@article{min_bagal_mundy_oldham_wu_parsons_chang_2016, title={Fabrication and design of metal nano-accordion structures using atomic layer deposition and interference lithography}, volume={8}, ISSN={["2040-3372"]}, url={http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcAuth=ORCID&SrcApp=OrcidOrg&DestLinkType=FullRecord&DestApp=WOS_CPL&KeyUT=WOS:000371479000021&KeyUID=WOS:000371479000021}, DOI={10.1039/c5nr08566g}, abstractNote={Fabricated free-standing platinum nano-accordion structures with a wide variety of cross-sectional profiles using a combination of ALD and IL.}, number={9}, journal={NANOSCALE}, author={Min, J. -H. and Bagal, A. and Mundy, J. Z. and Oldham, C. J. and Wu, B. -I. and Parsons, G. N. and Chang, C. -H.}, year={2016}, pages={4984–4990} }
 @article{mundy_shafiefarhood_li_khan_parsons_2016, title={Low temperature platinum atomic layer deposition on nylon-6 for highly conductive and catalytic fiber mats}, volume={34}, ISSN={["1520-8559"]}, url={http://www.scopus.com/inward/record.url?eid=2-s2.0-84953317899&partnerID=MN8TOARS}, DOI={10.1116/1.4935448}, abstractNote={Low temperature platinum atomic layer deposition (Pt-ALD) via (methylcyclopentadienyl)trimethyl platinum and ozone (O3) is used to produce highly conductive nonwoven nylon-6 (polyamide-6, PA-6) fiber mats, having effective conductivities as high as ∼5500–6000 S/cm with only a 6% fractional increase in mass. The authors show that an alumina ALD nucleation layer deposited at high temperature is required to promote Pt film nucleation and growth on the polymeric substrate. Fractional mass gain scales linearly with Pt-ALD cycle number while effective conductivity exhibits a nonlinear trend with cycle number, corresponding to film coalescence. Field-emission scanning electron microscopy reveals island growth mode of the Pt film at low cycle number with a coalesced film observed after 200 cycles. The metallic coating also exhibits exceptional resistance to mechanical flexing, maintaining up to 93% of unstressed conductivity after bending around cylinders with radii as small as 0.3 cm. Catalytic activity of the as-deposited Pt film is demonstrated via carbon monoxide oxidation to carbon dioxide. This novel low temperature processing allows for the inclusion of highly conductive catalytic material on a number of temperature-sensitive substrates with minimal mass gain for use in such areas as smart textiles and flexible electronics.}, number={1}, journal={JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A}, author={Mundy, J. Zachary and Shafiefarhood, Arya and Li, Fanxing and Khan, Saad A. and Parsons, Gregory N.}, year={2016}, month={Jan} }
 @article{daubert_lewis_gotsch_mundy_monroe_dickey_losego_parsons_2015, title={Effect of Meso- and Micro-Porosity in Carbon Electrodes on Atomic Layer Deposition of Pseudocapacitive V2O5 for High Performance Supercapacitors}, volume={27}, ISSN={0897-4756 1520-5002}, url={http://dx.doi.org/10.1021/acs.chemmater.5b01602}, DOI={10.1021/acs.chemmater.5b01602}, abstractNote={Atomic layer deposition (ALD) of vanadium oxide is a viable means to add pseudocapacitive layers to porous carbon electrodes. Two commercial activated carbon materials with different surface areas and pore structures were acid treated and coated by V2O5 ALD using vanadium triisopropoxide and water at 150 °C. The V2O5 ALD process was characterized at various temperatures to confirm saturated ALD growth conditions. Capacitance and electrochemical impedance analysis of subsequently constructed electrochemical capacitors (ECs) showed improved charge storage for the ALD coated electrodes, but the extent of improvement depended on initial pore structure. The ALD of V2O5 onto mesoporous carbon increased the capacitance by up to 46% after 75 ALD cycles and obtained a maximum pseudocapacitance of 540 F/g(V2O5) after 25 ALD cycles, while maintaining low electrical resistance, high columbic efficiency, and a high cycle life. However, adding V2O5 ALD to microporous carbons with pore diameters of <11 A showed far less...}, number={19}, journal={Chemistry of Materials}, publisher={American Chemical Society (ACS)}, author={Daubert, James S. and Lewis, Neal P. and Gotsch, Hannah N. and Mundy, J. Zachary and Monroe, David N. and Dickey, Elizabeth C. and Losego, Mark D. and Parsons, Gregory N.}, year={2015}, month={Sep}, pages={6524–6534} }