric carbon dioxide. Forest Products Society 67th & Society of Wood Science and Technology 56th International Convention. Forest Products in a Global Sustainable Economy. June 9-11, presented at the Forest Products Society 67th & Society of Wood Science and Technology 56th International Convention, Austin, TX, USA. Xiang, Z., Peralta, P., & Peszlen, I. (2012). Counteracting the effect of shrinkage anisotropy with tensile and compressive set. Forest Products: Solutions for Global Green Economy. Presented at the Forest Products Society 66th International Convention, Washington, DC. Horvath, L., Peszlen, I., Gierlinger, N., Peralta, P., Kelley, S., & Csoka, L. (2012). Distribution of wood polymers within the cell wall of transgenic aspen imaged by Raman microscopy. HOLZFORSCHUNG, 66(6), 717–725. https://doi.org/10.1515/hf-2011-0126 Jackson, B. R., Pongor, M., Peszlen, I., Peralta, P., & Domec, J.-C. (2012). Elevated Atmospheric CO2: Projecting its Impact on Biomass Accumulation and Wood Quality of Loblolly Pine (Pinus taeda L.). Forest Product Society, 66th International Convention. Presented at the Forest Product Society, 66th International Convention, Washington, DC, USA. Jackson, B. R., Pongor, M., Peszlen, I., Peralta, P., & Domec, J.-C. (2012). Elevated CO2 Treatment Effect on Growth Ring Width and Average Density of Loblolly Pine (Pinus taeda L.). Natural Resources Programs and Partnerships at Work Association of Natural Resource Extension Professionals 8th Biennial Conference. Presented at the Natural Resources Programs and Partnerships at Work Association of Natural Resource Extension Professionals 8th Biennial Conference, Hendersonville, NC. Peszlen, I., Peralta, P., Horvath, B., Horvath, L., Xiang, Z., & Csoka, L. (2012). Fiber morphology of aspen and cottonwood affected by the genetic modification of cell wall chemical components. Forest Products: Solutions for Global Green Economy. Presented at the Forest Products Society 66th International Convention, Washington, DC. Pongor, M., Peszlen, I., Peralta, P., & Domec, J.-C. (2012). Free air carbon dioxide enrichment effect on the wood quality of loblolly pine (Pinus taeda L. 7th Annual NC State University Graduate Student Research Symposium. Presented at the 7th Annual NC State University Graduate Student Research Symposium, Raleigh, NC. Xiang, Z. Y., Peralta, P., & Peszlen, I. (2012). Lumber drying stresses and mitigation of cross-sectional deformation. Wood and Fiber Science, 44(1), 94–102. Horvath, L., Peszlen, P., & Peralta, P. (2012). Micromechanical investigation of the interaction between chemical composition and mechanical performance using genetically-modified aspen wood. Forest Products Society 66th International Convention, Forest Products: Solutions for Global Green Economy. Presented at the Forest Products Society 66th International Convention, Forest Products: Solutions for Global Green Economy, Washington, DC. Horvath, L., Peralta, P., Peszlen, I., Csoka, L., Horvath, B., & Jakes, J. (2012). Modeling hygroelastic properties of genetically modified Aspen. Wood and Fiber Science, 44(1), 22–35. Pasztory, Z., Peralta, P. N., Molnar, S., & Peszlen, I. (2012). Modeling the hygrothermal performance of selected North American and comparable European wood-frame house walls. ENERGY AND BUILDINGS, 49, 142–147. https://doi.org/10.1016/j.enbuild.2012.02.003 Csoka, L., Hoeger, I. C., Rojas, O. J., Peszlen, I., Pawlak, J. J., & Peralta, P. N. (2012). Piezoelectric Effect of Cellulose Nanocrystals Thin Films. ACS Macro Letters, 1(7), 867–870. https://doi.org/10.1021/mz300234a Xiang, Z., Peszlen, I., & Peralta, P. (2011). A novel approach to mitigating defects due to wood shrinkage anisotropy. 6th Annual NC State University Graduate Student Research Symposium. Presented at the 6th Annual NC State University Graduate Student Research Symposium, Raleigh, NC. Horvath, L., Peralta, P., Peszlen, I., & Csoka, L. (2011). Computer modeling of the micromechanical properties of transgenic aspen wood. International Scientific Conference on Hardwood Processing. Presented at the International Scientific Conference on Hardwood Processing, Virginia Tech, Blacksburg, VA. Csoka, L., Hoeger, I. C., Peralta, P., Peszlen, I., & Rojas, O. J. (2011). Dielectrophoresis of cellulose nanocrystals and alignment in ultrathin films by electric field-assisted shear assembly. JOURNAL OF COLLOID AND INTERFACE SCIENCE, 363(1), 206–212. https://doi.org/10.1016/j.jcis.2011.07.045 Li, Q., Min, D., Wang, J. P.-Y., Peszlen, I., Horvath, L., Horvath, B., … Chiang, V. L. (2011). Down-regulation of glycosyltransferase 8D genes in Populus trichocarpa caused reduced mechanical strength and xylan content in wood. TREE PHYSIOLOGY, 31(2), 226–236. https://doi.org/10.1093/treephys/tpr008 Giles, R., Peszlen, I., Peralta, P., Chang, H.-M., Farrell, R., Grand, L., & Horvath, B. (2012). Fungal biodegradation of genetically modified and lignin-altered quaking aspen (Populus tremuloides Michx.). HOLZFORSCHUNG, 66(1), 105–110. https://doi.org/10.1515/hf.2011.144 Wegmann, K. W., Lewis, R. Q., Osburn, C. L., Peszlen, I., Starek, M. J., & Mitasova, H. (2011). Legacy Sediments and Stream Water Quality: Estimating Volume, Nutrient Content, and Stream Bank Erosion in 303(d)-Impaired Waterways of the North Carolina Piedmont. Water Resources Research Institute (WRRI) Annual Conference. Presented at the Water Resources Research Institute (WRRI) Annual Conference, Jane S. McKimmon Center, Raleigh, NC. Lewis, R. Q., Wegmann, K. W., & Peszlen, I. (2011). Living Erosion Pins: Exposed Root Dendrochronology and Multi-year Rates of Stream Bank Erosion. Water Resources Research Institute (WRRI) Annual Conference. Presented at the Water Resources Research Institute (WRRI) Annual Conference, Jane S. McKimmon Center, Raleigh, NC. Xiang, Z., Horvath, L., Peralta, P., & Peszlen, I. (2011). Minimizing cupping in red oak using the concept of drying stresses. International Scientific Conference on Hardwood Processing. Presented at the International Scientific Conference on Hardwood Processing, Virginia Tech, Blacksburg, VA. Horvath, B., Peralta, P., Frazier, C., & Peszlen, I. (2011). thermal softening of transgenic aspen. BioResources, 6(2), 2125–2134. Zhouyang, Z., Peszlen, I., & Peralta, P. (2010). Changes in mass, compression strength, and chemical composition of genetically modified aspen during bio-treatment by lignin-selective white-rot fungus. North Carolina State University, 5th Graduate Student Research Symposium. Presented at the North Carolina State University, 5th Graduate Student Research Symposium, Raleigh, North Carolina, USA. Dick, B., Jewell, I., Peszlen, I., & Simon, P. (2010). Determining River Bank and Soil erosion rates from exposed tree roots and the potential uses of Dendrochronology in Water Resources Management. Tennessee American Water Resources Association (TN AWRA). Presented at the Tennessee American Water Resources Association (TN AWRA), Montgomery Bell State Park, Tennessee, USA. Horvath, B., Peszlen, I., Peralta, P., Kasal, B., & Li, L. (2010). EFFECT OF LIGNIN GENETIC MODIFICATION ON WOOD ANATOMY OF ASPEN TREES. IAWA JOURNAL, 31(1), 29–38. https://doi.org/10.1163/22941932-90000003 Horvath, B., Peszlen, I., Peralta, P., Horvath, L., Kasal, B., & Li, L. G. (2010). Elastic modulus determination of transgenic aspen using a dynamic mechanical analyzer in static bending mode. Forest Products Journal, 60(3), 296–300. Horvath, B., Peralta, P., Peszlen, I., Divos, F., Kasal, B., & Li, L. G. (2010). Elastic modulus of transgenic aspen. Wood Research, 55(1), 1–10. Csoka, L., Peralta, P., Peszlen, I., Hoeger, I., & Rojas, O. (2010). Electric field oriented convective assembly of cellulose nanocrystals. 13th International Conference on Organized Molecular Films. Presented at the 13th International Conference on Organized Molecular Films, Quebec City, Canada. Dick, B., Dick, B., Jewell, I., Simon, P., Peszlen, I., & Hey, R. (2010). Evaluating Current and Historic River Bank Erosion Using Exposed Tree Roots of Eastern Hardwood Species. 2010 Land Grant and Sea Grant - National Water Conference. Presented at the 2010 Land Grant and Sea Grant - National Water Conference, Hilton Head Island, SC. Lyons, N. J., Mitasova, H., Peszlen, I., & Wegmann, K. W. (2010). Geospatial Determination of Potential Hillslope Response to an Invasive Species in the Southern Appalachians. 41st International Binghamton Geomorphology Symposium (BGS), Geospatial Technologies & Geomorphological Mapping, 15–17, Horvath, L., Peszlen, I., Peralta, P., Kasal, B., & Li, L. G. (2010). Mechanical properties of genetically engineered young aspen with modified lignin content and/or structure. Wood and Fiber Science, 42(3), 310–317. Horvath, L., Peszlen, I., & Peralta, P. (2010). Micromechanical modeling of the cell wall of genetically modified aspen (Populus tremuloides) wood. North Carolina State University, 5th Graduate Student Research Symposium. Presented at the North Carolina State University, 5th Graduate Student Research Symposium, Raleigh, North Carolina, USA. Pasztory, Z., Peralta, P. N., & Peszlen, I. (2011). Multi-layer heat insulation system for frame construction buildings. ENERGY AND BUILDINGS, 43(2-3), 713–717. https://doi.org/10.1016/j.enbuild.2010.11.016 Csoka, L., Varga, B., Horvath, M., & Peszlen, I. (2010). Pulping of wavelet transform analyzed black locust juvenile and mature wood. Hardwood Science and Technology - The 4th Conference on Hardwood Research and Utilization in Europe. Presented at the Hardwood Science and Technology - The 4th Conference on Hardwood Research and Utilization in Europe, Sopron, Hungary. Saralde, T. C., Peralta, P. N., Peszlen, I., & Horvath, B. (2010). Technical note: Shrinkage properties of partially cad-deficient loblolly pine lumber. Wood and Fiber Science, 42(1), 117–119. Rivera, L. N., Domec, J.-C., Frampton, J., Hain, F., Peszlen, I., & King, J. S. (2010). The Effect of Hemlock Woolly Adelgid (HWA) Infestation on Water Relations of Carolina and Eastern Hemlock: Can Ecophysiological Investigation of Tree Water Relations Improve Silvicultural Management of the HWA? 5th Hemlock Woolly Adelgid Symposium. Presented at the 5th Hemlock Woolly Adelgid Symposium, Asheville, North Carolina, USA. Csoka, L., Peralta, P., Peszlen, I., Hoeger, I., & Rojas, O. (2010). Ultra Thin Films of Oriented Cellulose Nanocrystals by Electric Field-Assisted Convective Assembly. 2010 TAPPI International Conference on Nanotechnology for the Forest Product Industry. Presented at the 2010 TAPPI International Conference on Nanotechnology for the Forest Product Industry, Helsinki, Finland. Horvath, L., Peszlen, I., Peralta, P., & Kelley, S. (2011). Use of transmittance near-infrared spectroscopy to predict the mechanical properties of 1-and 2-year-old transgenic aspen. WOOD SCIENCE AND TECHNOLOGY, 45(2), 303–314. https://doi.org/10.1007/s00226-010-0330-x Dyk, H., Peralta, P., PESZLEN, I. L. O. N. A., & Banks-Lee, P. (2009). An innovative wood-fiber composite incorporating nonwoven textile technologies. Forest Products Journal, 59(11-12), 11–17. https://doi.org/10.13073/0015-7473-59.11.11 Peszlen, I., Horvath, B., Peralta, P., Kasal, B., & Li, L. (2009). Anatomical Structure of Transgenic Aspen Trees. Experimental and computational methods in wood micromechanics Workshop. Presented at the Experimental and computational methods in wood micromechanics Workshop, Vienna, Austria. Horvath, L., Peszlen, I., Peralta, P., Kelley, S., Kasal, B., & Li, L. (2009). Application of Near-Infrared Spectroscopy to Predict Mechanical Properties of Transgenic Aspen. Forest Product Society, 63rd International Convention. Presented at the Forest Product Society, 63rd International Convention, Boise, Idaho, USA. Strayhorn, T., Peraltayler, P., & Peszlen, I. (2009). Bioconversion Using Artificial Soil Matrices. 18th Annual North Carolina State University Undergraduate Research Symposium. Presented at the 18th Annual North Carolina State University Undergraduate Research Symposium, Raleigh, NC. Dick, B., Jewell, I., Simon, P., Peszlen, I., & Hey, R. (2009). Dendrogeomorphic Methods of Using Exposed Roots for Relating BEHI and Near Bank Stress to Evaluate Stream Bank Erodibility. 3rd National Conference on Ecosystem Restoration. Presented at the 3rd National Conference on Ecosystem Restoration, Los Angeles, CA. Dick, B., Jewell, I., Peszlen, I., Hey, R., & Simon, P. (2009). Determining River Bank Erosion rates for the Prediction of Stream Bank Erodibility Using Dendrogeomorphic Methods and Exposed Tree Roots. 25th Annual International Conference on Soils, Sediments, Water and Energy. Presented at the 25th Annual International Conference on Soils, Sediments, Water and Energy, University of Massachusetts, Amherst, MA, USA. Horvath, B., Peralta, P., Peszlen, I., Kasal, B., & Li, L. (2009). Effect of Lignin on the Thermo-Mechanical Properties of Transgenic Aspen. Experimental and computational methods in wood micromechanics Workshop. Presented at the Experimental and computational methods in wood micromechanics Workshop, Vienna, Austria. Horvath, L., Peszlen, I., Peralta, P., Kelley, S., Kasal, B., & Li, L. (2009). Mechanical Properties of Transgenic Aspen with Reduced Lignin Content and Increased S/G Ratio. Experimental and computational methods in wood micromechanics Workshop. Presented at the Experimental and computational methods in wood micromechanics Workshop, Vienna, Austria. Horvath, L., Peralta, P., & Peszlen, I. (2009). Prediction of the Mechanical Properties of Young Genetically Modified Aspen Trees using Near-Infrared Spectroscopy. North Carolina State University, 4th Graduate Student Research Symposium. Presented at the North Carolina State University, 4th Graduate Student Research Symposium, Raleigh, North Carolina, USA. Peszlen, I., Horvath, B., Peralta, P., Kasal, B., Li, L., & Horvath, L. (2009). Property Evaluation of Genetically Engineered Wood from Aspen with Down-regulated Lignin Content. Forest Biotechnology Industry Research Consortium Annual Meeting. Presented at the Forest Biotechnology Industry Research Consortium Annual Meeting, Raleigh, NC. Horvath, B., Horvath, L., Peralta, P., Peszlen, I., Kasal, B., & Li, L. (2009). Thermo-Mechanical Properties of Genetically Engineered Populus Tremuloides Clone. Forest Product Society, 63rd International Convention. Presented at the Forest Product Society, 63rd International Convention, Boise, Idaho. Horvath, B., Peszlen, I., & Peralta, P. (2009). Thermo-mechanical Properties of Transgenic Aspen. Forest Biotechnology Industry Research Consortium Annual Meeting. Presented at the Forest Biotechnology Industry Research Consortium Annual Meeting, Raleigh, NC. Quanzi, L., Peszlen, I., & Chang, H. (2009). Transgenic trees with dwarf and brittle-wood phenotypes: Correlation of genetic functions of cellulose synthase genes with tree growth and wood mechanical properties. Forest Biotechnology Industry Research Consortium Annual Meeting. Presented at the Forest Biotechnology Industry Research Consortium Annual Meeting, Raleigh, NC. Peralta, P., & Peszlen, I. (2009). Viscoelastic Properties of Genetically Engineered Aspen. Forest Biotechnology Industry Research Consortium Annual Meeting. Presented at the Forest Biotechnology Industry Research Consortium Annual Meeting, Raleigh, NC. Peszlen, I., Peralta, P., Horvath, B., Horvath, L., Kasal, B., & Li, L. (2008). Anatomical and mechanical properties of genetically engineered aspen wood. Genes to Products: Agricultural Plant, Microbe, & Biobased Product Research. Presented at the Genes to Products: Agricultural Plant, Microbe, & Biobased Product Research, USDA CSREES Competitive Programs Unit, Bethesda, MD. Horvath, B., Horvath, L., Peralta, P., & Peszlen, I. (2008). Comparative study of micromechanical testing and dynamic mechanical analysis of young poplar trees. Forest Product Society, 62nd International Convention. Presented at the Forest Product Society, 62nd International Convention, St. Louis, MO. Giles, R., Peszlen, P., & Peralta, P. (2008). Decay resistance of genetically modified quaking aspen. Forest Product Society, 62nd International Convention. Presented at the Forest Product Society, 62nd International Convention, St. Louis, MO. Mendoza, E., Horvath, B., Peralta, P., & Peszlen, I. (2008). Dynamic Mechanical Analysis of Genetically Modified Aspen. 17th Annual NC State Undergraduate Research Spring Symposium. Presented at the 17th Annual NC State Undergraduate Research Spring Symposium, Raleigh, NC. Peszlen, I., Horvath, B., Peralta, P., Kasal, B., & Li, L. (2008). Effect of lignin on wood formation in transgenic aspen trees. EuroDendro Conference. Presented at the EuroDendro Conference, Hallsatt, Austria. Peszlen, I., Horvath, B., Peralta, P., Kasal, B., & Li, L. (2008). Fiber characteristics of young aspen trees and their significance as paper fiber resources. Forest Product Society, 62nd International Convention. Presented at the Forest Product Society, 62nd International Convention, St. Louis, MO. Van Dyk, H., Peralta, P., & Peszlen, I. (2008). Mechanical and physical properties of a wood fiber composite reinforced using nonwoven textile technologies. Bonding of Timber Conference. Presented at the Bonding of Timber Conference, Sopron, Hungary. Mechanical properties of lumber from partially cad-deficient loblolly pine (Pinus taeda). (2008). Wood and Fiber Science, 40(4), 657–662. Horvath, B., Horvath, L., Peralta, P., Peszlen, I., & Kasal, B. (2008). Micromechanical and Dynamic Mechanical Testing of Young Transgenic Trees. 3rd Annual NC State Graduate Student Research Symposium. Presented at the 3rd Annual NC State Graduate Student Research Symposium, Raleigh, NC. Horvath, B., Peralta, P., & Peszlen, I. (2008). Nondestructive Assessment of the Mechanical Properties of Transgenic Aspen. North Carolina State University, 4th Graduate Student Research Symposium. Presented at the North Carolina State University, 4th Graduate Student Research Symposium, Raleigh, North Carolina. Horvath, L., Hantos, Z., Peszlen, I., & Peralta, P. (2008). Static Design of a Skating Rink Using Glued-Laminated Timber Construction. Forest Product Society, 62nd International Convention. Presented at the Forest Product Society, 62nd International Convention, St. Louis, MO. Molnar, S., Peszlen, I., & Pauko, A. (2008). Wood Anatomy. Budapest: Szaktudas Kiado Haz Zrt. Horvath, B., Kovacs, Z., Peralta, P., & Peszlen, I. (2007). Analysis of traditional wooden window joints with three different methods. Forest Product Society, 61st International Convention. Presented at the Forest Product Society, 61st International Convention, Knoxville, Tennessee. Van Dyk, H., Peralta, P., & Peszlen, I. (2007). Development of Engineered Wood Composites with Nonwoven Textile Technology. Forest Product Society, 61st International Convention. Presented at the Forest Product Society, 61st International Convention, Knoxville, Tennessee. Peszlen, I., Peralta, P., Li, L., & Kasal, B. (2007). Fiber morphology of genetically engineered aspen. Forest Product Society, 61st International Convention. Presented at the Forest Product Society, 61st International Convention, Knoxville, Tennessee. Saralde, T., Peralta, P., Peszlen, I., Kasal, B., Bangi, A., & Horvath, B. (2007). Mechanical Properties of lumber from partially CAD-deficient loblolly pine (Pinus taeda). Forest Product Society, 61st International Convention. Presented at the Forest Product Society, 61st International Convention, Knoxville, Tennessee. Kasal, B., Peszlen, I., Peralta, P., & Li, L. (2007). Preliminary tests to evaluate the mechanical properties of young trees with small diameter. HOLZFORSCHUNG, Vol. 61, pp. 390–393. https://doi.org/10.1515/HF.2007.054 Peszlen, I., Peralta, P., Kasal, B., Li, L., & Horvath, B. (2007). Variation in vessel and fiber morphology of genetically engineered aspen. Forest Product Society, 61st International Convention. Presented at the Forest Product Society, 61st International Convention, Knoxville, Tennessee. Peszlen, I. (2007). Variation of Microfibril Angle in Young Eucalyptus Trees - Testing Methodology and Preliminary Data Generation. NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC. Saralde, T., Peralta, P., Peszlen, I., & Bangi, A. (2006). Mechanical property evaluation of CAD-deficient loblolly pines. Forest Products Society, 60th International Convention. Presented at the Forest Products Society, 60th International Convention, Newport Beech, California. Saralde, T., Peralta, P., Peszlen, I., Kasal, B., Li, L., & Bangi, A. (2006). Preliminary results of the property evaluation of genetically engineered aspen. Forest Products Society, 60th International Convention. Presented at the Forest Products Society, 60th International Convention, Newport Beach, California. Peszlen, I., Kasal, B., Peralta, P., & Li, L. (2006). Screening wood and fiber properties of genetically engineered young trees. Third EPSO Conference: Plant Dynamics: from Molecules to Ecosystems. Presented at the Third EPSO Conference: Plant Dynamics: from Molecules to Ecosystems, Visegrad, Hungary. Kasal, B., Peszlen, I., Peralta, P., & Li, L. (2006). Test methods to determine properties of small-diamter genetically altered material. 7th World Congress on Computational Mechanics - Mechanical and Physical Properties of Wood and Wood Based Materials. Presented at the 7th World Congress on Computational Mechanics - Mechanical and Physical Properties of Wood and Wood Based Materials, Los Angeles, California. Peralta, P., Peszlen, I., Li, L., & Kasal, B. (2006). Transgenic as surrogate materials for understanding wood biophysics. NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC. Peszlen, I. (2006). Variation in anatomical properties of genetically engineered wood from aspen with down-regulated lignin. NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC. Peszlen, I. (2006). Variation of Microfibril Angle in Young Eucalyptus Trees - Testing Methodology and Preliminary Data Generation. NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC. Peszlen, I. (2005). Anatomical Properties of Genetically Engineered Wood from Aspen with Down-regulated Lignin. NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC. Yeh, T. F., Goldfarb, B., Chang, H. M., Peszlen, I., Braun, J. L., & Kadla, J. F. (2005). Comparison of morphological and chemical properties between juvenile wood and compression wood of loblolly pine. HOLZFORSCHUNG, 59(6), 669–674. https://doi.org/10.1515/hf.2005.107 Xiaoqiang, X., Kasal, B., Peralta, P., & Peszlen, I. (2005). Methodology Development for Testing the Properties of Wood From Genetically Engineered Aspen. Forest Products Society, 59th International Convention. Presented at the Forest Products Society, 59th International Convention, Quebec City, Canada. Yeh, T.-F., Goldfarb, B., Chang, H.-M., Peszlen, I., & Kadla, J. F. (2005). New Insights into the Similarities between Juvenile Wood and Compression Wood in Loblolly Pine. 59th Appita Annual Conference and Exhibition: Incorporating the 13th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry). Presented at the 59th Appita Annual Conference and Exhibition: Incorporating the 13th ISWFPC (International Symposium on Wood, Fibre and Pulping Chemistry), Auckland, New Zealand. Kasal, B., Peszlen, I., & Peralta, P. (2005). Relationship between genetic markers and mechanical properties of genetically improved solid wood – testing methodology and preliminary data generation. NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC. Peszlen, I. (2004). Effects of Environment and Genetics on Wood Quality. NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting. Presented at the NCSU Forest Biotechnology Industrial Research Consortium (FORBIRC) Annual Meeting, Raleigh, NC. Hall, R. B., Peszlen, I., & Doungpet, M. (2004). Finding New Strategies for the Genetic Improvement of Populus Wood Quality. 2004 IUFRO Forest Genetic Conference: Forest Genetics and Tree Breeding in the Age of Genomics: Progress and Future. Presented at the 2004 IUFRO Forest Genetic Conference: Forest Genetics and Tree Breeding in the Age of Genomics: Progress and Future, Charleston, SC. Hall, R. B., Peszlen, I., & Stokke, D. D. (2004). Genetic and Environmental Interactions in Growth Rates and Wood Quality. Forest Products Society, 58th Annual Meeting. Presented at the Forest Products Society, 58th Annual Meeting, Grand Rapids, MI. Peszlen, I., Molnar, S., & Varga, F. (2004). Resistance of Juvenile and Mature Wood of Black Locust to Fungal Decay. Forest Products Society, 58th Annual Meeting. Presented at the Forest Products Society, 58th Annual Meeting, Grand Rapids, MI. Molnár, S., Peszlen, I., Führer, E., & Fehér, S. (2003). Wood Quality of Poplars in Hungary. IUFRO All Division 5 Conference. Presented at the IUFRO All Division 5 Conference, Rotorua, New Zealand. Peszlen, I., & Paukó, A. (2002). Development and properties of reaction wood - Compression wood II. Magyar Asztalos És Faipar, 12, 152–153. Peszlen, I., & Pauko, A. (2002). Development and properties of reaction wood - Tension wood. Magyar Asztalos És Faipar, 2002(1), 140–143. Molnar, S., Varga, M., Peszlen, I., & Feher, S. (2002). Investigation of Respirable Range of Hardwood Dust. Technical Forum Presentation, Forest Products Society 56th Annual Meeting. Presented at the Technical Forum Presentation, Forest Products Society 56th Annual Meeting, Madison, Wisconsin, USA. Molnar, S., Peszlen, I., Nemeth, R., Feher, S., & Varga, M. (2002). Modeling the Wood Chain for Red Heart Beech. Technical Forum Presentation, Forest Products Society, 56th Annual Meeting. Presented at the Technical Forum Presentation, Forest Products Society, 56th Annual Meeting, Madison, Wisconsin, USA. Peszlen, I., & Paukó, A. (2001). Development and properties of reaction wood - Compression wood I. Magyar Asztalos És Faipar, 2001(11), 134–135. Peszlen, I., & Hall, R. B. (2001). Genetic and environmental interaction on Populus specific gravity. Wood Breeding & Biotechnology Conference. Presented at the Wood Breeding & Biotechnology Conference, Bordeaux, France. Peszlen, I., Molnar, S., Nemeth, R., Varga, M., & Takáts, P. (2001). Industrial distribution of wood resources in Hungary. Wood Properties for Industrial Use - 5th Workshop. Presented at the Wood Properties for Industrial Use - 5th Workshop, Oslo, Norway. Hall, R. B., Hart, E. R., & Peszlen, I. (2001). Modifying Populus Environmental Responses: Impacts on Wood Quantity and Quality. In N. Morohoshi & A. Komamaine (Eds.), Molecular Breeding of Woody Plants (pp. 229–238). https://doi.org/10.1016/s0921-0423(01)80077-0 Peszlen, I. (2000). Bark. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook (pp. 50–51). Sopron: Faipari Tudományos Alapítvány. Peszlen, I. (2000). Cell wall. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook) (pp. 37–40). Sopron: Faipari Tudományos Alapítvány. Peszlen, I., Rédei, K., & Molnár, S. (2000). Distribution and Importance of black locust in Hungary. Technology for High Quality Products from Black Locust Conference. Presented at the Technology for High Quality Products from Black Locust Conference, Bugac, Hungary. Peszlen, I. (2000). Macroscopic characteristics. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook) (pp. 46–50). Sopron: Faipari Tudományos Alapítvány. Peszlen, I. (2000). Microscopic structure. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook) (pp. 40–46). Sopron: Faipari Tudományos Alapítvány. Peszlen, I., Varga, F., & Molnár, S. (2000). Resistance of untreated and steamed black locust to fungal decay. Technology for High Quality Products from Black Locust Conference. Presented at the Technology for High Quality Products from Black Locust Conference, Bugac, Hungary. Peszlen, I. (2000). Wood Structure and Properties - The living tree. In S. Molnár (Ed.), Faipari Kézikönyv (Wood Handbook) (pp. 29–32). Sopron: Faipari Tudományos Alapítvány. Marosvölgyi, B., Peszlen, I., & Tamás, R. (2000). Wood for Energy and its Impact on the Environment. Forest Products Society 54th Annual Meeting. Presented at the Forest Products Society 54th Annual Meeting, South Lake Tahoe, Nevada, USA. Peszlen, I., Szojakné Török, K., Nemeth, R., & Paukó, A. (2000). Wood properties in Picea abies clones. Forest Products Society 54th Annual Meeting. Technical Forum presented at the Forest Products Society 54th Annual Meeting, South Lake Tahoe, Nevada, USA. Peszlen, I., Marosvölgyi, B., & Tamás, R. (2000). Wood quality and utilization perspectives of selected poplar clones for biomass energy in Hungary. 21st Session of the International Poplar Commission (IPC 2000). Presented at the 21st Session of the International Poplar Commission (IPC 2000), Portland, Oregon, USA. Peszlen, I., & Molnár, S. (2000). Wood structure and properties that affect production from black locust. Technology for High Quality Products from Black Locust Conference. Presented at the Technology for High Quality Products from Black Locust Conference, Bugac, Hungary. Molnar, S., Peszlen, I., Tolvaj, L., & Varga, F. (1999). Selected Wood Properties of Black locust (Robinia pseudoacacia) affected by steaming. Proceedings of the Forest Product Society 53rd Annual Meeting, 40. Peszlen, I. (1999). Within-tree and between-tree variation of selected wood propereties in Pinus sylvestris clones. Presented at the Habilitation Presentation, University of Sopron, Sopron, Hungary. Peszlen, I., Molnar, S., Tolvaj, L., & Varga, F. (1999). Wood properties of black locust - a species of the future. Proceedings of the Wood Properties for Industrial Use - 2nd Workshop, 54. Molnár, S., Peszlen, I., & Szojákné Török, K. (1999). Wood quality of poplar and pine plantations in Hungary. Magyar Asztalos, 99(4), 156–157. Peszlen, I. (1999). Újabb kutatási eredmények az akác minőségi feldolgozásához. [Investigation of quality production from black locust wood]. Hungarian Academy of Science, Agricultural Committee, Forestry Section, III. National Meeting on Forestry, Wildlife and Forest Products Industry. Presented at the Hungarian Academy of Science, Agricultural Committee, Forestry Section, III. National Meeting on Forestry, Wildlife and Forest Products Industry, Budapest, Hungary. Peszlen, I., Matyas, C., Varga, G., & Szojákné Török, K. (1998). Dry matter allocation and wood quality in relation to spacing in Scots pine clone trial. In I. Peszlen (Ed.), Environment and Wood Science, Acta Facultatis Ligniensis 1998 (pp. 15–22). Sopron, Hungary: University of Sopron. Peszlen, I., Mátyás, C., Varga, G., & Szojákné Török, K. (1998). Effect of spacing on biomass production and wood properties for Pinus sylvestris clones. 3rd International Symposium on Wood Structure and properties'98. Presented at the 3rd International Symposium on Wood Structure and properties'98, Zvolen, Slovakia. Peszlen, I., Mátyás, C., Varga, G., & Szojákné Török, K. (1998). Effect of spacing on dry matter poduction in a Scots pine clone trial. Environment and Wood Science Jubilee Conference. Presented at the Environment and Wood Science Jubilee Conference, Sopron, Hungary. Varga, G., Peszlen, I., Szojákné Török, K., & Matyas, C. (1998). Effect of spacing on wood in Scots pine plantations. FAIPAR, XLVI(1), 33–35. Peszlen, I. (1998). Environment and Wood Science. In Acta Facultatis Ligniensis. Sopron, Hungary: University of Sopron. Peszlen, I. (1998). Faanyagvizsgálati módszerek. [Wood testing methods.]. Hungarian Academy of Science, Veszprém Regional Committee and the Industrial Archeology and Archeometry Working Group Meeting. Presented at the Hungarian Academy of Science, Veszprém Regional Committee and the Industrial Archeology and Archeometry Working Group Meeting, Veszprém, Hungary. Varga, G., Peszlen, I., Szojákné Török, K., & Mátyás, C. (1998). Influence of spacing on wood quality of Pinus sylvestris. Conference on Recent Advances in the Wood Industry. Presented at the Conference on Recent Advances in the Wood Industry, Sopron, Hungary. Molnár, S., Peszlen, I., Richter, H. G., Tolvaj, L., & Varga, F. (1998). Influence of steaming on selected wood properties of black locust (Robinia pseudoacacia L.). Environment and Wood Science Jubilee Conference. Presented at the Environment and Wood Science Jubilee Conference, Sopron, Hungary. Molnár, S., Peszlen, I., Richter, H. G., Tolvaj, L., & Varga, F. (1998). Influence of steaming on selected wood properties of black locust (Robinia pseudoacacia L.). In I. Peszlen (Ed.), Environment and Wood Science, Acta Facultatis Ligniensis 1998 (pp. 38–45). Sopron, Hungary: University of Sopron. Peszlen, I., Molnár, S., & Varga, F. (1998). Latest results of investigation on black locust wood. FAIPAR, XLVI(2), 21–22. Molnar, S., Peszlen, I., Tolvaj, L., & Varga, F. (1998). Utilization of black locust in the furniture industry. International Furniture Research Conference. Presented at the International Furniture Research Conference, Sydney, Australia. Peszlen, I. (1998). Variation in specific gravity and mechanical properties of poplar clones. Drevársky Vyskum - Wood Research, 43(2), 1–17. Butterfield, B., Meylan, B., & Peszlen, I. (1997). A fatest háromdimenziós szerkezete – Three Dimensional Structure of Wood (English - Hungarian Edition.). Budapest: Faipari Tudományos Alapítvány. Matyas, C., & Peszlen, I. (1997). Early testing of Populus clones based on juvenile-mature correlation of their anatomical properties. Silvae Genetica, 46(2-3), 64–72. Peszlen, I. (1996). Juvenile wood quality in connection to reaction wood of hardwoods. ICWSF'96, 2nd International Conference on the Development of Wood Science, Technology and Forestry, 10–12. Peszlen, I., & Molnár, S. (1996). Technological parameters of poplars grown in Hungary. Bútor & Faipar II, 1996(11-12), 26–28. Peszlen, I., & Molnár, S. (1996). Wood properties of Hungarian poplar clones. IPC’96, Environmental and Social Issues in Poplar and Willow Cultivation and Utilization. 20th Session of FAO International Poplar Commission. Presented at the IPC’96, Environmental and Social Issues in Poplar and Willow Cultivation and Utilization. 20th Session of FAO International Poplar Commission, Budapest, Hungary. Peszlen, I. (1995). Juvenile wood characteristics of plantation wood. IUFRO XX. World Congress. Invited paper. IUFRO XX. presented at the IUFRO XX. World Congress, Tampere, Finland. Ifju, G., & Peszlen, I. (1994). Application of stereology in quantitative anatomy. FAIPAR (Wood Industry), XLIV(2), 13–21. Peszlen, I. (1994). Gelatinous fibers in Populus x euramericana clones. In L. A. Donaldson, A. P. Singh, B. G. Butterfield, & L. J. Whitehouse (Eds.), Recent Advances in Wood Anatomy (pp. 327–333). Rotorua, New Zealand: New Zealand Forest Research Institute. Peszlen, I. (1994). Influence of Age on Selected Anatomical Properties of Populus Clones. IAWA Journal, 15(3), 311–321. https://doi.org/10.1163/22941932-90000613 Peszlen, I. (1993). Effect of site and clone on variation of anatomical properties of Populus x euramericana clones. Wood as a Raw material of the Future Conference, EFE - FATE - Ligno Novum. Presented at the Wood as a Raw material of the Future Conference, EFE - FATE - Ligno Novum, Sopron. Peszlen, I. (1993). Wood quality of plantation-grown poplars. Conference on The Globalization of Wood: Supply, Processes, Products, and Markets. Presented at the Conference on The Globalization of Wood: Supply, Processes, Products, and Markets, Forest Products Society, Portland, Oregon. Peszlen, I. (1993). Zselatinos rostok elôfordulása - Incidence of gelatinous fibers. Scientific Conference of the University of Forestry and Wood Sciences. Presented at the Scientific Conference of the University of Forestry and Wood Sciences, Sopron. Peszlen, I. (1989). Microscopic and macroscopic structure and identification of indigenous industrial woods of Hungary. Sopron: University of Forestry and Wood Sciences. Molnar, S., Gencsi, L., Babos, K., & Peszlen, I. (1986). Age-dependent variation in structural and quality parameters of black locust wood. Scientific Journal of the University of Forestry & Wood Sciences. Peszlen, I. (1985). Selected attributes of the applicants and students admitted to forestry and forest products related educational programs. Felsőoktatási Szemle (Chronicle of Higher Education), 1985(7-8). Hargitai, L., & Peszlen, I. (1982). Wearing test of the edge stability of frame saw blades hardened by swaging and induction hardening. Scientific Journal of the University of Forestry & Wood Sciences.