@article{hossain_lubna_bradford_2023, title={Multifunctional and Washable Carbon Nanotube-Wrapped Textile Yarns for Wearable E-Textiles}, ISSN={["1944-8252"]}, DOI={10.1021/acsami.2c19826}, abstractNote={Carbon nanotube (CNT) yarns are promising for wearable electronic applications due to their excellent electromechanical and thermal properties and structural flexibility. A spinning system was customized to produce CNT-wrapped textile yarns for wearable applications. By adjusting the spinning parameters and core yarn, a highly tailored hybrid CNT yarn could be produced for textile processing, e.g., knitting and weaving. The electrical resistance and mechanical properties of the yarn are influenced by the core yarn. The high flexibility of the yarn enabled state-of-the-art three-dimensional (3D) knitting of the CNT-wrapped yarn for the first time. Using the 3D knitted technology, CNT-wrapped textile yarns were seamlessly integrated into a wrist band and the index finger of a glove. The knitted structure exhibited a large resistance change under strain and precisely recorded the signal under the different movements of the finger and wrist. When the knitted fabric was connected to a power source, rapid heating above skin temperature was observed at a low voltage. This work presents a novel hybrid yarn for the first time, which sustained 30 washing cycles without performance degradation. By changing the core yarn, a highly stretchable and multimodal sensing system could be developed for wearable applications.}, journal={ACS APPLIED MATERIALS & INTERFACES}, author={Hossain, Md Milon and Lubna, Mostakima M. and Bradford, Philip D.}, year={2023}, month={Jan} }
 @article{hossain_li_sennik_jur_bradford_2022, title={Adhesive free, conformable and washable carbon nanotube fabric electrodes for biosensing}, volume={6}, ISSN={["2397-4621"]}, DOI={10.1038/s41528-022-00230-3}, abstractNote={Abstract}, number={1}, journal={NPJ FLEXIBLE ELECTRONICS}, author={Hossain, Md. Milon and Li, Braden M. M. and Sennik, Busra and Jur, Jesse S. S. and Bradford, Philip D. D.}, year={2022}, month={Dec} }
 @article{islam_liman_roy_hossain_repon_al mamun_2022, title={Cotton dyeing performance enhancing mechanism of mangiferin enriched bio-waste by transition metals chelation}, volume={113}, ISSN={["1754-2340"]}, DOI={10.1080/00405000.2021.1892337}, abstractNote={Abstract This study reported a sustainable and facile coloration approach of cotton fabric by exploiting mangiferin enriched mango seed kernel bio-waste. The extract principally contains mangiferin and different polyphenolic chromophores such as hydrolysable tannin, flavonoids (quercetin), betacyanin and saponin which were confirmed by phytochemical screening. The optimum conditions for dyeing were found at 90  with a time interval of 60 min and the overall fixation rate of chromophores was ranging from 56 to 71%. Different transition metals (Fe2+, Cu2+, Al3+, and Sn2+) were utilized to promote the fixation of mangiferin enriched dye (MED) chromophores. The higher absorption mechanisms of MED chromophores have been discussed in terms of molecular orientation (TCI, LOI), and inter and intra-molecular hydrogen bonding configuration (HBI, EH, R). The total amount of anchored chromophores was expressed by the asymmetric factor (AF). The maximum dye-fiber bonding behavior was proposed in Fe2+ encased sample with an improvement of color strength (K/S) from 5.97 to 7.20. Besides, the addition of electrolytes in the dye bath further improved the chromophores' exhaustion (K/S = 8.4). Higher chromophores fixation with metallic cross-linkers and cationic electrolyte endowed diverse colorimetric values (L*, a*, b*, c*, h, BI, ΔE) for the dyed samples and ensured excellent colorfastness properties in comparison to other natural dyeing processes.}, number={4}, journal={JOURNAL OF THE TEXTILE INSTITUTE}, author={Islam, M. Tauhidul and Liman, Md Luthfar Rahman and Roy, Manindra Nath and Hossain, Md. Milon and Repon, Md. Reazuddin and Al Mamun, Md. Abdullah}, year={2022}, month={Mar}, pages={567–579} }
 @article{shkir_chandekar_hossain_palanivel_ahmad_ashraf_somaily_algarni_alfaify_2022, title={Enhanced dielectric and electrical properties of PbS nanostructures facilely synthesized by low-cost chemical route: An effect of Ce doping concentrations}, volume={278}, ISSN={["1879-3312"]}, DOI={10.1016/j.matchemphys.2021.125626}, abstractNote={Herein the authors are presenting the facile preparation and characterization of Ce doped PbS nanostructures ([email protected] NSs). Phase analysis was studied by X-ray diffraction which approves major cubic phase of PbS along with CeClS phase peaks. Vibrational analysis also confirm major cubic phase of PbS of the final products. EDX/SEM e-mapping showed the Ce doping with homogeneity in PbS. SEM analysis gives a clear morphology of nanoparticles along with some nanoflakes in respective pure and doped PbS. Optical study reveals the variation in energy gap values of PbS with Ce content from 1.45 eV (pure PbS) to 1.084 eV (2.5 wt% [email protected]) and also there is another energy gap varies between 3 and 3.5 eV in pure and doped PbS NSs. The capacitance and impedance were studied over wide frequency region. The dielectric constant of PbS has been improved from 17.5 to 24.5 with Ce content addition. The ac electrical conductivity was improved with Ce content addition in PbS. The improvement in dc-electrical conductivity was also noticed with Ce addition in PbS. The improved dielectric and electrical characteristics makes the synthesized [email protected] NSs useful in optoelectronic.}, journal={MATERIALS CHEMISTRY AND PHYSICS}, author={Shkir, Mohd and Chandekar, Kamlesh V and Hossain, Md Milon and Palanivel, Baskaran and Ahmad, Nafis and Ashraf, I. M. and Somaily, H. H. and Algarni, H. and AlFaify, S.}, year={2022}, month={Feb} }
 @article{shkir_hakami_hossain_awwad_khan_2022, title={Excellent photo-detection properties of cerium doped ZnO device fabricated by spray pyrolysis technique}, volume={140}, ISSN={["1879-0259"]}, DOI={10.1016/j.inoche.2022.109439}, abstractNote={Recently, n-type ZnO is identified as a promising candidate for ultraviolet (UV) photodetectors (PDs) due to their suitable optoelectronics properties. Hence, in this work we fabricated the ZnO and Ce doped ZnO (ZnO:Ce) based UV Photo detectors by spray pyrolysis technique. Prior to the photodetection studies, the wurtzite structure of ZnO:Ce samples is confirmed by X-ray diffraction analysis. The 2D and 3D topography and morphology of the films are probed by AFM study. Further, the elemental compositions are confirmed with EDX spectrum. The optical studies such as UV–visible absorbance and photoluminescence emission spectra are respectively recorded to find the bandgap and the defect states in ZnO:Ce. Finally, the UV photodetection properties of fabricated thin film devices are studied under the irradiation of 365 nm laser. Photo detector sensing parameters such as responsivity, detectivity and the external quantum efficiency of the ZnO:Ce(2.0%) sample exhibited maximum values of 0.27 AW−1, 63% and 2.18 × 1010 Jones and it proved to be a potential sensor application as UV Photodetector.}, journal={INORGANIC CHEMISTRY COMMUNICATIONS}, author={Shkir, Mohd and Hakami, Jabir and Hossain, Md Milon and Awwad, Nasser S. and Khan, Aslam}, year={2022}, month={Jun} }
 @misc{mahmud_hasan_bain_rahman_rhaman_hossain_ordu_2022, title={Multilayer MXene Heterostructures and Nanohybrids for Multifunctional Applications: A Review}, volume={4}, ISSN={["2639-4979"]}, DOI={10.1021/acsmaterialslett.2c00175}, abstractNote={: MXenes (transition metal carbides and nitrides) have experienced exponential growth over the last two decades, thanks to their excellent physical, chemical, and mechanical properties. Intriguing properties like high conductivity, wear, and corrosion resistance while maintaining fl exibility are the strong motivation behind the exploration of MXenes. Moreover, the large surface area and unique layered structure enhance the functionality of multilayer-MXene heterostructures and hybrids. This paper reviews the synthesis chemistry, structure properties of multilayer MXenes, and their multifunctional applications. MXene synthesis under di ff erent conditions, their hybrids and composites, intercalation, and structural geometries are discussed. The electrical, mechanical, optical, and magnetic properties of MXenes are brie fl y presented. Recent progress and development in MXene-based heterostructures and nanohybrids for supercapacitors, batteries, environmental and water treatment, antibacterial and tissue engineering, and electromagnetic absorption and shielding are systematically discussed. Finally, research challenges and a perspective in this speci fi ed area are addressed for potential developments.}, number={6}, journal={ACS MATERIALS LETTERS}, author={Mahmud, Sharif Tasnim and Hasan, Md Mehdi and Bain, Sudipta and Rahman, Sheikh Tamjidur and Rhaman, Mukitur and Hossain, Md Milon and Ordu, Mustafa}, year={2022}, month={Jun}, pages={1174–1206} }
 @article{marzana_morsada_faruk_ahmed_khan_jalil_hossain_rahman_2022, title={Nanostructured Carbons: towards Soft-Bioelectronics, Biosensing and Theraputic Applications}, ISSN={["1528-0691"]}, DOI={10.1002/tcr.202100319}, abstractNote={Abstract}, journal={CHEMICAL RECORD}, author={Marzana, Maliha and Morsada, Zinnat and Faruk, Md Omar and Ahmed, Abbas and Khan, Md Manirul Alam and Jalil, Mohammad Abdul and Hossain, Md Milon and Rahman, Mohammed Muzibur}, year={2022}, month={Feb} }
 @misc{ahmed_bain_prottoy_morsada_islam_hossain_shkir_2022, title={Silk-Templated Nanomaterial Interfaces for Wearables and Bioelectronics: Advances and Prospects}, volume={4}, ISSN={["2639-4979"]}, DOI={10.1021/acsmaterialslett.1c00618}, abstractNote={Soft, wearable, stretchable, and flexible devices are intriguing in electronic fields, as they offer light weight, user-friendliness, and high-throughput performance. Electronic devices derived from bioresources spurred augmented benefits typically in terms of sustainability, biocompatibility, biointegration, and their device utilization in copious electronic fields such as biomedical healthcare, sensing, energy, intelligent clothing, and so forth. Significantly, the natural biopolymer silk has extensively been explored to design wearable electronic devices because of its excellent attributes and active functional sites present in their structures. Consequently, silk is being integrated with various carbon-based fillers, metallic interfaces, conducting polymers, etc. This review provides a comprehensive overview of silk integrated nanomaterial structures for wearable and bioelectronics applications. The outstanding structural features of silk materials have been discussed, summarizing their intrinsic properties and performance matrices for integration with various nanomaterials. Several silk/nanomaterial-enabled bioelectronics applications are presented, and in the end, future opportunities are also envisioned.}, number={1}, journal={ACS MATERIALS LETTERS}, author={Ahmed, Abbas and Bain, Sudipta and Prottoy, Zawad Hasan and Morsada, Zinnat and Islam, M. Tauhidul and Hossain, Md Milon and Shkir, Mohd.}, year={2022}, month={Jan}, pages={68–86} }
 @article{ahmed_sharma_adak_hossain_lachance_mukhopadhyay_sun_2022, title={Two-dimensional MXenes: New frontier of wearable and flexible electronics}, ISSN={["2567-3165"]}, DOI={10.1002/inf2.12295}, abstractNote={Abstract}, journal={INFOMAT}, author={Ahmed, Abbas and Sharma, Sudeep and Adak, Bapan and Hossain, Md Milon and LaChance, Anna Marie and Mukhopadhyay, Samrat and Sun, Luyi}, year={2022}, month={Feb} }
 @article{liman_islam_repon_hossain_sarker_2021, title={Comparative dyeing behavior and UV protective characteristics of cotton fabric treated with polyphenols enriched banana and watermelon biowaste}, volume={21}, ISSN={["2352-5541"]}, DOI={10.1016/j.scp.2021.100417}, abstractNote={This study reported a facile structural modification of cellulosic fabric (cotton) by applying two different polyphenol enriched extracts derived from the banana floral stem (BFS) and watermelon rind (WR) for imparting UV protective functionality. The dye extracts are comprised of various UV protective natural chromophores (UVPNCs) such as tannin, flavonoids, anthraquinone, anthocyanin, betacyanine. The concentrations and absorbance intensities of UVPNCs were confirmed by phytochemical screening and UV spectroscopy. Better absorption behavior for BFS and WR chromophores into cellulose was found at 80°C and 60°C temperature with a constant runtime of 60 minutes. At this conditions, the fixation rate of BFS and WR was 53-63% and 25–85%, respectively. Furthermore, cellulose substrates were chelated with different types of metals (Al3+, Sn2+, Fe2+, and Cu2+) to promote the chromophore fixation. The effect of metal chelation with cellulose chain was estimated in terms of crystallinity indices, hydrogen bonding configurations and asymmetric factor, which were correlated with the enhanced UVPNCs fixation. The higher amount of BFS and WR chromophores were absorbed for Fe2+ and Cu2+, demonstrating ~61% and ~ 26% improvement in color strength (K/S), respectively. The formation of UVPNCs-metal-cellulose complex, decreased the UV transmission rate of the BFS and WR dyed fabrics. Interestingly, BFS dyed substrate exhibited higher (UPF = 50+) UV shielding ability compared to WR dyed substrate (UPF = 4.20) due to higher UVPNCs absorbance intensities and bonding capacity of BFS extract. Finally, the durability of functionality of BFS and WR dyed substrates was confirmed in terms of various colorfastness.}, journal={SUSTAINABLE CHEMISTRY AND PHARMACY}, author={Liman, Md Luthfar Rahman and Islam, M. Tauhidul and Repon, Md Reazuddin and Hossain, Md Milon and Sarker, Priti}, year={2021}, month={Jun} }
 @article{liman_islam_hossain_sarker_repon_2021, title={Environmentally benign dyeing mechanism of knitted cotton fabric with condensed and hydrolyzable tannin derivatives enriched bio-waste extracts}, volume={23}, ISSN={["2352-1864"]}, DOI={10.1016/j.eti.2021.101621}, abstractNote={This study reported a sustainable comparative cotton dyeing mechanism of condensed and hydrolyzable tannin enriched extracts by exploiting watermelon rind (WR) and mango seed kernel (MSK) bio-waste. Both crude dye extracts possess various coloring chromophores such as flavonoid, betacyanin, quercetin, β-carotene together with condensed and hydrolyzable tannin at a different level of concentrations, which were confirmed by several phytochemical screenings, thin layer chromatography, and UV spectroscopy. At optimized reaction condition, the resulted fixation rates of various WRCs (at 60 °C for 60 min) and MSKCs (at 90 °C for 60 min) were found as 25%–75% and 55%–71%, respectively. MSKCs have higher absorbance intensity and proactive anchoring sites than those of WRCs, resulting in three times higher color strength (K/S). For promoting the dye fixation, cotton fabric samples were chelated with different types of metallic salts (Fe2＋, Al3＋, Sn2+, and Cu2+) and 65% and 45% enhanced color strength was found for WRCs (K/S increased from 0.95 to 1.57) and MSKCs (K/S increased from 2.75 to 3.98), respectively. The effects of metal chelation with cellulose chain were estimated in terms of several crystallinity indices, hydrogen bonding configurations, and asymmetric factor and elaborately correlated with the improved dye fixation. In addition, the electrolyte was also added to the dye bath for further improvement of dye exhaustion, thereby granted 12% and 6% higher color depth for WR (K/S increased from 1.57 to 1.76) and MSK dyed fabric (K/S increased from 3.98 to 4.23). Finally, distinguishing colorimetric appearances and excellent colorfastness properties were ensured for different tannin classes.}, journal={ENVIRONMENTAL TECHNOLOGY & INNOVATION}, author={Liman, Md Luthfar Rahman and Islam, M. Tauhidul and Hossain, Md Milon and Sarker, Priti and Repon, Md Reazuddin}, year={2021}, month={Aug} }
 @article{islam_repon_liman_hossain_al mamun_2021, title={Functional modification of cellulose by chitosan and gamma radiation for higher grafting of UV protective natural chromophores}, volume={183}, ISSN={["1879-0895"]}, DOI={10.1016/j.radphyschem.2021.109426}, abstractNote={This study demonstrated a green functionalization process of a cellulose substrate by combining the chitosan treatment and gamma radiation. To impart the UV protection characteristics in the cellulosic structure, natural chromophores derived from Banana floral stem (BFS) was grafted in the functionalized cellulose surface. Phytochemical screening was performed to confirm the types of UV protective natural chromophores (UVPNCs) presented in BFS. The result exhibited the presence of condensed tannin, flavonoids, anthocyanin, betacyanin, and anthraquinone as the major UVPNC components in BFS. The optimum conditions for maximum sorption of UVPNCs into the functionalized cellulose matrix were recorded at 80°C for 60 min. The cationic biopolymer chitosan (2 g/L), different gamma absorbs doses (2, 4, and 6 kGy), and combined chitosan and gamma treatment into cellulose resulted around 15–23%, 44%, and 41–64% improved absorption of UVPNCs, respectively, as demonstrated by the change in color strength (K/S) compared to unmodified cellulose matrix. The concurrent treatments greatly improved the total crystallinity index (TCI), hydrogen bond intensity (HBI), hydrogen bonding energy (EH), hydrogen bonding distance (R) and asymmetric factor (AF) from 1.358 to 1.363, 0.971 to 0.988, 27.15 kJ–27.40 kJ (at 3274 cm−1), 2.766 Å to 2.764 Å (at 3274 cm−1) and 0.47 to 0.10, respectively. For gamma treatment, 6 kGy irradiation dose provided the best result for improved molecular orientation of cellulose and in combination of chitosan the substrate attained a maximum K/S of 1.98 after UVPNCs grafting. It was found that the UV protection factor (UPF) rating has a linear relationship with the UVPNCs absorption (K/S) and a maximum four-fold increase in UPF (165–506) was evident. The excellent bonding durability of the UVPNCs grafted samples was further ensured in terms of several colorfastness properties. This sustainable functionalization of cellulose with high UPF offers a great promise for applications in health care and photodegradation protection.}, journal={RADIATION PHYSICS AND CHEMISTRY}, author={Islam, M. Tauhidul and Repon, Md Reazuddin and Liman, Md Luthfar Rahman and Hossain, Md Milon and Al Mamun, Md Abdullah}, year={2021}, month={Jun} }
 @article{faruk_ahmed_jalil_islam_shamim_adak_hossain_mukhopadhyay_2021, title={Functional textiles and composite based wearable thermal devices for Joule heating: progress and perspectives}, volume={23}, ISSN={["2352-9407"]}, DOI={10.1016/j.apmt.2021.101025}, abstractNote={Balancing personal thermal comfort is crucial through controlled heating for thermal management and energy saving. The traditional thermo-regulation systems consume a vast amount of energy to maintain thermal comfort. Thus, advanced materials and strategies have been devised to design wearable devices that minimize energy consumption as well as enhance thermal comfort through heating at an individual level. This review has critically discussed the recent advancements in wearable heating devices, focusing on strategies that have been used for developing advanced textiles and composite structures to regulate heat transfer between the human body and environment for personal heating. The review starts with a discussion on the fundamentals of thermal comfort and thermal management that are prerequisites for advanced electronic heating devices. Subsequently, the approaches for incorporating active and passive heating devices into the traditional textiles utilizing their intrinsic strength, flexibility, and conformability have been presented. The next section focused on the materials used for the fabrication of heating devices including, 1D materials (Carbon nanotube) and 2D materials (Graphene, MXene), metallic nanomaterials, and conducting polymers. Finally, the concept for the design and development of advanced thermoregulation textiles and composites for next-generation personal thermal management (PTM) devices have been presented. The concluding section highlighted the research gap and domains where further research endeavors can be directed.}, journal={APPLIED MATERIALS TODAY}, author={Faruk, Md Omar and Ahmed, Abbas and Jalil, Mohammad Abdul and Islam, M. Tauhidul and Shamim, Al Mojnun and Adak, Bapan and Hossain, Md Milon and Mukhopadhyay, Samrat}, year={2021}, month={Jun} }
 @misc{biswas_islam_nandy_hossain_2021, title={Graphene Quantum Dots (GQDs) for Bioimaging and Drug Delivery Applications: A Review}, volume={3}, ISSN={["2639-4979"]}, url={https://doi.org/10.1021/acsmaterialslett.0c00550}, DOI={10.1021/acsmaterialslett.0c00550}, abstractNote={Quantum dots (QDs) exhibit unique physicochemical and optical properties that are suitable for photovoltaic cells, light-emitting diodes, and optoelectronic devices; however, unlike selenium and tellurium/metal-sulfide-based QDs, graphene quantum dots (GQDs) are comparatively less toxic and biocompatible, making them promising candidates for biological applications such as bioimaging, drug delivery agents, therapeutics, and theranostics. Various synthesis techniques such as top-down and bottom-up methods along with novel green synthesis methods for the preparation of pure and doped GQDs are thoroughly discussed in this study. Physicochemical, optical, and biological properties such as size- and chemical-composition-dependent fluorescence, therapeutics, disease diagnostics, biocompatibility, and cellular toxicity are extensively studied and summarized. Finally, the prospects and potential directions of GQDs in drug delivery and bioimaging systems are discussed in regards to challenges such as the synthesis, biocompatibility, and cellular toxicity.}, number={6}, journal={ACS MATERIALS LETTERS}, publisher={American Chemical Society (ACS)}, author={Biswas, Manik Chandra and Islam, Md Tariqul and Nandy, Pranab Kumar and Hossain, Md Milon}, year={2021}, month={Jun}, pages={889–911} }
 @article{faruk_ahmed_adak_marzana_hossain_mukhopadhyay_2021, title={High performance 2D MXene based conducting polymer hybrids: synthesis to emerging applications}, ISSN={["2050-7534"]}, DOI={10.1039/d1tc02240g}, abstractNote={This review highlights the recent advances in MXene-conducting polymer hybrids for wearable electronics (e.g., energy storage, pressure sensing, and EMI shielding, etc.). Furthermore, several future research trends have also been envisioned.}, journal={JOURNAL OF MATERIALS CHEMISTRY C}, author={Faruk, Md. Omar and Ahmed, Abbas and Adak, Bapan and Marzana, Maliha and Hossain, Md. Milon and Mukhopadhyay, Samrat}, year={2021}, month={Aug} }
 @article{liman_islam_hossain_2021, title={Mapping the Progress in Flexible Electrodes for Wearable Electronic Textiles: Materials, Durability, and Applications}, ISSN={["2199-160X"]}, DOI={10.1002/aelm.202100578}, abstractNote={Abstract}, journal={ADVANCED ELECTRONIC MATERIALS}, author={Liman, Md Luthfar Rahman and Islam, M. Tauhidul and Hossain, Md Milon}, year={2021}, month={Sep} }
 @article{hasan_hossain_2021, title={Nanomaterials-patterned flexible electrodes for wearable health monitoring: a review}, ISSN={["1573-4803"]}, DOI={10.1007/s10853-021-06248-8}, abstractNote={Electrodes fabricated on a flexible substrate are a revolutionary development in wearable health monitoring due to their lightweight, breathability, comfort, and flexibility to conform to the curvilinear body shape. Different metallic thin-film and plastic-based substrates lack comfort for long-term monitoring applications. However, the insulating nature of different polymer, fiber, and textile substrates requires the deposition of conductive materials to render interactive functionality to substrates. Besides, the high porosity and flexibility of fiber and textile substrates pose a great challenge for the homogenous deposition of active materials. Printing is an excellent process to produce a flexible conductive textile electrode for wearable health monitoring applications due to its low cost and scalability. This article critically reviews the current state of the art of different textile architectures as a substrate for the deposition of conductive nanomaterials. Furthermore, recent progress in various printing processes of nanomaterials, challenges of printing nanomaterials on textiles, and their health monitoring applications are described systematically.}, journal={JOURNAL OF MATERIALS SCIENCE}, author={Hasan, Md Mehdi and Hossain, Md Milon}, year={2021}, month={Jun} }
 @article{islam_repon_liman_hossain_al mamun_2021, title={Plant tannin and chitosan-templated cellulose for improved absorption of UV protective natural chromophores}, volume={21}, ISSN={["2352-5541"]}, DOI={10.1016/j.scp.2021.100452}, abstractNote={This study reported a facile and sustainable modification of cellulose by plant tannins and chitosan polymer for higher impregnation of UV protective natural chromophores (UVPNCs) derived from the banana floral stem (BFS). The phytochemical screening demonstrated that BFS extracts have different UVPNCs including condensed tannin, flavonoids, anthocyanin, betacyanin and anthraquinone. The optimized impregnation temperature and time for UVPNCs entrapping were found at 80°C with a time interval of 60 min and the overall inherent fixation rate of UVPNCs was ranging from 53 to 63%. The cellulose substrate templated with plant tannins (extracted from Terminalia chebula and Phyllanthus emblica) and chitosan improved the UVPNCs absorption amount almost 2 and 1.8 folds, respectively, which was expressed in terms of color strength (K/S). Interestingly, the UVPNCs entrapping ability of bio-crosslinked cellulose was also higher than typical metallic salts treated cellulose. The higher absorption mechanism of UVPNCs for tannins (-OH and –COOH) and chitosan (-NH2) templating have been discussed in terms of molecular orientation (TCI, LOI), inter and intra-molecular hydrogen bonding configuration (HBI, EH, R), and the total amount of anchored-UVPNCs which was expressed by the asymmetric factor (AF). The UV shielding property of the UVPNCs impregnated modified cellulose was compared and a maximum of two folds higher UPF value was found in bio-templated cellulose substrate (UPF range = 223 to 459) than metal treated cellulose substrates (UPF range = 163 to 175). Furthermore, the functional durability of UVPNCs impregnated substrates was evaluated in terms of several colorfastness and found very good to excellent grading.}, journal={SUSTAINABLE CHEMISTRY AND PHARMACY}, author={Islam, M. Tauhidul and Repon, Md Reazuddin and Liman, Md Luthfar Rahman and Hossain, Md Milon and Al Mamun, Md Abdullah}, year={2021}, month={Jun} }
 @article{morsada_hossain_islam_mobin_saha_2021, title={Recent progress in biodegradable and bioresorbable materials: From passive implants to active electronics}, volume={25}, ISSN={["2352-9407"]}, DOI={10.1016/j.apmt.2021.101257}, abstractNote={Biodegradable and Bioresorbable materials, either for passive implants or wearable and active implantable devices, added a new dimension to healthcare research due to their low cost, convenience, continuous monitoring and physical augmentation. Advanced material chemistry and modern fabrication techniques have developed fully degradable implants that enable controlled degradation kinetic to ensure operational support for repairing and restructuring the surrounding tissue of the defected organ. Besides, integrated bioelectronics coupled with a wireless power system can continuously monitor and record physiological signals and conditions. This review comparatively evaluates physical and mechanical properties, degradation behavior, biocompatibility and convenient fabrication of different biodegradable and bioresorbable materials used for structural supports (substrate, encapsulation) or active device components (conductor, semiconductor, dielectric). Consecutively, material integration and device architecture of biodegradable active electronics including electronic skin, different physical and chemical sensors, self-powered and self-healable sensors have been illustrated, estimating the in vivo and in vitro device performance. Finally, some short-term and long-term challenges are pointed out to overcome the current challenges and speed up future research to commercialize the enormous expansion of the biomedical field.}, journal={APPLIED MATERIALS TODAY}, author={Morsada, Zinnat and Hossain, Md Milon and Islam, M. Tauhidul and Mobin, Md. Ahsanul and Saha, Shumit}, year={2021}, month={Dec} }
 @misc{hasan_hossain_chowdhury_2021, title={Two-dimensional MXene-based flexible nanostructures for functional nanodevices: a review}, volume={9}, ISSN={["2050-7496"]}, DOI={10.1039/d0ta11103a}, abstractNote={MXene contain over 30 members with different compositions and endow nanostructures with EMI shielding capability, high sensitivity to different stimuli, superior electrothermal property, and can be utilized for energy harvesting and storage.}, number={6}, journal={JOURNAL OF MATERIALS CHEMISTRY A}, author={Hasan, Md. Mehdi and Hossain, Md. Milon and Chowdhury, Hussain Kawsar}, year={2021}, month={Feb}, pages={3231–3269} }
 @article{ahmed_jalil_hossain_moniruzzaman_adak_islam_parvez_mukhopadhyay_2020, title={A PEDOT:PSS and graphene-clad smart textile-based wearable electronic Joule heater with high thermal stability}, volume={8}, ISSN={["2050-7534"]}, DOI={10.1039/d0tc03368e}, abstractNote={The paper highlights a stretchable, wash-durable and wearable smart textile-based Joule heater with high thermal stability.}, number={45}, journal={JOURNAL OF MATERIALS CHEMISTRY C}, author={Ahmed, Abbas and Jalil, Mohammad Abdul and Hossain, Md. Milon and Moniruzzaman, Md. and Adak, Bapan and Islam, M. Tauhidul and Parvez, Md. Shohan and Mukhopadhyay, Samrat}, year={2020}, month={Dec}, pages={16204–16215} }
 @article{liman_islam_hossain_sarker_dabnath_2020, title={Coloration of cotton fabric using watermelon extract: mechanism of dye-fiber bonding and chromophore absorption}, ISBN={1754-2340}, DOI={10.1080/00405000.2020.1738036}, abstractNote={Abstract Different approaches have been taken to develop a greener and sustainable cotton coloration process to reduce carbon footprint. Natural compound as a colorant is an excellent alternative to the harsh chemical-based reactive cotton coloration process. However, natural coloration requires improvement in colorimetric properties and a better understanding of the colorant absorption mechanism. Here, we report a process for cotton coloration using bio-friendly natural colorant extracted from watermelon rind. The optical and colorimetric properties of watermelon rind saps (WRS) and WRS dyed cotton fabrics, dye-fiber bonding, chromophores absorption and color-fastness were studied. The experiment showed that the absorption of chromophores into the fabric mainly depends on their molecular weight, the position of the anchoring group and thermal stability. Chromophore adsorptions ranged from 55.4 to 81.7% resulting in excellent dye-fiber chemical potential. Coloration temperature and mordant significantly affect the colorimetric properties of cotton fabric as found in this study. All the dyed cotton samples showed good color-fastness to washing, water, rubbing, and perspiration. Furthermore, cotton dyed with WRS had better UV-protection factor (UPF) than that of the mosty used chemical-intensive reactive dyed sample. Finally, the ecological and economic aspects of WRS dyeing were also compared with commercial reactive dyes.}, journal={JOURNAL OF THE TEXTILE INSTITUTE}, author={Liman, Md Luthfar Rahman and Islam, M. Tauhidul and Hossain, Md Milon and Sarker, Priti and Dabnath, Sreedham}, year={2020} }
 @misc{ahmed_hossain_adak_mukhopadhyay_2020, title={Recent Advances in 2D MXene Integrated Smart-Textile Interfaces for Multifunctional Applications}, volume={32}, ISSN={["1520-5002"]}, DOI={10.1021/acs.chemmater.0c03392}, abstractNote={Coupled with the advances in the Internet of Things (IoT), virtual reality, and soft robotics, wearable smart textiles have emerged as a unique platform for next-generation electronics. Nanofabrica...}, number={24}, journal={CHEMISTRY OF MATERIALS}, author={Ahmed, Abbas and Hossain, Md Milon and Adak, Bapan and Mukhopadhyay, Samrat}, year={2020}, month={Dec}, pages={10296–10320} }
 @article{liman_islam_hossain_sarker_2020, title={Sustainable Dyeing Mechanism of Polyester with Natural Dye Extracted from Watermelon and Their UV Protective Characteristics}, volume={21}, ISSN={["1875-0052"]}, DOI={10.1007/s12221-020-1135-7}, number={10}, journal={FIBERS AND POLYMERS}, author={Liman, Md Luthfar Rahman and Islam, M. Tauhidul and Hossain, Md. Milon and Sarker, Priti}, year={2020}, month={Oct}, pages={2301–2313} }