Works (88)
Updated: September 8th, 2023 05:00
2023 article
Simulation techniques for smart textile predictive design
8TH INTERNATIONAL CONFERENCE ON INTELLIGENT TEXTILES & MASS CUSTOMISATION, Vol. 1266.
TL;DR:
This work presents two case studies that demonstrate how 3D garment simulation can be used as a tool for predictive design of smart textile products, and how strain-dependent properties such as resistance and contact pressure can be predicted and how designs can be optimized to achieve certain performance metrics.
(via Semantic Scholar)
open access via doi.org (publisher)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: July 24, 2023
2023 journal article
Simulation-Based Contact Pressure Prediction Model to Optimize Health Monitoring Using E-Textile Integrated Garment
IEEE SENSORS JOURNAL, 23(16), 18316–18324.
author keywords: Biosignals; cloth simulation; compression garments; contact pressure (CP) prediction; electrocardiog-raphy; electronic textile (E-textile); knit fabrics; material selection; wearing comfort
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: September 5, 2023
2022 journal article
Adhesive free, conformable and washable carbon nanotube fabric electrodes for biosensing
NPJ FLEXIBLE ELECTRONICS, 6(1).
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: January 3, 2023
2022 journal article
Design of Quasi-Endfire Spoof Surface Plasmon Polariton Leaky-Wave Textile Wearable Antennas
IEEE ACCESS, 10, 115338–115350.
author keywords: Surface impedance; Surface waves; Leaky wave antennas; Modulation; Corrugated surfaces; Optical surface waves; Perturbation methods; Wearable computers; Leaky-wave antenna; spoof surface plasmon; surface wave; wearable antennas
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: November 28, 2022
2022 journal article
Design of a scalable, flexible, and durable thermoelectric cooling device for soft electronics using Kirigami cut patterns
FLEXIBLE AND PRINTED ELECTRONICS, 7(1).
author keywords: e-textiles; flexible thermoelectrics; thermoelectric cooling devices; flexible electronics; wearable electronics
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: January 31, 2022
2022 article
Textile-Integrated Liquid Metal Electrodes for Electrophysiological Monitoring
Li, B. M., Reese, B. L., Ingram, K., Huddleston, M. E., Jenkins, M., Zaets, A., … Tabor, C. E. (2022, July 27). ADVANCED HEALTHCARE MATERIALS, Vol. 7.
author keywords: airbrush; e-textiles; flexible electronics; smart textiles; soft electrodes; spray coating
MeSH headings : Electric Conductivity; Electric Impedance; Electrodes; Metals; Textiles
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: June 23, 2022
2021 journal article
Airbrushed PVDF-TrFE Fibrous Sensors for E-Textiles
ACS APPLIED ELECTRONIC MATERIALS, 3(12), 5307–5326.
author keywords: solution blow spinning; nanofibers; PVDF-TrFE scaffold; nonwovens; piezoelectric
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science; OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: December 1, 2021
2021 journal article
Influence of Armband Form Factors on Wearable ECG Monitoring Performance
IEEE SENSORS JOURNAL, 21(9), 11046–11060.
author keywords: Electrodes; Electrocardiography; Textiles; Sensors; Biomedical monitoring; Monitoring; Force; Textiles; E-textiles; compression garment; textile design; biometric devices; body sensor networks; cyber-physical systems; electrocardiography; dry electrode; screen printing
TL;DR:
The role of electrode location and contact pressure on the ECG sensing performance of an electronic textile armband worn on the upper left arm is elucidated and the fundamental design parameters discussed serve as a benchmark for the design of future E-textile and wearable form factors with efficient sensing performance.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
9. Industry, Innovation and Infrastructure
(OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: May 10, 2021
2021 article
Inkjet Printed Textile Force Sensitive Resistors for Wearable and Healthcare Devices
Ju, B., Kim, I., Li, B. M., Knowles, C. G., Mills, A., Grace, L., & Jur, J. S. (2021, July 1). ADVANCED HEALTHCARE MATERIALS, Vol. 7.
author keywords: E-textiles; flexible electronics; force sensitive resistors; inkjet printing; piezoresistive sensors; wearable healthcare devices
MeSH headings : Delivery of Health Care; Electric Conductivity; Electrodes; Humans; Textiles; Wearable Electronic Devices
TL;DR:
This work presents a novel technique for developing textile FSRs (TFSRs) using a combination of inkjet printing of metal‐organic decomposition silver inks and heat pressing for facile integration into textiles.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries, ORCID
Added: July 12, 2021
2021 journal article
Interconnected cathode-electrolyte double-layer enabling continuous Li-ion conduction throughout solid-state Li-S battery
ENERGY STORAGE MATERIALS, 44, 136–144.
author keywords: Garnet; Composite solid electrolytes; All-solid-state batteries; Lithium-sulfur batteries; Continuous Li-ion conduction
UN Sustainable Development Goal Categories
11. Sustainable Cities and Communities
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: November 15, 2021
2021 journal article
Microstructures in All-Inkjet-Printed Textile Capacitors with Bilayer Interfaces of Polymer Dielectrics and Metal-Organic Decomposition Silver Electrodes
ACS APPLIED MATERIALS & INTERFACES, 13(20), 24081–24094.
author keywords: e-textiles; inkjet printing; polymer dielectrics; MOD silver ink; interface behavior; flexible electronics
TL;DR:
How textiles' unique microstructures and bilayer dielectric layer designs benefit reliability and scalability in the inkjet process as well as the use in wearable electronics with electromechanical performance is demonstrated.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: May 15, 2021
2021 article
Smart materials and devices for electronic textiles
Zheng, Z., Jur, J., & Cheng, W. (2021, June 8). MRS BULLETIN.
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: June 28, 2021
2020 journal article
Compact, Low-Profile and Robust Textile Antennas With Improved Bandwidth for Easy Garment Integration
IEEE ACCESS, 8, 77490–77500.
author keywords: Microstrip antennas; Textiles; Microstrip; Permittivity; Bandwidth; Fabrication; Antenna; textile antennas; embroidered; screen printing; wearable application
TL;DR:
Experimental results show that the proposed proximity-fed antenna outperforms wearable antennas that employ more conventional feeding methodologies and possesses an extreme robustness when subject to structural deformation and human body loading effects.
(via Semantic Scholar)
Source: Web Of Science
Added: May 26, 2020
2020 journal article
Direct-write printing process of conductive paste on fiber bulks for wearable textile heaters
SMART MATERIALS AND STRUCTURES, 29(8).
author keywords: direct-write printing; conductive paste; porous substrates; e-textiles; flexible electronics
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: August 10, 2020
2020 journal article
Evaluation of Infrared Absorption on Thermal Properties of Modified Modacrylic Fibers
AATCC JOURNAL OF RESEARCH, 7(2).
author keywords: Absorption; Infrared; Modacrylic; Nylon; Thermal Comfort
TL;DR:
A novel modacrylic fiber with the capability to absorb ∼80% of all infrared radiation was evaluated for use in personal thermal comfort applications and it was concluded that this altered modac acrylic fiber possesses both a unique thermal signature as well as increased heat flux compared to 100% cotton.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science; OpenAlex)
Source: Web Of Science
Added: March 30, 2020
2020 journal article
Iron-on carbon nanotube (CNT) thin films for biosensing E-Textile applications
CARBON, 168, 673–683.
author keywords: E-Textiles; Electrocardiogram (ECG); Composite materials; Carbon nanotubes; Biometric devices
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: September 21, 2020
2020 journal article
Microfluidic Behavior of Alumina Nanotube-Based Pathways within Hydrophobic CNT Barriers
LANGMUIR, 36(30), 8792–8799.
TL;DR:
This paper examines how the alignment of the alumina nanostructures with high internal porosity enables increasing capillary action and the sensitivity of detection within microfluidic channels within hydrophobic carbon nanotube (CNT) barriers.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation
(Web of Science)
Source: Web Of Science
Added: August 31, 2020
2020 journal article
Self-Powered Cardiac Monitoring: Maintaining Vigilance With Multi-Modal Harvesting and E-Textiles
IEEE SENSORS JOURNAL, 21(2), 2263–2276.
author keywords: Monitoring; Biomedical monitoring; Sensor systems; Energy harvesting; Wearable sensors; Wireless communication; Atrial fibrillation; Bluetooth; body sensor networks; cyber-physical systems; energy harvesting; E-textiles; low-power electronics; remote monitoring; self-powered; smart textiles; wearable; wireless
TL;DR:
This paper introduces a self-powered system for uninterrupted vigilant cardiac and activity monitoring that senses and streams electrocardiogram (ECG) and motion data continuously to a smartphone while consuming only $683~\mu \text{W}$ on average.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: January 19, 2021
2019 journal article
Bi-component carbohydrate and lignin nanoparticle production from bio-refinery lignin: A rapid and green method
BioResources, 14(3), 6179–6185.
author keywords: Carbohydrate-lignin; Lignin nanoparticle; Bio-refinery lignin; Green processing; Sodium hydroxide; Urea; Bi-component
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation
(OpenAlex)
Sources: Web Of Science, NC State University Libraries, Crossref
Added: July 22, 2019
2019 journal article
Cellulose Transparent and Flexible Films Prepared from DMAc/LiCl Solutions
BIORESOURCES, 14(4), 9021–9032.
author keywords: Cellulose film; DMAc/LiCl; Transparent film; Flexible film
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation
(OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: December 2, 2019
2019 journal article
Inkjet Printing of Reactive Silver Ink on Textiles
ACS APPLIED MATERIALS & INTERFACES, 11(6), 6208–6216.
author keywords: E-textiles; inkjet printing; particle freereactive ink; silver coating; conductive pattern; bending; washability
TL;DR:
A novel reliable and conformal inkjet printing process is demonstrated for printing particle-free reactive silver ink on uncoated polyester textile knit, woven, and nonwoven fabrics and it was found that the conductivity and the resolution of the inkjet-printed tracks are directly related with the packing and the tightness of fabric structures and fiber sizes.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: March 11, 2019
2018 journal article
Correlation of printing faults with the RF characteristics of coplanar waveguides (CPWs) printed on nonwoven textiles
SENSORS AND ACTUATORS A-PHYSICAL, 273, 240–248.
author keywords: Printed electronics; Coplanar waveguide; Textile; Screen printing; RF characterization
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2018 journal article
Inkjet Process for Conductive Patterning on Textiles: Maintaining Inherent Stretchability and Breathability in Knit Structures
ADVANCED FUNCTIONAL MATERIALS, 29(7).
author keywords: e-textiles; flexible electronics; inkjet printing; reactive silver ink; ultrathin coating
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: March 11, 2019
2018 journal article
Laser-etch patterning of metal oxide coated carbon nanotube 3D architectures
NANOTECHNOLOGY, 29(33).
author keywords: 3D patterning; laser etching; microfluidics; atomic layer deposition; vertically aligned carbon nanotubes; hybrid structures
TL;DR:
A new route is opened for fabricating very low density three dimensionally patterned materials with areas of dissimilar materials and properties through tuning of processing conditions, the alumina nanotube (etched) regions became hydrophilic while the bulk material remained hydrophobic and electrically conductive.
(via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018
2018 journal article
Modifying the morphology and properties of aligned CNT foams through secondary CNT growth
NANOTECHNOLOGY, 29(29).
author keywords: carbon nanotube; foam; synthesis; low density material
TL;DR:
Growth of secondary carbon nanotubes (CNTs) throughout a three-dimensional assembly of CNTs in the form of aligned CNT/carbon (ACNT/C) foams is reported for the first time.
(via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018
2018 journal article
Photoremediation of heavy metals from aqueous environments onto ZnO coated fibrous polyethylene terephthalate nonwovens
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 36(3).
Source: Web Of Science
Added: August 6, 2018
2018 journal article
Properties and Applications of Vapor Infiltration into Polymeric Substrates
JOM, 71(1), 238–245.
Source: Web Of Science
Added: January 14, 2019
2017 journal article
Effect of isolation method on reinforcing capability of recycled cotton nanomaterials in thermoplastic polymers
Journal of Materials Science, 52(9), 4997–5013.
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2017 conference paper
Fabrication and packaging of flexible and breathable patch antennas on textiles
Southeastcon 2017.
Source: NC State University Libraries
Added: August 6, 2018
2017 journal article
Human and environmental analysis of wearable thermal energy harvesting
ENERGY CONVERSION AND MANAGEMENT, 143, 218–226.
Contributors: A. Myers, R. Hodges n & n
author keywords: Wearable technology; Energy harvesting; Thermoelectric devices; Environmental to human correlations
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science; OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2017 journal article
Printed, metallic thermoelectric generators integrated with pipe insulation for powering wireless sensors
APPLIED ENERGY, 208, 758–765.
author keywords: Thermoelectric generator; Screen printing; Internet of things; Pipe insulation; Wireless sensing network
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science; OpenAlex)
Source: Web Of Science
Added: August 6, 2018
2017 journal article
Strong and resilient alumina nanotube and CNT/alumina hybrid foams with tuneable elastic properties
RSC ADVANCES, 7(45), 27923–27931.
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2017 journal article
Thread-Like CMOS Logic Circuits Enabled by Reel-Processed Single-Walled Carbon Nanotube Transistors via Selective Doping
ADVANCED MATERIALS, 29(31).
author keywords: complelentary metal-oxide-semiconductor (CMOS) integrated circuits; deep UV irradiation; single-walled carbon nanotubes (SWCNTs); thread-like fiber electronic devices; transistors
TL;DR:
High-performance reel-processed complementary metal-oxide-semiconductor (CMOS) integrated circuits are reported on 1D fiber substrates by using selectively chemical-doped single-walled carbon nanotube (SWCNT) transistors, enabling high-performance and reliable thread-like CMOS inverter circuits.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2016 journal article
Cellulose-Lignin Biodegradable and Flexible UV Protection Film
ACS Sustainable Chemistry & Engineering, 5(1), 625–631.
author keywords: UV protection; Cellulose; Lignin; Click chemistry; Transparent film; Flexible film
Sources: Web Of Science, NC State University Libraries, Crossref
Added: August 6, 2018
2016 journal article
Electrical Conductivity, Thermal Behavior, and Seebeck Coefficient of Conductive Films for Printed Thermoelectric Energy Harvesting Systems
JOURNAL OF ELECTRONIC MATERIALS, 45(11), 5561–5569.
author keywords: Printed thermoelectric generators; energy harvesting; electrical conductivity; thermal conductivity; Seebeck coefficient; conductive films
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science; OpenAlex)
Source: Web Of Science
Added: August 6, 2018
2016 journal article
Human and Environment Influences on Thermoelectric Energy Harvesting Toward Self-Powered Textile-Integrated Wearable Devices
MRS ADVANCES, 1(38), 2665–2670.
Contributors: A. Myers, R. Hodges n & n
TL;DR:
Key materials and design factors in on-body thermoelectric energy harvesting that allows for a strategic approach to improving the integration of the TEGs are demonstrated.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science; OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2016 journal article
Photoluminescence Mechanism and Photocatalytic Activity of Organic-Inorganic Hybrid Materials Formed by Sequential Vapor Infiltration
LANGMUIR, 32(17), 4289–4296.
TL;DR:
SVI processing improved the photocatalytic activity of the fibers, as demonstrated by photodeposition of Ag and Au metal particles out of an aqueous metal salt solution onto fiber surfaces via UVA light exposure.
(via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018
2016 journal article
Printed Stretchable Interconnects for Smart Garments: Design, Fabrication, and Characterization
IEEE SENSORS JOURNAL, 16(22), 7967–7976.
author keywords: Flexible electronics; screen-printing; smart textiles; stretchable interconnects; wearable electronics
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2016 journal article
Silver decorated polymer supported semiconductor thin films by UV aided metalized laser printing
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 34(3).
Source: Web Of Science
Added: August 6, 2018
2016 journal article
Ultralight Interconnected Metal Oxide Nanotube Networks
SMALL, 12(18), 2432–2438.
TL;DR:
Record-breaking ultralow density aluminum oxide structures are prepared using a novel templating technique and the application of the low density networks as humidity sensing materials as well as thermal insulation is demonstrated.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2016 journal article
Ultralight Materials: Ultralight Interconnected Metal Oxide Nanotube Networks (Small 18/2016)
Small, 12(18), 2387–2387.
Source: Crossref
Added: February 24, 2020
2015 journal article
Atmospheric pressure synthesis of photoluminescent hybrid materials by sequential organometallic vapor infiltration into polyethylene terephthalate fibers
JOURNAL OF APPLIED PHYSICS, 117(4).
Source: Web Of Science
Added: August 6, 2018
2015 journal article
Depth profiling trimethylaluminum-modified PET fibers by nanoscale infrared spectroscopy
American Laboratory, 47(2), 12–14.
Source: NC State University Libraries
Added: August 6, 2018
2015 journal article
Fabric-Based Wearable Dry Electrodes for Body Surface Biopotential Recording
IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, 63(2), 423–430.
author keywords: Biopotentials; dry electrode; electrocardiography; screen printing; wearable biomedical sensors
MeSH headings : Adult; Body Surface Potential Mapping / instrumentation; Clothing; Electrodes; Equipment Design; Humans; Male; Monitoring, Ambulatory / instrumentation; Printing; Textiles
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Source: Web Of Science
Added: August 6, 2018
2015 journal article
Flexible Technologies for Self-Powered Wearable Health and Environmental Sensing
PROCEEDINGS OF THE IEEE, 103(4), 665–681.
author keywords: Atomic layer deposition; CMUT; environmental monitoring; environmental sensor; flexible electrode; motion harvesting; physiological sensor; piezoelectric; PZT; self-powered; silver nanowire; TEG; thermoelectrics; ultra-low power; ultra-low power SOC; volatile organic compound sensor; wearable device
TL;DR:
The latest advances in high-efficiency nanostructured energy harvesters and storage capacitors, new sensing modalities that consume less power, low power computation, and communication strategies, and novel flexible materials that provide form, function, and comfort are presented.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(Web of Science)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2015 journal article
High performance carbon nanotube - polymer nanofiber hybrid fabrics
NANOSCALE, 7(40), 16744–16754.
Contributors: P. Bradford n, n, X. Zhang n , C. Willis *, C. Stone*, S. Faraji n, K. Stano n, O. Yildiz n
UN Sustainable Development Goal Categories
3. Good Health and Well-being
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2015 journal article
Melt extrusion of polyethylene nanocomposites reinforced with nanofibrillated cellulose from cotton and wood sources
Journal of Applied Polymer Science, 132(17).
Contributors: N. Farahbakhsh n, P. Roodposhti n, A. Ayoub n , R. Venditti n & n
author keywords: biomaterials; extrusion; structure; property relations
Sources: Web Of Science, NC State University Libraries, Crossref, ORCID
Added: August 6, 2018
2015 journal article
Organometallic exposure dependence on organic-inorganic hybrid material formation in polyethylene terephthalate and polyamide 6 polymer fibers
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 33(2).
Source: Web Of Science
Added: August 6, 2018
2015 journal article
Thermal Stability of Gold Nanoparticles Embedded within Metal Oxide Frameworks Fabricated by Hybrid Modifications onto Sacrificial Textile Templates
Langmuir, 31(3), 1135–1141.
Contributors: R. Padbury n, J. Halbur n, P. Krommenhoek n, J. Tracy n & n
TL;DR:
This work demonstrates the entrapment of gold NP's embedded in a porous inorganic matrix using a novel single exposure cycle vapor phase technique to facilitate new complex NP/oxide materials useful for catalytic platforms.
(via Semantic Scholar)
Sources: Crossref, Web Of Science, ORCID
Added: August 6, 2018
2015 conference paper
Wearable wireless sensors for chronic respiratory disease monitoring
2015 IEEE 12th International Conference on Wearable and Implantable Body Sensor Networks (BSN).
TL;DR:
A wearable sensor system consisting of a wristband and chest patch to enable the correlation of individual environmental exposure to health response for understanding impacts of ozone on chronic asthma conditions is presented.
(via Semantic Scholar)
Source: NC State University Libraries
Added: August 6, 2018
2014 journal article
Comparison of precursor infiltration into polymer thin films via atomic layer deposition and sequential vapor infiltration using in-situ quartz crystal microgravimetry
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 32(4).
Source: Web Of Science
Added: August 6, 2018
2014 journal article
Conformal Atomic Layer Deposition of Alumina on Millimeter Tall, Vertically-Aligned Carbon Nanotube Arrays
ACS APPLIED MATERIALS & INTERFACES, 6(21), 19135–19143.
author keywords: carbon nanotube (CNT); atomic layer deposition (ALD); alumina; aligned carbon nanotube array; CNT-inorganic hybrid; plasma; functionalization
TL;DR:
Using thermogravimetric analysis, it was determined that MWCNTs treated with pyrolytic carbon and plasma functionalization prior to ALD coating were more stable to thermal oxidation than pristine ALD coated samples.
(via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2014 journal article
Effect of Polymer Microstructure on the Nucleation Behavior of Alumina via Atomic Layer Deposition
JOURNAL OF PHYSICAL CHEMISTRY C, 118(32), 18805–18813.
Source: Web Of Science
Added: August 6, 2018
2014 journal article
Formation of novel photoluminescent hybrid materials by sequential vapor infiltration into polyethylene terephthalate fibers
JOURNAL OF MATERIALS RESEARCH, 29(23), 2817–2826.
Source: Web Of Science
Added: August 6, 2018
2014 journal article
Mechanical and thermal investigation of thermoplastic nanocomposite films fabricated using micro- and nano-sized fillers from recycled cotton T-shirts
CELLULOSE, 21(4), 2743–2755.
author keywords: Microfibrillated cellulose (MFC); Nanocomposite; Cotton; Cellulose; Sustainable; Synthetic polymer
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2014 journal article
Systematic study of trimethyl aluminum infiltration in polyethylene terephthalate and its effect on the mechanical properties of polyethylene terephthalate fibers
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 33(1).
Source: Web Of Science
Added: August 6, 2018
2014 journal article
Temperature-Dependent Infiltration of Polymers during Sequential Exposures to Trimethylaluminum
LANGMUIR, 30(30), 9228–9238.
TL;DR:
Potential growth mechanisms based on the temperature-dependent observations in this work that enables the ability to produce a customized interface for ALD materials growth on polymer substrates are proposed.
(via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018
2014 journal article
Tuning electrochemical performance of Si-based anodes for lithium-ion batteries by employing atomic layer deposition alumina coating
JOURNAL OF MATERIALS CHEMISTRY A, 2(29), 11417–11425.
UN Sustainable Development Goal Categories
11. Sustainable Cities and Communities
(Web of Science)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2013 journal article
Bi-layer Al2O3/ZnO atomic layer deposition for controllable conductive coatings on polypropylene nonwoven fiber mats
JOURNAL OF APPLIED PHYSICS, 113(19).
Contributors: W. Sweet n, n & G. Parsons n
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2013 journal article
Induced wetting of polytetrafluoroethylene by atomic layer deposition for application of aqueous-based nanoparticle inks
MATERIALS LETTERS, 101, 25–28.
author keywords: PTFE; Atomic layer deposition; Nanoparticle compatibility; Surface energy; Wetting; Al2O3
Source: Web Of Science
Added: August 6, 2018
2013 journal article
Influence of Subsurface Hybrid Material Growth on the Mechanical Properties of Atomic Layer Deposited Thin Films on Polymers
CHEMICAL VAPOR DEPOSITION, 19(4-6), 134–141.
author keywords: ALD nucleation; Flexibility; Hybrid layer; Mechanical properties; PA6
Source: Web Of Science
Added: August 6, 2018
2013 review
Mechanisms and reactions during atomic layer deposition on polymers
[Review of ]. COORDINATION CHEMISTRY REVIEWS, 257(23-24), 3323–3331.
Contributors: G. Parsons n , S. Atanasov n, E. Dandley n, C. Devine n, B. Gong n, n, K. Lee n, C. Oldham n
author keywords: Atomic layer deposition; Polymers; Thin films; Inorganic coatings; Al2O3
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2012 journal article
Mechanisms for hydrophilic/hydrophobic wetting transitions on cellulose cotton fibers coated using Al2O3 atomic layer deposition
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 30(1).
Contributors: K. Lee n, n, D. Kim n & G. Parsons n
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2012 conference paper
Moisture vapor barrier properties of biopolymers for packaging materials
Functional materials from renewable sources, 1107, 271–296.
Source: NC State University Libraries
Added: August 6, 2018
2012 journal article
Nanoscale ceramic surface modification of textiles by atomic layer deposition
American Ceramic Society Bulletin, 91(6), 24–27.
Source: NC State University Libraries
Added: August 6, 2018
2012 journal article
Stable anatase TiO2 coating on quartz fibers by atomic layer deposition for photoactive light-scattering in dye-sensitized solar cells
NANOSCALE, 4(15), 4731–4738.
Contributors: D. Kim n, H. Koo n, n, M. Woodroof n, B. Kalanyan n, K. Lee n, C. Devine n, G. Parsons n
TL;DR:
Results confirm that annealing at high temperature is necessary for better photoactivity of ALD TiO(2), which highlights the significance of quartz fibers as a substrate.
(via Semantic Scholar)
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2012 journal article
Temperature and Exposure Dependence of Hybrid Organic-Inorganic Layer Formation by Sequential Vapor Infiltration into Polymer Fibers
LANGMUIR, 28(44), 15697–15704.
Contributors: H. Akyildiz n, R. Padbury n, G. Parsons n & n
MeSH headings : Aluminum / chemistry; Caprolactam / analogs & derivatives; Caprolactam / chemistry; Organometallic Compounds / chemistry; Particle Size; Polymers / chemistry; Surface Properties; Temperature; Volatilization
TL;DR:
This work investigates the SVI exposure temperature and cycling times of sequential exposures of trimethylaluminum (TMA) on PA6 fiber mats to understand the characteristic growth process, critical for the development of the hybrid materials fabrication and modification techniques.
(via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2011 journal article
Atomic Layer Deposition of Al2O3 and ZnO at Atmospheric Pressure in a Flow Tube Reactor
ACS APPLIED MATERIALS & INTERFACES, 3(2), 299–308.
Contributors: n & G. Parsons n
author keywords: atmospheric pressure; atomic layer deposition; roll-to-roll; textiles; thin film growth; Al2O3; ZnO
TL;DR:
A novel reactor design for inorganic materials growth by ALD at atmospheric pressure using a custom "pressure boost" approach for delivery of low vapor pressure ALD precursors that controls precursor dose independent of reactor pressure is presented and investigated.
(via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2011 journal article
Atomic Layer Deposition of Conductive Coatings on Cotton, Paper, and Synthetic Fibers: Conductivity Analysis and Functional Chemical Sensing Using “All-Fiber” Capacitors
Advanced Functional Materials, 21(11), 1993–2002.
Contributors: n, W. Sweet n, C. Oldham n & G. Parsons n
Sources: Web Of Science, Crossref, ORCID, NC State University Libraries
Added: August 6, 2018
2011 journal article
Effect of temperature and gas velocity on growth per cycle during Al2O3 and ZnO atomic layer deposition at atmospheric pressure
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 30(1).
Contributors: M. Mousa n, C. Oldham n, n & G. Parsons n
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation
(OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2011 journal article
Electronic Textiles: Atomic Layer Deposition of Conductive Coatings on Cotton, Paper, and Synthetic Fibers: Conductivity Analysis and Functional Chemical Sensing Using “All-Fiber” Capacitors (Adv. Funct. Mater. 11/2011)
Advanced Functional Materials, 21(11), 1948–1948.
Sources: Crossref, NC State University Libraries
Added: November 14, 2020
2011 journal article
Encapsulation and Chemical Resistance of Electrospun Nylon Nanofibers Coated Using Integrated Atomic and Molecular Layer Deposition
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 158(9), D549–D556.
Contributors: C. Oldham*, B. Gong*, J. Spagnola n, *, K. Senecal *, T. Godfrey*, G. Parsons*
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2011 journal article
Epitaxial growth of lanthanide oxides La2O3 and Sc2O3 on GaN
APPLIED PHYSICS LETTERS, 98(4).
Source: Web Of Science
Added: August 6, 2018
2011 journal article
Fiber Containment for Improved Laboratory Handling and Uniform Nanocoating of Milligram Quantities of Carbon Nanotubes by Atomic Layer Deposition
Langmuir, 27(23), 14497–14507.
Contributors: C. Devine n, C. Oldham n, n, B. Gong n & G. Parsons n
MeSH headings : Aluminum Oxide / chemistry; Laboratories; Nanostructures / chemistry; Nanotechnology / methods; Nanotubes, Carbon / chemistry; Particle Size; Porosity; Specimen Handling; Surface Properties
TL;DR:
Novel fiber containment methods to improve the handling of carbon nanotube (CNT) powders in the laboratory while simultaneously allowing highly uniform and controlled atomic layer deposition (ALD) coatings on the nanotubes, down to less than 4 nm on some CNT materials are explored.
(via Semantic Scholar)
Sources: Crossref, ORCID, NC State University Libraries
Added: August 28, 2020
2011 journal article
Sequential Vapor Infiltration of Metal Oxides into Sacrificial Polyester Fibers: Shape Replication and Controlled Porosity of Microporous/Mesoporous Oxide Monoliths
Chemistry of Materials, 23(15), 3476–3485.
Contributors: B. Gong n, Q. Peng n, n, C. Devine n, K. Lee n & G. Parsons n
author keywords: porous material; metal oxide; aluminum oxide; titanium oxide; atomic layer deposition; vapor phase infiltration
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, Crossref, ORCID, NC State University Libraries
Added: August 6, 2018
2010 journal article
Surface and sub-surface reactions during low temperature aluminium oxide atomic layer deposition on fiber-forming polymers
JOURNAL OF MATERIALS CHEMISTRY, 20(20), 4213–4222.
Contributors: J. Spagnola n, B. Gong n, S. Arvidson n, n, S. Khan n & G. Parsons n
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018
2010 journal article
Temperature-Dependent Subsurface Growth during Atomic Layer Deposition on Polypropylene and Cellulose Fibers
LANGMUIR, 26(11), 8239–8244.
Contributors: n, J. Spagnola n, K. Lee n, B. Gong n, Q. Peng n & G. Parsons n
MeSH headings : Cellulose / chemistry; Microscopy, Electron, Transmission; Polypropylenes / chemistry; Spectrum Analysis / methods; Temperature; X-Rays
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2009 journal article
Atomic Layer Deposition and Abrupt Wetting Transitions on Nonwoven Polypropylene and Woven Cotton Fabrics
LANGMUIR, 26(4), 2550–2558.
MeSH headings : Aluminum Oxide / chemistry; Cotton Fiber; Materials Testing; Particle Size; Polypropylenes / chemistry; Surface Properties; Wettability
TL;DR:
Infrared analysis shows that ALD can produce a uniform coating throughout the nonwoven polypropylene and woven cotton fabric materials, and the amount of coating can be controlled by the number of ALD cycles.
(via Semantic Scholar)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2009 journal article
Measuring oxygen, carbon monoxide and hydrogen sulfide diffusion coefficient and solubility in Nafion membranes
Electrochimica Acta, 54(27), 6850–6860.
author keywords: Carbon monoxide; Hydrogen sulfide; Oxygen; Diffusion; Solubility; Nafion; Electrochemical monitoring technique
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation
(OpenAlex)
Source: Crossref
Added: August 28, 2020
2008 journal article
Dipole model explaining high-k/metal gate field effect transistor threshold voltage tuning
APPLIED PHYSICS LETTERS, 92(9).
Source: Web Of Science
Added: August 6, 2018
2008 conference paper
Epitaxial growth of high-kappa dielectrics for GaN MOSFETs
Advances in gan, gaas, sic and related alloys on silicon substrates, 1068, 63–68.
Source: NC State University Libraries
Added: August 6, 2018
2008 journal article
High temperature stability of Hf-based gate dielectric stacks with rare-earth oxide layers for threshold voltage control
Applied Physics Letters, 92(11), 112912.
Sources: Web Of Science, Crossref
Added: August 6, 2018
2008 journal article
Thermal Stability of Hf-Based Gate Dielectric Stacks with Rare-Earth Oxide Capping Layers
Microscopy and Microanalysis, 14(S2), 418–419.
Source: Crossref
Added: August 28, 2020
2007 journal article
Analysis of interface states in LaSixOy metal-insulator-semiconductor structures
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 46(10A), 6480–6488.
author keywords: high-k dielectric; MOS capacitor; lanthanum silicate; interface state; fixed charge
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Source: Web Of Science
Added: August 6, 2018
2007 journal article
High temperature stability of lanthanum silicate dielectric on Si (001)
APPLIED PHYSICS LETTERS, 90(10).
Source: Web Of Science
Added: August 6, 2018
2006 journal article
High-temperature stability of lanthanum silicate gate dielectric MIS devices with Ta and TaN electrodes
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 153(9), F210–F214.
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy
(OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
2006 journal article
Work function engineering using lanthanum oxide interfacial layers
APPLIED PHYSICS LETTERS, 89(23).
Source: Web Of Science
Added: August 6, 2018
2005 journal article
Lanthanum silicate gate dielectric stacks with subnanometer equivalent oxide thickness utilizing an interfacial silica consumption reaction
JOURNAL OF APPLIED PHYSICS, 98(2).
Source: Web Of Science
Added: August 6, 2018
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.