Juei Feng Tu

A novel auto-gaping magnetic pole system for inner surface finishing of non-circular pipes using magnetic abrasive finishing process

Heng, L., Tu, J. F., Im, H., Kim, H.-J., Chanchamnan, S., Kim, J. S., & Mun, S. D. (2023, June 10). Journal of Magnetism and Magnetic Materials.

Digital Synthesis of Realistically Clustered Carbon Nanotubes

Susi, B. T., & Tu, J. F. (2022, June 22). C – Journal of Carbon Research.

Laser Spot Welding and Electric Contact Points Using Copper/Single-Walled Carbon Nanotube Nanocomposite Synthesized by Laser Surface Implanting

Tu, J. F., Rajule, N., & Mun, S. D. (2021, March 22). Journal of Composites Science.

Fabrication of precision meso-scale diameter ZrO2 ceramic bars using new magnetic pole designs in ultra-precision magnetic abrasive finishing

Heng, L., Kim, J. S., Tu, J.-F., & Mun, S. D. (2020, April 6). Ceramics International.

Novel Characterizations of Mechanical Properties for a Copper/Single-Walled Carbon Nanotube Nanocomposite Synthesized by Laser Surface Implanting

Tu, J. F., Rajule, N., & Mun, S. D. (2020, February 29). C – Journal of Carbon Research.

Correction to: Effect of the Magnetic Pole Arrangement on the Surface Roughness of STS 304 by Magnetic Abrasive Machining

Yin, C., Tu, J.-F., Lee, J. H., Yang, G. E., & Mun, S. D. (2019, May 22). International Journal of Precision Engineering and Manufacturing.

Difficult Engineering Concepts Better Explained

Feasibility Study of Microneedle Fabrication from a thin Nitinol Wire Using a CW Single-Mode Fiber Laser

Tu, J., & Reeves, N. (2019, January 1). Open Engineering.

Molecular dynamics simulations of the wetting behavior of carbon nanotubes in liquid copper

Susi, B. T., & Tu, J. F. (2018, June 14). Computers & Fluids.

Laser synthesis of a copper–single-walled carbon nanotube nanocomposite via molecular-level mixing and non-equilibrium solidification

Tu, J. F., Rajule, N., Molian, P., & Liu, Y. (2016, November 9). Journal of Physics D Applied Physics.

Nanostructure diffraction analysis of a copper/single walled carbon nanotube nanocomposite synthesized by Laser Surface Implanting

Tu, J. F., Rajule, N., Liu, Y., & Martin, J. (2016, November 12). Carbon, Vol. 113, pp. 1–9.

Regulation in free amino acid profile and protein synthesis pathway of growing pig skeletal muscles by low-protein diets for different time periods1,2

Journal of Animal Science, 94(12), 5192–5205.

Effect of the magnetic pole arrangement on the surface roughness of STS 304 by magnetic abrasive machining

Yoon, S., Tu, J.-F., Lee, J. H., Yang, G. E., & Mun, S. D. (2014, July 1). International Journal of Precision Engineering and Manufacturing.

Experimental characterization of a micro-hole drilling process with short micro-second pulses by a CW single-mode fiber laser

Optics and Lasers in Engineering, 55, 275–283.

Low-temperature evaporative glass scoring using a single-mode ytterbium fiber laser

Tu, J. F., & Riley, P. E. B. (2013, February 14). Optics and Lasers in Engineering.

Fatigue crack fusion in thin-sheet aluminum alloys AA7075-T6 using low-speed fiber laser welding

Tu, J. F., & Paleocrassas, A. G. (2010, September 13). Journal of Materials Processing Technology.

Inherent instability investigation for low speed laser welding of aluminum using a single-mode fiber laser

Paleocrassas, A. G., & Tu, J. F. (2010, April 13). Journal of Materials Processing Technology.

A Practical method for determining the beam profile near the focal spot

Harp, W. R., Paleocrassas, A. G., & Tu, J. F. (2007, July 19). The International Journal of Advanced Manufacturing Technology.

Development of a localized heat treatment system for shape memory alloy wires using an ytterbium fiber laser

Dennis, R. S., & Tu, J. F. (2007, August 20). Journal of Materials Processing Technology.

Laser ablation using a long-pulsed, high-fluence, CW single-mode fiber laser

Harp, W. R., Dilwith, J. R., & Tu, J. F. (2007, July 2). Journal of Materials Processing Technology.

Low-speed laser welding of aluminum alloy 7075-T6 using a 300-W,single-mode, ytterbium fiber laser

Welding Journal, 86(6), 179S–186.

Model-Based Design of Motorized Spindle Systems to Improve Dynamic Performance at High Speeds

Journal of Manufacturing Processes, 9(2), 94–108.

Evaluating tolerances and process capability when using truncated probability density functions

Sweet, A. L., & Tu, J. F. (2006, March 13). International Journal of Production Research.

Tolerance design for the fit between bore and shaft for precision assemblies with significant error-scaling problems

Sweet, A. L., & Tu, J. F. (2006, October 27). International Journal of Production Research.

A new method to quantify radial error of a motorized end-milling cutter/spindle system at very high speed rotations

Nakkiew, W., Lin, C.-W., & Tu, J. F. (2005, August 30). International Journal of Machine Tools and Manufacture.

Robust Control of High Speed End Milling with Unknown Process Parameter and CNC Delay

Tu, J. F., Corless, M., & Jeppsson, J. (2003, December 22). Journal of Aerospace Engineering.