Martin Thuo

Beyond Hume-Rothery Rules

Martin, A., & Thuo, M. (2023, August 18). ACCOUNTS OF MATERIALS RESEARCH, Vol. 8.

Spatially Directed Pyrolysis via Thermally Morphing Surface Adducts

Du, C., Gregory, P., Jamadgni, D. U., Pauls, A. M., Chang, J. J., Dorn, R. W., … Thuo, M. (2023, August 9). ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, Vol. 8.

Effect of Surface Nanostructures and Speciation on Undercooling for Low-Temperature Solder Alloys

ACS Applied Nano Materials, 5(3), 3325–3332.

Role of Nanoscale Roughness and Polarity in Odd–Even Effect of Self‐Assembled Monolayers

Angewandte Chemie International Edition.

Role of Nanoscale Roughness and Polarity in Odd–Even Effect of Self‐Assembled Monolayers

Angewandte Chemie.

Solid-State Nuclear Magnetic Resonance Spectroscopy-Assisted Structure Determination of Coordination Polymers

Chemistry of Materials.

Substrate Roughness and Tilt Angle Dependence of Sum-Frequency Generation Odd–Even Effects in Self-Assembled Monolayers

The Journal of Physical Chemistry C, 4.

Biobased superhydrophobic coating enabled by nanoparticle assembly

Nanoscale Advances, 3(14), 4037–4047.

Cover Picture: Stabilization of Undercooled Metals via Passivating Oxide Layers (Angew. Chem. Int. Ed. 11/2021)

Angewandte Chemie International Edition.

Frontispiece: Tunable Hydrophobicity via Dimensionally Confined Polymerization of Organometallic Adducts

Angewandte Chemie International Edition, 60(25).

Frontispiz: Tunable Hydrophobicity via Dimensionally Confined Polymerization of Organometallic Adducts

Angewandte Chemie, 133(25).

Introduction: biopolymers and biocomposites

In S. Madbouly & C. Zhang (Eds.), Biopolymers and Composites (pp. 1–26).

Molecular Conformation in Charge Tunneling across Large-Area Junctions

Journal of the American Chemical Society, 8.

NMR-assisted structure determination of coordination polymers

Acta Crystallographica Section A Foundations and Advances, 77, C469.

Passivation-driven speciation, dealloying and purification

Materials Horizons.

Stabilization of Undercooled Metals via Passivating Oxide Layers

Angewandte Chemie International Edition, 60(11), 5928–5935.

Stabilization of Undercooled Metals via Passivating Oxide Layers

Angewandte Chemie, 133(11), 5993–6000.

The Endless and Turbulent Frontier of Academic Entrepreneurship

ACS Nano.

Titelbild: Stabilization of Undercooled Metals via Passivating Oxide Layers (Angew. Chem. 11/2021)

Angewandte Chemie, 133(11), 5633–5633.

Tunable Hydrophobicity via Dimensionally Confined Polymerization of Organometallic Adducts

Angewandte Chemie, 133(25), 14048–14055.

Tunable Hydrophobicity via Dimensionally Confined Polymerization of Organometallic Adducts

Angewandte Chemie International Edition, 60(25), 13929–13936.

Chameleon Metals: Autonomous Nano‐Texturing and Composition Inversion on Liquid Metals Surfaces

Angewandte Chemie, 132(1), 360–365.

Complexity and Opportunities in Liquid Metal Surface Oxides

Chemistry of Materials, 32(21), 9045–9055.

Cover Picture: Chameleon Metals: Autonomous Nano‐Texturing and Composition Inversion on Liquid Metals Surfaces (Angew. Chem. Int. Ed. 1/2020)

Angewandte Chemie International Edition, 59(1), 1–1.

Frontispiece: Heat‐Free Biomimetic Metal Molding on Soft Substrates

Angewandte Chemie International Edition.

Heat‐Free Biomimetic Metal Molding on Soft Substrates

Angewandte Chemie, 7.

Heat‐Free Biomimetic Metal Molding on Soft Substrates

Angewandte Chemie International Edition, 8.

Polydispersity‐Driven Printing of Conformal Solid Metal Traces on Non‐Adhering Biological Surfaces

Advanced Materials Interfaces, 9, 2001294.

Synthesis of Interface-Driven Tunable Bandgap Metal Oxides

ACS Materials Letters, 2(9), 1211–1217.

Titelbild: Chameleon Metals: Autonomous Nano‐Texturing and Composition Inversion on Liquid Metals Surfaces (Angew. Chem. 1/2020)

Angewandte Chemie, 132(1), 1–1.

Ambient synthesis of nanomaterials by in situ heterogeneous metal/ligand reactions

Nanoscale.

Chameleon Metals: Autonomous Nano‐Texturing and Composition Inversion on Liquid Metals Surfaces

Angewandte Chemie International Edition, 59(1), 352–357.

Chemical Potential Driven Stabilization of Undercooled Particles

10th International Conference on Materials for Advanced Technologies (ICMAT 2019). Presented at the 10th International Conference on Materials for Advanced Technologies (ICMAT 2019), Singapore.

Determining Surface Energy of Porous Substrates by Spray Ionization

Langmuir, 35(43), 13853–13859.

Effect of surface morphologies and chemistry of paper on deposited collagen

Applied Surface Science, 484, 461–469.

Effect ofinterfacial stress on surface reconstruction in metal thin films

10th International Conference on Materials for Advanced Technologies (ICMAT 2019). Presented at the 10th International Conference on Materials for Advanced Technologies (ICMAT 2019), Singapore.

Frugal Innovations through surface and Interface engineering in Paper: Controlling Collagen organization

Tappi-Papercon Conference 2019.

Functional Materials through Surface and Interfaces

3M techforum.

Heat‐Free Fabrication of Metallic Interconnects for Flexible/Wearable Devices

Advanced Functional Materials, 7, 1903687.

Micro Characterization of z-resistance of papers

Tappi-Papercon Conference 2019.

Rapid Prototyping of Reconfigurable Microfluidic Channels in Undercooled Metal Particle-Elastomer Composites

Industrial & Engineering Chemistry Research, 58(10), 4137–4142.

Undercooled Liquid Metal Particle Inks for Flexible Conductive Traces Using Direct Writing

10th International Conference on Materials for Advanced Technologies (ICMAT 2019). Presented at the 10th International Conference on Materials for Advanced Technologies (ICMAT 2019), Singapore.

Understanding Molecular Conformation using Charge Tunneling Characteristics of Self-Assembled Monolayer (SAMs) Junctions

10th International Conference on Materials for Advanced Technologies (ICMAT 2019). Presented at the 10th International Conference on Materials for Advanced Technologies (ICMAT 2019), Singapore.

Virtual Issue: Next-Generation Smart Materials

Macromolecules, 52(17), 6339–6341.

(Invited) Towards a Perfect Junction: Effect of Smoothening Electrodes on Tunneling Behaviors across Large Area Molecular Junctions

ECS Transactions.

(Invited) Towards a Perfect Junction: Effect of Smoothening Electrodes on Tunneling Behaviors across Large Area Molecular Junctions

ECS Meeting Abstracts, MA2018-02(19), 759–759.

Autonomous Thermal-Oxidative Composition Inversion and Texture Tuning of Liquid Metal Surfaces

ACS Nano, 12(5), 4744–4753.

Autonomous thermal-oxidative composition inversion (TOCI) and texture tuning in liquid metal particles

256th ACS National Meeting & Exposition. Presented at the 256th ACS National Meeting & Exposition, Boston, MA, United States.

Conductive Materials Reliability in Flexible Electronics Symposium. Undercooled Liquid Metal Particle Inks for Flexible Conductive Traces Using Direct Writing

Materials Research Society (MRS) Fall Meeting. Presented at the Materials Research Society (MRS) Fall Meeting, Boston, MA.

Dried Blood Spheroids for Dry-State Room Temperature Stabilization of Microliter Blood Samples

Analytical Chemistry, 90(15), 9353–9358.

Elucidating the Role of Molecule–Electrode Interfacial Defects in Charge Tunneling Characteristics of Large-Area Junctions

Journal of the American Chemical Society, 140(38), 12303–12307.

Fabrication of Iron-Cellulose Microstructures through Thermal Degradation and Surface Functionalization

Frontiers in Chemistry, 6, 338.

Functional Materials through Surfaces and Interfaces

MRS Advances, 3(37), 2221–2233.

Infinite coordination polymers as intermediates in synthesis of 2D porous oxide from bulk metal

Gordon Research Conference: Crystal Engineering. Poster presented at the Gordon Research Conference: Crystal Engineering.

Lab-on-paper: Designing paper-based diagnostic devices for translation and automation

256th ACS National Meeting & Exposition. Presented at the 256th ACS National Meeting & Exposition, Boston, MA, United States.

Magnetic Two-Way Valves for Paper-Based Capillary-Driven Microfluidic Devices

ACS Omega, 3(2), 2049–2057.

Mechanically triggered composite stiffness tuning through thermodynamic relaxation (ST3R)

Materials Horizons.

Rapid One-Step Synthesis of Complex-Architecture Block Polymers Using Inductively “Armed-Disarmed” Monomer Pairs

Macromolecular Rapid Communications, 3, 1800026.

Rapid bimechanistic synthesis and self-assembly of block co- polymers using free electron initiators

256th ACS National Meeting & Exposition. Presented at the 256th ACS National Meeting & Exposition, Boston, MA, United States.

Stiffness Tunable (ST3R) Composite by Mechanical Actuation

Materials Research Society (MRS) Fall Meeting. Presented at the Materials Research Society (MRS) Fall Meeting, Boston, MA.

Understanding Keesom Interactions in Monolayer-Based Large-Area Tunneling Junctions

The Journal of Physical Chemistry Letters, 9(17), 5078–5085.

Understanding interface (odd–even) effects in charge tunneling using a polished EGaIn electrode

Physical Chemistry Chemical Physics.

Frugal Innovation in Polymer Engineer Training

8th North America Symposium on Materials Education Symposium. Presented at the 8th North America Symposium on Materials Education Symposium, Cambridge, MA.

Frugal Innovation in Polymer Engineers Training

8th North America Materials Education Symposium. Presented at the 8th North America Materials Education Symposium, Cambridge, MA.

Frugal innovation: Synthesis and applications of undercooled metal particles

Basic Research in Colloids, Surfactants & Nanomaterials, Division of Colloid and Surface Chemistry, ACS national meeting. Presented at the ACS national meeting, San Francisco, CA.

Interfacial stress induced metal thin film surface reorganization

Deposition & Etching of Nanostructures, Division of Colloid and Surface Chemistry, ACS national meeting. Presented at the ACS national meeting, San Francisco, CA.

Magnet-paper composites for low-cost two-way valves and other active structures in -pads

MicroTAS 2017. Presented at the MicroTAS 2017, Savannah, Georgia.

Paper-based microfluidic devices by asymmetric calendaring

Biomicrofluidics, 11(1), 014104.

Properties of Self-Assembled Monolayers Revealed via Inverse Tensiometry

Langmuir, 33(47), 13451–13467.

Quantifying Gauche Defects and Phase Evolution in Self-Assembled Monolayers through Sessile Drops

ACS Omega, 2(5), 2072–2084.

Rapid free-electron initiated selective polymerization at room temperature

General Topics: New Synthesis & Characterization of Polymers, Division of Polymer Chemistry, ACS national meeting. Presented at the ACS national meeting, San Francisco, CA.

Recruiting physisorbed water for green and bio-degradable perfluorinated surface modifications

General Papers/New Concepts in Polymeric Materials, Division of Polymeric Materials Science and Engineering, ACS national meeting. Presented at the ACS national meeting, San Francisco, CA.

Rethinking the Design of Low-Cost Point-of-Care Diagnostic Devices

Micromachines, 8(11), 317.

Revisiting the structure-properties relation in charge transport across large areamolecular tunneling junctions

Multicenter Molecules & Coupled Molecular Assemblies: Synthesis, Characterization & Theory, Division of Physical Chemistry, ACS national meeting. Presented at the ACS national meeting, San Francisco, CA.

Role of Molecular Dipoles in Charge Transport across Large Area Molecular Junctions Delineated Using Isomorphic Self-Assembled Monolayers

The Journal of Physical Chemistry C, 121(43), 23931–23938.

Self-assembled coordination polymer as inter-mediate in synthesis of porous oxide from bulk metal

Chemistry of Materials: Metal Organic Frameworks, Division of Inorganic Chemistry, ACS national meeting. Presented at the ACS national meeting, San Francisco, CA.

Simplicity: Exploiting Wetting in Self-Assembled Monolayers to Understand Charge Transport

9th International Conference on Materials for Advanced Technologies (ICMAT. Presented at the 9th International Conference on Materials for Advanced Technologies (ICMAT), Singapore.

Solvated-electron initiated rapid polymerization at ambient-temperature: a case of monomer solubility

Polymer Chemistry, 8(22), 3475–3484.

Spectroscopic evidence for the origin of odd–even effects in self-assembled monolayers and effects of substrate roughness

Physical Chemistry Chemical Physics, 19(10), 6989–6995.

Statistical Tools to Reveal Effect of Dipole Moments in Charge Transport

9th International Conference on Materials for Advanced Technologies (ICMAT. Presented at the 9th International Conference on Materials for Advanced Technologies (ICMAT), Singapore.

Surface and buried interface layer studies on challenging structures as studied by ARXPS

Surface and Interface Analysis, 49(13), 1309–1315.

The Effect of Smoothening Electrodes on Tunneling Behaviors across Large Area Molecular Junctions

9th International Conference on Materials for Advanced Technologies (ICMAT. Presented at the 9th International Conference on Materials for Advanced Technologies (ICMAT), Singapore.

Application of Ionic Liquids in Pot-in-Pot Reactions

Molecules, 21(3), 272.

Biobased Adhesives and Coatings

American Coating Show. Presented at the American Coating Show, Indianapolis, IN.

Coordination polymerization as a green and low-cost approach for synthesis of oxide structures with tunable porosity

European-Materials Research Society Meeting. Presented at the European-Materials Research Society Meeting.

Effect of Substrate Morphology on the Odd–Even Effect in Hydrophobicity of Self-Assembled Monolayers

Langmuir, 32(40), 10358–10367.

Empirical Evidence for Roughness-Dependent Limit in Observation of Odd–Even Effect in Wetting Properties of Polar Liquids on n-Alkanethiolate Self-Assembled Monolayers

Langmuir, 32(32), 8230–8237.

Fabrication of Namib Beetle Inspired Biomimetic Amphi-phobic Surfaces Using Adsorbed Water as a Monomer

Procedia Engineering, 141, 59–62.

Fabrication of core-shell undercooled particles & their use in manufacturing and joining at ambient conditions

Fabrication of core-shell undercooled particles & their use in manufacturing and joining at ambient conditions. European-Materials Research Society Meeting. Presented at the European-Materials Research Society Meeting.

Introduction to Plant Oils

Bio-Based Plant Oil Polymers and Composites, pp. 1–18.

Mechanical Fracturing of Core-Shell Undercooled Metal Particles for Heat-Free Soldering

Sci. Rep., 6, 21864.

Microfluidic Paper-Based Multiplexing Biosensors for Electrochemical Detection of Metabolic Biomarkers

In C. Lu & S. S. Verbridge (Eds.), Microfluidic Methods for Molecular Biology (pp. 205–218).

Paper-based Microfluidic devices by pen calendaring

SACNAS Conference. Presented at the SACNAS Conference, Long Beach, CA.

Rapid acquisition of wideline MAS solid-state NMR spectra with fast MAS, proton detection, and dipolar HMQC pulse sequences

Physical Chemistry Chemical Physics, 18(36), 25284–25295.

Recruiting physisorbed water in surface polymerization for bio-inspired materials of tunable hydrophobicity

Journal of Materials Chemistry A, 4(38), 14729–14738.

Stereo-Electronic Effects in Tunneling Junctions: Revisiting the Platform

Procedia Engineering, 141, 138–143.

Stereo-electronic effects in charge transport through large-area junctions

251st ACS National Meeting & Exposition. Presented at the 251st ACS National Meeting & Exposition, San Diego, CA, United States,

Substituting Plastic Casings with Hydrophobic (Perfluorosilane treated) paper improves Biodegradability of Low-Cost Diagnostic Devices

Industrial Crops and Products, 94, 294–298.

Surface polymerization of perfluorosilane treatments on paper mitigates HF production upon incineration

RSC Advances, 6(85), 82233–82237.

Visualization of Hyperconjugation and Subsequent Structural Distortions through 3D Printing of Crystal Structures

Letters in Organic Chemistry, 13(4), 272–276.

A simple mechanical annealing to fabricate large area super flat metal surface

1st International Conference on Applied Surface Science. Presented at the 1st International Conference on Applied Surface Science, Shanghai, China.

Biomimetic Amphiphobic Surfaces on Paper

249th American Chemical Society Conference, National Meeting & Exposition. Presented at the 249th American Chemical Society Conference, National Meeting & Exposition, Denver, CO.

Biomimetic Namib beetle inspired omniphobic paper and related technologies

8th African Materials Research Society Meeting. Presented at the 8th African Materials Research Society Meeting, Accra, Ghana.

Chemical and Mechanical Surface Modification for Low-cost bio-analytical devices

American Chemical Society regional meeting. Presented at the American Chemical Society regional meeting, Ithaca, NY USA.

Development of new catalyst-monomer pairs for bio-renewable thermoset production by ROMP

13 Congresso Brasileiro de Polímeros. Presented at the Congresso Brasileiro de Polímeros.

Draw your assay: Fabrication of low-cost paper-based diagnostic and multi-well test zones by drawing on a paper

Talanta, 144, 289–293.

Fabrication of Namib Beetle Inspired Biomimetic Amphi-Phobic Surfaces Using Adsorbed Water as a Monomer

8th International Conference on Materials for Advanced Technologies. Presented at the 8th International Conference on Materials for Advanced Technologies, Singapore.

Limits to the Effect of Substrate Roughness or Smoothness on the Odd–Even Effect in Wetting Properties of n -Alkanethiolate Monolayers

Langmuir, 31(25), 7047–7054.

Limits to the influence of surface roughness on the odd-even effect in wetting properties of self-assembled monolayers

1st International Conference on Applied Surface Science. Poster presented at the 1st International Conference on Applied Surface Science, Shanghai, China.

Melt-and-mold fabrication (MnM-Fab) of reconfigurable low-cost devices for use in resource-limited settings

Talanta.

Nano-mechanical properties of eutectic gallium-indium particles by atomic forcemicroscopy

250th American Chemical Society National Meeting & Exposition. Presented at the 250th American Chemical Society National Meeting & Exposition.

Particles for joining and manufacturing of metals at room temperature

2nd Midwest Postdoctoral Symposium.

Pot-in-pot reactions: a simple and green approach to efficient organic synthesis

Rsc Advances, 5(1), 597–607.

Reprint of 'Draw your assay: Fabrication of low-cost paper-based diagnostic and multi-well test zones by drawing on a paper'

Talanta, 145, 73–77.

Revealing the Nature of Molecule–Electrode Contact in Tunneling Junctions Using Raw Data Heat Maps

J. Phys. Chem. Lett., 6(24), 4952–4958.

Revisiting the Challenges in Fabricating Uniform Coatings with Polyfunctional Molecules on High Surface Energy Materials

Coatings, 5(4), 1002–1018.

Stereo-electronic effects in charge transport through large-area junctions

8th African Materials Research Society Meeting. Presented at the 8th African Materials Research Society Meeting, Accra, Ghana.

The Porter-Whitesides Discrepancy: Revisiting Odd-Even Effects in Wetting Properties of n-Alkanethiolate SAMs

Coatings, 5(4), 1034–1055.

Topographical changes of liquid-metal alloys as a function of temperature

250th American Chemical Society National Meeting & Exposition. Presented at the 250th American Chemical Society National Meeting & Exposition, Boston, MA, United States.

Tracking water droplets under descent and deformation

ACM SIGGRAPH 2015 Posters on - SIGGRAPH '15.

Copper(I) halides inhibit olefin isomerized by-products from phosphine-based Grubbs' metathesis catalysts in polar protic solvents

Transition Metal Chemistry, 39(7), 763–767.

Fabrication of low-cost paper-based microfluidic devices by embossing or cut-and-stack methods

Chemistry of Materials, 26(14), 4230–4237.