Jeff Joines Segall, N., Joines, J. A., Baldwin, R. N. D., Bresch, D., Coggins, L. G., Janzen, S., … Wright, M. C. (2022). Effect of Remote Cardiac Monitoring System Design on Response Time to Critical Arrhythmias. SIMULATION IN HEALTHCARE-JOURNAL OF THE SOCIETY FOR SIMULATION IN HEALTHCARE, 17(2), 112–119. https://doi.org/10.1097/SIH.0000000000000610 Carlton, N. P., Ormond, R. B., Joines, J. A., Morton-Aslanis, J., & Barker, R. L. (2020). Development of a Standard Testing Procedure for Evaluating Firefighter Protective Hoods on PyroHead Fire Test System. In Performance of Protective Clothing and Equipment: Innovative Solutions to Evolving Challenges (pp. 18–30). https://doi.org/10.1520/STP162420190090 Arangdad, S. R., Thoney-Barletta, K., Joines, J., & Rothenberg, L. (2019). Influence of demographics and motivational factors on US consumer clothing and shoes disposal behavior. Research Journal of Textile and Apparel, 23(3), 170–188. https://doi.org/10.1108/rjta-08-2018-0051 Standish, T., Joines, J. A., Young, K. R., & Gallagher, V. J. (2018). Improving SET Response Rates: Synchronous Online Administration as a Tool to Improve Evaluation Quality. RESEARCH IN HIGHER EDUCATION, 59(6), 812–823. https://doi.org/10.1007/s11162-017-9488-5 Sas, I., Joines, J. A., Thoney, K. A., & King, R. E. (2018). Logistics of carpet recycling in the US: Designing the collection network. Journal of the Textile Institute, 6, 1–10. https://doi.org/10.1080/00405000.2018.1480101 Young, K., Joines, J., Standish, T., & Gallagher, V. (2018). Student evaluations of teaching: the impact of faculty procedures on response rates. Assessment & Evaluation in Higher Education, 44(1), 37–49. https://doi.org/10.1080/02602938.2018.1467878 Adikorley, R. D., Thoney-Barletta, K., Joines, J., & Rothenberg, L. (2017). Apparel sourcing in Sub-Saharan Africa Views from apparel sourcing executives and trade policy representatives. RESEARCH JOURNAL OF TEXTILE AND APPAREL, 21(3), 203–218. https://doi.org/10.1108/rjta-05-2017-0022 Alexopoulos, C., Joines, J. A., & Kuhl, M. E. (2017). History of the winter simulation conference: Modern period (2008–2017). 2017 Winter Simulation Conference (WSC), 100–114. https://doi.org/10.1109/wsc.2017.8247785 Barton, R. R., Joines, J. A., & Morrice, D. J. (2017). History of the winter simulation conference: Period of growth, consolidation, and innovation (1993–2007). 2017 Winter Simulation Conference (WSC), 87–99. https://doi.org/10.1109/wsc.2017.8247784 Uluskan, M., Godfrey, A. B., & Joines, J. A. (2017). Impact of competitive strategy and cost-focus on global supplier switching (reshore and relocation) decisions. JOURNAL OF THE TEXTILE INSTITUTE, 108(8), 1308–1318. https://doi.org/10.1080/00405000.2016.1245596 Chapman, D. D., & Joines, J. A. (2017). Strategies for Increasing Response Rates for Online End-of-Course Evaluations. International Journal of Teaching and Learning in Higher Education, 29(1), 47–60. Rothenberg, L., Adikorley, R. A., Thoney, K., & Joines, J. A. (2017). Using Stepwise Regression and Nonparametric Tests to Analyze the Landed Cost Competitiveness of Producing Apparel in Different Companies. Proceedings of the 2017 Joint Statistical Meeting (JSM). Vieira, G. E., Joines, J. A., Thoney, K., & others. (2016). A new methodology for the design of robust supply chains based on orthogonal arrays DOE and computer simulation. Uluskan, M., Joines, J. A., & Godfrey, A. B. (2016). Comprehensive insight into supplier quality and the impact of quality strategies of suppliers on outsourcing decisions. SUPPLY CHAIN MANAGEMENT-AN INTERNATIONAL JOURNAL, 21(1), 92–102. https://doi.org/10.1108/scm-04-2015-0140 Uluskan, M., Godfrey, A. B., & Joines, J. A. (2016). Integration of Six Sigma to traditional quality management theory: an empirical study on organisational performance. Total Quality Management & Business Excellence, 28(13-14), 1526–1543. https://doi.org/10.1080/14783363.2016.1150173 Chapman, D., & Joines, J. A. (2016). Why Should I Fill this Out? Strategies for Increasing Response Rates for Online End-of-course Evaluations. International Journal of Teaching and Learning in Higher Education, 29. Sawatwarakul, W., Joines, J., & Shamey, R. (2015). A diagnostic expert system for the dyeing of protein fibres. COLORATION TECHNOLOGY, 131(5), 389–395. https://doi.org/10.1111/cote.12166 Sas, I., Thoney, K. A., Joines, J. A., King, R. E., & Woolard, R. (2015). Reverse Logistics of US Carpet Recycling (T. C. E. C. T.-M. Choi, Ed.). SUSTAINABLE FASHION SUPPLY CHAIN MANAGEMENT: FROM SOURCING TO RETAILING, Vol. 1, pp. 3–30. https://doi.org/10.1007/978-3-319-12703-3_1 Joines, J. A., & Roberts, S. D. (2015). Simulation Modeling with SIMIO: A Workbook (4th, Economy Version). Simio LLC. Joines, J., & Roberts, S. (2015). Simulation Modeling with SIMIO: A Workbook V4. Raleigh, NC: SIMIO LLC. Joines, J. A., & Roberts, S. D. (2015). Simulation modeling with SIMIO: A Workbook V4 (4th ed.). Sewickley, PA: SIMIO LLC. Bucci, M. J., Woolard, R., Joines, J., Thoney, K., & King, R. E. (2014). Incorporating economies of scale into facility location problems in carpet recycling. Journal of the Textile Institute, 105(12), 1300–1311. https://doi.org/10.1080/00405000.2014.890833 Joines, J. A., & Roberts, S. D. (2013). Simulation Modeling with SIMIO: A Workbook (3rd ed.). Simio LLC Sewickley, PA. Sas, I., Gorga, R. E., Joines, J. A., & Thoney, K. A. (2012). [Review of Literature review on superhydrophobic self-cleaning surfaces produced by electrospinning]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 50(12), 824–845. https://doi.org/10.1002/polb.23070 Joines, J. A., & Roberts, S. D. (2012). Simulation Modeling with SIMIO: A Workbook (2nd ed.). Simio LLC: Sewickley, PA: SIMIO LLC. Hartman, L., Joines, J. A., King, R. E., & Thoney, K. A. (2012). The effect speed and replenishment flexibility has on overall costs of sourcing apparel products. Journal of the Textile Institute, 103(6), 604–621. https://doi.org/10.1080/00405000.2011.595106 Hodge, G. L., Ross, K. G., Joines, J. A., & Thoney, K. A. (2011). Adapting lean manufacturing principles to the textile industry. Production Planning & Control Special Issue on Challenges in Apparel Production, Planning and Control, 22(3), 237–247. https://doi.org/10.1080/09537287.2010.498577 Pasquinelli, M., & Joines, J. A. (2011). Integrating Computing into Thermodynamics: Lessons Learned. 2011 ASEE Annual Conference & Exposition, 22–901. Vancouver, Canada. Fiallos, M. (2010). Developing a Cost Model for Sourcing Products for Different Distribution Channels. Shamey, R., Shim, W. S., & Joines, J. A. (2010). Development and application of expert systems in the textile industry. Modelling and Predicting Textile Behaviour, pp. 494–519. https://doi.org/10.1533/9781845697211.2.494 Joines, J. A., & Roberts, S. D. (2010). Simulation Modeling with SIMIO: A Workbook. Simio LLC. Joines, J. A., Roberts, S. D., & Zhou, Z. (2010). Simulation Modeling with SIMIO: A Workbook (Chinese Version). Simio LLC. Joines, J. A., Roberts, S. D., & Rubio, M. (2010). Simulation Modeling with SIMIO: A Workbook (Italian Version). Simio LLC. Joines, J. A., & Roberts, S. D. (2010). Simulation Modeling with SIMIO: A Workbook (Portuguese Version). Simio LLC. Joines, J. A., Roberts, S. D., & Otamendi, J. (2010). Simulation Modeling with SIMIO: A Workbook (Spanish Version). Simio LLC. Raubenheimer, D., Joines, J., & Craig, A. (2009). AC 2009-209: USING COMPUTATIONAL TOOLS TO ENHANCE PROBLEM SOLVING. ASEE, 14, 1. Wiebe, E., & others. (2009). AC 2009-676: COMPUTING ACROSS CURRICULA: THE VIEW OF INDUSTRY LEADERS. ASEE, 14, 1. Propst, M. D. (2009). Applying Linear Regression and Neural Network Meta-Models for Evolutionary Algorithm Based Simulation Optimization. Bullard, L., Joines, J. A., Rouskas, G., & Wiebe, E. (2009). Computing Across Curricula: The View of Industry Leaders. Proceedings of the 2009 American Society for Engineering Education International Conference. Retrieved from http://soa.asee.org/paper/conference/paper-view.cfm?id=10630 Wiebe, E., Ho, C.-L., Raubenheimer, D., Bullard, L., Joines, J., Miller, C., & Rouskas, G. (2009). Computing across curricula: The view of industry leaders. American Society for Engineering Education. Presented at the American Society for Engineering Education. Wood, J. W. (2009). Design for Six Sigma: Design and Development of an Equine Composite Flooring System. Brent, R., Craig, A., Joines, J., & Raubenheimer, D. (2009). Integration of Computer Based Problem Solving Into Engineering Curricula. Computers in Engineering Education Journal, 19(Jan-March). Joines, J. A. (2009, January 9). Simulation and Lean Six Sigma: Part 3 Defining Lean and Simulation, Success in Simulation. Retrieved from simio.biz website: http://simio.biz/blog/2009/02/05/six-sigma-and-simulation-part-3/ Craig, A., Joines, J. A., & Raubenheimer, D. (2009). Using Computational Tools to Enhance Problem Solving. American Society for Engineering Education. Presented at the American Society for Engineering Education International Conference. Retrieved from http://soa.asee.org/paper/conference/paper-view.cfm?id=10163 Cusher, A. A., & others. (2008). A design and analysis approach for drag reduction on aircraft with adaptive lifting surfaces. Raubenheimer, D. (2008). AC 2008-1062: INTEGRATION OF COMPUTER BASED PROBLEM SOLVING INTO ENGINEERING CURRICULA. age, 13, 1. Craig, A. (2008). AC 2008-740: COMPUTING ACROSS CURRICULA. age, 13, 1. Daley, C. M. (2008). Application of data mining tools for exploring data: Yarn quality case study. Joines, J. A., Roberts, S., & Raubenheimer, D. (2008). Computer-based modeling for engineers using Excel and VBA. 2008 ASEE annual conference & exposition: June 22-25, 2008. Washington, DC: American Society for Engineering Education. Craig, A., Joines, J. A., Miller, C., & Rouskas, G. (2008). Computing Across Curricula. Proceedings of the 2008 American Society for Engineering Education International Conference. Retrieved from http://papers.asee.org/conferences/paper-view.cfm?id=7421 Rouskas, G. N., Boullard, L., Craig, A. E., Joines, J., Miller, C., Miller, T. K., … Wiebe, E. (2008). Computing Across Curricula. ASEE Annual Conference & Exposition. Presented at the Citeseer. Brent, R., Craig, A., Joines, J. A., & Raubenheimer, D. (2008). Integration of Computer Based Problem Solving Into Engineering Curricula. Proceedings of the ASEE International Conference. Retrieved from http://papers.asee.org/conferences/paper-view.cfm?id=7743 Lada, E. K., Wilson, J. R., Steiger, N. M., & A., J. J. (2008). Performance evaluation of a wavelet-based spectral method for steady-state simulation analysis. Proceedings of the 2004 Winter Simulation Conference: Washington Hilton and Towers, Washington, D.C., U.S.A., December 5-8, 20043, 694–702. New York, N.Y.: Association for Computing Machinery. Wagoner, A. G., & others. (2008). Plant floor scheduling systems in A lean environment. Joines, J. A. (2008, November 30). Simulation and Lean Six Sigma: Part 1 Defining Six Sigma, Success in Simulation. Retrieved from simio.biz website: http://www.simio.biz/blog/2008/11/30/ Joines, J. A. (2008, December 5). Simulation and Lean Six Sigma: Part 2 Defining the Role of Simulation, Success in Simulation. Retrieved from simio.biz website: http://simio.biz/blog/2008/12/ Joines, J. A., Gupta, D., Gocke, A., King, R. E., & Kay, M. G. (2008). Supply chain multi-objective simulation optimization. Proceedings of the 2002 Winter Simulation Conference: Manchester Grand Hyatt San Diego, San Diego, CA, U.S.A., December 8-11, 2002, 1306–1314. https://doi.org/10.1109/wsc.2002.1166395 Bucci, M. G., Kay, M. G., Warsing, D. P., & Joines, J. A. (2007). A Comparison Meta-Heuristics for Large Scale Facility Location Problems with Economies of Scale. Proceedings of the Industrial Engineering Research Conference. Nashville, Tennessee. Roberts, S. (2007). AC 2007-3009: COMPUTER-BASED MODELING FOR ENGINEERS USING EXCEL AND VBA. 2007 ASEE, 12, 1. Joines, J. A., Roberts, S., & Raubenheimer, D. (2007). Computer-Based Modeling for Engineers using Excel and VBA. Proceedings of the ASEE International Conference. Retrieved from http://www.asee.org/acPapers/code/getPaper.cfm?paperID=13338 Lada, E. K., Wilson, J. R., Steiger, N. M., & Joines, J. A. (2007). Performance of a wavelet-based spectral procedure for steady-state simulation analysis. INFORMS Journal on Computing, 19(2), 150–160. https://doi.org/10.1287/ijoc.1050.0161 Hartman, L. M. (2007). Strategic analysis of speed and flexibility in sourcing textile products. Joines, J. A., Culbreth, C. T., & Schultz, S. (2007). The Lumber Procurement and Kiln Scheduling Problem: A Hybrid-GA Approach. Wood and Fiber Science, 39(4), 628–638. Seastrunk, C. S. (2006). Algorithm to Systematically Reduce Human Errors in Healthcare. Joines, J. A., Thoney, K., & Kay, M. G. (2006). Supply Chain Multi-Objective Simulation Optimization. Proceedings of the 4th International Industrial Simulation Conference, 125-132, 125–132. Palermo, Italy: Ostend: EUROSIS-ETI. Steiger, N. M., Lada, E. K., Wilson, J. R., Joines, J. A., Alexopoulos, C., & Goldsman, D. (2005). ASAP3: a batch means procedure for steady-state simulation analysis. ACM Transactions on Modeling and Computer Simulation, 15(1), 39–73. https://doi.org/10.1145/1044322.1044325 Jasper, W. J., & Joines, J. (2005). Design of minimum entropy wavelet filters using genetic algorithms. Wavelet Applications in Industrial Processing III, 6001, 60010G. Jasper, W., Joines, J. A., & Brezenvich, J. (2005). Fabric defect detection using a GA trained wavelet filter. Journal of the Textile Institute, 96(1), 43–54. https://doi.org/10.1533/joti.2004.0057 Zechman, E. M. (2005). Improving predictability of simulation models using evolutionary computation-based methods for model error correction. Steiger, N. M., Kuhl, M. E., Joines, J. A., & Armstrong, B. (Eds.). (2005). Proceedings of the 2005 Winter Simulation Conference. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers. Steiger, N. M., Kuhl, M. E., Joines, J. A., & Armstrong, B. (2005). Proceedings of the 2005 Winter Simulation Conference: Hilton at the Walt Disney World Resort, Orlando, Florida, U.S.A., Dec 4-7, 2005. New York, N.Y.: Association for Computing Machinery. Powell, W. B. (2005). The optimizing-simulator: Merging simulation and optimization using approximate dynamic programming. Simulation Conference, 2005 Proceedings of the Winter, 14-pp. Joines, J. A., Martin, B., & Thoney, K. (2005). Utilizing Simple Spreadsheet Simulators to Develop a Finished Goods Inventory Model for an Apparel Company. Proceedings of the 3rd International Industrial Simulation Conference, 417–422. Berlin, Germany: Ghent: EUROSIS. Joines, J. A., Thoney, K., King, R. E., & Hodgson, T. (2004). A Simulation-Based Scheduling System and Its Implementation in a Textile Operation. In J. Marin & V. Koncar (Eds.), Proceedings of the 2nd International Industrial Simulation Conference. Malaga, Spain: Ghent, Belgium: EUROSIS-ETI. Martin, B., Clapp, T., & Joines, J. A. (2004). Applying Systems Approach and Ideality to the Supply Chain Bullwhip Effect. The TRIZ Journal. Martin, B., Clapp, T. G., & Joines, J. A. (2004). Integrating Ideality with the System Operator Part 1: A Tutorial--Applied to the Bullwhip Effect. TRIZ Journal. Cho, E. G. (2004). Scheduling supply chains with batchwise fabric dyeing operations. Martin, B. E., Clapp, T. G., & Joines, J. A. (2004). Solving a Real World Inventory Management Problem Using a Technique for Integrating Ideality with the System Operator. Proceedings of the 2004 Triz Conference. Italy. Lada, E. K., J.R.Wilson, N. M. S., & Joines, J. A. (2004). Steady-state simulation analysis using Asap3. Proceedings of the 2004 Winter Simulation Conference: Washington Hilton and Towers, Washington, D.C., U.S.A., December 5-8, 20043, 672–680. New York, N.Y.: Association for Computing Machinery. A Genetic Algorithm for Function Optimization: A Matlab Implementation. (2003). Research Journal of Microbiology, 1(6), 979–985. Barnhardt, R., Hinestroza, J., & Joines, J. A. (2003). Control Systems at ITMA 2003. Journal of Textile and Apparel, Technology and Management, 3(3). W., J., Joines, J. A., & Brenzovich, J. (2003). Fabric Defect Detection Using a GA Tuned Wavelet Filter. Proceedings of the ISCA Conference on Computers and Applications, 345–349. Jasper, W., Joines, J. A., & Brenzovich, J. (2003). Fabric Defect Detection Using a GA Tuned Wavelet Filter. Computers and Their Applications, 345–350. Jasper W., J., J. A., & Brenzovich, J. (2003). Fabric defect detection using a GA tuned wavelet filter. Computers and their applications : proceedings of the ISCA 18th international conference, Honolulu, Hawaii, USA March 26-28, 2003, 345–349. Cary, NC: International Society for Computers and Their Applications. Brenzovich, J. A. (2003). Fabric defect detection using a GA tuned wavelet filter. Joines, J. A., Sutton, A. B., Thoney, K., King, R. E., & Hodgson, T. J. (2003). Factory scheduling: implementing a simulation-based scheduling system for a two-plant operation. Proceedings of the 35th conference on Winter simulation: driving innovation, 1440–1448. Lertworasirikul, S., Fang, S.-C., Joines, J. A., & Nuttle, H. L. (2003). Fuzzy BCC model for data envelopment analysis. Fuzzy Optimization and Decision Making, 2(4), 337–358. https://doi.org/10.1023/b:fodm.0000003953.39947.b4 Lertworasirikul, S., Fang, S.-C., Joines, J. A., & Nuttle, H. L. W. (2003). Fuzzy Data Envelopment Analysis: A Credibility Approach. In J. L. Verdegay (Ed.), Fuzzy Sets Based Heuristics for Optimization (pp. 141–158). https://doi.org/10.1007/978-3-540-36461-0_10 Lertworasirikul, S., Fang, S. C., Joines, J. A., & Nuttle, H. L. W. (2003). Fuzzy data envelopment analysis (DEA): a possibility approach. Fuzzy Sets and Systems, 139(2), 379–394. https://doi.org/10.1016/S0165-0114(02)00484-0 Joines, J. A., Sutton, A. W., Thoney, K. A., King, R. E., & Hodgson, T. J. (2003). Implementing a simulation-based scheduling system for a two-plant operation. Proceedings of the 2003 Winter Simulation Conference: Fairmont Hotel, New Orleans, LA, U.S.A., December 7-10, 2003. https://doi.org/10.1109/wsc.2003.1261587 Joines, J., & Kay, M. G. (2002). 2002 hybrid genetic algorithms and random linkage. CEC'02 : proceedings of the 2002 Congress on Evolutionary Computation : May 12-17, 2002, Hilton Hawaiian Village Hotel, Honolulu, Hawaii, 2, 1733–1738. https://doi.org/10.1109/cec.2002.1004504 Lertworasirikul, S., Fang, S.-C., Joines, J. A., & Nuttle, H. L. (2002). A Possibility Approach to Fuzzy Data Envelopment Analysis. 8th International Conference on Fuzzy Theory and Technology. Durham, N.C. Melton, R., Culbreth, C. T., J.A., J., & Roberts, S. D. (2002). Design and Analysis of Furniture Finishing Systems. Forest Products Journal, 52(7-8), 27–33. Melton, R., Culbreth, C. T., Joines, J. A., & Roberts, S. D. (2002). Design and analysis of furniture finishing systems. Forest Products Journal, 52(7-8), 27–33. Melton, R. H., Culbreth, C. T., Roberts, S. D., & Joines, J. A. (2002). Design and evaluation of furniture finishing systems. Forest Products Journal, 52(7/8), 27. Lertworasirikul, S., Fang, S. C., Nuttle, H. L. W., & Joines, J. A. (2002). Fuzzy data envelopment analysis. Proceedings of the 9th Bellman Continuum, Beijing, 342. Thoney, K. A., Hodgson, T. J., Joines, J. A., & Maninagarajan, P. (2002). Rolling horizon scheduling of large job shops. Proceedings of the 2002 Winter Simulation Conference: Manchester Grand Hyatt San Diego, San Diego, CA, U.S.A., December 8-11, 2002. https://doi.org/10.1109/wsc.2002.1166485 Yaghubian, A. R., Hodgson, T. J., & Joines, J. A. (2001). Dry-or-buy decision support for dry kiln scheduling in furniture production. IIE Transactions, 33(2), 131–136. https://doi.org/10.1023/A:1007603002606 YAGHUBIAN, A. R. M. A. N. R., HODGSON, T. H. O. M. J., & JOINES, J. E. F. F. R. E. Y. A. (2001). Dry-or-buy decision support for dry kiln scheduling in furniture production. IIE Transactions, 33(2), 131–136. https://doi.org/10.1080/07408170108936814 Joines, J. A. (2000). 2000 Winter Simulation Conference Proceedings: Orlando, Fl., USA, 10-13 December 2000. IEEE. Joines, J. A., Barton, R. R., Kang, K., & Fishwick, P. A. (2000). 2000 Winter Simulation Conference proceedings: Wyndham Palace Resort & Spa, Orlando, FL, U.S.A., 10-13 December, 2000. New York, NY: Association for Computing Machinery. Joines, J. A., Kay, M. G., King, R. E., & Thomas Culbreth, C. (2000). A hybrid genetic algorithm for manufacturing cell design. Journal of the Chinese Institute of Industrial Engineers, 17(5), 549–564. https://doi.org/10.1080/10170669.2000.10432875 Joines, J. A., Houck, C. R., & Kay, M. G. (2000). Characterizing search spaces for Tabu search and including adaptive memory into a genetic algorithm. Journal of the Chinese Institute of Industrial Engineers, 17(5), 527–536. https://doi.org/10.1080/10170669.2000.10432873 Melton, R. H. (2000). Methodology for furniture finishing system capacity planning. Joines, J. A., King, R. E., & Culbreth, C. T. (2000). Moving beyond the parts incidence matrix: Alternative routings and operations for the cell formation problem. Engineering Valuation and Cost Analysis, 2(Special Issue on Control and Design of Manufacturing Cells), 327–348. Joines, J. A., Barton, R. R., Kang, K., Fishwick, P. A., & Schulze, T. (2000). Proceedings of the 2000 Winter Simulation Conference. Joines, J. A., Barton, R. R., Kang, K., & Fishwick, P. A. (Eds.). (2000). Winter Simulation Conference Proceedings. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers. Joines, J. A., Culbreth, C. T., & King, R. E. (1999). A demand-based hybrid-GA approach for manufacturing cell design. In N. Tawara, H. Hwang, W. Xu, & M. Gen (Eds.), Proceedings of the Second Asia-Pacific Conference on Industrial Engineering and Management Systems (pp. 193–196). Kanazawa, Japan. Joines, J. A., & Culbreth, C. T. (1999). A hybrid-GA approach for dry-kiln scheduling and inventory control. In N. Tawara, H. Hwang, W. Xu, & M. Gen (Eds.), Proceedings of the Second Asia-Pacific Conference on Industrial Engineering and Management Systems (pp. 193–196). Kanazawa, Japan. Yaghubian, A. R., Hodgson, T. J., Joines, J. A., Culbreth, C. T., & Huang, J. C. (1999). Dry kiln scheduling in furniture production. IIE Transactions, 31(8), 733–738. https://doi.org/10.1080/07408179908969872 Joines, J. A., King, R. E., & Culbreth, C. T. (1998). Cell Formation Using Genetic Algorithms. Group Technology and Cellular Manufacturing, pp. 185–204. https://doi.org/10.1007/978-1-4615-5467-7_11 Huang, J.-C., Culbreth, C. T., Joines, J. A., King, R. E., & Hodgson, T. G. (1998). Decision support system for lumber procurement and dry kiln scheduling. Forest Products Journal, 48(9), 51–59. Houck, C. R. (1998). The genetic algorithm optimization toolbox (GAOT) for Matlab 5. Http://Www. Ie. Ncsu. Edu/Mirage/GAToolBox/Gaot. Joines, J. A., & Roberts, S. D. (1997). An introduction to object-oriented simulation in C++. Proceedings of the 29th conference on Winter simulation - WSC '97. https://doi.org/10.1145/268437.268453 Houck, C. R., Joines, J. A., Kay, M. G., & Wilson, J. R. (1997). Empirical Investigation of the Benefits of Partial Lamarckianism. EVOLUTIONARY COMPUTATION, 5(1), 31–60. https://doi.org/10.1162/evco.1997.5.1.31 Houck, C. R., Joines, J. A., & Kay, M. G. (1996). Comparison of genetic algorithms, random restart, and two-opt switching for solving large location-allocation problems. Computers & Operations Research, 23(6), 587–596. https://doi.org/10.1016/0305-0548(95)00063-1 Joines, J. A., King, R. E., & Culbreth, C. T. (1996). Comprehensive review of production-oriented cell formation techniques. International Journal of Flexible Automation and Integrated Manufacturing, 3(3&4), 161–200. Joines, J. A., & Roberts, S. D. (1996). Design of object-oriented simulations in C++. Proceedings of the 28th conference on Winter simulation - WSC '96, 157–165. https://doi.org/10.1145/256562.256574 Joines, J., Culbreth, C. T., & King, R. E. (1996). Manufacturing cell design: An integer programming model employing genetic algorithms. IIE Transactions, 28(1), 69–85. https://doi.org/10.1080/07408179608966253 Joines, J. A., King, R. E., & Culbreth, C. T. (1996). Moving beyond the parts incidence matrix: Alternative routings and operations for the cell formation problem. International Journal of Engineering Design and Automation. Stanfield, P. M., King, R. E., & Joines, J. A. (1996). Scheduling arrivals to a production system in a fuzzy environment. European Journal of Operational Research, 93(1), 75–87. https://doi.org/10.1016/0377-2217(95)00117-4 Houck, C. R., Joines, J. A., & Kay, M. G. (1996). Utilizing Lamarckian evolution and the Baldwin effect in hybrid genetic algorithms. Department of Industrial Engineering, North Carolina State Univ. Houck, C. R., Joines, J. A., & Kay, M. G. (1995). A genetic algorithm for function optimization: a Matlab implementation. In Ncsu-ie tr (No. NCSU-IE TR 95; Vol. 95, pp. 1–10). Joines, J. A. (1995). Finding It On The Internet John Wiley and Sons, Inc., New York, 1994, 302 pp. ISBN 0-471-03857-1. (Paperback). List: $19.95. The Engineering Economist, 40(3), 304–306. https://doi.org/10.1080/00137919508903156 Joines, J. A., King, R. E., & Culbreth, C. T. (1995). Manufacturing cell design using an integer-based genetic algorithm. In R. S. ed., W. Sullivan, M. Ahmad, & H. Jacobi (Eds.), Proceedings of 1995 International Conference on Flexible Automation and Integrated Manufacturing (pp. 824–835). New York: Begell House, Inc. Houck, C. R., Joines, J. A., & Kay, M. G. (1995). The Genetic Algorithm Optimization Toolbox (GAOT). North Carolina State University, Department of Industrial Engineering, NCSU-IE Technical Report, 95–09. Houck, C., Joines, J., & Kay, M. (1995). The effective use of local improvement procedures in conjunction with genetic algorithms. Technical Report NCSU-IE Technical Report 95, North Carolina State University. Joines, J. A., & Roberts, S. D. (1994). Design of object-oriented simulations using C++. In J. D. Tew, S. Manivannan, D. A. Sadowski, & F. Seila (Eds.), Proceedings of the 1994 Winter Simulation Conference (pp. 156–165). Piscataway, New Jersey: Institute of Electrical and Electronics Engineers. Joines, J. A. (1993). Manufacturing cell design using genetic algorithms. North Carolina State University. Joines, J. A., Powell, K. A., & Roberts, S. D. (1992). Object-oriented modeling and simulation with C++. Proceedings of the 24th conference on Winter simulation - WSC '92. https://doi.org/10.1145/167293.167321 JOINES, J. E. F. F., & MIKE, M. A. Y. A genetic algorithm for function optimization. A matlab implementation by Chris Houck. Houck, C., Joines, J., & Kay, M. A genetic algorithm for function optimization: A Matlab implementation, 1995. NCSU-IE TR, 95–05. Houck, C., Joines, J., & Kay, M. A genetic algorithm for function optimization: a Matlab implementation, NCSU-IE TR 95-09, 1995. Copyright of Key Engineering Materials Is the Property of Trans Tech Publications, Ltd and Its Content May Not Be Copied or Emailed to Multiple Sites or Posted to a Listserv without the Copyright Holder's Express Written Permission. However, Users May Print, Download, or Email Articles for Individual Use. Houck, C., & Joines, J. A genetic algorithm for function optimization: a matlab implementation. Report NCSU IE TR 95-09. Joines, J. A., Powell, K. A., & Roberts, S. D. Building Object-Oriented Simulations with C++. Proceedings of 1993 Winter Simulation Conference - (WSC '93). https://doi.org/10.1109/wsc.1993.718032 Joines, J. A., & Roberts, S. D. Design of object-oriented simulations in C++. Winter Simulation Conference Proceedings, 1995. https://doi.org/10.1109/wsc.1995.478709 Joines, J. A., & Roberts, S. D. Fundamentals of object-oriented simulation. 1998 Winter Simulation Conference. Proceedings (Cat. No.98CH36274). https://doi.org/10.1109/wsc.1998.744909 Joines, J. A., & White, M. W. Improved generalization using robust cost functions. [Proceedings 1992] IJCNN International Joint Conference on Neural Networks. https://doi.org/10.1109/ijcnn.1992.227083 Joines, J. A., & Culbreth, C. T. Job sequencing and inventory control for a parallel machine problem: a hybrid-GA approach. Proceedings of the 1999 Congress on Evolutionary Computation-CEC99 (Cat. No. 99TH8406). https://doi.org/10.1109/cec.1999.782550 Joines, J. A., & Roberts, S. D. Object-Oriented Simulation. Handbook of Simulation, pp. 395–427. https://doi.org/10.1002/9780470172445.ch11 Joines, J. A., & Houck, C. R. On the use of non-stationary penalty functions to solve nonlinear constrained optimization problems with GA's. Proceedings of the First IEEE Conference on Evolutionary Computation. IEEE World Congress on Computational Intelligence. https://doi.org/10.1109/icec.1994.349995 Lada, E. K., Wilson, J. R., Steiger, N. M., & Joines, J. A. Performance Evaluation of a Wavelet-Based Spectral Method for Steady-State Simulation Analysis. Proceedings of the 2004 Winter Simulation Conference, 2004. https://doi.org/10.1109/wsc.2004.1371378 King, R. E. Quantifying the Value of Information in a Supply Chain Russell E. King, Thom J. Hodgson (NCSU Engineering); Jeff Joines, Kristin A. Thoney (NCSU Textiles) TEAM LEADER: Russell E. King WEB SITE: http://cfd45. cfdynamics. com/ntcresearch/projectapp/? project= S04-NS02 PROJECT GOAL. Joines, J. A., & Roberts, S. D. Simulation in an object-oriented world. WSC'99. 1999 Winter Simulation Conference Proceedings. 'Simulation - A Bridge to the Future' (Cat. No.99CH37038). https://doi.org/10.1109/wsc.1999.823062 Steiger, N. M., Lada, E. K., Wilson, J. R., Joines, J. A., Alexopoulos, C., & Goldsman, D. Steady-State Simulation Analysis Using Asap3. Proceedings of the 2004 Winter Simulation Conference, 2004. https://doi.org/10.1109/wsc.2004.1371375 Hartman, L., Joines, J. A., Thoney, K. A., & King, R. E. Strategic Analysis of Speed and Flexibility in Sourcing Textile Products. Proceedings of the 2008 Industrial Simulation Conference, 125–133. Lyon, France. Melton, R. H., Culbreth, C. T., Roberts, S. D., & Joines, J. A. Using Automation for finishing room capacity planning. Proceeding of the 2001 Winter Simulation Conference (Cat. No.01CH37304). https://doi.org/10.1109/wsc.2001.977400 Joines, J. A., & Kay, M. G. Utilizing Hybrid Genetic Algorithms. Evolutionary Optimization, pp. 199–228. https://doi.org/10.1007/0-306-48041-7_8