Juei Tu

Heng, L., Tu, J. F., Im, H., Kim, H.-J., Chanchamnan, S., Kim, J. S., & Mun, S. D. (2023). A novel auto-gaping magnetic pole system for inner surface finishing of non-circular pipes using magnetic abrasive finishing process. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 580. https://doi.org/10.1016/j.jmmm.2023.170909

Susi, B. T., & Tu, J. F. (2022). Digital Synthesis of Realistically Clustered Carbon Nanotubes. C-JOURNAL OF CARBON RESEARCH, 8(3). https://doi.org/10.3390/c8030034

Tu, J. F., Rajule, N., & Mun, S. D. (2021). Laser Spot Welding and Electric Contact Points Using Copper/Single-Walled Carbon Nanotube Nanocomposite Synthesized by Laser Surface Implanting. JOURNAL OF COMPOSITES SCIENCE, 5(3). https://doi.org/10.3390/jcs5030087

Tu, J. F. (2020). Difficult Engineering Concepts Better Explained. https://doi.org/10.1142/11652

Heng, L., Kim, J. S., Tu, J.-F., & Mun, S. D. (2020). Fabrication of precision meso-scale diameter ZrO2 ceramic bars using new magnetic pole designs in ultra-precision magnetic abrasive finishing. CERAMICS INTERNATIONAL, 46(11), 17335–17346. https://doi.org/10.1016/j.ceramint.2020.04.022

Tu, J. F., Rajule, N., & Mun, S. D. (2020). Novel Characterizations of Mechanical Properties for a Copper/Single-Walled Carbon Nanotube Nanocomposite Synthesized by Laser Surface Implanting. C-JOURNAL OF CARBON RESEARCH, 6(1). https://doi.org/10.3390/c6010010

Yin, C., Tu, J.-F., Lee, J. H., Yang, G. E., & Mun, S. D. (2019, June). Effect of the Magnetic Pole Arrangement on the Surface Roughness of STS 304 by Magnetic Abrasive Machining (vol 15, pg 1275, 2014). INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, Vol. 20, pp. 1069–1069. https://doi.org/10.1007/s12541-019-00158-1

Tu, J., & Reeves, N. (2019). Feasibility Study of Microneedle Fabrication from a thin Nitinol Wire Using a CW Single-Mode Fiber Laser. OPEN ENGINEERING, 9(1), 167–177. https://doi.org/10.1515/eng-2019-0023

Susi, B. T., & Tu, J. F. (2018). Molecular dynamics simulations of the wetting behavior of carbon nanotubes in liquid copper. COMPUTERS & FLUIDS, 172, 19–28. https://doi.org/10.1016/j.compfluid.2018.06.004

Tu, J. F., Rajule, N., Liu, Y., & Martin, J. (2017). Nanostructure diffraction analysis of a copper/single walled carbon nanotube nanocomposite synthesized by Laser Surface Implanting. CARBON, 113, 1–9. https://doi.org/10.1016/j.carbon.2016.11.004

Tu, J. F., Rajule, N., Molian, P., & Liu, Y. (2016). Laser synthesis of a copper-single-walled carbon nanotube nanocomposite via molecular-level mixing and non-equilibrium solidification. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 49(49). https://doi.org/10.1088/0022-3727/49/49/495301

Li, Y. H., Wei, H. K., Li, F. N., Kim, S. W., Wen, C. Y., Duan, Y. H., … Yin, Y. L. (2016). Regulation in free amino acid profile and protein synthesis pathway of growing pig skeletal muscles by low-protein diets for different time periods1,2. Journal of Animal Science, 94(12), 5192–5205. https://doi.org/10.2527/jas.2016-0917

Yoon, S., Tu, J.-F., Lee, J. H., Yang, G. E., & Mun, S. D. (2014). Effect of the Magnetic Pole Arrangement on the Surface Roughness of STS 304 by Magnetic Abrasive Machining. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 15(7), 1275–1281. https://doi.org/10.1007/s12541-014-0467-x

Tu, J., Paleocrassas, A. G., Reeves, N., & Rajule, N. (2014). Experimental characterization of a micro-hole drilling process with short micro-second pulses by a CW single-mode fiber laser. Optics and Lasers in Engineering, 55, 275–283. https://doi.org/10.1016/J.OPTLASENG.2013.11.002

Tu, J. F., & Riley, P. E. B. (2013). Low-temperature evaporative glass scoring using a single-mode ytterbium fiber laser. OPTICS AND LASERS IN ENGINEERING, 51(6), 696–706. https://doi.org/10.1016/j.optlaseng.2013.01.005

Tu, J. F., & Paleocrassas, A. G. (2011). Fatigue crack fusion in thin-sheet aluminum alloys AA7075-T6 using low-speed fiber laser welding. Journal of Materials Processing Technology, 211(1), 95–102. https://doi.org/10.1016/j.jmatprotec.2010.09.001

Paleocrassas, A. G., & Tu, J. F. (2010). Inherent instability investigation for low speed laser welding of aluminum using a single-mode fiber laser. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 210(10), 1411–1418. https://doi.org/10.1016/j.jmatprotec.2010.04.002

Harp, W. R., Paleocrassas, A. G., & Tu, J. F. (2008). A Practical method for determining the beam profile near the focal spot. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 37(11-12), 1113–1119. https://doi.org/10.1007/s00170-007-1067-z

Dennis, R. S., & Tu, J. F. (2008). Development of a localized heat treatment system for shape memory alloy wires using an ytterbium fiber laser. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 199(1-3), 245–255. https://doi.org/10.1016/j.jmatprotec.2007.07.050

Harp, W. R., Dilwith, J. R., & Tu, J. F. (2008). Laser ablation using a long-pulsed, high-fluence, CW single-mode fiber laser. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 198(1-3), 22–30. https://doi.org/10.1016/j.jmatprotec.2007.06.062

Paleocrassas, A. G., & Tu, J. F. (2007). Low-speed laser welding of aluminum alloy 7075-T6 using a 300-W,single-mode, ytterbium fiber laser. Welding Journal, 86(6), 179S–186.

Lin, C.-W., & Tu, J. F. (2007). Model-Based Design of Motorized Spindle Systems to Improve Dynamic Performance at High Speeds. Journal of Manufacturing Processes, 9(2), 94–108. https://doi.org/10.1016/S1526-6125(07)70111-1

Sweet, A. L., & Tuz, J. F. (2007). Tolerance design for the fit between bore and shaft for precision assemblies with significant error- scaling problems. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 45(22), 5223–5241. https://doi.org/10.1080/00207540600871244

Nakkiew, W., Lin, C.-W., & Tu, J. F. (2006). A new method to quantify radial error of a motorized end-milling cutter/spindle system at very high speed rotations. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 46(7-8), 877–889. https://doi.org/10.1016/j.ijmachtools.2005.04.021

Sweet, A. L., & Tu, J. F. (2006). Evaluating tolerances and process capability when using truncated probability density functions. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 44(17), 3493–3508. https://doi.org/10.1080/00207540500521576

Tu, J. F., Corless, M., & Jeppsson, J. (2004). Robust control of high speed end milling with unknown process parameter and CNC delay. Journal of Aerospace Engineering, 17(1), 09-. https://doi.org/10.1061/(asce)0893-1321(2004)17:1(1)