@article{liu_wang_sang_li_zhou_zhang_gong_2024, title={Integrating intrinsic and configural superiority into advanced impact-resistant organohydrogels via cryo-assisted direct ink writing}, volume={491}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85192759440&partnerID=MN8TOARS}, DOI={10.1016/j.cej.2024.152109}, journal={Chemical Engineering Journal}, author={Liu, S. and Wang, S. and Sang, M. and Li, Z. and Zhou, J. and Zhang, J. and Gong, X.}, year={2024} }
 @article{liu_liu_pan_zhang_wang_lou_zhou_deng_gong_2024, title={Probing the roles of surface characteristic of suspended nanoparticle in shear thickening suspensions}, volume={659}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85187955477&partnerID=MN8TOARS}, DOI={10.1016/j.apsusc.2024.159910}, journal={Applied Surface Science}, author={Liu, Q. and Liu, B. and Pan, Y. and Zhang, J. and Wang, K. and Lou, C. and Zhou, J. and Deng, H. and Gong, X.}, year={2024} }
 @article{zhang_zhou_wu_zhang_xie_gong_he_ni_2024, title={Simultaneous Enhancement of Thermal Insulation and Impact Resistance in Transparent Bulk Composites}, volume={36}, url={http://dx.doi.org/10.1002/adma.202311817}, DOI={10.1002/adma.202311817}, abstractNote={Transparent bulk glass is highly demanded in devices and components of daily life to transmit light and protect against external temperature and mechanical hazards. However, the application of glass is impeded by its poor functional performance, especially in terms of thermal isolation and impact resistance. Here, a glass composite integrating the nacre-inspired structure and shear stiffening gel (SSG) material is proposed. Benefiting from the combination of these two elements, this nacre-inspired SSG/glass composite (NSG) exhibits superior thermal insulation and impact resistance while maintaining transparency simultaneously. Specifically, the low thermal conductivity of the SSG combined with the anisotropic heat transfer capability of the nacre-inspired structure enhances the out-of-plane thermal insulation of NSG. The deformations over large volumes in nacre-inspired facesheets promote the deformation region of the SSG core, synergistic effect of tablet sliding mechanism in nacre-inspired structure and strain-rate enhancement in SSG material cause the superior impact resistance of overall panels in a wide range of impact velocities. NSG demonstrates outstanding properties such as transparency, light weight, impact resistance, and thermal insulation, which are major concerns for the application in engineering fields. In conclusion, this bioinspired SSG/glass composite opens new avenues to achieve comprehensive performance improvements for transparent structural materials.}, number={16}, journal={Advanced Materials}, author={Zhang, Xiao and Zhou, Jianyu and Wu, Kaijin and Zhang, Shuaishuai and Xie, Lili and Gong, Xinglong and He, Linghui and Ni, Yong}, year={2024}, month={Apr} }
 @article{zhou_liu_wang_zhang_ni_liu_wang_deng_liu_gong_2024, title={“Subconsciousness-triggered” human body defensive strategy: Bi-stability intelligent joint with bionic kirigami structure}, volume={277}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85189089423&partnerID=MN8TOARS}, DOI={10.1016/j.compositesb.2024.111368}, journal={Composites Part B: Engineering}, author={Zhou, J. and Liu, M. and Wang, S. and Zhang, J. and Ni, M. and Liu, S. and Wang, Y. and Deng, H. and Liu, B. and Gong, X.}, year={2024} }
 @article{wu_zhang_sang_li_zhou_wang_xuan_leung_xinglong_2024, title={Acid‐Assisted Toughening Aramid Aerogel Monoliths with Ultralow Thermal Conductivity and Superior Tensile Toughness}, volume={34}, url={http://dx.doi.org/10.1002/adfm.202307072}, DOI={10.1002/adfm.202307072}, abstractNote={Abstract Resisting extreme loading and thermal ablation encountered by aerospace devices demands for high performance engineering materials. Aerogels have achieved satisfactory thermal insulation but the intrinsic brittleness of porous skeletons fail to ensure their normal operation under severe stress fields. Herein, aramid nanofibers (ANFs) are processed into tough 3D aerogel monoliths via a multi‐scale toughening strategy, involving unidirectional freeze‐casting‐enabled microstructure orientation and acid‐assisted nanofiber cross‐linking. Scalable production of ANFs aerogels is realized through fast air‐drying without excessive energy consumption. The aligned sheets in ANFs aerogels enable extreme thermal conductivity of 15.8 mW m −1 K −1 , superinsulation from −130 to 300 °C, and durable combustion protection for 20 min. Particularly, highly aggregated nanofibers assemble into dense ANFs skeletons, endowing the tough aerogels with superior specific tensile strength (89 MPa cm 3 g −1 ), ultra‐high toughness (1.3 MJ m −3 ), and impressive fracture energy (7.36 kJ m −2 ). Such mechanical properties are highly resistant to harsh environments, including water erosion (7 days) and high temperature baking (30 days). Moreover, ANFs aerogels exhibit two to three times more energy dissipation than commercial foams against ballistic impact at 140 m s −1 . This integrated mechanical and thermal robustness may pioneer the potential application in impact‐thermal coupled safeguard for aerogel materials.}, number={2}, journal={Advanced Functional Materials}, author={Wu, Jianpeng and Zhang, Junshuo and Sang, Min and Li, Zimu and Zhou, Jianyu and Wang, Yu and Xuan, Shouhu and Leung, Ken Cham‐Fai and Xinglong, Gong}, year={2024}, month={Jan} }
 @article{wang_wang_liu_zhou_zhang_yuan_sang_gong_2023, title={Advanced functional safeguarding composites with enhanced anti-impact and excellent thermal properties}, volume={53}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85164572518&partnerID=MN8TOARS}, DOI={10.52396/JUSTC-2022-0089}, abstractNote={Personal safety protection has played an important role in daily life. Developing advanced functional safeguarding composites with enhanced anti-impact and excellent thermal properties will be a significant development for body armor. Herein, Kevlar fiber reinforced polymers (KFRP) were fabricated by introducing short Kevlar fibers (KFs) into a shear stiffening elastomer (SSE). The storage modulus of KFRP with 15 wt% KFs (KFRP-15%) increased from 222.8 kPa to 830.8 kPa when the shear frequency varied from 0.1 Hz to 100 Hz. KFRP-15% achieved a higher tensile strength (2.65 MPa) and fracture toughness (11.95 kJ/m<sup>2</sup>) than SSE in the vertical type, showing superior tear resistance. Additionally, KFRP-15% exhibited promising anti-impact properties, which could dissipate the drop hammer impact force from 1.74 kN to 0.56 kN and remained intact after 10 consecutive impacts. Moreover, KFRP-15% also presented excellent stab-resistant performance. In addition, KFRP-15% also showed improved heat transfer properties, flame retardancy, and smoke suppression capabilities. Finally, functional bracers based on KFRP-15% for protection, thermal-dissipation, and flame-retardant were successfully prepared.}, number={4}, journal={Journal of University of Science and Technology of China}, author={Wang, W. and Wang, S. and Liu, S. and Zhou, J. and Zhang, J. and Yuan, F. and Sang, M. and Gong, X.}, year={2023} }
 @article{liu_liu_pan_zhou_zhang_liu_fan_deng_hu_gong_2023, title={An impact-resistant and flame-retardant CNTs/STF/Kevlar composite with conductive property for safe wearable design}, volume={168}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85148538134&partnerID=MN8TOARS}, DOI={10.1016/j.compositesa.2023.107489}, journal={Composites Part A: Applied Science and Manufacturing}, author={Liu, B. and Liu, Q. and Pan, Y. and Zhou, J. and Zhang, J. and Liu, S. and Fan, Z. and Deng, H. and Hu, Y. and Gong, X.}, year={2023} }
 @article{wang_wang_zhou_deng_sun_xue_ma_gong_2023, title={Bio-Inspired Semi-Active Safeguarding Design with Enhanced Impact Resistance via Shape Memory Effect}, volume={33}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85145699791&partnerID=MN8TOARS}, DOI={10.1002/adfm.202212093}, abstractNote={Abstract Inspired by creatures reducing impact damage, a novel semi‐active protection strategy to enhance impact resistance through structural adjustment is proposed. The heat‐activated shape memory composites (PCLE) consisting of polycaprolactone (PCL) and shear stiffening elastomer are first prepared. The PCLE with 50 wt.% PCL (PCLE‐50%) presents tensile strength of 0.46 MPa, fracture strain of 148%, high shape fixity and recovery rates (97.9% and 91.1%), and stable shape‐memory repeatability. Furthermore, various PCLE‐50%‐based structures are fabricated, which show reinforced anti‐impact performance after shape‐shifting. Loading from 300 mm, the maximum drop hammer impact force of no protection, PCLE‐50%, and deformed assembled single‐branch structure are 3.98 kN, 1.75 kN, and 0.93 kN, respectively. Additionally, assembled complex structures also exhibit exceptional energy absorption properties. Ultimately, intelligent clothing is successfully manufactured. Besides good anti‐impact effect, the clothing shows excellent thermal insulation capabilities whose surface temperature is 31.7 °C after heating for 600 s at 42 °C. This study provides an innovative means to develop deformable, wearable, and intelligent protective devices.}, number={13}, journal={Advanced Functional Materials}, author={Wang, W. and Wang, S. and Zhou, J. and Deng, H. and Sun, S. and Xue, T. and Ma, Y. and Gong, X.}, year={2023} }
 @article{zhou_wang_zhang_wang_deng_sun_liu_wang_wu_gong_2023, title={Enhancing Bioinspired Aramid Nanofiber Networks by Interfacial Hydrogen Bonds for Multiprotection under an Extreme Environment}, volume={17}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85147271340&partnerID=MN8TOARS}, DOI={10.1021/acsnano.2c10460}, abstractNote={In nature, many insects have evolved sclerotic cuticles to shelter their soft bodies, which are considered as "body armor". For beetles, the epidermis is composed of cross-linked intertwined fiber structures; such a fiber network structure could provide an anti-impact function for composites. Aramid nanofibers (ANFs) are of great interest in various applications due to their 1D nanoscale, high aspect ratio, excellent strength and modulus, and impressive chemical and thermal stability. In this paper, a kind of ANF network is prepared by a layer-by-layer assembly method. The enhancing ANF networks are developed by introducing carboxylated chitosan acting as a hydrogen-bondin donors as well as a soft interlocking agent (C-ANFs). As a result of the formation of a nanostructure and the hydrogen-bond interactions, the assembled C-ANF networks presented a high tensile strength (551.4 MPa) and toughness (4.0 MJ/m2), which is 2.41 times and 32.69 times those of neat ANF networks, respectively. The excellent mechanical properties endow C-ANF networks with distinguished anti-impact performance. The specific dissipated energy after mass normalization reaches 7.34 MJ/kg, which is significantly superior to traditional protective materials such as steel and Kevlar composites. A nonlinear spring model is also used to explain the mechanical behavior of C-ANF networks. In addition to anti-impact protection, C-ANF networks can realize more than 99% of UV irradiation absorption and have excellent thermal stability. The chemical stability of C-ANF networks make them survive in acid and alkali environments. The above characteristics show that C-ANF networks have great application value in multiscale protection scenarios under an extreme environment.}, number={4}, journal={ACS Nano}, author={Zhou, J. and Wang, S. and Zhang, J. and Wang, Y. and Deng, H. and Sun, S. and Liu, S. and Wang, W. and Wu, J. and Gong, X.}, year={2023}, pages={3620–3631} }
 @article{liu_wang_sang_zhou_xuan_zhang_xuan_gong_2023, title={Hierarchical polyimide-polyborosiloxane host-guest structure with impact resistance, acoustic and thermal insulation performance for electro-stability applications}, volume={473}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85167407769&partnerID=MN8TOARS}, DOI={10.1016/j.cej.2023.145214}, journal={Chemical Engineering Journal}, author={Liu, S. and Wang, S. and Sang, M. and Zhou, J. and Xuan, T. and Zhang, J. and Xuan, S. and Gong, X.}, year={2023} }
 @article{zhang_wang_wu_zhou_wang_liu_pan_sang_liu_gong_2023, title={STF-filled biomimetic variable stiffness hierarchic porous material with impact resistance, thermal insulation, and sensing}, volume={477}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85175483633&partnerID=MN8TOARS}, DOI={10.1016/j.cej.2023.146939}, journal={Chemical Engineering Journal}, author={Zhang, J. and Wang, Y. and Wu, J. and Zhou, J. and Wang, W. and Liu, S. and Pan, Y. and Sang, M. and Liu, B. and Gong, X.}, year={2023} }
 @article{zhang_wang_deng_zhou_liu_wu_sang_gong_2022, title={A high anti-impact STF/Ecoflex composite structure with a sensing capacity for wearable design}, volume={233}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85123170268&partnerID=MN8TOARS}, DOI={10.1016/j.compositesb.2022.109656}, journal={Composites Part B: Engineering}, author={Zhang, J. and Wang, Y. and Deng, H. and Zhou, J. and Liu, S. and Wu, J. and Sang, M. and Gong, X.}, year={2022} }
 @article{chen_zhou_liu_wang_gong_2022, title={A novel anti-impact and flame retardant gel towards human protection and high-temperature alarm}, volume={158}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85130313065&partnerID=MN8TOARS}, DOI={10.1016/j.compositesa.2022.106994}, journal={Composites Part A: Applied Science and Manufacturing}, author={Chen, H. and Zhou, J. and Liu, S. and Wang, S. and Gong, X.}, year={2022} }
 @article{yuan_wang_liu_zhou_wang_wang_deng_xuan_gong_2022, title={A self-powered three-dimensional integrated e-skin for multiple stimuli recognition}, volume={451}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85135944527&partnerID=MN8TOARS}, DOI={10.1016/j.cej.2022.138522}, journal={Chemical Engineering Journal}, author={Yuan, F. and Wang, W. and Liu, S. and Zhou, J. and Wang, S. and Wang, Y. and Deng, H. and Xuan, S. and Gong, X.}, year={2022} }
 @article{sang_zhang_liu_zhou_wang_deng_li_li_xuan_gong_2022, title={Advanced MXene/shear stiffening composite-based sensor with high-performance electromagnetic interference shielding and anti-impacting Bi-protection properties for smart wearable device}, volume={440}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85126888499&partnerID=MN8TOARS}, DOI={10.1016/j.cej.2022.135869}, journal={Chemical Engineering Journal}, author={Sang, M. and Zhang, J. and Liu, S. and Zhou, J. and Wang, Y. and Deng, H. and Li, J. and Li, J. and Xuan, S. and Gong, X.}, year={2022} }
 @article{liu_fan_yuan_sang_zhou_zhang_xuan_wang_gong_2022, title={Enabling thermally enhanced vibration attenuation via biomimetic Zr–fumarate MOF-based shear thickening fluid}, volume={239}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85129927345&partnerID=MN8TOARS}, DOI={10.1016/j.compositesb.2022.109964}, journal={Composites Part B: Engineering}, author={Liu, S. and Fan, X. and Yuan, F. and Sang, M. and Zhou, J. and Zhang, J. and Xuan, S. and Wang, S. and Gong, X.}, year={2022} }
 @article{chen_zhou_liu_wang_gong_2022, title={Flame-Retardant Triboelectric Generator with Stable Thermal-Mechanical-Electrical Coupling Performance for Fire Bluetooth Alarm System}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85176984141&partnerID=MN8TOARS}, DOI={10.2139/ssrn.4093762}, abstractNote={A novel triboelectric nanogenerators (TENG) device with energy-harvesting, safeguarding properties was developed based on the anti-impact and flame retardant elastomers (AFEs). The AFE composite was fabricated via the introduction of urea and carbon nanotubes (CNTs) into shear stiffening elastomer (SSE). The limiting oxygen index (LOI) value of 6AFE-25 (AFE contained 6% CNTs and 25% urea) was 30.5% and could reach V-0 rating. The peak of heat release rate of 6AFE-25 achieved 224.79 kW/m 2 , which was decreased by 29.10% compared with neat SSE. More importantly, the optimized TENG with thickness of 4 mm exhibited a maximum power of 57.25 μW at voltage of 22.70 V which enabled to act as a wearable power source to actuate electronics. Besides, the TENG enabled to dissipate impact force from 5199 to 386 N, exhibiting a remarkable safeguarding performance. Owing to good self-healing property, the thermal-electrical-mechanical coupling performance of the reported TENG device kept stable even after cutting damage and 20 s-fire attack. Finally, a self-powered Bluetooth fire alarm system was developed which could be used in fire rescue.}, journal={SSRN}, author={Chen, H. and Zhou, J. and Liu, S. and Wang, S. and Gong, X.}, year={2022} }
 @article{chen_zhou_liu_wang_gong_2022, title={Flame-retardant triboelectric generator with stable thermal-mechanical-electrical coupling performance for fire Bluetooth alarm system}, volume={102}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85135129610&partnerID=MN8TOARS}, DOI={10.1016/j.nanoen.2022.107634}, journal={Nano Energy}, author={Chen, H. and Zhou, J. and Liu, S. and Wang, S. and Gong, X.}, year={2022} }
 @article{zhou_wang_zhang_liu_wang_yuan_gong_2022, title={Intelligent body armor: Advanced Kevlar based integrated energy devices for personal safeguarding}, volume={161}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85134651445&partnerID=MN8TOARS}, DOI={10.1016/j.compositesa.2022.107083}, journal={Composites Part A: Applied Science and Manufacturing}, author={Zhou, J. and Wang, S. and Zhang, J. and Liu, S. and Wang, W. and Yuan, F. and Gong, X.}, year={2022} }
 @article{fan_zhao_wu_cai_zhou_zhang_gong_xuan_2022, title={Intelligent safeguarding Leather with excellent energy absorption via the toughness-flexibility coupling designation}, volume={161}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85134571666&partnerID=MN8TOARS}, DOI={10.1016/j.compositesa.2022.107078}, journal={Composites Part A: Applied Science and Manufacturing}, author={Fan, Z. and Zhao, C. and Wu, J. and Cai, Y. and Zhou, J. and Zhang, J. and Gong, X. and Xuan, S.}, year={2022} }
 @article{xuan_wang_sun_deng_wang_zhang_liu_lou_chen_zhou_et al._2023, title={Lightweight shear stiffening gel with enhanced mechanical and thermal-insulating performance for advanced fire suit}, volume={164}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85141891605&partnerID=MN8TOARS}, DOI={10.1016/j.compositesa.2022.107312}, journal={Composites Part A: Applied Science and Manufacturing}, author={Xuan, T. and Wang, S. and Sun, S. and Deng, H. and Wang, W. and Zhang, J. and Liu, S. and Lou, C. and Chen, H. and Zhou, J. and et al.}, year={2023} }
 @article{zhang_wang_zhou_wu_liu_sang_liu_pan_gong_2023, title={Multi-functional STF-based yarn for human protection and wearable systems}, volume={453}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85140248059&partnerID=MN8TOARS}, DOI={10.1016/j.cej.2022.139869}, journal={Chemical Engineering Journal}, author={Zhang, J. and Wang, Y. and Zhou, J. and Wu, J. and Liu, S. and Sang, M. and Liu, B. and Pan, Y. and Gong, X.}, year={2023} }
 @article{liu_wang_sang_zhou_zhang_xuan_gong_2022, title={Nacre-Mimetic Hierarchical Architecture in Polyborosiloxane Composites for Synergistically Enhanced Impact Resistance and Ultra-Efficient Electromagnetic Interference Shielding}, volume={16}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85141553848&partnerID=MN8TOARS}, DOI={10.1021/acsnano.2c08104}, abstractNote={Pervasive mechanical impact is growing requirement for advanced high-performance protective materials, while the electromagnetic interference (EMI) confers severe risk to human health and equipment operation. Bioinspired structural composites achieving outstanding safeguards against a single threat have been developed, whereas the synergistic implementation of impact/EMI coupling protection remains a challenge. This work proposes the concept of nacre-mimetic hierarchical composite duplicating the "brick-and-mortar" arrangement, which consists of freeze-drying constructed chitosan/MXene lamellar architecture skeleton embedded in a shear stiffening polyborosiloxane matrix. The resulting composite effectively attenuates the impact force of 85.9%-92.8% with extraordinary energy dissipation capacity, in the coordinative manner of strain-rate enhancement, structural densification, lamella dislocation and crack propagation. Attributed to the alternate laminated structure promoting the reflection loss of electromagnetic waves, it demonstrates an ultraefficient EMI shielding effectiveness of 47.2-71.8 dB within extremely low MXene loadings of 1.1-1.3 wt %. Furthermore, it serves favorably in impact monitoring and wireless alarm systems and accomplishes performance optimization through the combination of multiple biomimetic strategies. In conclusion, this function-integrated structural composite is shown to be a competitive candidate for sophisticated environments by resisting impact damage and EMI hazards.}, number={11}, journal={ACS Nano}, author={Liu, S. and Wang, S. and Sang, M. and Zhou, J. and Zhang, J. and Xuan, S. and Gong, X.}, year={2022}, pages={19067–19086} }
 @article{zhou_zhang_sang_liu_yuan_wang_sun_gong_2022, title={Advanced functional Kevlar composite with excellent mechanical properties for thermal management and intelligent safeguarding}, volume={428}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85114083732&partnerID=MN8TOARS}, DOI={10.1016/j.cej.2021.131878}, journal={Chemical Engineering Journal}, author={Zhou, J. and Zhang, J. and Sang, M. and Liu, S. and Yuan, F. and Wang, S. and Sun, S. and Gong, X.}, year={2022} }
 @article{wang_zhou_wang_yuan_liu_zhang_gong_2022, title={Enhanced Kevlar-based triboelectric nanogenerator with anti-impact and sensing performance towards wireless alarm system}, volume={91}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85118566378&partnerID=MN8TOARS}, DOI={10.1016/j.nanoen.2021.106657}, journal={Nano Energy}, author={Wang, W. and Zhou, J. and Wang, S. and Yuan, F. and Liu, S. and Zhang, J. and Gong, X.}, year={2022} }
 @article{zhou_wang_yuan_zhang_liu_zhao_wang_gong_2021, title={Functional Kevlar-Based Triboelectric Nanogenerator with Impact Energy-Harvesting Property for Power Source and Personal Safeguard}, volume={13}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85100603146&partnerID=MN8TOARS}, DOI={10.1021/acsami.0c18308}, abstractNote={A novel shock-resistant, self-generating triboelectric nanogenerator (SS-TENG) with high-speed impact energy-harvesting and safeguarding properties was developed by assembling Kevlar fiber and conductive shear-stiffening gel. The SS-TENG with energy-harvesting property generated a maximum power density of 5.3 mW/m2 with a voltage of 13.1 V under oscillator compression and could light up light-emitting diode arrays. Owing to the energy absorption effect, the as-designed SS-TENG could dissipate impact forces from 2880 to 1460 N, showing anti-impact performance under the drop hammer impact. It also sensed the loading forces by outputting 36.4 V. Functionalized as a self-powered sensor, SS-TENG monitored various human movements and provided protection from hammer impact. Interestingly, a wearable sole array with high sensitivity and a fast response could distinguish toe in/out motions. More importantly, this functional SS-TENG presented excellent anti-impact behavior, which dissipated 94% of kinetic energy under bullet-shooting excitation. It also gathered high speed ballistic energy, which outputted a maximum power density of 3 mW/m2. To this end, this SS-TENG with a protection effect and the ability to harvest various impact energy showed promising applications in new power sources, intelligent wearable systems, and safeguard areas.}, number={5}, journal={ACS Applied Materials and Interfaces}, author={Zhou, J. and Wang, S. and Yuan, F. and Zhang, J. and Liu, S. and Zhao, C. and Wang, Y. and Gong, X.}, year={2021}, pages={6575–6584} }
 @article{liu_yuan_sang_zhou_zhang_wang_li_xuan_gong_2021, title={Functional sponge-based triboelectric nanogenerators with energy harvesting, oil-water separating and multi-mode sensing performance}, volume={9}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85102980457&partnerID=MN8TOARS}, DOI={10.1039/d0ta12359e}, abstractNote={A multi-functional triboelectric nanogenerator (TENG) is developed, which enables to sense mechanical/magnetic stimuli in the self-powered manner, and presents favorable magneto-driven and target recognization performance for spilled oil treatment.}, number={11}, journal={Journal of Materials Chemistry A}, author={Liu, S. and Yuan, F. and Sang, M. and Zhou, J. and Zhang, J. and Wang, S. and Li, J. and Xuan, S. and Gong, X.}, year={2021}, pages={6913–6923} }
 @article{zhang_wang_zhou_zhao_wu_liu_gong_2021, title={Intralayer interfacial sliding effect on the anti-impact performance of STF/Kevlar composite fabric}, volume={145}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85103694238&partnerID=MN8TOARS}, DOI={10.1016/j.compositesa.2021.106401}, journal={Composites Part A: Applied Science and Manufacturing}, author={Zhang, J. and Wang, Y. and Zhou, J. and Zhao, C. and Wu, Y. and Liu, S. and Gong, X.}, year={2021} }
 @article{wu_wang_zhang_sang_xu_zhou_wang_cai_xuan_gong_2022, title={Liquid or solid? a biologically inspired concentrated suspension for protective coating}, volume={428}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85112849240&partnerID=MN8TOARS}, DOI={10.1016/j.cej.2021.131793}, journal={Chemical Engineering Journal}, author={Wu, Y. and Wang, W. and Zhang, J. and Sang, M. and Xu, Y. and Zhou, J. and Wang, S. and Cai, Y. and Xuan, S. and Gong, X.}, year={2022} }
 @article{zhou_an_zhou_wang_li_2021, title={On new buckling solutions of moderately thick rectangular plates by the symplectic superposition method within the Hamiltonian-system framework}, volume={94}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85100277617&partnerID=MN8TOARS}, DOI={10.1016/j.apm.2021.01.020}, journal={Applied Mathematical Modelling}, author={Zhou, C. and An, D. and Zhou, J. and Wang, Z. and Li, R.}, year={2021}, pages={226–241} }
 @article{yuan_liu_zhou_wang_wang_xuan_gong_2021, title={Smart touchless triboelectric nanogenerator towards safeguard and 3D morphological awareness}, volume={86}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85104471439&partnerID=MN8TOARS}, DOI={10.1016/j.nanoen.2021.106071}, journal={Nano Energy}, author={Yuan, F. and Liu, S. and Zhou, J. and Wang, S. and Wang, Y. and Xuan, S. and Gong, X.}, year={2021} }
 @article{yuan_liu_zhou_fan_wang_gong_2020, title={A smart Kevlar-based triboelectric nanogenerator with enhanced anti-impact and self-powered sensing properties}, volume={29}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85095979112&partnerID=MN8TOARS}, DOI={10.1088/1361-665X/abaf08}, abstractNote={Abstract A novel single electrode triboelectric nanogenerator (TENG) with high energy-harvesting performance and safeguarding behavior has been developed by integrating carbon nanotubes (CNTs) and shear stiffening gel (SSG) on Kevlar fabric. The output voltage and power of the three layer structure SSG/CNTs/Kevlar-based TENG (S-TENG) reaches to as high as 41.27 V and 212.90 μ W, respectively. Due to the good triboelectric property, S-TENG also acts as a wearable self-powered device to harvest as well as monitor various human motions. More importantly, when impacted by a 1.26 kg impactor dropping from 30 cm, S-TENG with enhancing stiffness can not only resist the impact force, but also gather dynamic impact energy by producing an output voltage of 1.50 V. Finally, the mechanical and the electric properties of the S-TENG under the heavy hammer impact and quasi-static piercing has simultaneously investigated. In comparison to the neat Kevlar (7.66 J), the critical impact energy resisted by S-TENG is as high as 19.16 J, indicating a better anti-impacted property. Because of the excellent triboelectric and anti-impact properties, the smart S-TENG with self-power sensing, energy-gathering and safeguarding performance possesses high potential in next generation of body armor materials, robots, wearable electronics and human-machine interactions.}, number={12}, journal={Smart Materials and Structures}, author={Yuan, F. and Liu, S. and Zhou, J. and Fan, X. and Wang, S. and Gong, X.}, year={2020} }
 @article{wang_yuan_liu_zhou_xuan_wang_gong_2020, title={A smart triboelectric nanogenerator with tunable rheological and electrical performance for self-powered multi-sensors}, volume={8}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85082397497&partnerID=MN8TOARS}, DOI={10.1039/c9tc05969e}, abstractNote={A smart triboelectric nanogenerator with controllable mechanical and energy-harvesting properties has been developed, and the self-powered sensing performance for multiple fields was demonstrated.}, number={11}, journal={Journal of Materials Chemistry C}, author={Wang, S. and Yuan, F. and Liu, S. and Zhou, J. and Xuan, S. and Wang, Y. and Gong, X.}, year={2020}, pages={3715–3723} }
 @article{wang_liu_zhou_li_li_cao_li_zhang_li_wang_et al._2020, title={Advanced triboelectric nanogenerator with multi-mode energy harvesting and anti-impact properties for smart glove and wearable e-textile}, volume={78}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85089852671&partnerID=MN8TOARS}, DOI={10.1016/j.nanoen.2020.105291}, journal={Nano Energy}, author={Wang, S. and Liu, S. and Zhou, J. and Li, F. and Li, J. and Cao, X. and Li, Z. and Zhang, J. and Li, B. and Wang, Y. and et al.}, year={2020} }
 @article{ullah_zhou_zhang_zhou_wang_zhong_wang_li_2020, title={New Analytic Shear Buckling Solution of Clamped Rectangular Plates by a Two-Dimensional Generalized Finite Integral Transform Method}, volume={20}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-85075810791&partnerID=MN8TOARS}, DOI={10.1142/S0219455420710029}, abstractNote={A first attempt is made in this paper to explore new analytic shear buckling solution of clamped rectangular thin plates by a two-dimensional generalized finite integral transform method. The problem is classical but challenging due to the mathematical difficulty in handling the complex boundary value problem of the governing higher-order partial differential equation (PDE). Taking the vibrating beam functions as the integral kernels, and imposing the double transform, the problem comes down to solving a system of linear algebraic equations, thereby the analytic solution is obtained in a straightforward way. The present method is confirmed to be highly accurate with fast convergence, which agrees very well with both the finite element method (FEM) and energy method from the literature. The new analytic solution obtained may serve as a benchmark for validating other numerical and approximate methods.}, number={2}, journal={International Journal of Structural Stability and Dynamics}, author={Ullah, S. and Zhou, J. and Zhang, J. and Zhou, C. and Wang, H. and Zhong, Y. and Wang, B. and Li, R.}, year={2020} }