William Rasdorf

Bonilla, M., Rasdorf, W., Liu, M., Al-Ghandour, M., & He, C. (2023). Inequity Reduction in Road Maintenance Funding for Municipalities. PUBLIC WORKS MANAGEMENT & POLICY, 28(3), 339–362. https://doi.org/10.1177/1087724X221130047

Westbrook, M., & Rasdorf, W. (2023). LED Traffic Signal Repair and Replacement Practices. SUSTAINABILITY, 15(1). https://doi.org/10.3390/su15010808

Liu, Y., Han, K., & Rasdorf, W. (2022). Assessment and Prediction of Impact of Flight Configuration Factors on UAS-Based Photogrammetric Survey Accuracy. REMOTE SENSING, 14(16). https://doi.org/10.3390/rs14164119

Bonilla, M., Rasdorf, W., Liu, M., Al-Ghandour, M., & He, C. (2022, September 27). Inequity Reduction in Road Maintenance Funding for Municipalities. PUBLIC WORKS MANAGEMENT & POLICY, Vol. 9. https://doi.org/10.1177/I087724X221130047

Machado, P., & Rasdorf, W. (2020). Analysis of Three Sign Management Program Case Studies. PUBLIC WORKS MANAGEMENT & POLICY, 25(1), 51–74. https://doi.org/10.1177/1087724X19862285

Rasdorf, W., & Machado, P. (2020). Simulation-Based Analysis of Sign Blanket Replacement Strategies. TRANSPORTATION RESEARCH RECORD, 2674(1), 57–67. https://doi.org/10.1177/0361198119898110

Gabr, M. A., Rasdorf, W., Findley, D. J., Butler, C. J., & Bert, S. A. (2018, December). Closure to "Comparison of Three Retaining Wall Condition Assessment Rating Systems" by Mohammed A. Gabr, William Rasdorf, Daniel J. Findley, Cedrick J. Butler, and Steven A. Bert. JOURNAL OF INFRASTRUCTURE SYSTEMS, Vol. 24. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000447

Lewis, P., Karimi, B., Shan, Y., & Rasdorf, W. (2018). Comparing the economic, energy, and environmental impacts of biodiesel versus petroleum diesel fuel use in construction equipment. International Journal of Construction Education and Research, 15(4), 276–290. https://doi.org/10.1080/15578771.2018.1483982

Gabr, M. A., Rasdorf, W., Findley, D. J., Butler, C. J., & Bert, S. A. (2018). Comparison of Three Retaining Wall Condition Assessment Rating Systems. JOURNAL OF INFRASTRUCTURE SYSTEMS, 24(1). https://doi.org/10.1061/(asce)is.1943-555x.0000403

Rasdorf, W., & Almalki, A. (2018). Highway Asset Deterioration Rates. TRANSPORTATION RESEARCH RECORD, 2672(12), 179–186. https://doi.org/10.1177/0361198118781136

Yeom, C., Rasdorf, W., Rouphail, N., & Schroeder, B. (2018). Simulation of Work Zones with Lane Closures in Proximity of Freeway Interchanges. IEEE INTELLIGENT TRANSPORTATION SYSTEMS MAGAZINE, 10(3), 184–195. https://doi.org/10.1109/MITS.2018.2842027

Hummer, J. E., Arocho, I., & Rasdorf, W. (2017). Approach to Assessing Tradeoffs between Construction Equipment Fleet Emissions and Cost. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 143(5). https://doi.org/10.1061/(asce)co.1943-7862.0001255

Rasdorf, W., Machado, P., Hummer, J. E., Kaber, D., Zahabi, M., Lau, M., & Pankok, C. (2017). Driver Accuracy in Identifying Food and Attraction Targets on Business Logo Signs Impacts of Driver Age, Number of Panels, Logo Familiarity, and Logo Format. TRANSPORTATION RESEARCH RECORD, (2624), 9–17. https://doi.org/10.3141/2624-02

Zahabi, M., Machado, P., Lau, M. Y., Deng, Y., Pankok, C., Jr., Hummer, J., … Kaber, D. B. (2017). Driver performance and attention allocation in use of logo signs on freeway exit ramps. Applied Ergonomics, 65, 70–80. https://doi.org/10.1016/J.APERGO.2017.06.001

Yeom, C., Hajbabaie, A., Rouphail, N. M., Rasdorf, W., & Schroeder, B. J. (2017). Freeway work zone free-flow speed model development. ITE Journal, 87(11), 38–44.

Lewis, P., & Rasdorf, W. (2017). Fuel Use and Pollutant Emissions Taxonomy for Heavy Duty Diesel Construction Equipment. JOURNAL OF MANAGEMENT IN ENGINEERING, 33(2). https://doi.org/10.1061/(asce)me.1943-5479.0000484

Zahabi, M., Pankok, C., Jr., Kaber, D. B., Machado, P., Lau, M. Y., Hummer, J. E., & Rasdorf, W. (2017). On-Road Visual Sign Salience, Driver Attention Allocation, and Target Detection Accuracy. TRANSPORTATION RESEARCH RECORD, (2663), 40–47. https://doi.org/10.3141/2663-06

Zahabi, M., Machado, P., Pankok, C., Jr., Lau, M. Y., Liao, Y.-F., Hummer, J., … Kaber, D. B. (2017). The role of driver age in performance and attention allocation effects of roadway sign count, format and familiarity. Applied Ergonomics, 63, 17–30. https://doi.org/10.1016/J.APERGO.2017.04.001

Arocho, I., Rasdorf, W., Hummer, J., & Lewis, P. (2017). Time and cost characterisation of emissions from non-road diesel equipment for infrastructure projects. INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING, 10(2), 123–134. https://doi.org/10.1080/19397038.2016.1218569

Almalki, A., Rasdorf, W., Pilson, C., Arnold, J., & Whitley, M. (2016). An infrastructure maintenance funding framework for a transportation agency. Construction Research Congress 2016: Old and New Construction Technologies Converge in Historic San Juan, 1435–1444. https://doi.org/10.1061/9780784479827.144

Vereen, S. C., Rasdorf, W., & Hummer, J. E. (2016). Development and Comparative Analysis of Construction Industry Labor Productivity Metrics. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT, 142(7). https://doi.org/10.1061/(asce)co.1943-7862.0001112

Rasdorf, W., Butler, C. J., Findley, D. J., Gabr, M. A., & Bert, S. A. (2016). Framework for Defining Asset Features to Monitor and Assess Earth-Retaining Structures. TRANSPORTATION RESEARCH RECORD, 2579(2579), 8–16. https://doi.org/10.3141/2579-02

Butler, C. J., Gabr, M. A., Rasdorf, W., Findley, D. J., Chang, J. C., & Hammit, B. E. (2016). Retaining Wall Field Condition Inspection, Rating Analysis, and Condition Assessment. Journal of Performance of Constructed Facilities, 30(3). https://doi.org/10.1061/(asce)cf.1943-5509.0000785

Yeom, C., Rouphail, N. M., Rasdorf, W., & Schroeder, B. J. (2016). Simulation guidance for calibration of freeway lane closure capacity. Transportation Research Record, (2553), 82–89.

Kaber, D., Pankok, C., Jr., Corbett, B., Ma, W., Hummer, J., & Rasdorf, W. (2015). Driver behavior in use of guide and logo signs under distraction and complex roadway conditions. APPLIED ERGONOMICS, 47, 99–106. https://doi.org/10.1016/j.apergo.2014.09.005

Pankok, C., Jr., Kaber, D., Rasdorf, W., & Hummer, J. (2015). Effects of Guide and Logo Signs on Freeway Driving Behavior. TRANSPORTATION RESEARCH RECORD, (2518), 73–78. https://doi.org/10.3141/2518-10

Vereen, S., Hummer, J. E., & Rasdorf, W. (2014). Development of an Industry Level Productivity Metric for the Construction Industry. Construction Research Congress 2014. Presented at the Construction Research Congress 2014. https://doi.org/10.1061/9780784413517.082

Arocho, I., Rasdorf, W., & Hummer, J. (2014). Methodology to Forecast the Emissions from Construction Equipment for a Transportation Construction Project. Construction Research Congress 2014. Presented at the Construction Research Congress 2014. https://doi.org/10.1061/9780784413517.057

Findley, D. J., Hummer, J. E., Rasdorf, W., & Laton, B. T. (2013). Collecting Horizontal Curve Data: Mobile Asset Vehicles and Other Techniques. JOURNAL OF INFRASTRUCTURE SYSTEMS, 19(1), 74–84. https://doi.org/10.1061/(asce)is.1943-555x.0000107

Zhang, Y., Harris, E., Rogers, M., Kaber, D., Hummer, J., Rasdorf, W., & Hu, J. (2013). Driver distraction and performance effects of highway logo sign design. APPLIED ERGONOMICS, 44(3), 472–479. https://doi.org/10.1016/j.apergo.2012.10.009

Hollar, D. A., Rasdorf, W., Liu, M., Hummer, J. E., Arocho, I., & Hsiang, S. M. (2013). Preliminary Engineering Cost Estimation Model for Bridge Projects. Journal of Construction Engineering and Management, 139(9), 1259–1267. https://doi.org/10.1061/(asce)co.1943-7862.0000668

Liu, M., Rasdorf, W., Hummer, J. E., Hollar, D. A., & Parikh, S. C. (2013). Preliminary Engineering Cost-Estimation Strategy Assessment for Roadway Projects. Journal of Management in Engineering, 29(2), 150–157. https://doi.org/10.1061/(asce)me.1943-5479.0000137

Hummer, J. E., Harris, E. A., & Rasdorf, W. (2013). Simulation-Based Evaluation of Traffic Sign Retroreflectivity Maintenance Practices. JOURNAL OF TRANSPORTATION ENGINEERING-ASCE, 139(6), 556–564. https://doi.org/10.1061/(asce)te.1943-5436.0000526

Al-Ghandour, M., Schroeder, B., Rasdorf, W., & Williams, B. (2012). Delay analysis of single-lane roundabout with a slip lane under varying exit types, experimental balanced traffic volumes, and pedestrians, using microsimulation. Transportation Research Record, (2312), 76–85.

Harris, E. A., Rasdorf, W., & Hummer, J. E. (2012). Development of a Microscopic Simulation to Model Traffic Sign Management and Performance. JOURNAL OF COMPUTING IN CIVIL ENGINEERING, 26(2), 172–182. https://doi.org/10.1061/(asce)cp.1943-5487.0000126

Lewis, P., Rasdorf, W., Frey, H. C., & Leming, M. (2012). Effects of Engine Idling on National Ambient Air Quality Standards Criteria Pollutant Emissions from Nonroad Diesel Construction Equipment. TRANSPORTATION RESEARCH RECORD, (2270), 67–75. https://doi.org/10.3141/2270-09

Rasdorf, W., Findley, D. J., Zegeer, C. V., Sundstrom, C. A., & Hummer, J. E. (2012). Evaluation of GIS Applications for Horizontal Curve Data Collection. JOURNAL OF COMPUTING IN CIVIL ENGINEERING, 26(2), 191–203. https://doi.org/10.1061/(asce)cp.1943-5487.0000127

Rasdorf, W., Lewis, P., Marshall, S. K., Arocho, I., & Frey, H. C. (2012). Evaluation of On-Site Fuel Use and Emissions over the Duration of a Commercial Building Project. JOURNAL OF INFRASTRUCTURE SYSTEMS, 18(2), 119–129. https://doi.org/10.1061/(asce)is.1943-555x.0000071

Lewis, P., Leming, M., & Rasdorf, W. (2012). Impact of Engine Idling on Fuel Use and CO2 Emissions of Nonroad Diesel Construction Equipment. JOURNAL OF MANAGEMENT IN ENGINEERING, 28(1), 31–38. https://doi.org/10.1061/(asce)me.1943-5479.0000068

Marshall, S. K., Rasdorf, W., Lewis, P., & Frey, H. C. (2012). Methodology for Estimating Emissions Inventories for Commercial Building Projects. Journal of Architectural Engineering, 18(3), 251–260. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000073

Findley, D. J., Hummer, J. E., Rasdorf, W., Zegeer, C. V., & Fowler, T. J. (2012). Modeling the impact of spatial relationships on horizontal curve safety. Accident Analysis & Prevention, 45, 296–304. https://doi.org/10.1016/j.aap.2011.07.018

Liu, M., Rasdorf, W., Hollar, D. A., Hummer, J. E., & Parikh, S. C. (2012). Predicting the Preliminary Engineering Duration of Bridge Projects. Construction Research Congress 2012. Presented at the Construction Research Congress 2012, West Lafayette, Indiana. https://doi.org/10.1061/9780784412329.051

Al-Ghandour, M., Rasdorf, W., Williams, B., & Schroeder, B. (2011). Analysis of Single-Lane Roundabout Slip Lanes Using SIDRA. In I. L. Al-Qadi & S. Murrell (Eds.), Transportation and Development Institute Congress 2011 (pp. 1235–1244). https://doi.org/10.1061/41167(398)118

Lewis, P., Leming, M., Frey, H. C., & Rasdorf, W. (2011). Assessing Effects of Operational Efficiency on Pollutant Emissions of Nonroad Diesel Construction Equipment. TRANSPORTATION RESEARCH RECORD, (2233), 11–18. https://doi.org/10.3141/2233-02

Al-Ghandour, M. N., Schroeder, B. J., Williams, B. M., & Rasdorf, W. J. (2011). Conflict models for single-lane roundabout slip lanes from microsimulation development and validation. Transportation Research Record, (2236), 92–101.

Hummer, J. E., Rasdorf, W., & Zhang, G. (2011). Linear Mixed-Effects Models for Paint Pavement-Marking Retroreflectivity Data. JOURNAL OF TRANSPORTATION ENGINEERING, 137(10), 705–716. https://doi.org/10.1061/(asce)te.1943-5436.0000283

Hummer, J. E., Rasdorf, W., Findley, D. J., Zegeer, C. V., & Sundstrom, C. A. (2010). An examination of horizontal curve collisions characteristics and corresponding countermeasures. Proceedings of the Transportation Research Board 89th Annual Meeting. Washington, D.C. : Transportation Research Board.

Frey, H. C., Rasdorf, W., & Lewis, P. (2010). Comprehensive Field Study of Fuel Use and Emissions of Nonroad Diesel Construction Equipment. TRANSPORTATION RESEARCH RECORD, (2158), 69–76. https://doi.org/10.3141/2158-09

Hummer, J. E., Rasdorf, W., Findley, D., Zegeer, C. V., & Sundstrom, C. A. (2010). Curve collisions: Road and collision characteristics and countermeasures. Journal of Transportation Safety and Security, 2(3), 203–220. https://doi.org/10.1080/19439961003734880

Hollar, D., Arocho, I., Hummer, J., Liu, M., & Rasdorf, W. (2010). Development of a regression model to predict preliminary engineering costs. ITE 2010 Technical Conference and Exhibit compendium of technical papers. Washington, D.C. : Institute of Transportation Engineers.

Rasdorf, W., Lewis, P., & Frey, H. C. (2010). Estimating productivity-based fuel eifficiency and emissions factors of diesel construction equipment performing earthmoving activities. In N. M. B. Chimay J. Anumba, John Messner, & M. K. Parfitt (Eds.), Proceedings of the 6th International Conference on Innovation in Architecture, Engineering, and Construction. University Park, Pa. : Department of Architectural Engineering, Pennsylvania State University.

Rasdorf, W., Frey, C., Lewis, P., Kim, K., Pang, S.-H., & Abolhassani, S. (2010). Field Procedures for Real-World Measurements of Emissions from Diesel Construction Vehicles. JOURNAL OF INFRASTRUCTURE SYSTEMS, 16(3), 216–225. https://doi.org/10.1061/(asce)is.1943-555x.0000027

Zhang, G., Hummer, J. E., & Rasdorf, W. (2010). Impact of Bead Density on Paint Pavement Marking Retroreflectivity. JOURNAL OF TRANSPORTATION ENGINEERING, 136(8), 773–781. https://doi.org/10.1061/(asce)te.1943-5436.0000142

Rasdorf, W., Grasso, B., & Bridgers, M. (2010). Public versus private perceptions on hiring an external program manager. Journal of Construction Engineering and Management, 136(2), 219–226. https://doi.org/10.1061/(ASCE)0733-9364(2010)136:2(219)

Harris, E. A., Rasdorf, W., & Hummer, J. E. (2009). A Control Sign Facility Design to Meet the New FHWA Minimum Sign Retroreflectivity Standards. PUBLIC WORKS MANAGEMENT & POLICY, 14(2), 174–194. https://doi.org/10.1177/1087724x09350226

Cai, H., & Rasdorf, W. (2009). Accuracy Evaluation and Sensitivity Analysis of Estimating 3D Road Centerline Length using Lidar and NED. PHOTOGRAMMETRIC ENGINEERING AND REMOTE SENSING, 75(6), 657–665. https://doi.org/10.14358/PERS.75.6.657

Sitzabee, W. E., Rasdorf, W., Hummer, J. E., & Devine, H. A. (2009). Data integration of pavement markings: A case in transportation asset management. Journal of Computing in Civil Engineering, 23(5), 288–298. https://doi.org/10.1061/(ASCE)0887-3801(2009)23:5(288)

Lewis, P., Frey, H. C., & Rasdorf, W. (2009). Development and Use of Emissions Inventories for Construction Vehicles. TRANSPORTATION RESEARCH RECORD, (2123), 46–53. https://doi.org/10.3141/2123-06

Pradhan, A., & Rasdorf, W. (2009). GIS and LiDAR use for identification of potential road hazard locations. In W. J. O. B. Carlos H. Caldas (Ed.), Computing in civil engineering : proceedings of the 2009 ASCE International Workshop on Computing in Civil Engineering : June 24-27, 2009, Austin, Texas. https://doi.org/10.1061/41052(346)13

Rasdorf, W., Hummer, J. E., Harris, E. A., & Sitzabee, W. E. (2009). IT Issues for the management of high-quantity, low-cost assets. Journal of Computing in Civil Engineering, 23(2), 91–99. https://doi.org/10.1061/(asce)0887-3801(2009)23:2(91)

Pang, S.-H., Frey, H. C., & Rasdorf, W. J. (2009). Life Cycle Inventory Energy Consumption and Emissions for Biodiesel versus Petroleum Diesel Fueled Construction Vehicles. Environmental Science & Technology, 43(16), 6398–6405. https://doi.org/10.1021/es802916u

Pang, S. H., Frey, H. C., & Rasdorf, W. J. (2009). Life cycle inventory energy consumption and emissions for biodiesel versus petroleum diesel fueled construction vehicles. Environmental Science & Technology, 43(16), 6398–6405. https://doi.org/10.1021/os802916u

Sitzabee, W. E., Hummer, J. E., & Rasdorf, W. (2009). Pavement marking degradation modeling and analysis. Journal of Infrastructure Systems, 15(3), 190–199. https://doi.org/10.1061/(ASCE)1076-0342(2009)15:3(190)

Rasdorf, W., Hummer, J. E., Zhang, G., & Sitzabee, W. E. (2009). Pavement marking performance analysis. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  North Carolina Department of Transportation.

Lewis, P., Rasdorf, W., Frey, H. C., Pang, S.-H., & Kim, K. (2009). Requirements and Incentives for Reducing Construction Vehicle Emissions and Comparison of Nonroad Diesel Engine Emissions Data Sources. JOURNAL OF CONSTRUCTION ENGINEERING AND MANAGEMENT-ASCE, 135(5), 341–351. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000008

Immaneni, V. P. K., Hummer, J. E., Rasdorf, W. J., Harris, E. A., & Yeom, C. (2009). Synthesis of sign deterioration rates across the United States. Journal of Transportation Engineering, 135(3), 94–103. https://doi.org/10.1061/(ASCE)0733-947X(2009)135:3(94)

Rasdorf, W. J., Zhang, G., & Hummer, J. E. (2009). The Impact of Directionality on Paint Pavement Marking Retroreflectivity. PUBLIC WORKS MANAGEMENT & POLICY, 13(3), 265–277. https://doi.org/10.1177/1087724x08330824

Frey, H. C., Kim, K., Pang, S.-H., Rasdorf, W. J., & Lewis, P. (2008). Characterization of Real-World Activity, Fuel Use, and Emissions for Selected Motor Graders Fueled with Petroleum Diesel and B20 Biodiesel. JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 58(10), 1274–1287. https://doi.org/10.3155/1047-3289.58.10.1274

Frey, H. C., Rasdorf, W., Kim, K., Pang, G.-hao, & Lewis, P. (2008). Comparison of Real-World Emissions of B20 Biodiesel Versus Petroleum Diesel for Selected Nonroad Vehicles and Engine Tiers. TRANSPORTATION RESEARCH RECORD, (2058), 33–42. https://doi.org/10.3141/2058-05

Cai, H., & Rasdorf, W. (2008). Modeling road centerlines and predicting lengths in 3-D using LIDAR point cloud and planimetric road centerline data. COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, 23(3), 157–173. https://doi.org/10.1111/j.1467-8667.2008.00518.x

Grasso, B., Rasdorf, W., & Bridgers, M. (2008). Nature and extent of domestic construction program outsourcing. Journal of Construction Engineering and Management, 134(12), 1002–1010. https://doi.org/10.1061/(ASCE)0733-9364(2008)134:12(1002)

Harris, E., Rasdorf, W., & Hummer, J. E. (2008). New standards, new signs: Determining sign performance under controlled conditions. IMSA Journal, 46(1), 44–55.

Adeli, H., & Rasdorf, W. (2008). On professional standards of publication in peer-reviewed research journals. Journal of Computing in Civil Engineering, 22(1), 1–2. https://doi.org/10.1061/(asce)0887-3801(2008)22:1(1)

Frey, H. C., Rasdorf, W., Kim, K., Pang, S.-H., Lewis, P., & Abolhassani, S. (2008). Real-world duty cycles and utilization for construction equipment in North Carolina. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  North Carolina Department of Transportation.

Abolhasani, S., Frey, H. C., Kim, K., Rasdorf, W., Lewis, P., & Pang, S.-H. (2008). Real-world in-use activity, fuel use, and emissions for nonroad construction vehicles: A case study for excavators. JOURNAL OF THE AIR & WASTE MANAGEMENT ASSOCIATION, 58(8), 1033–1046. https://doi.org/10.3155/1047-3289.58.8.1033

Harris, E. A., Rasdorf, W., Hummer, J. E., & Yeom, C. (2007). Analysis of traffic sign asset management scenarios. TRANSPORTATION RESEARCH RECORD, (1993), 9–15. https://doi.org/10.3141/1993-02

Cai, H., Rasdorf, W., & Tilley, C. (2007). Approach to determine extent and depth of highway flooding. Journal of Infrastructure Systems, 13(2), 157–167. https://doi.org/10.1061/(asce)1076-0342(2007)13:2(157)

Immaneni, V. P. K., Rasdorf, W. J., Hummer, J. E., & Yeom, C. (2007). FIELD INVESTIGATION OF HIGHWAY SIGN DAMAGE RATES AND INSPECTOR ACCURACY. PUBLIC WORKS MANAGEMENT & POLICY, 11(4), 266–278. https://doi.org/10.1177/1087724x07299882

Rasdorf, W., Hummer, J., & Harris, E. (2007). IT infrastructure problems for asset management. In B. A. L. Soibelman & H. Shon (Eds.), Computing in civil engineering: Proceedings of the 2007 ASCE International Workshop on Computing in Civil Engineering, July 24-27, 2007, Pittsburgh, Pennsylvania. https://doi.org/10.1061/40937(261)10

Pradhan, A. R., Laefer, D. F., & Rasdorf, W. J. (2007). Infrastructure management information system framework requirements for disasters. Journal of Computing in Civil Engineering, 21(2), 90–101. https://doi.org/10.1061/(ASCE)0887-3801(2007)21:2(90)

Frey, H. C., Rasdorf, W., Kim, K., Pang, S.-H., Lewis, P., & Abolhassani, S. (2007). Life cycle inventory and impact analysis framework for nonroad construction vehicles and equipment based upon in-use measurements. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  National Science Foundation.

Frey, H. C., Rasdorf, W., Pang, S. H., Kim, K., Abolhasani, S., & Lewis, P. (2007). Methodology for activity, fuel use, and emissions data collection and analysis for nonroad construction equipment. Proceedings of the Air and Waste Management Association Annual Conference. Pittsburgh, PA: AWMA.

Frey, H. C., Rasdorf, W., Pang, S., Kim, K., & Lewis, P. (2007). Methods for measurement and analysis of in-use emissions of nonroad construction equipment. Proceedings of the EPA Emissions Inventory Conference. Raleigh, NC: EPA.

Craig, W. N., III, Sitzabee, W. E., Rasdorf, W. J., & Hummer, J. E. (2007). STATISTICAL VALIDATION OF THE EFFECT OF LATERAL LINE LOCATION ON PAVEMENT MARKING RETROREFLECTIVITY DEGRADATION. PUBLIC WORKS MANAGEMENT & POLICY, 12(2), 431–450. https://doi.org/10.1177/1087724x07308773

Taylor, K., Rasdorf, W., & Wikoff, L. (2006). An LRS based information system design for traffic survey data. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  North Carolina Department of Transportation.

Rasdorf, W., Hummer, J., Harris, E., Immaneni, V., & Yeom, C. (2006). Designing a nighttime sign inspection procedure to ensure motorist safety. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  North Carolina Department of Transportation.

Hummer, J., Rasdorf, W., & Harris, E. (2006). Designing an experimental facility for roadway sign retroreflectivity measurement. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  Department of Civil Engineering, North Carolina State University.

Cai, H. B., Rasdorf, W., Tilley, C., Smith, L. C., & Robson, F. (2006). Geographic information systems/national elevation data route mileage verification. Journal of Surveying Engineering, 132(1), 40–49. https://doi.org/10.1061/(ASCE)0733-9453(2006)132:1(40)

Rasdorf, W. (2006). Pavement markings research plan. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  North Carolina Department of Transportation.

Rasdorf, W. J. (2006). Publication changes, journal content, and the editorial board. Journal of Computing in Civil Engineering, 19(1), 1. https://doi.org/10.1061/(asce)0887-3801(2006)20:1(1)

Abudayyeh, O., Dibert-Deyoung, A., Rasdorf, W., & Melhem, H. (2006). Research publication trends and topics in computing in civil engineering. Journal of Computing in Civil Engineering, 20(1), 2–12. https://doi.org/10.1061/(asce)0887-3801(2006)20:1(2)

Cox, H., Farley, J., Norris, T., Rasdorf, W., Smith, L. C., & Tilley, C. (2006). Specifying road length. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  GIS Unit, North Carolina Department of Transportation.

Laefer, D., Rasdorf, W., & Pradhan, A. R. (2006). Tools and techniques for the technological integration of multi-jazard post-incident assessment. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  Department of Civil Engineering, North Carolina State University.

Kuriatnyk, A., & Rasdorf, W. (2005). Application and assessment of hansen software for naval material management. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  Department of Civil Engineering, North Carolina State University.

Harris, E. A., Rasdorf, W., & Laefer, D. (2005). Determining disaster data management needs in a multi-disaster context. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  Department of Civil Engineering, North Carolina State University.

Rasdorf, W., Hummer, J., Vereen, S., & Cai, H. (2005). Quantitative evaluation of the nighttime visual inspection method of sign evaluation. Journal of the Transportation Research Forum, 14(1), 121–139.

Kiel, D., Rasdorf W., S., E., & Poole, R. (2004). A linear referencing system for NCDOT. Computer-Aided Civil and Infrastructure Engineering, 19(3), 170–185.

Rasdorf, W., Cai, H., Tilley, C., Brun, S., & Robson, F. (2004). Accuracy assessment of interstate highway length using digital elevation model. Journal of Surveying Engineering, 130(3), 142–150. https://doi.org/10.1061/(ASCE)0733-9453(2004)130:3(142)

Vereen, S., Hummer, J., & Rasdorf, W. (2004). Alternative approaches for state agencies to address the proposed minimum retroreflectivity standards. Public Works Management & Policy, 8(4), 235–248. https://doi.org/10.1177/1087724x04263208

Cox, H., & Rasdorf, W. (2004). An overview of the business operations process for road inventory data. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Abudayyeh, O., Cai, H. B., Fenves, S. J., Law, K., O'Neill, R., & Rasdorf, W. (2004). Assessment of the computing component of civil engineering education. Journal of Computing in Civil Engineering, 18(3), 187–195. https://doi.org/10.1061/(ASCE)0887-3801(2004)18:3(187)

Rasdorf, W. (2004). Business process analysis of the city of Raleigh public utilities water warehouse. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina State University.

Karimi, H. A., Durcik, M., & Rasdorf, W. (2004). Evaluation of uncertainties associated with geocoding techniques. COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING, 19(3), 170–185. https://doi.org/10.1111/j.1467-8667.2004.00346.x

Wikoff, L., Rasdorf, W. P., L., & Taylor, K. (2003). Business and data process reengineering for traffic volume data. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Rasdorf, W., & Tiyasiritanon, W. (2003). Evaluation of spatial measurement technologies. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Cai, H., & Rasdorf, W. (2003). Identification of flooded road segments using LIDAR elevation data and 3-D road data. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Rasdorf, W. (2003). LRS project deliverables, products, and services. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Abudayyeh, O., Cai, H., Fenves, S. J., Law, K., O'Neill, R., & Rasdorf, W. (2003). Role of computing in civil engineering: Educators' perspective. Towards a vision for information technology in civil engineering: Proceedings of the Fourth Joint International Symposium on Technology in Civil Engineering, Nov. 15-16, 2003, Nashville, TN. https://doi.org/10.1061/40704(2003)5

Abudayyeh, O., Cai, H., Fenves, S. J., Law, K., O'Neill, R., & Rasdorf, W. (2003). Role of computing in civil engineering: Practitioners' perspective. Towards a vision for information technology in civil engineering: Proceedings of the Fourth Joint International Symposium on Technology in Civil Engineering, Nov. 15-16, 2003, Nashville, TN. Nashville, TN: American Society of Civil Engineers.

Fenves, S. J., & Rasdorf, W. J. (2003). The role of ASCE in the emergence of computing in civil engineering. In Perspectives in civil engineering: Commemorating the 150th anniversary of the American Society of Civil Engineers (pp. 219–227). Reston, VA: ASCE Press.

Rasdorf, W., Cai, H., Tilley, C., Brun, S., Karimi, H., & Robson, F. (2003). Transportation distance measurement data quality. Journal of Computing in Civil Engineering, 17(2), 75–87. https://doi.org/10.1061/(ASCE)0887-3801(2003)17:2(75)

Vereen, S., Hummer, J. E., & Rasdorf, W. (2002). A sign inventory study to assess and control liability and cost. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Rasdorf, W., Taylor, K., Wikoff, L., Robson, F., Jerman, D., & Smith, L. C. (2002). An interoperable information system design for traffic survey data. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Raleigh, N.C.: Department of Civil Engineering, North Carolina State University. (2002). Sign count approximation using field inventory sampling and calculated sign densities: Analysis, improvements, and methods. In Technical Report- Not held in TRLN member libraries.

Rasdorf, W., Janisch, A., Robson, F., & Tilley, C. (2002). Testing and evaluating alternative algorithms for location referencing system route generation. Journal of Computing in Civil Engineering, 16(3), 194–221. https://doi.org/10.1061/(ASCE)0887-3801(2002)16:3(194)

Rasdorf, W., & Cai, H. (2001). A GIS data quality case study: Accuracy comparison of length measurements using GIS/NED and DMI. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf W., T., & Wikoff, L. (2001). A data warehouse digital archiving case study at the North Carolina Department of Transportation (Paper 01-0119). Proceedings of the 2001 TRB Annual Meeting. https://doi.org/10.3141/1769-09

Rasdorf, W. (2001). Comparison of alternative linear referencing system route generation approaches. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Fenves, S. J., & Rasdorf, W. J. (2001). Role of ASCE in the advancement of computing in civil engineering. Journal of Computing in Civil Engineering, 15(4), 239–247. https://doi.org/10.1061/(ASCE)0887-3801(2001)15:4(239)

Kirtley, N. R., & Rasdorf, W. (2001). Sign count approximation using field inventory sampling and calculated sign densities for NC primary routes. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Smith, L. C., Tran, D., & Rasdorf, W. (2001). The Universe Database Schema. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Rasdorf, W., Janisch, A., Robson, F., Tilley, C., Hamm, A., & Opperman, M. (2000). Generating a base linear referencing system for roads and highways. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Rasdorf, W., Shuller, E., Poole, R., Abudayyeh, O., & Robson, F. (2000). Information management at state highway departments: Issues and needs. Journal of Transportation Engineering, 126(2), 134–142. https://doi.org/10.1061/(ASCE)0733-947X(2000)126:2(134)

Rasdorf, W. (2000). Spatial data quality. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. (1999). A spatial and attribute database schema design for traffic survey data. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Rasdorf, W. (1999). The Conceptual Universe database schema: Design issues and decisions. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Rasdorf, W. (1998). A digital information storage study at NCDOT. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Lakmazaheri, S., & Rasdorf, W. J. (1998). Foundation for research in computing in civil engineering. Journal of Computing in Civil Engineering, 12(1), 9–18. https://doi.org/10.1061/(ASCE)0887-3801(1998)12:1(9)

Rasdorf, W. (1998). Projecting future electronic storage requirements within the client/server. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Rasdorf, W. (1998). Research experiences for undergraduates in civil engineering at North Carolina State University. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Sherk, S. A., & Rasdorf, W. (1998). Unified database schema for North Carolina Department of Transportation. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: North Carolina Department of Transportation.

Spainhour, L. K., & Rasdorf, W. J. (1997). Development of an information model for composites design data. ENGINEERING WITH COMPUTERS, 13(1), 48–64. https://doi.org/10.1007/BF01201860

Rasdorf, W. J. (1997). Importance of mentoring in civil engineering education. Journal of Professional Issues in Engineering Education and Practice, 123(1), 5.

Rasdorf, W. (1997). Journal of Computing in Civil Engineering: Editorials. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Lakmazaheri, S., & Rasdorf, W. J. (1996). A review and assessment of the Journal of Computing in Civil Engineering. Journal of Computing in Civil Engineering, 10(2), 95–96.

Spainhour, L. K., & Rasdorf, W. J. (1996). Entity-relationship modeling of composite materials data. Journal of Computing in Civil Engineering, 10(3), 226–235. https://doi.org/10.1061/(asce)0887-3801(1996)10:3(226)

Rasdorf, W., & Janisch, A. J. (1996). Improved guidelines and models for traditional advising of undergraduate students. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W., & Janisch, A. J. (1996). Pilot study for improving undergraduate advising: Summary and analysis. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Spainhour, L. K., Rasdorf, W. J., & Alberts, J. M. (1995). Advanced composite material property data for engineering analysis and design. In C. P. Sturrock & E. F. Begley (Eds.), Computerization and networking of materials databases. Fourth volume (pp. 110–126). https://doi.org/10.1520/stp15408s

Lakmazaheri, S., & Rasdorf, W. (1995). Contents Review of the Journal of Computing in Civil Engineering. In Technical Report- Not held in TRLN member libraries. Reston, Va.:  American Society of Civil Engineers.

Spainhour, L. K., & Rasdorf, W. J. (1995). Suitability of ER method for composite materials data. Computing in civil engineering: Proceedings of the Second Congress held in conjunction with A/E/C Systems '95, 1598–1605. Atlanta, GA: American Society of Civil Engineers.

GLASS, A., HOLTZ, N., & RASDORF, W. J. (1994). A SYSTEM FOR DESCRIBING DESIGN ARTIFACTS USING THE KNOWLEDGE REPRESENTATION TECHNIQUE OF FRAMES. ENGINEERING WITH COMPUTERS, 10(4), 197–211. https://doi.org/10.1007/BF01202366

RASDORF, W. J. (1994). COMPOSITE-MATERIALS DESIGN DATABASE AND DATA-RETRIEVAL SYSTEM REQUIREMENTS. JOURNAL OF MECHANICAL DESIGN, 116(2), 531–538. https://doi.org/10.1115/1.2919411

DASTOOR, P. H., HERSH, S. P., BATRA, S. K., & RASDORF, W. J. (1994). COMPUTER-ASSISTED STRUCTURAL DESIGN OF INDUSTRIAL WOVEN FABRICS .1. NEED, SCOPE, BACKGROUND, AND SYSTEM ARCHITECTURE. JOURNAL OF THE TEXTILE INSTITUTE, 85(2), 89–109. https://doi.org/10.1080/00405009408659014

DASTOOR, P. H., HERSH, S. P., BATRA, S. K., & RASDORF, W. J. (1994). COMPUTER-ASSISTED STRUCTURAL DESIGN OF INDUSTRIAL WOVEN FABRICS .2. SYSTEM OPERATION, HEURISTIC DESIGN. JOURNAL OF THE TEXTILE INSTITUTE, 85(2), 110–134. https://doi.org/10.1080/00405009408659015

Rasdorf, W., & Wyatt, K. L. (1994). Mentoring: A planning sensitive approach to advising. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. (1994). Undergraduate student mentoring guidelines for faculty. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

RASDORF, W. J., SPAINHOUR, L. K., PATTON, E. M., & BURNS, B. P. (1993). A DESIGN ENVIRONMENT FOR LAMINATED FIBER-REINFORCED THICK COMPOSITE-MATERIALS. ENGINEERING WITH COMPUTERS, 9(1), 36–48. https://doi.org/10.1007/BF01198252

Spainhour, L. K., & Rasdorf, W. J. (1993). A constraint-based composites design advisor. Proceedings of the Fifth International Conference on Computing in Civil Engineering, 773–780. Anaheim, CA: American Society of Civil Engineers.

RASDORF, W. J., SPAINHOUR, L. K., PATTON, E. M., & BURNS, B. P. (1993). CDI - LINKING MATERIAL PROPERTY DATABASES TO ANALYSIS CODES. ADVANCES IN ENGINEERING SOFTWARE, 16(3), 145–152. https://doi.org/10.1016/0965-9978(93)90011-H

Alberts, J. M., Spainhour, L. K., & Rasdorf, W. (1993). Categorization and modeling of composite material test data for a conceptual database. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J., & Spainhour, L. K. (1993). Developing and implementing a conceptual composite materials design database. Engineering data management: Key to success in a global market: Proceedings of the 1993 ASME International Computers in Engineering Conference and Exposition, August 8-12, San Diego, California. San Diego, CA: American Society of Mechanical Engineers.

Wyatt, T. R., Holtz, N. M., & Rasdorf, W. J. (1993). Developing design solutions using the frames technique of knowledge representation. Engineering data management: Key to success in a global market: Proceedings of the 1993 ASME International Computers in Engineering Conference and Exposition, August 8-12, San Diego, California. San Diego, CA: American Society of Mechanical Engineers.

Abudayyeh, O. Y., & Rasdorf, W. J. (1993). Prototype integrated cost and schedule control system. Journal of Computing in Civil Engineering, 7(2), 181–198. https://doi.org/10.1061/(asce)0887-3801(1993)7:2(181)

RASDORF, W. J., & ABUDAYYEH, O. Y. (1992). A FORMAL APPROACH TO SCHEMA DESIGN FOR ENGINEERING DATABASES. ADVANCES IN ENGINEERING SOFTWARE, 14(1), 23–31. https://doi.org/10.1016/0965-9978(92)90080-Y

Rasdorf, W. J., Spainhour, L. K., & Burns, B. P. (1992). A database design methodology for fiber reinforced composites. Engineering data management: Key to integrated product development: Proceedings of the 1992 ASME International Computers in Engineering Conference and Exposition, August 2-6, San Francisco, California. San Francisco, CA: American Society of Mechanical Engineers.

LAKMAZAHERI, S., & RASDORF, W. J. (1992). AN ARTIFACT MODELING APPROACH FOR DEVELOPING INTEGRATED ENGINEERING SYSTEMS. BUILDING AND ENVIRONMENT, 27(2), 209–220. https://doi.org/10.1016/0360-1323(92)90023-I

Heroux, J. P., Peters, D. J., Rasdorf, W. J., & Baugh, J. W. (1992). An agenda for AEC PDES research. Computing in civil engineering: Proceedings of the Eighth Conference on Computing in Civil Engineering, 376–385. Dallas, TX: American Society of Civil Engineers.

Rasdorf, W. J., & Abudayyeh, O. Y. (1992). NIAM conceptual data-base design in construction management. Journal of Computing in Civil Engineering, 6(1), 41–62. https://doi.org/10.1061/(asce)0887-3801(1992)6:1(41)

Spainhour, L. K., & Rasdorf, W. (1991). A computer-aided analysis system for fiber-reinforced composite materials. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Spainhour, L. K., Rasdorf, W. J., Patton, E. M., Burns, B. P., & Collier, C. S. (1991). A computer-aided analysis system with DBMS support for fiber-reinforced thick composite materials. Engineering databases, an enterprise resource: Proceedings of the 1991 ASME International Computers in Engineering Conference and Exposition, August 18-22, Santa Clara, California. Santa Clara, CA: American Society of Mechanical Engineers.

Rasdorf, W. J., Abudayyeh, O. Y., & Wyatt, T. R. (1991). A formal approach to modeling construction data. Computing in civil engineering and Symposium on Data Bases: Proceedings of the seventh conference, held in conjunction with A/E/C Systems '91, Ramada Renaissance, Washington, D.C., May 6-8, 1991, 650–661. Washington, DC: American Society of Civil Engineers.

Rasdorf, W., & Lakmazaheri, S. (1991). A logic-based approach for processing design standards. International Journal of Artificial Intelligence in Engineering Design, Analysis and Manufacturing, 4(3), 179–192. https://doi.org/10.1017/s0890060400002377

Abudayyeh, O. Y., & Rasdorf, W. (1991). An Assessment of Cost and Schedule Control Integration Models. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  Department of Civil Engineering, North Carolina State University.

Abudayyeh, O. Y., & Rasdorf, W. (1991). An automated data acquisition and data storage model for improving cost and schedule control. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Computing in civil engineering and Symposium on Data Bases: Proceedings of the seventh conference, held in conjunction with A/E/C Systems '91, Ramada Renaissance, Washington, D.C., May 6-8, 1991. (1991). New York, NY: American Society of Civil Engineers.

Rasdorf, W., & Abudayyeh, O. Y. (1991). Cost- and schedule-control integration: Issues and needs. Journal of Construction Engineering and Management, 117(3), 486–502. https://doi.org/10.1061/(asce)0733-9364(1991)117:3(486)

Rasdorf, W. J., Spainhour, L. K., Patton, E. M., & Burns, B. P. (1991). DBMS support for fiber-reinforced composite materials analysis. Computing in civil engineering and Symposium on Data Bases: Proceedings of the seventh conference, held in conjunction with A/E/C Systems '91, Ramada Renaissance, Washington, D.C., May 6-8, 1991, 609–619. Washington, DC: American Society of Civil Engineers.

Peters, D. J., Heroux, J. P., Rasdorf, W., & Baugh, J. W. (1991). Enhanced data exchange through AEC modeling. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Abudayyeh, O. Y., & Rasdorf, W. J. (1991). Integrated cost and schedule control automation. Preparing for construction in the 21st century: Proceedings of Construction Congress '91, 679–686. New York, NY: American Society of Civil Engineers.

Davis, W. B., Rasdorf, W., & Bogetti, T. (1991). Structural performance characteristics of graphite reinforced composite laminates subjected to in-plane loading. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Abudayyeh, O. Y., & Rasdorf, W. (1991). The design of construction industry information management systems. Journal of Construction Engineering and Management, 117(4), 698–715. https://doi.org/10.1061/(ASCE)0733-9364(1991)117:4(698)

Stone, T. A., & Rasdorf, W. (1991). Viability of the PDES shipbuilding model in aerospace applications. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Lakmazaheri, S., & Rasdorf, W. (1990). A formal approach to structural design using predicate logic. Proceedings of the First International Workshop on Formal Methods in Engineering Design, Manufacturing, and Assembly, 247–259. Colorado Springs, CO: ASME.

Rasdorf, W. J., Fulton, R. E., & Khedro, T. (1990). A historical summary of the ASME Symposia on Engineering Database Management. Computers in engineering, 1990: Proceedings of the 1990 ASME International Computers in Engineering Conference and Exposition, August 5-9, Boston, Massachusetts. New York, NY: American Society of Mechanical Engineers.

Rasdorf, W. J., Lakmazaheri, S., & Abudayyeh, O. Y. (1990). A supervisory system for CAD/CAM of custom orthopedic footwear and its prototype implementation. Computers in engineering, 1990: Proceedings of the 1990 ASME International Computers in Engineering Conference and Exposition, August 5-9, Boston, Massachusetts. New York, NY: American Society of Mechanical Engineers.

Abudayyeh, O. Y., & Rasdorf, W. (1990). An overview of data acquisition technologies. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J., & Herbert, M. J. (1990). Automated identification systems-focus on bar coding. Journal of Computing in Civil Engineering, 4(3), 279–296. https://doi.org/10.1061/(asce)0887-3801(1990)4:3(279)

Rasdorf, W., & Herbert, M. J. (1990). Bar coding in construction engineering. Journal of Construction Engineering and Management, 116(2), 261–280. https://doi.org/10.1061/(asce)0733-9364(1990)116:2(261)

Ulberg, K. J., & Rasdorf, W. (1990). Computer-Aided Software Engineering Via Constraint Propagation. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  National Science Foundation.

Law, K. H., Rasdorf, W., Karamouz, M., & Abudayyeh, O. Y. (1990). Computing in the civil engineering curriculum: Needs and issues. Journal of Professional Issues in Engineering, 116(2), 128–141. https://doi.org/10.1061/(asce)1052-3928(1990)116:2(128)

Rasdorf, W. J., & Lakmazaheri, S. (1990). Logic-based approach for modeling organization of design standards. Journal of Computing in Civil Engineering, 4(2), 102–123. https://doi.org/10.1061/(asce)0887-3801(1990)4:2(102)

Proceedings of the Symposium on Engineering Database Management: The technology for integration. (1990). New York, NY: American Society of Civil Engineers.

LAKMAZAHERI, S., & RASDORF, W. J. (1990). THE ANALYSIS AND PARTIAL SYNTHESIS OF TRUSS STRUCTURES VIA THEOREM-PROVING. ENGINEERING WITH COMPUTERS, 6(1), 31–45. https://doi.org/10.1007/bf01200202

RASDORF, W. J., LAKMAZAHERI, S., & ABUDAYYEH, O. (1990). THE DEVELOPMENT OF A GEOMETRIC MODELING DATABASE-MANAGEMENT INTERFACE. ADVANCES IN ENGINEERING SOFTWARE AND WORKSTATIONS, 12(2), 84–89. https://doi.org/10.1016/0141-1195(90)90022-X

Law, K. H., Rasdorf, W., Karamouz, M., & Abudayyeh, O. Y. (1990). The role of computing in the civil engineering curriculum. Proceedings of the ASCE 1990 National Forum on Education and Continuing Professional Development for the Civil Engineer, 337–343. Las Vegas, NV: ASCE.

Lakmazaheri, S., & Rasdorf, W. J. (1989). A formal approach to structural design automation using predicate logic. Design theory and methodology, DTM '89: Presented at the 1989 ASME Design Technical Conferences, 1st International Conference on Design Theory and Methodology, Montreal, Quebec, Canada, September 17-21, 1989, 259–266. Chicago, IL: American Society of Mechanical Engineers.

Yacout, A. M., Turinsky, P. J., Al-Chalabi, R., & Rasdorf, W. J. (1989). A nuclear power plant operator aid utilizing on-line simulation models. Proceedings of the Topical Meeting on America Nuclear Society's Advances in Nuclear Engineering Computation and Radiation Shielding, Eldorado Hotel, Santa Fe, New Mexico, April 9-13, 1989. Santa Fe, NM: American Nuclear Society.

Rasdorf, W., & Herbert, M. J. (1989). Bar Codes on the Job Site. ID Systems, 32–36.

Rasdorf, W. J., & Herbert, M. J. (1989). Bar codes in construction management. Proceedings of the ID EXPO Conference and Exhibition, 110/1–1108. Los Angeles, CA: ID Systems Magazine.

Lakmazaheri, S., & Rasdorf, W. (1989). Constraint logic programming for the analysis and partial synthesis of truss structures. Engineering With Computers, 3(3), 157–173. https://doi.org/10.1017/s0890060400001207

Rasdorf, W., Lakmazaheri, S., & Abudayyeh, O. Y. (1989). Engineering specification and system design for CAD/CAM of custom shoes - Data representation and system integration. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W., Lakmazaheri, S., & Abudayyeh, O. Y. (1989). Engineering specification and system design for CAD/CAM of custom shoes - Supervisory system development. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Proceedings of the Symposium on Engineering Database Management: Leadership key for the 90's. (1989). New York, NY: American Society of Civil Engineers.

Law, K. H., Rasdorf, W. J., Karamouz, M., & Abudayyeh, O. Y. (1989). The role of computing in civil engineering education. Computing in civil engineering: Proceedings of the Sixth Conference on Computing in Civil Engineering, 442–450. Atlanta, GA: American Society of Civil Engineers.

Rasdorf, W. J., Abudayyeh, O. Y., & Lakmazaheri, S. (1989). The structure of an interface linking NASCAD and RIM. Engineering database management: Leadership key for the 90's, presented at the 1989 International Computers in Engineering Conference and Exposition, July 30-August 3, 1989, Anaheim, California. Anaheim, CA: American Society of Mechanical Engineers.

HOLTZ, N. M., & RASDORF, W. J. (1988). AN EVALUATION OF PROGRAMMING-LANGUAGES AND LANGUAGE FEATURES FOR ENGINEERING SOFTWARE-DEVELOPMENT. ENGINEERING WITH COMPUTERS, 3(4), 183–199. https://doi.org/10.1007/BF01202140

Rasdorf, W. J., & Herbert, M. J. (1988). CIMS: A Construction Information Management System. Computing in civil engineering: Microcomputers to supercomputers: Proceedings of the fifth conference, Radisson Mark Plaza Hotel, Alexandria, Virginia, March 29-31, 1988, 33–45. Alexandria, VA: American Society of Civil Engineers.

Herbert, M. J., & Rasdorf, W. (1988). CIMS: A construction information management system. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J. (1988). Engineering data management needs. Managing engineering data: The competitive edge: Presented at the 1987 ASME International Computers in Engineering Conference and Exhibition, August 9-13, 1987, New York, New York. New York, NY: American Society of Mechanical Engineers.

Collier, C. S., & Rasdorf, W. J. (1988). Finite element model and finite element analysis results relational database management system. Managing engineering data: Emerging issues : Presented at the 1988 ASME International Computers in Engineering Conference and Exhibition, July 31-August 4, 1988, San Francisco, California. San Francisco, CA: American Society of Mechanical Engineers.

Rasdorf, W. J., & Wang, T. E. (1988). Generic design standards processing in an expert system environment. Journal of Computing in Civil Engineering, 2(1), 68–87. https://doi.org/10.1061/(asce)0887-3801(1988)2:1(68)

Bhatt, R. V., Fisher, E. L., & Rasdorf, W. J. (1988). Information retrieval architectures for expert system/DBMS communication. In N. Botten & T. Raz (Eds.), Expert systems (pp. 34–39). Norcross, GA: Industrial Engineering and Management Press, Institute of Industrial Engineers.

Chao, A. C., Liu, Y., & Rasdorf, W. J. (1988). Spreadsheet approach for the design of air stripping of volatile organic contaminants (VOCs) from water. Computing in civil engineering: Microcomputers to supercomputers: Proceedings of the fifth conference, Radisson Mark Plaza Hotel, Alexandria, Virginia, March 29-31, 1988, 731–741. Alexandria, VA: American Society of Civil Engineers.

High, S. L., & Rasdorf, W. (1988). Steel W-Shape compression member design using modified interaction equations. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J., Lakmazaheri, S., Boose, L. K., & Wallace, R. J. (1988). The architecture of an integrated CAD/CAM system for the design and manufacturing of custom orthopedic footwear. Managing engineering data: Emerging issues : Presented at the 1988 ASME International Computers in Engineering Conference and Exhibition, July 31-August 4, 1988, San Francisco, California. San Francisco, CA: American Society of Mechanical Engineers.

Rasdorf, W. J., Dastoor, P. H., Batra, S. K., & Hersh, S. P. (1988). The database component of a hybrid CAD system for industrial fabrics design. Managing engineering data: Emerging issues : Presented at the 1988 ASME International Computers in Engineering Conference and Exhibition, July 31-August 4, 1988, San Francisco, California. San Francisco, CA: American Society of Mechanical Engineers.

RASDORF, W. J., ULBERG, K. J., & BAUGH, J. W. (1987). A STRUCTURE-BASED MODEL OF SEMANTIC INTEGRITY CONSTRAINTS FOR RELATIONAL DATABASES. ENGINEERING WITH COMPUTERS, 2(1), 31–39. https://doi.org/10.1007/BF01200175

Rasdorf, W. J., & Watson, B. R. (1987). A knowledge-based approach to engineering information retrieval and management. In Expert systems in construction and structural engineering (pp. 267–295). https://doi.org/10.4324/9780203401101_chapter_13

Yacout, A. M., Dunn, W. L., Rasdorf, W., & Turinsky, P. J. (1987). An expert system operator aid for nuclear power plant maneuvers. In Technical Report- Not held in TRLN member libraries. Washington, D.C.: U.S. Department of Energy.

Chao, A. C., Rasdorf, W. J., & Paige, W. (1987). Classifying industrial sludge using a knowledge-based expert system. Proceedings of the 42nd Industrial Waste Conference: May 12, 13, 14, 1987, Purdue University, West Lafayette, Indiana, 399–405. West Lafayette, IN: School of Civil Engineering, Purdue University.

Rasdorf, W. J., & Storaasli, O. O. (1987). Educational fundamentals of computer-aided engineering. International Journal of Applied Engineering Education, 3(3), 247–254.

Rasdorf, W. J. (1987). Extending database management systems for engineering applications. Computers in Mechanical Engineering, 5(5), 62–69.

Rasdorf, W. J., & Wang, T. E. (1987). Generic design standards processing in a knowledge-based expert system environment. Proceedings of the Workshop on the Design Process, 267–291. Oakland, CA: Design Theory and Methodology Program, National Science Foundation.

Rasdorf, W. J., & Parks, L. M. (1987). Natural language prototypes for analyzing design standards. In D. Sriram & R. A. Adey (Eds.), Artificial intelligence in engineering tools and techniques (pp. 147–160). https://doi.org/10.1016/0954-1810(87)90166-x

Holtz, N. M., & Rasdorf, W. J. (1987). Procedural programming languages for the development of CAD and CAE system software. Computers in engineering, 1987: Proceedings of the 1987 ASME International Computers in Engineering Conference and Exhibition, August 9-13, 1987, New York, New York. Vol. 2, 387–392. New York, NY: American Society of Mechanical Engineers.

Rasdorf, W. J., & Wang, T. E. (1987). SPIKE: A generic design standards processing expert system. In D. Sriram & R. A. Adey (Eds.), Knowledge based systems in engineering: Planning and design (pp. 241–257). Southampton, UK; Boston, MA: Computational Mechanics.

Rasdorf, W. J., & High, S. L. (1987). Simplified steel compression member design. Proceedings of the 1987 ASCE Structures Congress. Vol. D, Dynamics of structures, 352–367. Orlando, FL: American Society of Civil Engineers.

Rasdorf, W. J., & Watson, B. R. (1986). ADI: An adaptive database interface for dynamic databases. Proceedings of the 1986 ASME Symposium on Knowledge-Based Expert Systems for Manufacturing, 119–130. American Society of Mechanical Engineers.

Watson, B. R., & Rasdorf, W. (1986). ADI: An adaptive database interface for dynamic databases. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J., & Wang, T. E. (1986). CDIS: An engineering constraint definition and integrity enforcement system for relational databases. Computers in engineering, 1986: Proceedings of the 1986 ASME International Computers in Engineering Conference and Exhibition, July 20-24, 1986, Chicago, Illinois. Vol. 2, 273–280. Chicago, IL: American Society of Mechanical Engineers.

Rasdorf, W. J., & Fenves, S. J. (1986). Constraint enforcement in structural design databases. Journal of the Structural Division, 112(12), 2565–2577. https://doi.org/10.1061/(asce)0733-9445(1986)112:12(2565)

Rasdorf, W. J., & Wang, T. E. (1986). Expert system integrity maintenance for the retrieval of data from engineering databases. Computing in civil engineering: Proceedings of the fourth conference, Boston Marriott Hotel, Boston, Massachusetts, October 27-31, 1986, 654–668. Boston, MA: American Society of Civil Engineers.

Rasdorf, W. J., & Parks, L. M. (1986). Expert systems and engineering design knowledge. Electronic computation: Proceedings of the Ninth Conference on Electronic Computation, UAB Continuing Education Center, University of Alabama at Birmingham, February 23-26, 1986, 28–42. New York, NY: American Society of Civil Engineers.

Wang, T. E., & Rasdorf, W. (1986). Generic design standards processing in a knowledge-based expert system environment. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J., & Fisher, E. L. (1985). Artificial intelligence research in engineering at North Carolina State University. Artificial Intelligence (New York, N.Y. : 1970), 6(2), 80–82.

Rasdorf, W. J. (1985). Computer programming in the civil engineering curriculum. Journal of Professional Issues in Engineering, 111(4), 141–148. https://doi.org/10.1061/(asce)1052-3928(1985)111:4(141)

Rasdorf, W. J., & Fisher, E. L. (1985). Engineering knowledge management research at North Carolina State University. SIGART Newsletter, 92, 97–99.

RASDORF, W. J., & SALLEY, G. C. (1985). GENERATIVE ENGINEERING DATABASES - TOWARD EXPERT SYSTEMS. COMPUTERS & STRUCTURES, 20(1-3), 11–15. https://doi.org/10.1016/0045-7949(85)90048-3

Fisher, E. L., Rasdorf, W., Bhatt, R. V., & Watson, B. R. (1985). Information acquisition, representation, and management in the design and control of computer integrated manufacturing systems. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.:  Integrated Manufacturing Systems Engineering Institute.

Rasdorf, W., & Chern, S. C. (1985). Load consultant: A knowledge management investigation. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J. (1985). Perspectives on knowledge in engineering design. Computers in engineering, 1985: Proceedings of the 1985 ASME International Computers in Engineering Conference and Exhibition, August 4-8, 1985, Boston, Massachusetts. Vol. 2, 249–253. Boston, MA: American Society of Mechanical Engineers.

Rasdorf, W. J., & Storaasli, O. O. (1985). The role of computing in engineering education. Computers in education: Proceedings of the IFIP TC 3 4th World Conference on Computers in Education--WCCE 85, Norfolk, VA, USA, July 29-August 2, 1985, 417–423. Norfolk, VA: North-Holland Publishing Company, International Federation for Information Processing (IFIP).

Fenves, S. J., & Rasdorf, W. J. (1985). Treatment of engineering design constraints in a relational database. Engineering With Computers, 1(1), 27–37. https://doi.org/10.1007/bf01200336

Rasdorf, W., & Sun, L. S. (1984). Automated generation of engineering design data. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J. (1984). Civil engineering educational computing: Beyond an introduction. Proceedings of the Third Conference on Computing in Civil Engineering, 134–142. San Diego, CA: American Society of Civil Engineers.

Rasdorf, W. (1984). Knowledge engineering and expert systems - a historical perspective and introduction. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Rasdorf, W. J. (1984). Relational database modeling of building design data. Computing in civil engineering: Proceedings of the third conference, Holiday Inn at the Embarcadaro, San Diego, California, April 2-6, 1984, 364–371. San Diego, CA: American Society of Civil Engineers.

Rasdorf, W., & Chung, T. (1984). Specification and implementation of constraints in a relational database for engineering design. In Technical Report- Not held in TRLN member libraries. Raleigh, N.C.: Department of Civil Engineering, North Carolina State University.

Holtz, N. M., & Rasdorf, W. J. (1983). LISP: A CAD system programming language. Journal of Technical Topics in Civil Engineering, 109(1), 58–72.

Rasdorf, W. J., & Fenves, S. J. (1983). Organization of a structural design database. Proceedings of the Eighth Conference on Electronic Computation: Continuing Education Center, University of Houston, Houston, Texas, February 21-23 1983, 559–571. Houston, TX: American Society of Civil Engineers.

RASDORF, W. J., & KUTAY, A. R. (1982). MAINTENANCE OF INTEGRITY DURING CONCURRENT ACCESS IN A BUILDING DESIGN DATABASE. COMPUTER-AIDED DESIGN, 14(4), 201–207. https://doi.org/10.1016/0010-4485(82)90291-3

Fenves, S. J., & Rasdorf, W. J. (1982). Role of database management systems in structural engineering. Proceedings of the IABSE Colloquium on Informatics in Structural Engineering, 229–242. Bergamo, Italy: International Association of Bridge and Structural Engineers (IABSE).

Fenves, S. J., & Rasdorf, W. (1982). Role of database management systems in structural engineering. In Technical Report- Not held in TRLN member libraries. Pittsburgh, Pa.:  Design Research Center, Carnegie-Mellon University.

Rasdorf, W. (1982). Structure and integrity of a structural engineering design database. In Technical Report- Not held in TRLN member libraries. Pittsburgh, Pa.:  Design Research Center, Carnegie-Mellon University.

Holtz, N. M., & Rasdorf, W. (1982). The use of LISP for computer-aided design systems. In Technical Report- Not held in TRLN member libraries. Pittsburgh, Pa.:  Design Research Center, Carnegie-Mellon University.

Fenves, S. J., & Rasdorf, W. (1982). Treatment of engineering design constraints in a relational database. In Technical Report- Not held in TRLN member libraries. Pittsburgh, Pa.:  Design Research Center, Carnegie-Mellon University.

Rasdorf, W. (1980). American Institute of Steel Construction Fellowship Study. In Technical Report- Not held in TRLN member libraries. Pittsburgh, Pa.:  Carnegie-Mellon University.

Rasdorf, W. J., & Fenves, S. J. (1980). Design specification representation and analysis. Proceedings of the second Conference on Computing in Civil Engineering: Lord Baltimore Hotel, Baltimore, Maryland, June 9-13, 1980, 102–111. New York, NY: American Society of Civil Engineers.

Rasdorf, W., Fenves, S. J., & Locke, M. (1980). Some common issues in databases for engineering design. In Technical Report- Not held in TRLN member libraries. Pittsburgh, Pa.:  Design Research Center, Carnegie-Mellon University.

Rasdorf, W., & Fenves, S. J. (1979). Representation and analysis of design specifications at the interface between outlines, networks, and decision tables. In Technical Report- Not held in TRLN member libraries. Pittsburgh, Pa.:  Carnegie-Mellon University.