Korukonda Linga Murty

Exploring the stability, thermodynamic and mechanical properties of zirconium oxides and suboxides under temperature and pressure: A first-principles predictions

JOURNAL OF NUCLEAR MATERIALS, 591.

In-situ EBSD analysis of hydride phase transformation and its effect on micromechanical behavior in Zircaloy-4 under uniaxial tensile loading

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 30, 6653–6667.

Novel core-layer-shell structured nano-composite precipitates formed in selective laser melted reduced activation ferritic-martensitic steel

MATERIALS TODAY COMMUNICATIONS, 41.

Understanding the effect of grain boundary solute segregation on the creep behaviour of thermally stable nanocrystalline materials: a theoretical approach

Wani, I., Rai, N., Murty, K. L., & Gollapudi, S. (2024, December 16). PHILOSOPHICAL MAGAZINE.

Microstructures and wear resistance of Zr-4 and N36 alloys subjected to pulsed laser surface remelting

JOURNAL OF NUCLEAR MATERIALS, 577.

Strength-ductility synergy through tailoring heterostructures of hot-rolled ferritic-martensitic steels containing varying Si contents

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 886.

A quasi in-situ study on the work hardening and softening mechanisms of Ti-33Zr-12Al-6V alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 835.

High Temperature Deformation Behavior of a Fe-25Ni-20Cr (Wt Pct) Austenitic Stainless Steel

Alomari, A. S., Kumar, N., Hawary, M., & Murty, K. L. (2022, June 14). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 6.

Revealing Microstructural, Textural, and Hardness Evolution of Ti-6Al-4V Sheet Cooled From Sub beta-Transus Temperature at Different Rates

Chai, L., Xia, J., Murty, K. L., Gu, X., Fan, J., & Yao, Z. (2022, June 14). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE.

A strategy to introduce gradient equiaxed grains into Zr sheet by combining laser surface treatment, rolling and annealing

SCRIPTA MATERIALIA, 196.

Effect of friction stir processing and subsequent annealing on microstructure and mechanical properties of a metastable beta-Zr alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 822.

Accelerated crack growth experiments of SS304H for dry storage canister in substitute ocean water - Effect of temperature

MATERIALS TODAY COMMUNICATIONS, 23.

Characterization of stress-rupture behavior of nuclear-grade C26M2 FeCrAl alloy for accident-tolerant fuel cladding via burst testing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 791.

Correlation of microstructural, textural characteristics and hardness of Ti-6Al-4V sheet beta-cooled at different rates

JOURNAL OF MATERIALS SCIENCE, 55(19), 8346–8362.

Effect of Strain Range on High Temperature Creep-Fatigue Behaviour of Fe-25Ni-20Cr (wt.%) Austenitic Stainless Steel (Alloy 709)

MATERIALS AT HIGH TEMPERATURES, 38(1), 47–60.

Effects of composition on phase stabilities and elastic properties in TiZrAlV alloys : Experiments and first-principles calculations

JOURNAL OF ALLOYS AND COMPOUNDS, 863.

High-temperature effects on creep-fatigue interaction of the Alloy 709 austenitic stainless steel

INTERNATIONAL JOURNAL OF FATIGUE, 143.

Microstructural characteristics and hardness of CoNiTi medium-entropy alloy coating on pure Ti substrate prepared by pulsed laser cladding

JOURNAL OF ALLOYS AND COMPOUNDS, 849.

Stress Corrosion Cracking Behavior of Austenitic Stainless Steel SS304 for Dry Storage Canisters in Simulated Sea-Water

TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 1431–1442.

Twinning behaviors and grain refinement mechanisms during friction stir processing of Zr alloy

MATERIALS CHARACTERIZATION, 163.

A multi-deformation mechanisms assisted metastable beta-ZrTiAlV alloy exhibits high yield strength and high work hardening rate

JOURNAL OF ALLOYS AND COMPOUNDS, 816.

Biaxial Creep Behavior of Nb-Modified Zircaloys

NUCLEAR TECHNOLOGY, 206(5), 706–716.

Effect of hold time on high temperature creep-fatigue behavior of Fe-25Ni-20Cr (wt.%) austenitic stainless steel (Alloy 709)

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 771.

Effect of hydriding on the creep behavior of HANA-4 zirconium alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 767.

Effect of varying a phase fraction on the mechanical properties and deformation mechanisms in a metastable beta-ZrTiAlV alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 772.

Effects of pulsed laser surface treatments on microstructural characteristics and hardness of CrCoNi medium-entropy alloy

PHILOSOPHICAL MAGAZINE, 99(24), 3015–3031.

Experimental and theoretical investigation of crystallography and variant selection during massive transformation in Zr alloy

PHILOSOPHICAL MAGAZINE, 99(10), 1163–1183.

Fracture Mechanics-Based Study of Stress Corrosion Cracking of SS304 Dry Storage Canister for Spent Nuclear Fuel

TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 1089–1097.

Misorientation characteristics and textural changes induced by dense twins in high-purity Ti sheet after small strain rolling

SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 62(11), 1968–1975.

Serrated yielding in an advanced stainless steel Fe-25Ni-20Cr (wt%)

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 751, 292–302.

The effects of increasing deformation strain on the microstructural evolution of a metastable beta-Zr alloy

JOURNAL OF ALLOYS AND COMPOUNDS, 800, 208–218.

Anisotropic grain growth kinetics in nanocrystalline nickel

PHILOSOPHICAL MAGAZINE LETTERS, 98(11), 494–501.

Creep Behavior and Microstructural Evolution of a Fe-20Cr-25Ni (Mass Percent) Austenitic Stainless Steel (Alloy 709) at Elevated Temperatures

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A(2), 641–654.

Effect of initial orientation on dynamic recrystallization of a zirconium alloy during hot deformation

MATERIALS CHARACTERIZATION, 145, 444–453.

Enhanced ductility in dynamic strain aging regime in a Fe-25Ni-20Cr austenitic stainless steel

Materials Science and Engineering: A, 729, 157–160.

Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy

JOURNAL OF ALLOYS AND COMPOUNDS, 748, 163–170.

Study of deformation mechanisms in a metastable beta Zr alloy during compression

MATERIALS LETTERS, 237, 172–175.

Understanding Creep-Fatigue Interaction in Fe-25Ni-20Cr (wt%) Austenitic Stainless Steel

In Challenges in Mechanics of Time-Dependent Materials, Volume 2 (pp. 33–38).

Understanding thermally activated plastic deformation behavior of Zircaloy-4

JOURNAL OF NUCLEAR MATERIALS, 504, 41–49.

Anisotropic Biaxial Creep of Textured Nb-Modified Zircaloy-4 Tubing

In Mechanical and Creep Behavior of Advanced Materials (pp. 19–32).

Creep, Deformation and Fracture Studies of Materials for Various Technologies in the Nuclear Materials Research Group at NC State

In Mechanical and Creep Behavior of Advanced Materials (pp. 3–18).

Dislocation Cross-Slip Controlled Creep at High Stresses and Transitional Creep Mechanisms in Zircaloy-4

MECHANICAL AND CREEP BEHAVIOR OF ADVANCED MATERIALS, pp. 65–77.

Effect of Mo and Bi Additions on the Microstructure of Zr–Cr–Fe Alloy After β-Quenching

In Mechanical and Creep Behavior of Advanced Materials (pp. 183–192).

Evolution of microstructure and second-phase particles in Zr-Sn-Nb-Fe alloy tube during Pilger processing

JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 54(12), 1321–1329.

Formability of a wrought Mg alloy evaluated by impression testing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 712, 140–145.

Fracture Behavior and Grain Boundary Sliding During High-Temperature Low-Stress Deformation of AZ31 Magnesium Alloy

In Mechanical and Creep Behavior of Advanced Materials (pp. 279–287).

Synergistic Effects of Neutron Irradiation and Interstitial Nitrogen on Strain Aging in Ferritic Steels

In Mechanical and Creep Behavior of Advanced Materials (pp. 151–164).

Understanding effect of 3.5 wt.% NaCl on the corrosion of Al0.1CoCrFeNi high-entropy alloy

Journal of Nuclear Materials, 495, 154–163.

Understanding plastic deformation mechanism(s) in recrystallized Zircaloy-4

Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017, vol 2.

alpha ->beta Transformation characteristics revealed by pulsed laser-induced non-equilibrium microstructures in duplex-phase Zr alloy

SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 60(8), 1255–1262.

Effects of Microstructure and Processing Methods on Creep Behavior of AZ91 Magnesium Alloy

Journal of Materials Engineering and Performance, 25(9), 3697–3709.

Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 669, 171–177.

Microstructural, textural and hardness evolution of commercially pure Zr surface-treated by high current pulsed electron beam

APPLIED SURFACE SCIENCE, 390, 430–434.

Modeling irradiation creep of graphite using rate theory

JOURNAL OF NUCLEAR MATERIALS, 473, 197–205.

The Role of Grain Size on Neutron Irradiation Response of Nanocrystalline Copper

MATERIALS, 9(3).

{112̅1}-{101̅2} double twinning in a Zircaloy-4 alloy during rolling at ambient temperature

Scripta Materialia, 122, 77–81.

A special twin relationship or a common Burgers misorientation between alpha plates after beta quenching in Zr alloy?

MATERIALS CHARACTERIZATION, 104, 61–65.

Coble, Orowan Strengthening, and Dislocation Climb Mechanisms in a Nb-Modified Zircaloy Cladding

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A(10), 4646–4660.

Dislocation Density Evolution During Creep of AZ31 Mg Alloy: A Study by X-ray Diffraction Line Profile Analysis

Metallography, Microstructure, and Analysis, 4(5), 337–343.

Fracture Behavior of AZ31 Magnesium Alloy During Low-Stress High-Temperature Deformation

Metallography, Microstructure, and Analysis, 4(2), 91–101.

High temperature creep and deformation microstructures in recrystallized Zircaloy-4

PHILOSOPHICAL MAGAZINE, 95(15), 1656–1679.

Investigation of Portevin - Le Chatelier effect in HT-9 steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 631, 120–125.

Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures

MATERIALS & DESIGN, 85, 296–308.

Microstructural approach to equal channel angular processing of commercially pure titanium—A review

Transactions of Nonferrous Metals Society of China, 25(5), 1353–1366.

Creep Behavior of Hydrogenated Zirconium Alloys

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 23(10), 3649–3656.

Dislocation cross-slip controlled creep in Zircaloy-4 at high stresses

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 623, 114–123.

Effect of Low Dose Neutron Irradiation on Tensile Behavior of HT-9 Steel at Room Temperature

In TMS 2014: 143rd Annual Meeting & Exhibition (pp. 147–154).

Loading Rate-Dependent Mechanical Properties of Bulk Two-Phase Nanocrystalline Al-Pb Alloys Studied by Nanoindentation

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A(11), 5249–5258.

Microstructural development of high temperature deformed AZ31 magnesium alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 626, 195–202.

Microstructure and mechanical behavior of neutron irradiated ultrafine grained ferritic steel

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 615, 128–138.

Microstructure-mechanical property correlation of cryo rolled Zircaloy-4

JOURNAL OF NUCLEAR MATERIALS, 456, 287–291.

Burst and Biaxial Creep of Thin-Walled Tubing of Low c/a-Ratio HCP Metals

6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION, Vol. 55, pp. 443–450.

Characterization of hot deformation behavior of Zr-1.0Sn-0.3Nb-0.3Fe-0.1Cr using processing map

Proceedings of the 21st International Conference on Nuclear Engineering - 2013, vol 1.

Creep deformation behavior of Sn-Zn solder alloys

JOURNAL OF MATERIALS SCIENCE, 49(5), 2127–2135.

Early Damage Mechanisms in Nuclear Grade Graphite under Irradiation

Materials Research Letters, 2(1), 43–50.

Effect of Mo and Bi on mechanical properties of Zr-Fe-Cr alloy at room ternperature

Proceedings of the 21st International Conference on Nuclear Engineering - 2013, vol 1.

Effect of predeformation on microstructural evolution of a Zr alloy during 550-700 degrees C aging after beta quenching

ACTA MATERIALIA, 61(8), 3099–3109.

Experimental observation of 12 alpha variants inherited from one beta grain in a Zr alloy

JOURNAL OF NUCLEAR MATERIALS, 440(1-3), 377–381.

Influence of grain size on radiation effects in a low carbon steel

JOURNAL OF NUCLEAR MATERIALS, 443(1-3), 302–310.

Investigation of microstructure and mechanical properties of low dose neutron irradiated HT-9 steel

ANNALS OF NUCLEAR ENERGY, 65, 91–96.

Twinning during recrystallization cooling in alpha-Zr alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 576, 320–325.

Creep behavior of ultra-fine grained Zn-4.5Al

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(27-28), 7382–7386.

Creep in nanocrystalline materials: Role of stress assisted grain growth

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(21-22), 5773–5781.

High temperature deformation characteristics of Zirlo (TM) tubing via ring-creep and burst tests

Seok, C. S., Marple, B., Song, Y. J., Gollapudi, S., Charit, I., & Murty, K. L. (2011, March). NUCLEAR ENGINEERING AND DESIGN, Vol. 241, pp. 599–602.

Irradiation Induced Creep of Graphite

JOM, 62(9), 93–99.

Materials for next-generation nuclear plants: Objectives and challenges

JOM: the Journal of the Minerals, Metals & Materials Society, 62(9), 60–61.

Newtonian viscous creep in metals

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 85–91.

Structural materials issues for the next generation fission reactors

JOM, 62(9), 67–74.

Temperature Dependence of the Dynamics of Portevin-Le Chatelier Effect in Al-2.5 Pct Mg Alloy

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A(5), 1184–1190.

Understanding creep in nanocrystalline materials

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 373–378.

Creep mechanisms in TI-3Al-2.5V alloy tubing deformed under closed-end internal gas pressurization

ACTA MATERIALIA, 56(10), 2406–2419.

Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 39A(10), 2528–2534.

Newtonian viscous creep in Ti-3Al-2.5V

PHILOSOPHICAL MAGAZINE, 88(9), 1357–1367.

Static strain aging and dislocation-impurity interactions in irradiated mild steel

Murty, K. L., & Charit, I. (2008, December 1). JOURNAL OF NUCLEAR MATERIALS, Vol. 382, pp. 217–222.

Strengthening mechanisms in nanocrystalline alloys

Scattergood, R. O., Koch, C. C., Murty, K. L., & Brenner, D. (2008, October 15). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 3–11.

Stress rupture characteristics of zirconium alloy cladding under closed-end internal pressurization

Proceedings of 16th International Conference on Nuclear Engineering-Volume 1, 385–388.

Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

Murty, K. L., & Charit, I. (2008, December 15). JOURNAL OF NUCLEAR MATERIALS, Vol. 383, pp. 189–195.

Characterization of stress rupture behavior of cornmercial-purity-Ti via burst testing

Srikant, G., Marple, B., Charit, I., & Murty, K. L. (2007, August 15). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 463, pp. 203–207.

Creep behavior of niobium-modified zirconium alloys

JOURNAL OF NUCLEAR MATERIALS, 374(3), 354–363.

Determination of Activation Volume in Nanocrystalline Cu Using the Shear Punch Test

Advanced Engineering Materials, 9(10), 855–859.

Mechanical behavior of nanocrystalline copper

Materials Science and Engineering: A, 463(1-2), 14–21.

Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests

JOURNAL OF MATERIALS SCIENCE, 42(14), 5581–5588.

Proceedings of the Symposium on Radiation Effects, Deformation and Phase Transformations in Metals and Ceramics, Organized in Honor of Prof. Monroe S. Wechsler - TMS Annual Meeting, San Antonio, Texas, USA 12-16 March 2006 - Preface

Murty, K. L., Mansur, L. K., Simonen, E. P., & Bajaj, R. (2007, April 15). JOURNAL OF NUCLEAR MATERIALS, Vol. 361, pp. VII-IX.

Synergistic effects of interstitial impurities and radiation defects on mechanical characteristics of ferritic steels

Charit, I., Seok, C. S., & Murty, K. L. (2007, April 15). JOURNAL OF NUCLEAR MATERIALS, Vol. 361, pp. 262–273.

The mechanical behavior of multiphase nanocrystalline materials

JOM, 59(3), 66–70.

Thickness and clearance effects in shear punch testing

ADVANCED ENGINEERING MATERIALS, 9(3), 157–160.

WITHDRAWN: Structural materials for Gen-IV nuclear reactors: Challenges and opportunities

Journal of Nuclear Materials.

Effect of Pb on the mechanical properties of nanocrystalline Al

SCRIPTA MATERIALIA, 55(2), 155–158.

Finite element analysis of a shear punch test

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(5), 1477–1483.

Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O3

SCRIPTA MATERIALIA, 54(11), 1879–1883.

Shear punch tests for a bulk metallic glass

INTERMETALLICS, 14(12), 1411–1416.

Ball indentation tests for a Zr-based bulk metallic glass

SCRIPTA MATERIALIA, 53(12), 1461–1465.

Breakthroughs in Optimization of Mechanical Properties of Nanostructured Metals and Alloys

Advanced Engineering Materials, 7(9), 787–794.

Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys

Advanced Engineering Materials, 7(9), 787–794.

Creep deformation characteristics of tin and tin-based electronic solder alloys

Metallurgical and Materials Transactions A, 36(1), 99–105.

Effect of annealing temperature on texture and creep anisotropy in Ti3Al2.5V alloy

In Textures of materials: ICOTOM 14: Proceedings of the 14th International Conference on Textures of Materials, held in Leuven, Belgium, July 11-15, 2005 / Paul van Houtte; Leo Kestens. Uetikon-Zuerich, Switzerland ; Enfield, NH: Trans Tech Publications, 2005. (Materials science forum ; 495-497) (Vol. 495-497, pp. 1645–1650).

Effect of temperature on transitions in creep mechanisms in class-A alloys

Murty, K. L., Dentel, G., & Britt, J. (2005, November 25). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 410, pp. 28–31.

Evaluation of mechanical properties using shear–punch testing

Materials Science and Engineering: A, 395(1-2), 307–314.

Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility

SCRIPTA MATERIALIA, 54(2), 251–256.

Texture development and anisotropic deformation of zircaloys

[Review of ]. PROGRESS IN NUCLEAR ENERGY, 48(4), 325–359.

The properties of the ring and burst creep of ZIRLO cladding

Seok, C. S., Bae, B. K., Koo, J. M., & Murty, K. L. (2006, April). ENGINEERING FAILURE ANALYSIS, Vol. 13, pp. 389–397.