Ola Lars Harrysson

Chayasombat, B., Promoppatum, P., Srisawadi, S., Tanprayoon, D., Tapracharoen, K., Tummake, B., … Harrysson, O. L. A. (2024, February 26). Single track formation of TiC reinforced Inconel 718 metal matrix composites using selective laser melting process. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 2. https://doi.org/10.1007/s00170-024-13260-0

Cox Laws, A., Wood, M., Harrysson, O., & Traverson, M. (2023). Novel 3D Custom-Made Silicone Tumor Model as a Support for Teaching Surgical Oncology Principles. Journal of Veterinary Medical Education, 6. https://doi.org/10.3138/jvme-2022-0148

Chambers, A., Traverson, M., Neal, S., Konala, S., & Harrysson, O. (2023). Performances of novel custom 3D-printed cutting guide in canine caudal maxillectomy: a cadaveric study. Frontiers in Veterinary Science, 10. https://doi.org/10.3389/fvets.2023.1127025

Houser, E., Shashaani, S., Harrysson, O., & Jeon, Y. (2023, May 13). Predicting additive manufacturing defects with robust feature selection for imbalanced data. IISE TRANSACTIONS, Vol. 5. https://doi.org/10.1080/24725854.2023.2207633

Weflen, E., Hamilton, J. D., Sorondo, S., Harrysson, O. L. A., Frank, M. C., & Rivero, I. V. (2022, July 10). Evaluating interlayer gaps in friction stir spot welds for rapid tooling applications. IISE TRANSACTIONS, Vol. 7. https://doi.org/10.1080/24725854.2022.2091184

Mariani, C. L., Zlotnick, J. A., Harrysson, O., Marcellin-Little, D. J., Malinak, K., Gavitt, A., & Guevar, J. (2021). Accuracy of three-dimensionally printed animal-specific drill guides for implant placement in canine thoracic vertebrae: A cadaveric study. VETERINARY SURGERY, 50(2), 294–302. https://doi.org/10.1111/vsu.13557

Hamilton, J. D., Ramesh, S., Harrysson, O. L. A., Rock, C. D., & Rivero, I. V. (2021). Cryogenic mechanical alloying of aluminum matrix composites for powder bed fusion additive manufacturing. JOURNAL OF COMPOSITE MATERIALS, 55(5), 641–651. https://doi.org/10.1177/0021998320957698

Altug-Peduk, G. S., Dilibal, S., Harrysson, O., & Ozbek, S. (2021). Experimental Investigation on the EBM-Based Additively Manufactured Prismatic Nickel-Titanium SMA Components. RUSSIAN JOURNAL OF NON-FERROUS METALS, 62(3), 357–367. https://doi.org/10.3103/S1067821221030020

Hauser, M., King, R., Wysk, R., & Harrysson, O. (2021). Resource planning for direct fabrication of customized orthopedic implants using EBM technology. JOURNAL OF MANUFACTURING SYSTEMS, 60, 500–511. https://doi.org/10.1016/j.jmsy.2021.07.003

Spearman, S. S., Irin, F., Ramesh, S., Rivero, I. V., Green, M. J., & Harrysson, O. L. A. (2019). Effect of pseudomonas lipase enzyme on the degradation of polycaprolactone/polycaprolactone-polyglycolide fiber blended nanocomposites. INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS, 68(7), 360–367. https://doi.org/10.1080/00914037.2018.1445633

Webster, C. E., Marcellin-Little, D. J., Koballa, E. M., Stallrich, J. W., & Harrysson, O. L. A. (2019). Evaluation of the geometric accuracy of computed tomography and microcomputed tomography of the articular surface of the distal portion of the radius of cats. AMERICAN JOURNAL OF VETERINARY RESEARCH, 80(10), 976–984. https://doi.org/10.2460/ajvr.80.10.976

Mahbooba, Z., Thorsson, L., Unosson, M., Skoglund, P., West, H., Horn, T., … Harrysson, O. (2018). Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness. APPLIED MATERIALS TODAY, 11, 264–269. https://doi.org/10.1016/j.apmt.2018.02.011

Seifi, M., Dahar, M., Aman, R., Harrysson, O., Beuth, J., & Lewandowski, J. J. (2018). Correction to: Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V. JOM, 70(3), 436–436. https://doi.org/10.1007/S11837-018-2736-0

Basinger, K. L., Keough, C. B., Webster, C. E., Wysk, R. A., Martin, T. M., & Harrysson, O. L. (2018). Development of a modular computer-aided process planning (CAPP) system for additive-subtractive hybrid manufacturing of pockets, holes, and flat surfaces. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 96(5-8), 2407–2420. https://doi.org/10.1007/s00170-018-1674-x

Ruppert, D. S., Harrysson, O. L. A., Marcellin-Little, D. J., Dahners, L. E., & Weinhold, P. S. (2018). Improved osseointegration with as-built electron beam melted textured implants and improved peri-implant bone volume with whole body vibration. MEDICAL ENGINEERING & PHYSICS, 58, 64–71. https://doi.org/10.1016/j.medengphy.2018.05.003

Mahbooba, Z., West, H., Harrysson, O., Wojcieszynski, A., Dehoff, R., Nandwana, P., & Horn, T. (2017). Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing. JOM, 69(3), 472–478. https://doi.org/10.1007/s11837-016-2210-9

Eldesouky, I., Harrysson, O., West, H., & Elhofy, H. (2017). Electron beam melted scaffolds for orthopedic applications. Additive Manufacturing, 17, 169–175. https://doi.org/10.1016/J.ADDMA.2017.08.005

Eldesouky, I., Harrysson, O., Marcellin-Little, D. J., West, H., & El-Hofy, H. (2017). Pre-clinical evaluation of the mechanical properties of a low-stiffness cement-injectable hip stem. Journal of Medical Engineering & Technology, 41(8), 681–691. https://doi.org/10.1080/03091902.2017.1394391

Smith, E. J., Marcellin-Little, D. J., Harrysson, O., & Griffith, E. H. (2017). Three-dimensional assessment of curvature, torsion, and canal flare index of the humerus of skeletally mature nonchondrodystrophic dogs. American Journal of Veterinary Research, 78(10), 1140–1149. https://doi.org/10.2460/ajvr.78.10.1140

Manogharan, G., Wysk, R. A., & Harrysson, O. L. A. (2016). Additive manufacturing-integrated hybrid manufacturing and subtractive processes: economic model and analysis. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 29(5), 473–488. https://doi.org/10.1080/0951192x.2015.1067920

Smith, E. J., Marcellin-Little, D. J., Harrysson, O. L. A., & Griffith, E. H. (2016). Influence of chondrodystrophy and brachycephaly on geometry of the humerus in dogs. VETERINARY AND COMPARATIVE ORTHOPAEDICS AND TRAUMATOLOGY, 29(3), 220–226. https://doi.org/10.3415/vcot-15-11-0181

Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016). Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM, 68(3), 747–764. https://doi.org/10.1007/s11837-015-1810-0

Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J. (2016, May). Overview of Materials Qualification Needs for Metal Additive Manufacturing (vol 68, pg 747, 2016). JOM, Vol. 68, pp. 1492–1492. https://doi.org/10.1007/s11837-016-1901-6

Shouche, S., Wysk, R. A., King, R., & Harrysson, O. (2016). Supply chain operations reference model for us based powder bed metal additive manufacturing processes. 2016 winter simulation conference (wsc), 1158–1169. https://doi.org/10.1109/wsc.2016.7822173

Algardh, J. K., Horn, T., West, H., Aman, R., Snis, A., Engqvist, H., … Harrysson, O. (2016). Thickness dependency of mechanical properties for thin-walled titanium parts manufactured by Electron Beam Melting (EBM) ®. Additive Manufacturing, 12, 45–50. https://doi.org/10.1016/J.ADDMA.2016.06.009

Manogharan, G., Wysk, R., Harrysson, O., & Aman, R. (2015). AIMS – A Metal Additive-hybrid Manufacturing System: System Architecture and Attributes. Procedia Manufacturing, 1, 273–286. https://doi.org/10.1016/J.PROMFG.2015.09.021

Manogharan, G., Wysk, R., Harrysson, O., & Aman, R. (2015). AIMS- a metal additive-hybrid manufacturing system: System architecture and attributes. 43rd North American Manufacturing Research Conference, NAMRC, 43, 273–286.

Yang, L., Harrysson, O., Cormier, D., West, H., Gong, H., & Stucker, B. (2015). Additive Manufacturing of Metal Cellular Structures: Design and Fabrication. JOM, 67(3), 608–615. https://doi.org/10.1007/s11837-015-1322-y

Harrysson, O. L. A., Marcellin-Little, D. J., & Horn, T. J. (2015). Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery. JOM, 67(3), 647–654. https://doi.org/10.1007/s11837-015-1295-x

Srinivasan, H., Harrysson, O. L. A., & Wysk, R. A. (2015). Automatic part localization in a CNC machine coordinate system by means of 3D scans. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 81(5-8), 1127–1138. https://doi.org/10.1007/s00170-015-7178-z

Seifi, M., Dahar, M., Aman, R., Harrysson, O., Beuth, J., & Lewandowski, J. J. (2015). Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V. JOM, 67(3), 597–607. https://doi.org/10.1007/s11837-015-1298-7

Yang, L., Harrysson, O. A., West, H. A., II, Cormier, D. R., Park, C., & Peters, K. (2015). Low-energy drop weight performance of cellular sandwich panels. RAPID PROTOTYPING JOURNAL, 21(4), 433–442. https://doi.org/10.1108/rpj-08-2013-0083

Hunsberger, J., Harrysson, O., Shirwaiker, R., Starly, B., Wysk, R., Cohen, P., … Atala, A. (2015). Manufacturing Road Map for Tissue Engineering and Regenerative Medicine Technologies. STEM CELLS TRANSLATIONAL MEDICINE, 4(2), 130–135. https://doi.org/10.5966/sctm.2014-0254

Yang, L., Harrysson, O., West, H., & Cormier, D. (2015). Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 69-70, 475–490. https://doi.org/10.1016/j.ijsolstr.2015.05.005

Rose, A. S., Kimbell, J. S., Webster, C. E., Harrysson, O. L. A., Formeister, E. J., & Buchman, C. A. (2015). Multi-material 3D Models for Temporal Bone Surgical Simulation. ANNALS OF OTOLOGY RHINOLOGY AND LARYNGOLOGY, 124(7), 528–536. https://doi.org/10.1177/0003489415570937

West, H., Harrysson, O., Horn, T., Cormier, D., Aman, R., & Marcellin-Little, D. (2015). Novel Materials and Structures Fabricated by Electron Beam Melting. Microscopy and Microanalysis, 21(S3), 461–462. https://doi.org/10.1017/S1431927615003104

Hasib, H., Harrysson, O. L. A., & West, H. A., II. (2015). Powder Removal from Ti-6Al-4V Cellular Structures Fabricated via Electron Beam Melting. JOM, 67(3), 639–646. https://doi.org/10.1007/s11837-015-1307-x

Rose, A. S., Webster, C. E., Harrysson, O. L. A., Formeister, E. J., Rawal, R. B., & Iseli, C. E. (2015). Pre-operative simulation of pediatric mastoid surgery with 3D-printed temporal bone models. INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY, 79(5), 740–744. https://doi.org/10.1016/j.ijporl.2015.03.004

Huang, H. Y. S., Huang, S. Y., Gettys, T., Prim, P. M., & Harrysson, O. L. (2014). A biomechanical study of directional mechanical properties of porcine skin tissues. Proceedings of the ASME International Mechanical Engineering Congress and Exposition, 2013, vol 9.

Gulledge, B. M., Marcellin-Little, D. J., Levine, D., Tillman, L., Harrysson, O. L. A., Osborne, J. A., & Baxter, B. (2014). Comparison of two stretching methods and optimization of stretching protocol for the piriformis muscle. Medical Engineering & Physics, 36(2), 212–218. https://doi.org/10.1016/j.medengphy.2013.10.016

Horn, T. J., Harrysson, O. L. A., West, H. A., II, Little, J. P., & Marcellin-Little, D. J. (2014). Development of a patient-specific bone analog for the biomechanical evaluation of custom implants. RAPID PROTOTYPING JOURNAL, 20(1), 41–49. https://doi.org/10.1108/rpj-08-2012-0069

Huang, H. Y. S., Huang, S. Y., Frazier, C. P., Prim, P. M., & Harrysson, O. (2014). Directional biomechanical properties of porcine skin tissue. Journal of Mechanics in Medicine and Biology, 14(5).

Frigola, P., Harrysson, O. A., Horn, T. J., West, H. A., Aman, R. L., Rigsbee, J. M., … Rodriguez, E. (2014). Fabricating copper components with electron beam melting. Advanced Materials & Processes, 172(7), 20–24.

Horn, T. J., Harrysson, O. L. A., Marcellin-Little, D. J., West, H. A., Lascelles, B. D. X., & Aman, R. (2014). Flexural properties of Ti6Al4V rhombic dodecahedron open cellular structures fabricated with electron beam melting. Additive Manufacturing, 1-4, 2–11. https://doi.org/10.1016/J.ADDMA.2014.05.001

Springer, J. C., Harrysson, O. L. A., Marcellin-Little, D. J., & Bernacki, S. H. (2014). In vitro dermal and epidermal cellular response to titanium alloy implants fabricated with electron beam melting. MEDICAL ENGINEERING & PHYSICS, 36(10), 1367–1372. https://doi.org/10.1016/j.medengphy.2014.07.004

Huang, H.-Y. S., Huang, S., Gettys, T. A., & Harrysson, O. (2013). A biomechanical study of directional mechanical properties of porcine skin tissues. ASME 2013 International Mechanical Engineering Congress & Exposition.

Yang, L., Harrysson, O., West, H., & Cormier, D. (2013). Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure. JOURNAL OF MATERIALS SCIENCE, 48(4), 1413–1422. https://doi.org/10.1007/s10853-012-6892-2

Yang, L., Harrysson, O., West, H., & Cormier, D. (2012). Compressive properties of Ti-6Al-4V auxetic mesh structures made by electron beam melting. ACTA MATERIALIA, 60(8), 3370–3379. https://doi.org/10.1016/j.actamat.2012.03.015

Little, J. P., Horn, T. J., Marcellin-Little, D. J., Harrysson, O. L. A., & West, H. A., II. (2012). Development and validation of a canine radius replica for mechanical testing of orthopedic implants. AMERICAN JOURNAL OF VETERINARY RESEARCH, 73(1), 27–33. https://doi.org/10.2460/ajvr.73.1.27

Kumar, V., Cormier, D., & Harrysson, O. (2012). Electrical conductivity of hexagonal periodic lattice structures. Virtual and Physical Prototyping, 7(1), 81–90. https://doi.org/10.1080/17452759.2012.668784

Yang, L., Cormier, D., West, H., Harrysson, O., & Knowlson, K. (2012). Non-stochastic Ti-6Al-4V foam structures with negative Poisson's ratio. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558, 579–585. https://doi.org/10.1016/j.msea.2012.08.053

Fitzwater, K. L., Marcellin-Little, D. J., Harrysson, O. L. A., Osborne, J. A., & Poindexter, E. C. (2011). Evaluation of the effect of computed tomography scan protocols and freeform fabrication methods on bone biomodel accuracy. AMERICAN JOURNAL OF VETERINARY RESEARCH, 72(9), 1178–1185. https://doi.org/10.2460/ajvr.72.9.1178

Haslauer, C. M., Springer, J. C., Harrysson, O. L. A., Loboa, E. G., Monteiro-Riviere, N. A., & Marcellin-Little, D. J. (2010). In vitro biocompatibility of titanium alloy discs made using direct metal fabrication. MEDICAL ENGINEERING & PHYSICS, 32(6), 645–652. https://doi.org/10.1016/j.medengphy.2010.04.003

Marcellin-Little, D. J., Cansizoglu, O., Harrysson, O. L. A., & Roe, S. C. (2010). In vitro evaluation of a low-modulus mesh canine prosthetic hip stem. AMERICAN JOURNAL OF VETERINARY RESEARCH, 71(9), 1089–1095. https://doi.org/10.2460/ajvr.71.9.1089

Cansizoglu, O., Harrysson, O. L. A., West, H. A., II, Cormier, D. R., & Mahale, T. (2008). Applications of structural optimization in direct metal fabrication. RAPID PROTOTYPING JOURNAL, 14(2), 114–122. https://doi.org/10.1108/13552540810862082

Harrysson, O. L. A., CansiZoglu, O., Marcellin-Little, D. J., Cormier, D. R., & West, H. A., II. (2008, April 1). Direct metal fabrication of titanium implants with tailored materials and mechanical properties using electron beam melting technology. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, Vol. 28, pp. 366–373. https://doi.org/10.1016/j.msec.2007.04.022

Marcellin-Little, D. J., Harrysson, O. L. A., & Cansizoglu, O. (2008). In vitro evaluation of a custom cutting jig and custom plate for canine tibial plateau leveling. AMERICAN JOURNAL OF VETERINARY RESEARCH, 69(7), 961–966. https://doi.org/10.2460/ajvr.69.7.961

Cansizoglu, O., Harrysson, O., Cormier, D., West, H., & Mahale, T. (2008). Properties of Ti-6Al-4V non-stochastic lattice structures fabricated via electron beam melting. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 492(1-2), 468–474. https://doi.org/10.1016/j.msea.2008.04.002

Liska, W. D., Marcellin-Little, D. J., Eskelinen, E. V., Sidebotham, C. G., Harrysson, O. L. A., & Hielm-Bjorkman, A. K. (2007, June). Custom total knee replacement in a dog with femoral condylar bone loss. VETERINARY SURGERY, Vol. 36, pp. 293–301. https://doi.org/10.1111/j.1532-950X.2007.00270.x

La Harrysson, O., Hosni, Y. A., & Nayfeh, J. F. (2007). Custom-designed orthopedic implants evaluated using finite element analysis of patient-specific computed tomography data: femoral-component case study. BMC MUSCULOSKELETAL DISORDERS, 8. https://doi.org/10.1186/1471-2474-8-91

Hildreth, B. E., Marcellin-Little, D. J., Roe, S. C., & Harrysson, O. L. A. (2006, April). In vitro evaluation of five canine tibial plateau leveling methods. AMERICAN JOURNAL OF VETERINARY RESEARCH, Vol. 67, pp. 693–700. https://doi.org/10.2460/ajvr.67.4.693

Osmond, C. S., Marcellin-Little, D. J., Harrysson, O. L. A., & Kidd, L. B. (2006). Morphometric assessment of the proximal portion of the tibia in dogs with and without cranial cruciate ligament rupture. VETERINARY RADIOLOGY & ULTRASOUND, 47(2), 136–141. https://doi.org/10.1111/j.1740-8261.2006.00119.x

Cormier, D., Harrysson, A., & West, H. (2004). Characterization of H13 steel produced via electron beam melting. RAPID PROTOTYPING JOURNAL, Vol. 10, pp. 35–41. https://doi.org/10.1108/13552540410512516

Harrysson, O. L. A., Robertsson, O., & Nayfeh, J. F. (2004). Higher cumulative revision rate of knee arthroplasties in younger patients with osteoarthritis. CLINICAL ORTHOPAEDICS AND RELATED RESEARCH, (421), 162–168. https://doi.org/10.1097/01.blo.0000127115.05754.ce

Harrysson, O. L. A., Cormier, D. R., Marcellin-Little, D. J., & Jajal, K. (2003). Rapid prototyping for treatment of canine limb deformities. RAPID PROTOTYPING JOURNAL, Vol. 9, pp. 37–42. https://doi.org/10.1108/13552540310455647