Kinga Angelika Unocic

Butene-Rich Alkene Formation from 2,3-Butanediol through Dioxolane Intermediates

ACS Sustainable Chemistry & Engineering, 12(23), 8702–8716.

Dynamic Copper Site Redispersion through Atom Trapping in Zeolite Defects

Journal of the American Chemical Society, 146(12), 8280–8297.

Tuning Surface, Phase, and Magnetization of Superparamagnetic Magnetite by Ionic Liquids: Single-Step Microwave-Assisted Synthesis

ACS Applied Materials & Interfaces, 4.

Additive manufacturing as a processing route for steel-aluminum bimetallic structures

Materials & Design, 231, 112003.

Advancements and challenges in the production of low-carbon fuels <i>via</i> catalytic fast pyrolysis of biomass through refinery integration and co-product generation

Green Chemistry, 25(17), 6809–6822.

Compositional dependence of hydrodeoxygenation pathway selectivity for Ni_2−<i>x</i>Rh_<i>x</i>P nanoparticle catalysts

Journal of Materials Chemistry A, 11(31), 16788–16802.

Experimental and computational studies of the production of 1,3-butadiene from 2,3-butanediol using SiO2-supported H3PO4 derivatives

Chemical Engineering Journal, 466, 143346.

Hardness Measurements and Interface Behavior of SiC-B4C-Si Multiple Phase Particulate Composites Made with Melt Infiltration and Additive Manufacturing

Journal of Composites Science, 7(4), 172.

Investigation of Cu Species in Dealuminated Beta Zeolite Studied by <i>Operando</i> Closed-Cell Gas Reaction STEM

Microscopy and Microanalysis, 29(Supplement_1), 1614–1615.

Multimodal Characterization of Stored Energy and Gas-Filled Cavities in FCC Alloys Irradiated with Spallation Neutrons and High-Energy Protons

Microscopy and Microanalysis, 29(Supplement_1), 1538–1540.

Professor Wilbur C. Bigelow: A Centenary Celebration

Microscopy and Microanalysis, 29(Supplement_1), 1566–1568.

Revealing atomic-to-nanoscale oxidation mechanisms of metallic materials

MRS Bulletin, 48(8), 852–863.

Tailoring olefin distribution via tuning rare earth metals in bifunctional Cu-RE/beta-zeolite catalysts for ethanol upgrading

Applied Catalysis B: Environmental, 344, 123648.

Controlled Synthesis of Transition Metal Phosphide Nanoparticles to Establish Composition-Dependent Trends in Electrocatalytic Activity

Chemistry of Materials, 34(14), 6255–6267.

Deactivation study on zeolite materials using XPS and STEM characterization

Microscopy and Microanalysis, 28(S1), 2472–2474.

Direct 2,3-Butanediol Conversion to Butene-Rich C₃₊ Olefins over Copper-Modified 2D Pillared MFI: Consequence of Reduced Diffusion Length

ACS Sustainable Chemistry & Engineering, 10(4), 1664–1674.

Ethanol Conversion to C₄₊ Olefins over Bimetallic Copper- And Lanthanum-Containing Beta Zeolite Catalysts

ACS Sustainable Chemistry & Engineering, 10(18), 5702–5707.

High temperature high strength austenitic steel fabricated by laser powder-bed fusion

Acta Materialia, 231, 117876.

Improved irradiation resistance of accident-tolerant high-strength FeCrAl alloys with heterogeneous structures

Acta Materialia, 231, 117843.

Observations of radiation-enhanced ductility in irradiated Inconel 718: Tensile properties, deformation behavior, and microstructure

Acta Materialia, 231, 117889.

Revealing the Reaction Behavior of Co0.86Mn0.14O under H2 using <i>in situ</i> Closed-Cell Gas Reaction S/TEM

Microscopy and Microanalysis, 28(S1), 1884–1886.

Supercritical Methanol Solvolysis and Catalysis for the Conversion of Delignified Woody Biomass into Light Alcohol Gasoline Bioblendstock

Advanced Sustainable Systems, 6(4).

2D High‐Entropy Transition Metal Dichalcogenides for Carbon Dioxide Electrocatalysis

Advanced Materials, 33(31).

Analytical modeling of the evolution of the nonlinearity parameter of sensitized stainless steel

Journal of Applied Physics, 130(16).

Atomic Layer Deposition with TiO₂ for Enhanced Reactivity and Stability of Aromatic Hydrogenation Catalysts

ACS Catalysis, 11(14), 8538–8549.

Catalyst design to direct high-octane gasoline fuel properties for improved engine efficiency

Applied Catalysis B: Environmental, 301, 120801.

Catalytic activity and water stability of the MgO(111) surface for 2-pentanone condensation

Applied Catalysis B: Environmental, 294, 120234.

Deactivation by Potassium Accumulation on a Pt/TiO₂ Bifunctional Catalyst for Biomass Catalytic Fast Pyrolysis

ACS Catalysis, 12(1), 465–480.

Effect of heterogeneous microstructure on the tensile and creep performances of cast Haynes 282 alloy

Materials Science and Engineering: A, 828, 142099.

Evolution of the structure and chemical composition of the interface between multi-component silicate glasses and yttria-stabilized zirconia after 40,000 h exposure in air at 800 °C

Journal of the European Ceramic Society, 42(4), 1576–1584.

In Situ TEM Investigation of the Spontaneous Hollowing of Alloy Anode Nanocrystals

Microscopy and Microanalysis, 27(S1), 1972–1973.

Isolated Metal Sites in Cu–Zn–Y/Beta for Direct and Selective Butene-Rich C₃₊ Olefin Formation from Ethanol

ACS Catalysis, 11(15), 9885–9897.

Microstructure Evolution of Low Carbon Steel via Flash Processing

Microscopy and Microanalysis, 27(S1), 156–158.

Performing <em>In Situ</em> Closed-Cell Gas Reactions in the Transmission Electron Microscope

Journal of Visualized Experiments, 7(173).

Practical Aspects of Performing Quantitive EELS Measurements of Gas Compositions in Closed-Cell Gas Reaction S/TEM

Microscopy and Microanalysis, 27(S1), 796–798.

Precipitation behavior near shrinkage porosity in a large sand casting of Haynes 282 alloy

Materialia, 15, 101035.

Residual stresses and microstructure within Allvac 718Plus laser powder bed fusion bars

Additive Manufacturing, 47, 102334.

Selective Butene Formation in Direct Ethanol-to-C₃₊-Olefin Valorization over Zn–Y/Beta and Single-Atom Alloy Composite Catalysts Using In Situ-Generated Hydrogen

ACS Catalysis, 11(12), 7193–7209.

Structural Interconversion between Agglomerated Palladium Domains and Mononuclear Pd(II) Cations in Chabazite Zeolites

Chemistry of Materials, 33(5), 1698–1713.

Toward net-zero sustainable aviation fuel with wet waste–derived volatile fatty acids

Proceedings of the National Academy of Sciences, 118(13).

A hybrid pathway to biojet fuel via 2,3-butanediol

Sustainable Energy & Fuels.

Dehydrogenative Coupling of Methanol for the Gas-Phase, One-Step Synthesis of Dimethoxymethane over Supported Copper Catalysts

ACS Sustainable Chemistry & Engineering, 8(32), 12151–12160.

In Situ Transmission Electron Microscopy Study on the Deformation Responses of Additively Manufactured Multiphase Ni-based Superalloy

Microscopy and Microanalysis, 26(S2), 1844–1846.

In situ transmission electron microscopy deformation and mechanical responses of additively manufactured Ni-based superalloy

Scripta Materialia, 186, 57–62.

In-situ Micromechanical Testing of Neutron Irradiated FeCrAl Alloys

Microscopy and Microanalysis, 26(S2), 646–647.

Introducing and Controlling Water Vapor in Closed-Cell <i>In Situ</i> Electron Microscopy Gas Reactions

Microscopy and Microanalysis, 26(2), 229–239.

Microstructural Evaluation of Welded Nickel-Based Superalloy Inconel 740H After Creep Testing

JOM, 72(5), 1811–1821.

Multi-scale Characterization Study Enabling Deactivation Mechanism in Formed Zeolite Catalyst

Microscopy and Microanalysis, 26(S2), 1270–1271.

Operando</i> S/TEM Reactions of Pt/TiO₂ Catalysts for Catalytic Fast Pyrolysis

Microscopy and Microanalysis, 26(S2), 1696–1697.

Single-phase catalysis for reductive etherification of diesel bioblendstocks

Green Chemistry.

Spontaneous and reversible hollowing of alloy anode nanocrystals for stable battery cycling

Nature Nanotechnology, 15(6), 475–481.

Steam oxidation of ytterbium disilicate environmental barrier coatings with and without a silicon bond coat

Journal of the American Ceramic Society, 104(5), 2285–2300.

Technical Qualification of New Materials for High Efficiency Coal-Fired Boilers and Other Advanced FE Concepts: Haynes® 282® ASME Boiler and Pressure Vessel Code Case

The effect of Zr on precipitation in oxide dispersion strengthened FeCrAl alloys

Journal of Nuclear Materials, 533, 152105.

W-ZrC composites prepared by reactive melt infiltration of Zr2Cu alloy into binder jet 3D printed WC preforms

International Journal of Refractory Metals and Hard Materials, 94, 105411.

Compatibility of FeCrAlMo with flowing PbLi at 500°-650 °C

Journal of Nuclear Materials, 528, 151847.

Development of nickel-incorporated MCM-41–carbon composites and their application in nitrophenol reduction

Journal of Materials Chemistry A, 7(16), 9618–9628.

Effect of impurities on supercritical CO2 compatibility

3rd European supercritical CO2 Conference. Presented at the 3rd European supercritical CO2 Conference, Paris, France.

Enhanced Catalyst Durability for Bio-Based Adipic Acid Production by Atomic Layer Deposition

Joule, 3(9), 2219–2240.

Evaluation of additive electron beam melting of haynes 282 alloy

Materials Science and Engineering: A, 772, 138607.

KBaTeBiO₆: A Lead-Free, Inorganic Double-Perovskite Semiconductor for Photovoltaic Applications

Chemistry of Materials, 31(13), 4769–4778.

Methodologies for Evaluation of Corrosion Protection for Ductile Iron Pipe

Controlling Water Vapor in Gas-Cell Microscopy Experiments

Microscopy and Microanalysis, 24(S1), 286–287.

Development of low-Cr ODS FeCrAl alloys for accident-tolerant fuel cladding

Journal of Nuclear Materials, 501, 59–71.

Evaluation of Carbon Partitioning in New Generation of Quench and Partitioning (Q&P) Steels

Metallurgical and Materials Transactions A, 49(10), 4809–4823.

Exploring radiation induced segregation mechanisms at grain boundaries in equiatomic CoCrFeNiMn high entropy alloy under heavy ion irradiation

Scripta Materialia, 156, 80–84.

In Situ S/TEM Reduction Reaction of Ni-Mo2C Catalyst for Biomass Conversion

Microscopy and Microanalysis, 24(S1), 322–323.

Process Development for Haynes® 282® Using Additive Manufacturing

Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations

Metallurgical and Materials Transactions A, 49(11), 5775–5798.

Residual stress determination of direct metal laser sintered (DMLS) inconel specimens and parts

STEM and APT characterization of scale formation on a La,Hf,Ti-doped NiCrAl model alloy

Micron, 109, 41–52.

Single-step aging treatment for a precipitation-strengthened Ni-based alloy and its influence on high-temperature mechanical behavior

Scripta Materialia, 162, 416–420.

The Effect of CO2 Pressure on Chromia Scale Microstructure at 750°C

JOM, 70(8), 1511–1519.

Characterization of chromia scales formed in supercritical carbon dioxide

Materials at High Temperatures, 35(1-3), 39–49.

Compatibility of an FeCrAl alloy with flowing Pb-Li in a thermal convection loop

Journal of Nuclear Materials, 492, 41–51.

Effect of Al and Cr Content on Air and Steam Oxidation of FeCrAl Alloys and Commercial APMT Alloy

Oxidation of Metals, 87(3-4), 431–441.

Energy dependence of He-ion-induced tungsten nanofuzz formation at non-normal incidence angles

Nuclear Materials and Energy, 12, 366–371.

Fabrication of Oxide Dispersion Strengthened Bond Coats with Low Al2O3 Content

Journal of Thermal Spray Technology, 26(5), 868–879.

Grain Boundary Chemistry and Transport Through Alumina Scales on NiAl Alloys

Oxidation of Metals, 88(3-4), 469–479.

High-temperature behavior of oxide dispersion strengthening CoNiCrAlY

Materials at High Temperatures, 35(1-3), 108–119.

In situ</i> Nanoscale Imaging and Spectroscopy of Energy Storage Materials

Microscopy and Microanalysis, 23(S1), 1964–1965.

In situ</i> S/TEM Reduction Reaction of Calcined Cu/BEA-zeolite Catalyst

Microscopy and Microanalysis, 23(S1), 944–945.

Interfaces in Oxides Formed on NiAlCr Doped with Y, Hf, Ti, and B

Microscopy and Microanalysis, 23(2), 396–403.

Model “Alloy” Specimens for MEMS-Based Closed-Cell Gas-Reactions

Microscopy and Microanalysis, 23(S1), 908–909.

NiAl Oxidation Reaction Processes Studied In Situ Using MEMS-Based Closed-Cell Gas Reaction Transmission Electron Microscopy

Oxidation of Metals, 88(3-4), 495–508.

Ru-Sn/AC for the Aqueous-Phase Reduction of Succinic Acid to 1,4-Butanediol under Continuous Process Conditions

ACS Catalysis, 7(9), 6207–6219.

Steam Oxidation Evaluation of Fe–Cr Alloys for Accident Tolerant Nuclear Fuel Cladding

Oxidation of Metals, 87(3-4), 515–526.

Water Vapor in Closed-Cell <i>In Situ</i> Gas Reactions: Initial Experiments

Microscopy and Microanalysis, 23(S1), 940–941.

Advanced TEM characterization of oxide nanoparticles in ODS Fe–12Cr–5Al alloys

Journal of Materials Science, 51(20), 9190–9206.

Creep and Oxidation Behavior of Modified CF8C-Plus with W, Cu, Ni, and Cr

Metallurgical and Materials Transactions A, 47(4), 1641–1653.

Evaluation of Pb–17Li compatibility of ODS Fe-12Cr-5Al alloys

Journal of Nuclear Materials, 479, 357–364.

Evaluation of an Al-Ce alloy for laser additive manufacturing

Acta Materialia, 126, 507–519.

Feasibility of in situ controlled heat treatment (ISHT) of Inconel 718 during electron beam melting additive manufacturing

Additive Manufacturing, 13, 156–165.

Flux threshold measurements of He-ion beam induced nanofuzz formation on hot tungsten surfaces

Physica Scripta, T167, 014019.

Helium sequestration at nanoparticle-matrix interfaces in helium + heavy ion irradiated nanostructured ferritic alloys

Journal of Nuclear Materials, 483, 21–34.