Korukonda Murty

Zhou, H., Luan, B., Chen, L., Yang, X., Liu, C., Liu, X., … Murty, K. L. (2024). Exploring the stability, thermodynamic and mechanical properties of zirconium oxides and suboxides under temperature and pressure: A first-principles predictions. JOURNAL OF NUCLEAR MATERIALS, 591. https://doi.org/10.1016/j.jnucmat.2024.154934

Zhang, F., Chai, L., Qi, L., Wang, Y., Wu, L., Pan, H., … Murty, K. L. (2023). Microstructures and wear resistance of Zr-4 and N36 alloys subjected to pulsed laser surface remelting. JOURNAL OF NUCLEAR MATERIALS, 577. https://doi.org/10.1016/j.jnucmat.2023.154284

Yang, T., Chai, L., Wang, H., Li, G., & Murty, K. L. (2023). Strength-ductility synergy through tailoring heterostructures of hot-rolled ferritic-martensitic steels containing varying Si contents. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 886. https://doi.org/10.1016/j.msea.2023.145712

Zhang, F., Luan, B., Shou, H., Zheng, J., Zhang, X., Liu, R., & Murty, K. L. (2022). A quasi in-situ study on the work hardening and softening mechanisms of Ti-33Zr-12Al-6V alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 835. https://doi.org/10.1016/j.msea.2022.142694

Alomari, A. S., Kumar, N., Hawary, M., & Murty, K. L. (2022, June 14). High Temperature Deformation Behavior of a Fe-25Ni-20Cr (Wt Pct) Austenitic Stainless Steel. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 6. https://doi.org/10.1007/s11661-022-06739-6

Chai, L., Xia, J., Murty, K. L., Gu, X., Fan, J., & Yao, Z. (2022, June 14). Revealing Microstructural, Textural, and Hardness Evolution of Ti-6Al-4V Sheet Cooled From Sub beta-Transus Temperature at Different Rates. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE. https://doi.org/10.1007/s11661-022-06737-8

Chai, L., Zhu, Y., Hu, X., Murty, K. L., Guo, N., Chen, L.-Y., … Zhang, L.-C. (2021). A strategy to introduce gradient equiaxed grains into Zr sheet by combining laser surface treatment, rolling and annealing. SCRIPTA MATERIALIA, 196. https://doi.org/10.1016/j.scriptamat.2021.113761

Alsmadi, Z. Y., & Murty, K. L. (2021). Effect of Strain Range on High Temperature Creep-Fatigue Behaviour of Fe-25Ni-20Cr (wt.%) Austenitic Stainless Steel (Alloy 709). MATERIALS AT HIGH TEMPERATURES, 38(1), 47–60. https://doi.org/10.1080/09603409.2020.1859310

Li, S., Luan, B., Liao, Z., Liu, Z., Chu, L., Wen, S., … Liu, Q. (2021). Effect of friction stir processing and subsequent annealing on microstructure and mechanical properties of a metastable beta-Zr alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 822. https://doi.org/10.1016/j.msea.2021.141660

Zhang, F., Luan, B., Chu, L., Wen, S., Zhang, S., Wang, Y., … Murty, K. L. (2021). Effects of composition on phase stabilities and elastic properties in TiZrAlV alloys : Experiments and first-principles calculations. JOURNAL OF ALLOYS AND COMPOUNDS, 863. https://doi.org/10.1016/j.jallcom.2020.158054

Alsmadi, Z. Y., & Murty, K. L. (2021). High-temperature effects on creep-fatigue interaction of the Alloy 709 austenitic stainless steel. INTERNATIONAL JOURNAL OF FATIGUE, 143. https://doi.org/10.1016/j.ijfatigue.2020.105987

Liao, Z., Luan, B., Zhang, X., Liu, R., Murty, K. L., & Liu, Q. (2020). A multi-deformation mechanisms assisted metastable beta-ZrTiAlV alloy exhibits high yield strength and high work hardening rate. JOURNAL OF ALLOYS AND COMPOUNDS, 816. https://doi.org/10.1016/j.jallcom.2019.152642

Tjayadi, L., Kumar, N., & Murty, K. L. (2020). Accelerated crack growth experiments of SS304H for dry storage canister in substitute ocean water - Effect of temperature. MATERIALS TODAY COMMUNICATIONS, 23. https://doi.org/10.1016/j.mtcomm.2020.100929

Joshi, P., Tillman, M., Kumar, N., Murty, K., & Cinbiz, N. (2020). Biaxial Creep Behavior of Nb-Modified Zircaloys. NUCLEAR TECHNOLOGY, 206(5), 706–716. https://doi.org/10.1080/00295450.2019.1674581

Joshi, P., Kombaiah, B., Cinbiz, M. N., & Murty, K. L. (2020). Characterization of stress-rupture behavior of nuclear-grade C26M2 FeCrAl alloy for accident-tolerant fuel cladding via burst testing. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 791. https://doi.org/10.1016/j.msea.2020.139753

Dai, J., Xia, J., Chai, L., Murty, K. L., Guo, N., & Daymond, M. R. (2020). Correlation of microstructural, textural characteristics and hardness of Ti-6Al-4V sheet beta-cooled at different rates. JOURNAL OF MATERIALS SCIENCE, 55(19), 8346–8362. https://doi.org/10.1007/s10853-020-04603-9

Alsmadi, Z. Y., Alomari, A., Kumar, N., & Murty, K. L. (2020). Effect of hold time on high temperature creep-fatigue behavior of Fe-25Ni-20Cr (wt.%) austenitic stainless steel (Alloy 709). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 771. https://doi.org/10.1016/j.msea.2019.138591

Liao, Z., Luan, B., Zhang, X., Liu, R., Murty, K. L., & Liu, Q. (2020). Effect of varying a phase fraction on the mechanical properties and deformation mechanisms in a metastable beta-ZrTiAlV alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 772. https://doi.org/10.1016/j.msea.2019.138784

Xiang, K., Chai, L., Wang, Y., Wang, H., Guo, N., Ma, Y., & Murty, K. L. (2020). Microstructural characteristics and hardness of CoNiTi medium-entropy alloy coating on pure Ti substrate prepared by pulsed laser cladding. JOURNAL OF ALLOYS AND COMPOUNDS, 849. https://doi.org/10.1016/j.jallcom.2020.156704

Tjayadi, L., Kumar, N., & Murty, K. L. (2020). Stress Corrosion Cracking Behavior of Austenitic Stainless Steel SS304 for Dry Storage Canisters in Simulated Sea-Water. TMS 2020 149TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 1431–1442. https://doi.org/10.1007/978-3-030-36296-6_133

Li, S., Luan, B., Chu, L., Zhang, X., Yuan, G., Liu, R., … Liu, Q. (2020). Twinning behaviors and grain refinement mechanisms during friction stir processing of Zr alloy. MATERIALS CHARACTERIZATION, 163. https://doi.org/10.1016/j.matchar.2020.110277

Alomari, A. S., Kumar, N., & Murty, K. L. (2019). Creep Behavior and Microstructural Evolution of a Fe-20Cr-25Ni (Mass Percent) Austenitic Stainless Steel (Alloy 709) at Elevated Temperatures. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 50A(2), 641–654. https://doi.org/10.1007/s11661-018-5044-y

Kombaiah, B., Sarkar, A., & Murty, K. L. (2019). Effect of hydriding on the creep behavior of HANA-4 zirconium alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 767. https://doi.org/10.1016/j.msea.2019.138435

Chai, L., Xiang, K., Xia, J., Fallah, V., Murty, K. L., Yao, Z., & Gan, B. (2019). Effects of pulsed laser surface treatments on microstructural characteristics and hardness of CrCoNi medium-entropy alloy. PHILOSOPHICAL MAGAZINE, 99(24), 3015–3031. https://doi.org/10.1080/14786435.2019.1649499

Wang, J. M., Luan, B. F., Xin, R. L., Xing, Q. F., Murty, K. L., Cayron, C., & Liu, Q. (2019). Experimental and theoretical investigation of crystallography and variant selection during massive transformation in Zr alloy. PHILOSOPHICAL MAGAZINE, 99(10), 1163–1183. https://doi.org/10.1080/14786435.2019.1574408

Tjayadi, L., Kumar, N., & Murty, K. L. (2019). Fracture Mechanics-Based Study of Stress Corrosion Cracking of SS304 Dry Storage Canister for Spent Nuclear Fuel. TMS 2019 148TH ANNUAL MEETING & EXHIBITION SUPPLEMENTAL PROCEEDINGS, pp. 1089–1097. https://doi.org/10.1007/978-3-030-05861-6_106

Dai, J. H., Zeng, L. G., Li, Z. J., Chai, L. J., Zheng, Z. Y., Wu, H., … Guo, N. (2019). Misorientation characteristics and textural changes induced by dense twins in high-purity Ti sheet after small strain rolling. SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 62(11), 1968–1975. https://doi.org/10.1007/s11431-019-9555-9

Alomari, A. S., Kumar, N., & Murty, K. L. (2019). Serrated yielding in an advanced stainless steel Fe-25Ni-20Cr (wt%). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 751, 292–302. https://doi.org/10.1016/j.msea.2019.02.023

Liao, Z., Luan, B., Zhang, X., Xing, Q., Liu, R., Murty, K. L., & Liu, Q. (2019). Study of deformation mechanisms in a metastable beta Zr alloy during compression. MATERIALS LETTERS, 237, 172–175. https://doi.org/10.1016/j.matlet.2018.11.043

Liao, Z., Luan, B., Zhang, X., Liu, R., Murty, K. L., & Liu, Q. (2019). The effects of increasing deformation strain on the microstructural evolution of a metastable beta-Zr alloy. JOURNAL OF ALLOYS AND COMPOUNDS, 800, 208–218. https://doi.org/10.1016/j.jallcom.2019.05.334

Sarkar, A., & Murty, K. L. (2018). Anisotropic grain growth kinetics in nanocrystalline nickel. PHILOSOPHICAL MAGAZINE LETTERS, 98(11), 494–501. https://doi.org/10.1080/09500839.2019.1583391

Zeng, Q., Luan, B., Wang, Y., Zhang, X., Liu, R., Murty, K. L., & Liu, Q. (2018). Effect of initial orientation on dynamic recrystallization of a zirconium alloy during hot deformation. MATERIALS CHARACTERIZATION, 145, 444–453. https://doi.org/10.1016/j.matchar.2018.09.008

Alomari, A. S., Kumar, N., & Murty, K. L. (2018). Enhanced ductility in dynamic strain aging regime in a Fe-25Ni-20Cr austenitic stainless steel. Materials Science and Engineering: A, 729, 157–160. https://doi.org/10.1016/J.MSEA.2018.05.060

Mohamed, W., Gollapudi, S., Charit, I., & Murty, K. L. (2018). Formability of a wrought Mg alloy evaluated by impression testing. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 712, 140–145. https://doi.org/10.1016/j.msea.2017.11.088

Chai, L., Chen, K., Zhi, Y., Murty, K. L., Chen, L.-Y., & Yang, Z. (2018). Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy. JOURNAL OF ALLOYS AND COMPOUNDS, 748, 163–170. https://doi.org/10.1016/j.jallcom.2018.03.126

Kumar, N., Alomari, A., & Murty, K. L. (2018). Understanding Creep-Fatigue Interaction in Fe-25Ni-20Cr (wt%) Austenitic Stainless Steel. In Challenges in Mechanics of Time-Dependent Materials, Volume 2 (pp. 33–38). https://doi.org/10.1007/978-3-319-95053-2_5

Kumar, N., Alomari, A., & Murty, K. L. (2018). Understanding thermally activated plastic deformation behavior of Zircaloy-4. JOURNAL OF NUCLEAR MATERIALS, 504, 41–49. https://doi.org/10.1016/j.jnucmat.2018.03.031

Kumar, N., Grundy, K., Kombaiah, B., Luan, B., & Murty, K. (2017). Anisotropic Biaxial Creep of Textured Nb-Modified Zircaloy-4 Tubing. In Mechanical and Creep Behavior of Advanced Materials (pp. 19–32). https://doi.org/10.1007/978-3-319-51097-2_2

Murty, K. L. (2017). Creep, Deformation and Fracture Studies of Materials for Various Technologies in the Nuclear Materials Research Group at NC State. In Mechanical and Creep Behavior of Advanced Materials (pp. 3–18). https://doi.org/10.1007/978-3-319-51097-2_1

Kombaiah, B., & Murty, K. L. (2017). Dislocation Cross-Slip Controlled Creep at High Stresses and Transitional Creep Mechanisms in Zircaloy-4. MECHANICAL AND CREEP BEHAVIOR OF ADVANCED MATERIALS, pp. 65–77. https://doi.org/10.1007/978-3-319-51097-2_6

Wang, J., Luan, B., Murty, K. L., & Liu, Q. (2017). Effect of Mo and Bi Additions on the Microstructure of Zr–Cr–Fe Alloy After β-Quenching. In Mechanical and Creep Behavior of Advanced Materials (pp. 183–192). https://doi.org/10.1007/978-3-319-51097-2_14

Qiu, R., Song, Z., Luan, B., Yue, Q., Wang, L., Yuan, G., … Liu, Q. (2017). Evolution of microstructure and second-phase particles in Zr-Sn-Nb-Fe alloy tube during Pilger processing. JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY, 54(12), 1321–1329. https://doi.org/10.1080/00223131.2017.1365023

Roodposhti, P. S., & Murty, K. L. (2017). Fracture Behavior and Grain Boundary Sliding During High-Temperature Low-Stress Deformation of AZ31 Magnesium Alloy. In Mechanical and Creep Behavior of Advanced Materials (pp. 279–287). https://doi.org/10.1007/978-3-319-51097-2_23

Kumar, N., Alsabbagh, A., Seok, C. S., & Murty, K. L. (2017). Synergistic Effects of Neutron Irradiation and Interstitial Nitrogen on Strain Aging in Ferritic Steels. In Mechanical and Creep Behavior of Advanced Materials (pp. 151–164). https://doi.org/10.1007/978-3-319-51097-2_12

Kumar, N., Fusco, M., Komarasamy, M., Mishra, R. S., Bourham, M., & Murty, K. L. (2017). Understanding effect of 3.5 wt.% NaCl on the corrosion of Al0.1CoCrFeNi high-entropy alloy. Journal of Nuclear Materials, 495, 154–163. https://doi.org/10.1016/j.jnucmat.2017.08.015

Kumar, N., Alomari, A., & Murty, K. L. (2017). Understanding plastic deformation mechanism(s) in recrystallized Zircaloy-4. Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017, vol 2. https://doi.org/10.1115/msec2017-2882

Chai, L. J., Wang, S. Y., Wu, H., Guo, N., Pan, H. C., Chen, L. Y., … Song, B. (2017). alpha ->beta Transformation characteristics revealed by pulsed laser-induced non-equilibrium microstructures in duplex-phase Zr alloy. SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 60(8), 1255–1262. https://doi.org/10.1007/s11431-016-9038-y

Shahbeigi Roodposhti, P., Sarkar, A., Murty, K. L., & Scattergood, R. O. (2016). Effects of Microstructure and Processing Methods on Creep Behavior of AZ91 Magnesium Alloy. Journal of Materials Engineering and Performance, 25(9), 3697–3709. https://doi.org/10.1007/S11665-016-2222-1

Roodposhti, P. S., Sarkar, A., Murty, K. L., Brody, H., & Scattergood, R. (2016). Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 669, 171–177. https://doi.org/10.1016/j.msea.2016.05.076

Chai, L., Chen, B., Wang, S., Zhang, Z., & Murty, K. L. (2016). Microstructural, textural and hardness evolution of commercially pure Zr surface-treated by high current pulsed electron beam. APPLIED SURFACE SCIENCE, 390, 430–434. https://doi.org/10.1016/j.apsusc.2016.08.128

Sarkar, A., Eapen, J., Raj, A., Murty, K. L., & Burchell, T. D. (2016). Modeling irradiation creep of graphite using rate theory. JOURNAL OF NUCLEAR MATERIALS, 473, 197–205. https://doi.org/10.1016/j.jnucmat.2016.01.036

Mohamed, W., Miller, B., Porter, D., & Murty, K. (2016). The Role of Grain Size on Neutron Irradiation Response of Nanocrystalline Copper. MATERIALS, 9(3). https://doi.org/10.3390/ma9030144

Zhang, M., Luan, B. F., Song, Z. L., Xin, R. L., Murty, K. L., & Liu, Q. (2016). {112̅1}-{101̅2} double twinning in a Zircaloy-4 alloy during rolling at ambient temperature. Scripta Materialia, 122, 77–81. https://doi.org/10.1016/J.SCRIPTAMAT.2016.05.003

Chai, L., Chen, B., Zhou, Z., Murty, K. L., Ma, Y., & Huang, W. (2015). A special twin relationship or a common Burgers misorientation between alpha plates after beta quenching in Zr alloy? MATERIALS CHARACTERIZATION, 104, 61–65. https://doi.org/10.1016/j.matchar.2015.04.008

Kombaiah, B., & Murty, K. L. (2015). Coble, Orowan Strengthening, and Dislocation Climb Mechanisms in a Nb-Modified Zircaloy Cladding. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A(10), 4646–4660. https://doi.org/10.1007/s11661-015-3060-8

Roodposhti, P. S., Sarkar, A., Murty, K. L., & Scattergood, R. O. (2015). Dislocation Density Evolution During Creep of AZ31 Mg Alloy: A Study by X-ray Diffraction Line Profile Analysis. Metallography, Microstructure, and Analysis, 4(5), 337–343. https://doi.org/10.1007/S13632-015-0220-6

Kombaiah, B., & Murty, K. L. (2015). Dislocation cross-slip controlled creep in Zircaloy-4 at high stresses. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 623, 114–123. https://doi.org/10.1016/j.msea.2014.11.040

Roodposhti, P. S., Sarkar, A., & Murty, K. L. (2015). Fracture Behavior of AZ31 Magnesium Alloy During Low-Stress High-Temperature Deformation. Metallography, Microstructure, and Analysis, 4(2), 91–101. https://doi.org/10.1007/S13632-015-0189-1

Kombaiah, B., & Murty, K. L. (2015). High temperature creep and deformation microstructures in recrystallized Zircaloy-4. PHILOSOPHICAL MAGAZINE, 95(15), 1656–1679. https://doi.org/10.1080/14786435.2015.1042939

Sarkar, A., Maloy, S. A., & Murty, K. L. (2015). Investigation of Portevin - Le Chatelier effect in HT-9 steel. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 631, 120–125. https://doi.org/10.1016/j.msea.2015.02.022

Chai, L., Luan, B., Xiao, D., Zhang, M., Murty, K. L., & Liu, Q. (2015). Microstructural and textural evolution of commercially pure Zr sheet rolled at room and liquid nitrogen temperatures. MATERIALS & DESIGN, 85, 296–308. https://doi.org/10.1016/j.matdes.2015.06.088

Roodposhti, P. S., Farahbakhsh, N., Sarkar, A., & Murty, K. L. (2015). Microstructural approach to equal channel angular processing of commercially pure titanium—A review. Transactions of Nonferrous Metals Society of China, 25(5), 1353–1366. https://doi.org/10.1016/S1003-6326(15)63734-7

Roodposhti, P. S., Sarkar, A., & Murty, K. L. (2015). Microstructural development of high temperature deformed AZ31 magnesium alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 626, 195–202. https://doi.org/10.1016/j.msea.2014.12.064

Sarkar, A., & Murty, K. L. (2015). Microstructure-mechanical property correlation of cryo rolled Zircaloy-4. JOURNAL OF NUCLEAR MATERIALS, 456, 287–291. https://doi.org/10.1016/j.jnucmat.2014.09.071

Luan, B. F., Qiu, R. S., Zhou, Z., Murty, K. L., Zhou, J., & Liu, Q. (2014). Characterization of hot deformation behavior of Zr-1.0Sn-0.3Nb-0.3Fe-0.1Cr using processing map. Proceedings of the 21st International Conference on Nuclear Engineering - 2013, vol 1. https://doi.org/10.1115/icone21-15186

Sarkar, A., Boopathy, K., Eapen, J., & Murty, K. L. (2014). Creep Behavior of Hydrogenated Zirconium Alloys. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 23(10), 3649–3656. https://doi.org/10.1007/s11665-014-1129-y

Shrestha, T., Gollapudi, S., Charit, I., & Murty, K. L. (2014). Creep deformation behavior of Sn-Zn solder alloys. JOURNAL OF MATERIALS SCIENCE, 49(5), 2127–2135. https://doi.org/10.1007/s10853-013-7905-5

Sarkar, A., Alsabbagh, A. H., & Murty, K. L. (2014). Effect of Low Dose Neutron Irradiation on Tensile Behavior of HT-9 Steel at Room Temperature. In TMS 2014: 143rd Annual Meeting & Exhibition (pp. 147–154). https://doi.org/10.1007/978-3-319-48237-8_20

Luan, B. F., Yang, L. Q., Wei, T. G., Murty, K. L., Long, C. S., & Liu, Q. (2014). Effect of Mo and Bi on mechanical properties of Zr-Fe-Cr alloy at room ternperature. Proceedings of the 21st International Conference on Nuclear Engineering - 2013, vol 1. https://doi.org/10.1115/icone21-15325

Sarkar, A., Alsabbagh, A. H., & Murty, K. L. (2014). Investigation of microstructure and mechanical properties of low dose neutron irradiated HT-9 steel. ANNALS OF NUCLEAR ENERGY, 65, 91–96. https://doi.org/10.1016/j.anucene.2013.11.008

Varam, S., Rajulapati, K. V., Rao, K. B. S., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2014). Loading Rate-Dependent Mechanical Properties of Bulk Two-Phase Nanocrystalline Al-Pb Alloys Studied by Nanoindentation. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A(11), 5249–5258. https://doi.org/10.1007/s11661-014-2425-8

Alsabbagh, A., Sarkar, A., Miller, B., Burns, J., Squires, L., Porter, D., … Murty, K. L. (2014). Microstructure and mechanical behavior of neutron irradiated ultrafine grained ferritic steel. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 615, 128–138. https://doi.org/10.1016/j.msea.2014.07.070

Murty, K. L., Seok, C. S., & Kombaiah, B. (2013). Burst and Biaxial Creep of Thin-Walled Tubing of Low c/a-Ratio HCP Metals. 6TH INTERNATIONAL CONFERENCE ON CREEP, FATIGUE AND CREEP-FATIGUE INTERACTION, Vol. 55, pp. 443–450. https://doi.org/10.1016/j.proeng.2013.03.278

Eapen, J., Krishna, R., Burchell, T. D., & Murty, K. L. (2013). Early Damage Mechanisms in Nuclear Grade Graphite under Irradiation. Materials Research Letters, 2(1), 43–50. https://doi.org/10.1080/21663831.2013.841782

Chai, L., Luan, B., Murty, K. L., & Liu, Q. (2013). Effect of predeformation on microstructural evolution of a Zr alloy during 550-700 degrees C aging after beta quenching. ACTA MATERIALIA, 61(8), 3099–3109. https://doi.org/10.1016/j.actamat.2013.02.001

Chai, L., Luan, B., Zhang, M., Murty, K. L., & Liu, Q. (2013). Experimental observation of 12 alpha variants inherited from one beta grain in a Zr alloy. JOURNAL OF NUCLEAR MATERIALS, 440(1-3), 377–381. https://doi.org/10.1016/j.jnucmat.2013.05.053

Alsabbagh, A., Valiev, R. Z., & Murty, K. L. (2013). Influence of grain size on radiation effects in a low carbon steel. JOURNAL OF NUCLEAR MATERIALS, 443(1-3), 302–310. https://doi.org/10.1016/j.jnucmat.2013.07.049

Chai, L., Luan, B., Murty, K. L., & Liu, Q. (2013). Twinning during recrystallization cooling in alpha-Zr alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 576, 320–325. https://doi.org/10.1016/j.msea.2013.04.010

Seok, C. S., Marple, B., Song, Y. J., Gollapudi, S., Charit, I., & Murty, K. L. (2011, March). High temperature deformation characteristics of Zirlo (TM) tubing via ring-creep and burst tests. NUCLEAR ENGINEERING AND DESIGN, Vol. 241, pp. 599–602. https://doi.org/10.1016/j.nucengdes.2010.04.017

Chatterjee, A., Murty, K. L., Gayathri, N., Mukherjee, P., & Barat, P. (2011). Temperature Dependence of the Dynamics of Portevin-Le Chatelier Effect in Al-2.5 Pct Mg Alloy. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 42A(5), 1184–1190. https://doi.org/10.1007/s11661-010-0530-x

Gobien, J. M., Murty, K. L., Scattergood, R. O., Goodwin, F., & Koch, C. C. (2010). Creep behavior of ultra-fine grained Zn-4.5Al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(27-28), 7382–7386. https://doi.org/10.1016/j.msea.2010.08.020

Gollapudi, S., Rajulapati, K. V., Charit, I., Koch, C. C., Scattergood, R. O., & Murty, K. L. (2010). Creep in nanocrystalline materials: Role of stress assisted grain growth. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(21-22), 5773–5781. https://doi.org/10.1016/j.msea.2010.05.048

Burchell, T. D., Murty, K. L., & Eapen, J. (2010). Irradiation Induced Creep of Graphite. JOM, 62(9), 93–99. https://doi.org/10.1007/s11837-010-0145-0

Murty, K. L. (2010). Materials for next-generation nuclear plants: Objectives and challenges. JOM: the Journal of the Minerals, Metals & Materials Society, 62(9), 60–61. https://doi.org/10.1007/s11837-010-0139-y

Murty, K. L., Gollapudi, S., & Charit, I. (2010). Newtonian viscous creep in metals. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 85–91. https://doi.org/10.1007/s12666-010-0012-2

Chant, I., & Murty, K. L. (2010). Structural materials issues for the next generation fission reactors. JOM, 62(9), 67–74. https://doi.org/10.1007/S11837-010-0142-3

Gollapudi, S., Rajulapati, K. V., Charit, I., Youssef, K. M., Koch, C. C., Scattergood, R. O., & Murty, K. L. (2010). Understanding creep in nanocrystalline materials. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 373–378. https://doi.org/10.1007/s12666-010-0050-9

Charit, I., & Murty, K. L. (2008). Creep behavior of niobium-modified zirconium alloys. JOURNAL OF NUCLEAR MATERIALS, 374(3), 354–363. https://doi.org/10.1016/j.jnucmat.2007.08.019

Gollapudi, S., Charit, I., & Murty, K. L. (2008). Creep mechanisms in TI-3Al-2.5V alloy tubing deformed under closed-end internal gas pressurization. ACTA MATERIALIA, 56(10), 2406–2419. https://doi.org/10.1016/j.actamat.2008.01.052

Rajulapati, K. V., Scattergood, R. O., Murty, K. L., Horita, Z., Langdon, T. G., & Koch, C. C. (2008). Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 39A(10), 2528–2534. https://doi.org/10.1007/s11661-008-9593-3

Gollapudi, S., Bhosle, V., Charit, I., & Murty, K. L. (2008). Newtonian viscous creep in Ti-3Al-2.5V. PHILOSOPHICAL MAGAZINE, 88(9), 1357–1367. https://doi.org/10.1080/14786430802144154

Murty, K. L., & Charit, I. (2008, December 1). Static strain aging and dislocation-impurity interactions in irradiated mild steel. JOURNAL OF NUCLEAR MATERIALS, Vol. 382, pp. 217–222. https://doi.org/10.1016/j.jnucmat.2008.08.008

Scattergood, R. O., Koch, C. C., Murty, K. L., & Brenner, D. (2008, October 15). Strengthening mechanisms in nanocrystalline alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 3–11. https://doi.org/10.1016/j.msea.2007.04.132

Marple, B., Song, Y. J., Gollapudi, S., Murty, K. L., & Charit, I. (2008). Stress rupture characteristics of zirconium alloy cladding under closed-end internal pressurization. Proceedings of 16th International Conference on Nuclear Engineering-Volume 1, 385–388. https://doi.org/10.1115/icone16-48006

Murty, K. L., & Charit, I. (2008, December 15). Structural materials for Gen-IV nuclear reactors: Challenges and opportunities. JOURNAL OF NUCLEAR MATERIALS, Vol. 383, pp. 189–195. https://doi.org/10.1016/j.jnucmat.2008.08.044

Srikant, G., Marple, B., Charit, I., & Murty, K. L. (2007, August 15). Characterization of stress rupture behavior of cornmercial-purity-Ti via burst testing. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 463, pp. 203–207. https://doi.org/10.1016/j.msea.2006.06.145

Guduru, R. K., Wong, P. Z., Darling, K. A., Koch, C. C., Murty, K. L., & Scattergood, R. O. (2007). Determination of Activation Volume in Nanocrystalline Cu Using the Shear Punch Test. Advanced Engineering Materials, 9(10), 855–859. https://doi.org/10.1002/adem.200700181

Guduru, R. K., Murty, K. L., Youssef, K. M., Scattergood, R. O., & Koch, C. C. (2007). Mechanical behavior of nanocrystalline copper. Materials Science and Engineering: A, 463(1-2), 14–21. https://doi.org/10.1016/j.msea.2006.07.165

Guduru, R. K., Darling, K. A., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2007). Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests. JOURNAL OF MATERIALS SCIENCE, 42(14), 5581–5588. https://doi.org/10.1007/s10853-006-1095-3

Murty, K. L., Mansur, L. K., Simonen, E. P., & Bajaj, R. (2007, April 15). Proceedings of the Symposium on Radiation Effects, Deformation and Phase Transformations in Metals and Ceramics, Organized in Honor of Prof. Monroe S. Wechsler - TMS Annual Meeting, San Antonio, Texas, USA 12-16 March 2006 - Preface. JOURNAL OF NUCLEAR MATERIALS, Vol. 361, pp. VII-IX. https://doi.org/10.1016/j.jnucmat.2006.12.002

Charit, I., Seok, C. S., & Murty, K. L. (2007, April 15). Synergistic effects of interstitial impurities and radiation defects on mechanical characteristics of ferritic steels. JOURNAL OF NUCLEAR MATERIALS, Vol. 361, pp. 262–273. https://doi.org/10.1016/j.jnucmat.2006.12.003

Koch, C. C., Scattergood, R. O., & Murty, K. L. (2007). The mechanical behavior of multiphase nanocrystalline materials. JOM, 59(3), 66–70. https://doi.org/10.1007/s11837-007-0042-3

Guduru, R. K., Nagasekhar, A. V., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2007). Thickness and clearance effects in shear punch testing. ADVANCED ENGINEERING MATERIALS, 9(3), 157–160. https://doi.org/10.1002/adem.200600255

Murty, K. L., & Charit, I. (2007). WITHDRAWN: Structural materials for Gen-IV nuclear reactors: Challenges and opportunities. Journal of Nuclear Materials. https://doi.org/10.1016/j.jnucmat.2007.09.029

Rajulapati, K. V., Scattergood, R. O., Murty, K. L., Duscher, G., & Koch, C. C. (2006). Effect of Pb on the mechanical properties of nanocrystalline Al. SCRIPTA MATERIALIA, 55(2), 155–158. https://doi.org/10.1016/j.scriptamat.2006.03.051

Guduru, R. K., Nagasekhar, A. V., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2006). Finite element analysis of a shear punch test. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(5), 1477–1483. https://doi.org/10.1007/s11661-006-0092-0

Guduru, R. K., Scattergood, R. O., Koch, C. C., Murty, K. L., Guruswamy, S., & McCarter, M. K. (2006). Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O3. SCRIPTA MATERIALIA, 54(11), 1879–1883. https://doi.org/10.1016/j.scriptamat.2006.02.014

Youssef, K. M., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2006). Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility. SCRIPTA MATERIALIA, 54(2), 251–256. https://doi.org/10.1016/j.scriptamat.2005.09.028

Guduru, R. K., Darling, K. A., Scattergood, R. O., Koch, C. C., Murty, K. L., Bakkal, M., & Shih, A. J. (2006). Shear punch tests for a bulk metallic glass. INTERMETALLICS, 14(12), 1411–1416. https://doi.org/10.1016/j.intermet.2006.01.052

Murty, K. L., & Charit, I. (2006). [Review of Texture development and anisotropic deformation of zircaloys]. PROGRESS IN NUCLEAR ENERGY, 48(4), 325–359. https://doi.org/10.1016/j.pnucene.2005.09.011

Seok, C. S., Bae, B. K., Koo, J. M., & Murty, K. L. (2006, April). The properties of the ring and burst creep of ZIRLO cladding. ENGINEERING FAILURE ANALYSIS, Vol. 13, pp. 389–397. https://doi.org/10.1016/j.engfailanal.2005.02.009

Trichy, G. R., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2005). Ball indentation tests for a Zr-based bulk metallic glass. SCRIPTA MATERIALIA, 53(12), 1461–1465. https://doi.org/10.1016/j.scriptamat.2005.08.010

Koch, C. C., Youssef, K. M., Scattergood, R. O., & Murty, K. L. (2005). Breakthroughs in Optimization of Mechanical Properties of Nanostructured Metals and Alloys. Advanced Engineering Materials, 7(9), 787–794. https://doi.org/10.1002/adem.200500094

Koch, C. C., Youssef, K. M., Scattergood, R. O., & Murty, K. L. (2005). Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys. Advanced Engineering Materials, 7(9), 787–794. https://doi.org/10.1002/adern.200500094

Mathew, M. D., Yang, H., Movva, S., & Murty, K. L. (2005). Creep deformation characteristics of tin and tin-based electronic solder alloys. Metallurgical and Materials Transactions A, 36(1), 99–105. https://doi.org/10.1007/s11661-005-0142-z

Murty, K. L., Kishore, R., Yan, J., Scattergood, R. O., & Helsel, A. W. (2005). Effect of annealing temperature on texture and creep anisotropy in Ti3Al2.5V alloy. In Textures of materials: ICOTOM 14: 
Proceedings of the 14th International Conference on Textures of Materials, held in Leuven, Belgium, July 11-15, 2005 / 
Paul van Houtte;  Leo Kestens. Uetikon-Zuerich, Switzerland ; Enfield, NH: Trans Tech Publications, 2005. (Materials science forum ; 495-497) (Vol. 495-497, pp. 1645–1650). https://doi.org/10.4028/www.scientific.net/msf.495-497.1645

Murty, K. L., Dentel, G., & Britt, J. (2005, November 25). Effect of temperature on transitions in creep mechanisms in class-A alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 410, pp. 28–31. https://doi.org/10.1016/j.msea.2005.08.006

Guduru, R. K., Darling, K. A., Kishore, R., Scattergood, R. O., Koch, C. C., & Murty, K. L. (2005). Evaluation of mechanical properties using shear–punch testing. Materials Science and Engineering: A, 395(1-2), 307–314. https://doi.org/10.1016/j.msea.2004.12.048

Youssef, K. M., Scattergood, R. O., Murty, K. L., Horton, J. A., & Koch, C. C. (2005). Ultrahigh strength and high ductility of bulk nanocrystalline copper. APPLIED PHYSICS LETTERS, 87(9). https://doi.org/10.1063/1.2034122

Murty, K. L., & Mathew, M. D. (2004, March). Nondestructive monitoring of structural materials using automated ball indentation (ABI) technique. NUCLEAR ENGINEERING AND DESIGN, Vol. 228, pp. 81–96. https://doi.org/10.1016/j.nucengdes.2003.06.006

Zhou, Y., Devarajan, B., & Murty, K. L. (2004). Short-term rupture studies of Zircaloy-4 and Nb-modified Zircaloy-4 tubing using closed-end internal pressurization. Nuclear Engineering and Design, 228(1-3), 3–13. https://doi.org/10.1016/j.nucengdes.2003.06.013

Youssef, K. M., Scattergood, R. O., Murty, K. L., & Koch, C. C. (2004). Ultratough nanocrystalline copper with a narrow grain size distribution. APPLIED PHYSICS LETTERS, 85(6), 929–931. https://doi.org/10.1063/1.1779342

Rao, G. S. S., Godavarti, P. S., Mahmood, S. T., & Murty, K. L. (2002). Plastic instability and mechanical anisotropy of textured zinc. Journal of Testing and Evaluation, 30(3), 197–207.

Murty, K. L., & Seok, C. C. (2001). Fracture in ferritic reactor steel - Dynamic strain aging and cyclic loading. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 53(7), 23–26. https://doi.org/10.1007/s11837-001-0082-z

Edsinger, K., & Murty, K. L. (2001). LWR pellet-cladding interactions: Materials solutions to SCC. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 53(7), 9–13. https://doi.org/10.1007/s11837-001-0079-7

Murty, K. L. (2001). Materials issues in light water reactors. JOM: the Journal of the Minerals, Metals & Materials Society, 53(7), 88.

Murty, K. L. (2000). Deformation mechanisms and transients in creep of zircaloys: Applications to nuclear technology. Transactions of the Indian Institute of Metals, 53(3), 107–120.

Mathew, M. D., Movva, S., & Murty, K. L. (2000). Deformation mechanisms in tin and tin-based electronic solder alloys. CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, Vol. 171-1, pp. 655–662. https://doi.org/10.4028/www.scientific.net/kem.171-174.655

Mathew, M. D., Yang, H., Movva, S., & Murty, K. L. (2000). High temperature deformation characteristics of tin-based solder alloys: Application to electronic packaging. Transactions of the Indian Institute of Metals, 53(3), 369–379.

Yim, M. S., & Murty, K. L. (2000). Materials issues in nuclear-waste management. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 52(9), 26–29. https://doi.org/10.1007/s11837-000-0183-0

Murty, K. L. (2000). The internal pressurization creep of Zr alloys for spent-fuel dry storage feasibility. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 52(9), 34–38. https://doi.org/10.1007/s11837-000-0185-y

Mathew, M. D., Murty, K. L., Rao, K. B. S., & Mannan, S. L. (1999). Ball indentation studies on the effect of aging on mechanical behavior of alloy 625. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 264(1-2), 159–166. https://doi.org/10.1016/s0921-5093(98)01098-3

Murty, K. L., Miraglia, P. Q., Mathew, M. D., Shah, V. N., & Haggag, F. M. (1999). Characterization of gradients in mechanical properties of SA-533B steel welds using ball indentation. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 76(6), 361–369. https://doi.org/10.1016/S0308-0161(99)00006-X

Murty, K. L. (1999). Creep studies for Zircaloy life prediction in water reactors. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 51(10), 32–39. https://doi.org/10.1007/s11837-999-0184-6

Seok, C. S., & Murty, K. L. (1999). Effect of dynamic strain aging on mechanical and fracture properties of A516Gr70 steel. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 76(14-15), 945–953. https://doi.org/10.1016/S0308-0161(99)00075-7

Mathew, M. D., Lietzan, L. M., Murty, K. L., & Shah, V. N. (1999). Low temperature aging embrittlement of CF-8 stainless steel. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 269(1-2), 186–196. https://doi.org/10.1016/s0921-5093(99)00140-9

Mathew, M. D., & Murty, K. L. (1999). Non-destructive studies on tensile and fracture properties of molybdenum at low temperatures (148 to 423 K). JOURNAL OF MATERIALS SCIENCE, 34(7), 1497–1503. https://doi.org/10.1023/A:1004547709783

Murty, K. L. (1999). Role and significance of source hardening in radiation embrittlement of iron and ferritic steels. JOURNAL OF NUCLEAR MATERIALS, 270(1-2), 115–128. https://doi.org/10.1016/S0022-3115(98)00766-1

Murty, K. L., Mathew, M. D., & Haggag, F. M. (1998). An investigation of the deformation mechanisms in Sn5%Sb alloy using tensile, creep and ABI tests from ambient to 473K. METALS AND MATERIALS-KOREA, 4(4), 799–802. https://doi.org/10.1007/bf03026401

Malow, T. R., Koch, C. C., Miraglia, P. Q., & Murty, K. L. (1998). Compressive mechanical behavior of nanocrystalline Fe investigated with an automated ball indentation technique. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 252(1), 36–43. https://doi.org/10.1016/s0921-5093(98)00661-3

Wang, Y., & Murty, K. L. (1998). Effect of temperature on mechanical anisotropy of Zircaloy-4 sheet. METALS AND MATERIALS-KOREA, 4(4), 723–726. https://doi.org/10.1007/bf03026387

Murty, K. L., Detemple, K., Kanert, O., & Dehosson, J. T. M. (1998, January). In-situ nuclear magnetic resonance investigation of strain, temperature, and strain-rate variations of deformation-induced vacancy concentration in aluminum. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 29, pp. 153–159. https://doi.org/10.1007/s11661-998-0168-0

Haggag, F. M., Byun, T. S., Hong, J. H., Miraglia, P. Q., & Murty, K. L. (1998). Indentation-Energy-to-Fracture (IEF) parameter for characterization of DBTT in carbon steels using nondestructive Automated Ball Indentation (ABI) technique. Scripta Materialia, 38(4), 645–651.

Murty, K. L., Mathew, M. D., Wang, Y., Shah, V. N., & Haggag, F. M. (1998). Nondestructive determination of tensile properties and fracture toughness of cold worked A36 steel. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 75(11), 831–840. https://doi.org/10.1016/S0308-0161(98)00093-3

Ghosh, G., Kang, S., Murty, K. L., & Notis, M. (1998, November). Special issue on interfacial reactions, solid state transformations and thermal management - Foreword. JOURNAL OF ELECTRONIC MATERIALS, Vol. 27, pp. 1137–1137. https://doi.org/10.1007/s11664-998-0061-z

Murty, K. L., Haggag, F. M., & Mahidhara, R. K. (1997, July). Tensile, creep, and ABI tests on Sn5%Sb solder for mechanical property evaluation. JOURNAL OF ELECTRONIC MATERIALS, Vol. 26, pp. 839–846. https://doi.org/10.1007/s11664-997-0260-z

Murty, K. L. (1997). Zircaloy life prediction and new generation zircaloys for LWRs. Transactions of the Indian Institute of Metals, 50(6), 533–562.

Murty, K. L., & Charit, I. An introduction to nuclear materials: Fundamentals and applications. Weinheim, Germany: Wiley-VCH.

Wang, J. M., Luan, B. F., Murty, K. L., & Liu, Q. Effect of Mo and Bi additions on the microstructure of Zr-Cr-Fe alloy after beta-quenching. Mechanical and creep behavior of advanced materials, 183–192.

Murty, K. L. Effect of c/a-ratio on crystallographic texture and mechanical anisotropy of hexagonal close packed metals. Thermec 2003: International Conference on Processing and Manufacturing of Advanced Materials  (Materials science forum ; v. 426-432)., 426-4(2003), 3575–3580. Uetikon-Zurich, Switzerland: Sci-Tech Pub. Ltd.;  Enfield, N.H.: Trans Tech Pub. Ltd.

Sarkar, A., Alsabbagh, A. H., & Murty, K. L. Effect of low dose neutron irradiation on tensile behavior of ht-9 steel at room temperature. TMS 2014 Supplemental Proceedings, 147–154.

Roodposhti, P. S., Sarkar, A., Murty, K. L., & Scattergood, R. O. [Review of Effects of microstructure and processing methods on creep behavior of AZ91 magnesium alloy]. Journal of Materials Engineering and Performance, 25(9), 3697–3709.

Roodposhti, P. S., & Murty, K. L. Fracture behavior and grain boundary sliding during high-temperature low-stress deformation of AZ31 magnesium alloy. Mechanical and creep behavior of advanced materials, 279–287.

Murty, K. L., Detemple, K., K., & Dehosson, J. In-situ NMR investigation of strain, temperature and strain-rate variations of deformation-induced vacancy concentration in aluminum. In O. B. P. K. Liaw, R. J. Arsenault, & R. E. Green Jr. (Eds.), Nondestructive evaluation and material properties III. Warrendale, Pa.: Minerals, Metals & Materials Society.

Gollapudi, S., Bhosle, V., Charit, I., & Murty, K. L. Low stress viscous creep in a ti-3al-2.5v tubing under internal pressurization. TMS 2010 139th Annual Meeting & Exhibition - Supplemental Proceedings, vol 1: Materials processing and properties, 755–762.

Roodposhti, P. S., Sarkar, N. F. A., & Murty, K. L. Microstructural approach to equal channel angular processing of commercially pure titanium-A review. Transactions of Nonferrous Metals Society of China, 25(5), 1353–1366.

Charit, I., & Murty, K. L. structural materials issues for the next generation fission reactors. JOM: the Journal of the Minerals, Metals & Materials Society, 62(9), 67–74.