Rohan Shirwaiker

Shohan, S., Zeng, Y., Chen, X., Jin, R., & Shirwaiker, R. (2022). Investigating dielectric spectroscopy and soft sensing for nondestructive quality assessment of engineered tissues. BIOSENSORS & BIOELECTRONICS, 216. https://doi.org/10.1016/j.bios.2022.114286

Schuchard, K. G., Pawar, A., Anderson, B., Pourdeyhimi, B., & Shirwaiker, R. A. (2022). Multiphase CFD Modeling and Experimental Validation of Polymer and Attenuating Air Jet Interactions in Nonwoven Annular Melt Blowing. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 61(37), 13962–13971. https://doi.org/10.1021/acs.iecr.2c01710

Chansoria, P., Asif, S., Gupta, N., Piedrahita, J., & Shirwaiker, R. A. (2022, January 27). Multiscale Anisotropic Tissue Biofabrication via Bulk Acoustic Patterning of Cells and Functional Additives in Hybrid Bioinks. ADVANCED HEALTHCARE MATERIALS, Vol. 1. https://doi.org/10.1002/adhm.202102351

Brovold, M., Keller, D., Devarasetty, M., Dominijanni, A., Shirwaiker, R., & Soker, S. (2021, June 5). Biofabricated 3D in vitro model of fibrosis-induced abnormal hepatoblast/biliary progenitors' expansion of the developing liver. BIOENGINEERING & TRANSLATIONAL MEDICINE, Vol. 12. https://doi.org/10.1002/btm2.10207

Maturavongsadit, P., Narayanan, L. K., Chansoria, P., Shirwaiker, R., & Benhabbour, S. R. (2021). Cell-Laden Nanocellulose/Chitosan-Based Bioinks for 3D Bioprinting and Enhanced Osteogenic Cell Differentiation. ACS APPLIED BIO MATERIALS, 4(3), 2342–2353. https://doi.org/10.1021/acsabm.0c01108

Chansoria, P., Asif, S., Polkoff, K., Chung, J., Piedrahita, J. A., & Shirwaiker, R. A. (2021). Characterizing the Effects of Synergistic Thermal and Photo-Cross-Linking during Biofabrication on the Structural and Functional Properties of Gelatin Methacryloyl (GeIMA) Hydrogels. ACS BIOMATERIALS SCIENCE & ENGINEERING, 7(11), 5175–5188. https://doi.org/10.1021/acsbiomaterials.1c00635

Schuchard, K., Joijode, A., Willard, V. P., Anderson, B., Grondin, P., Pourdeyhimi, B., & Shirwaiker, R. (2021). Fabrication of drug-loaded ultrafine polymer fibers via solution blowing and their drug release kinetics. 49TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 49, 2021), Vol. 53, pp. 128–135. https://doi.org/10.1016/j.promfg.2021.06.017

Shohan, S., Harm, J., Hasan, M., Starly, B., & Shirwaiker, R. (2021). Non-destructive quality monitoring of 3D printed tissue scaffolds via dielectric impedance spectroscopy and supervised machine learning. 49TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 49, 2021), Vol. 53, pp. 636–643. https://doi.org/10.1016/j.promfg.2021.06.063

Chansoria, P., Schuchard, K., & Shirwaiker, R. A. (2021). [Review of Process hybridization schemes for multiscale engineered tissue biofabrication]. WILEY INTERDISCIPLINARY REVIEWS-NANOMEDICINE AND NANOBIOTECHNOLOGY, 13(2). https://doi.org/10.1002/wnan.1673

Manzi, B., Shirwaiker, R., Gungor, A., & Weinberger, P. (2021). Steroid eluting biocompatible stent for subglottic stenosis. EUROPEAN ARCHIVES OF OTO-RHINO-LARYNGOLOGY, 278(4), 1153–1158. https://doi.org/10.1007/s00405-020-06562-y

Nordberg, R. C., Huebner, P., Schuchard, K. G., Mellor, L. F., Shirwaiker, R. A., Loboa, E. G., & Spang, J. T. (2021, June 10). The evaluation of a multiphasic 3D-bioplotted scaffold seeded with adipose derived stem cells to repair osteochondral defects in a porcine model. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, Vol. 6. https://doi.org/10.1002/jbm.b.34886

Chansoria, P., & Shirwaiker, R. (2020). 3D bioprinting of anisotropic engineered tissue constructs with ultrasonically induced cell patterning. ADDITIVE MANUFACTURING, 32. https://doi.org/10.1016/j.addma.2020.101042

Chansoria, P., Narayanan, L. K., Wood, M., Alvarado, C., Lin, A., & Shirwaiker, R. A. (2020). Effects of Autoclaving, EtOH, and UV Sterilization on the Chemical, Mechanical, Printability, and Biocompatibility Characteristics of Alginate. ACS BIOMATERIALS SCIENCE & ENGINEERING, 6(9), 5191–5201. https://doi.org/10.1021/acsbiomaterials.0c00806

Narayanan, L. K., & Shirwaiker, R. (2020). Experimental Characterization and Finite Element Modeling of the Effects of 3D Bioplotting Process Parameters on Structural and Tensile Properties of Polycaprolactone (PCL) Scaffolds. Applied Sciences, 10(15), 5289. https://doi.org/10.3390/app10155289

Shirwaiker, R. A., Fisher, M. B., Anderson, B., Schuchard, K. G., Warren, P. B., Maze, B., … Pourdeyhimi, B. (2020). High-Throughput Manufacture of 3D Fiber Scaffolds for Regenerative Medicine. TISSUE ENGINEERING PART C-METHODS, 26(7), 364–374. https://doi.org/10.1089/ten.tec.2020.0098

Mellor, L. F., Nordberg, R. C., Huebner, P., Mohiti-Asli, M., Taylor, M. A., Efird, W., … Loboa, E. G. (2020). Investigation of multiphasic 3D-bioplotted scaffolds for site-specific chondrogenic and osteogenic differentiation of human adipose-derived stem cells for osteochondral tissue engineering applications. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 108(5), 2017–2030. https://doi.org/10.1002/jbm.b.34542

Huebner, P., Warren, P. B., Chester, D., Spang, J. T., Brown, A. C., Fisher, M. B., & Shirwaiker, R. A. (2020). Mechanical properties of tissue formed in vivo are affected by 3D-bioplotted scaffold microarchitecture and correlate with ECM collagen fiber alignment. CONNECTIVE TISSUE RESEARCH, 61(2), 190–204. https://doi.org/10.1080/03008207.2019.1624733

Review: Modeling in Situ Liver Cancer. (2020). Annals of Gastroenterology and Digestive Disorders. Retrieved from https://www.somatopublications.com/review-modeling-in-situ-liver-cancer.pdf

Asif, S., Chansoria, P., & Shirwaiker, R. (2020, August). Ultrasound-assisted vat photopolymerization 3D printing of preferentially organized carbon fiber reinforced polymer composites. JOURNAL OF MANUFACTURING PROCESSES, Vol. 56, pp. 1340–1343. https://doi.org/10.1016/j.jmapro.2020.04.029

Chansoria, P., & Shirwaiker, R. (2019). Characterizing the Process Physics of Ultrasound-Assisted Bioprinting. SCIENTIFIC REPORTS, 9. https://doi.org/10.1038/s41598-019-50449-w

Tan, G. Z., Orndorff, P. E., & Shirwaiker, R. A. (2019). The Ion Delivery Manner Influences the Antimicrobial Efficacy of Silver Oligodynamic Iontophoresis. JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING, 39(4), 622–631. https://doi.org/10.1007/s40846-018-0447-1

Chansoria, P., Narayanan, L. K., Schuchard, K., & Shirwaiker, R. (2019). Ultrasound-assisted biofabrication and bioprinting of preferentially aligned three-dimensional cellular constructs. BIOFABRICATION, 11(3). https://doi.org/10.1088/1758-5090/ab15cf

Narayanan, L. K., Thompson, T. L., Shirwaiker, R. A., & Starly, B. (2018). Label free process monitoring of 3D bioprinted engineered constructs via dielectric impedance spectroscopy. BIOFABRICATION, 10(3). https://doi.org/10.1088/1758-5090/aaccbf

Tan, Z., Havell, E. A., Orndorff, P. E., & Shirwaiker, R. A. (2017). Antibacterial efficacy and cytotoxicity of low intensity direct current activated silver-titanium implant system prototype. BIOMETALS, 30(1), 113–125. https://doi.org/10.1007/s10534-017-9993-1

Mehendale, S. V., Mellor, L. F., Taylor, M. A., Loboa, E. G., & Shirwaiker, R. A. (2017). Effects of 3D-bioplotted polycaprolactone scaffold geometry on human adipose-derived stem cell viability and proliferation. RAPID PROTOTYPING JOURNAL, 23(3), 534–542. https://doi.org/10.1108/rpj-03-2016-0035

Warren, P. B., Huebner, P., Spang, J. T., Shirwaiker, R. A., & Fisher, M. B. (2017). Engineering 3D-Bioplotted scaffolds to induce aligned extracellular matrix deposition for musculoskeletal soft tissue replacement. CONNECTIVE TISSUE RESEARCH, 58(3-4), 342–354. https://doi.org/10.1080/03008207.2016.1276177

Mellor, L. F., Huebner, P., Cai, S., Mohiti-Asli, M., Taylor, M. A., Spang, J., … Loboa, E. G. (2017). Fabrication and Evaluation of Electrospun, 3D-Bioplotted, and Combination of Electrospun/3D-Bioplotted Scaffolds for Tissue Engineering Applications. BIOMED RESEARCH INTERNATIONAL, 2017. https://doi.org/10.1155/2017/6956794

Narayanan, L. K., Thompson, T. L., Bhat, A., Starly, B., & Shirwaiker, R. (2017). Investigating dielectric impedance spectroscopy as a non-destructive quality assessment tool for 3D cellular constructs. Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference - 2017, vol 4. https://doi.org/10.1115/msec2017-2725

Narayanan, L. K., Thompson, T. L., Bhat, A., Starly, B., & Shirwaiker, R. A. (2017). Investigating dielectric impedance spectroscopy as a non-destructive quality assessment tool for 3D cellular constructs. ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing, 4. https://doi.org/10.1115/MSEC20172725

Narayanan, L. K., Starly, B., & Shirwaiker, R. A. (2017). Non-destructive quality assessment of 3D-biofabricated constructs using dielectric impedance spectroscopy. 67th Annual Conference and Expo of the Institute of Industrial Engineers 2017, 1846–1851. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-85030973322&partnerID=MN8TOARS

Narayanan, L. K., Huebner, P., Fisher, M. B., Spang, J. T., Starly, B., & Shirwaiker, R. A. (2016). 3D-Bioprinting of Polylactic Acid (PLA) Nanofiber–Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells. ACS Biomaterials Science & Engineering, 2(10), 1732–1742. https://doi.org/10.1021/acsbiomaterials.6b00196

Tan, Z., Xu, G., Orndorff, P. E., & Shirwaiker, R. A. (2016). Effects of Electrically Activated Silver-Titanium Implant System Design Parameters on Time-Kill Curves Against Staphylococcus aureus. JOURNAL OF MEDICAL AND BIOLOGICAL ENGINEERING, 36(3), 325–333. https://doi.org/10.1007/s40846-016-0136-x

Cavanaugh, D. L., Tan, Z., Norris, J. P., Hardee, A., Weinhold, P. S., Dahners, L. E., … Shirwaiker, R. A. (2016). Evaluation of silver-titanium implants activated by low intensity direct current for orthopedic infection control: An in vitro and in vivo study. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 104(5), 1023–1031. https://doi.org/10.1002/jbm.b.33451

Johnson, C., Sheshadri, P., Ketchum, J. M., Narayanan, L. K., Weinberger, P. M., & Shirwaiker, R. A. (2016). In vitro characterization of design and compressive properties of 3D-biofabricated/decellularized hybrid grafts for tracheal tissue engineering. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 59, 572–585. https://doi.org/10.1016/j.jmbbm.2016.03.024

Starly, B., & Shirwaiker, R. (2015). 3D Bioprinting Techniques. In 3D Bioprinting and Nanotechnology in Tissue Engineering and Regenerative Medicine (pp. 57–77). https://doi.org/10.1016/B978-0-12-800547-7.00003-5

Shirwaiker, R. A., Springer, B. D., Spangehl, M. J., Garrigues, G. E., Lowenberg, D. W., Garras, D. N., … Pottinger, P. S. (2015). A Clinical Perspective on Musculoskeletal Infection Treatment Strategies and Challenges. JOURNAL OF THE AMERICAN ACADEMY OF ORTHOPAEDIC SURGEONS, 23, S44–S54. https://doi.org/10.5435/jaaos-d-14-00379

Narayanan, L. K., Kumar, A., Tan, Z. (G., Bernacki, S., Starly, B., & Shirwaiker, R. A. (2015). Alginate Microspheroid Encapsulation and Delivery of MG-63 Cells Into Polycaprolactone Scaffolds: A New Biofabrication Approach for Tissue Engineering Constructs. Journal of Nanotechnology in Engineering and Medicine, 6(2). https://doi.org/10.1115/1.4031174

Sheshadri, P., & Shirwaiker, R. A. (2015). Characterization of material-process-structure interactions in the 3D Bioplotting of Polycaprolactone. 3D Printing and Additive Manufacturing, 2(1), 20–31. https://doi.org/10.1089/3dp.2014.0025

Tan, Z., Ganapathy, A., Orndorff, P. E., & Shirwaiker, R. A. (2015). Effects of cathode design parameters on in vitro antimicrobial efficacy of electrically-activated silver-based iontophoretic system. Journal of Materials Science: Materials in Medicine, 26(1), 1–10. https://doi.org/10.1007/s10856-015-5382-x

Hunsberger, J., Harrysson, O., Shirwaiker, R., Starly, B., Wysk, R., Cohen, P., … Atala, A. (2015). Manufacturing Road Map for Tissue Engineering and Regenerative Medicine Technologies. STEM CELLS TRANSLATIONAL MEDICINE, 4(2), 130–135. https://doi.org/10.5966/sctm.2014-0254

Shirwaiker, R. A., Wysk, R. A., Kariyawasam, S., Voigt, R. C., Carrion, H., & Nembhard, H. B. (2014). Interdigitated silver-polymer-based antibacterial surface system activated by oligodynamic iontophoresis - An empirical characterization study. BIOMEDICAL MICRODEVICES, 16(1), 1–10. https://doi.org/10.1007/s10544-013-9800-x

Shirwaiker, R. A., Purser, M. F., & Wysk, R. A. (2014). Scaffolding hydrogels for rapid prototyping based tissue engineering. In Rapid Prototyping of Biomaterials: Principles and Applications (pp. 176–200). https://doi.org/10.1533/9780857097217.176

Samberg, M. E., Tan, Z., Monteiro-Riviere, N. A., Orndorff, P. E., & Shirwaiker, R. A. (2013). Biocompatibility analysis of an electrically-activated silver-based antibacterial surface system for medical device applications. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 24(3), 755–760. https://doi.org/10.1007/s10856-012-4838-5

Tan, Z., Shirwaiker, R., & Orndoff, P. E. (2013). Determining optimal current intensity and duration for electrically activated silver-based prophylactic hip implant prototype design. ASME 2013 Summer Bioengineering Conference, SBC 2013, 1 B. https://doi.org/10.1115/sbc2013-14141

Shirwaiker, R. A., Samberg, M. E., Cohen, P. H., Wysk, R. A., & Monteiro-Riviere, N. A. (2013). [Review of Nanomaterials and synergistic low-intensity direct current (LIDC) stimulation technology for orthopedic implantable medical devices]. WILEY INTERDISCIPLINARY REVIEWS-NANOMEDICINE AND NANOBIOTECHNOLOGY, 5(3), 191–204. https://doi.org/10.1002/wnan.1201

Shirwaiker, R. A., Tan, Z., & Cohen, P. H. (2013). Regenerative medicine manufacturing. Industrial Engineer, Vol. 45, pp. 32–37. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84882976891&partnerID=MN8TOARS

Carrion, H., Joshi, S., Shirwaiker, R., & Fonash, S. J. (2012). A novel fabrication method for embedding metal structures into polymers for flexible electronics. 62nd IIE Annual Conference and Expo 2012, 3212–3221. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900336522&partnerID=MN8TOARS

Kazemi-Tutunchi, G., Wei, C., Shirwaiker, R. A., & Dong, J. (2012). A process engineering perspective of scaffold fabrication methods in regenerative medicine: A review. 62nd IIE Annual Conference and Expo 2012, 3096–3105. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900330276&partnerID=MN8TOARS

Tan, Z., & Shirwaiker, R. A. (2012). A review of emerging industrial and systems engineering trends and future directions in biomanufacturing. 62nd IIE Annual Conference and Expo 2012, 2354–2361. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900322032&partnerID=MN8TOARS

Shirwaiker, R. A., & Okudan, G. E. (2011). Contributions of TRIZ and axiomatic design to leanness in design: An investigation. Procedia Engineering, 9, 730–735. https://doi.org/10.1016/j.proeng.2011.03.162

Shirwaiker, R. A., Voigt, R. C., & Wysk, R. A. (2011). Effects of critical design parameters on antibacterial efficacy of a silver ions-based antibacterial surface system. 61st Annual IIE Conference and Expo Proceedings. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900320661&partnerID=MN8TOARS

Shirwaiker, R. A., Wysk, R. A., Kariyawasam, S., Carrion, H., & Voigt, R. C. (2011). Micro-scale fabrication and characterization of a silver-polymer-based electrically activated antibacterial surface. BIOFABRICATION, 3(1). https://doi.org/10.1088/1758-5082/3/1/015003

Yang, Z., Shirwaiker, R. A., & Wysk, R. A. (2011). Optimization of manufacturing operations using a new interactive computer-aided process planning program. 61st Annual IIE Conference and Expo Proceedings. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84900313847&partnerID=MN8TOARS

Shirwaiker, R. A., Voigt, R. C., & Wysk, R. A. (2010). Design of an electrically activated silver-based antibacterial surface system. IIE Annual Conference and Expo 2010 Proceedings. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-84901037163&partnerID=MN8TOARS

Fuller, T. A., Wysk, R. A., Charumani, C., Kennett, M., Sebastiennelli, W. J., Abrahams, R., … Royer, P. (2010). Developing an engineered antimicrobial/prophylactic system using electrically activated bactericidal metals. Journal of Materials Science: Materials in Medicine, 21(7), 2103–2114. https://doi.org/10.1007/s10856-010-4071-z

Shirwaiker, R. A., & Okudan, G. E. (2008). Triz and axiomatic design: A review of case-studies and a proposed synergistic use. Journal of Intelligent Manufacturing, 19(1), 33–47. https://doi.org/10.1007/s10845-007-0044-6

Shirwaiker, R. A., & Okudan, G. E. (2007). Using triz and axiomatic design synergistically: A case study. International Journal of Innovation and Technology Management, 4(2), 155–170. https://doi.org/10.1142/S021987700700103X

Okudan, G. E., & Shirwaiker, R. A. (2006). A multi-stage problem formulation for concept selection for improved product design. Portland International Conference on Management of Engineering and Technology, 6, 2528–2538. https://doi.org/10.1109/PICMET.2006.296850

Okudan, G. E., Ogot, M., & Shirwaiker, R. (2006). An investigation on the effectiveness of design ideation using TRIZ. Proceedings of the ASME Design Engineering Technical Conference, 2006. Retrieved from http://www.scopus.com/inward/record.url?eid=2-s2.0-33751337036&partnerID=MN8TOARS

Shirwaiker, R. A., & Okudan, G. E. (2006). TRIZ and axiomatic design: A review of manufacturing case-studies & their compatibility. Portland International Conference on Management of Engineering and Technology, 6, 2510–2520. https://doi.org/10.1109/PICMET.2006.296848