Ryan Michael Schoell

Correlated transmission electron microscopy and atom probe tomography characterization of ion irradiated Ni-based alloy Hastelloy N

Gardner, H. M., Schoell, R., Qiu, J., Carter, M., Hosemann, P., Moody, M., … Armstrong, D. E. J. (2025, July 2). Materials Characterization, Vol. 227.

Effect of irradiation on the corrosion of 304 stainless steel in pressurized water reactor (PWR) simulated water chemistry

Tsai, F.-Y., Schoell, R., Hattar, K., & Kaoumi, D. (2024, September 14). Corrosion Science, Vol. 240.

Corrosion behavior of a series of combinatorial physical vapor deposition coatings on SiC in a simulated boiling water reactor environment

Schoell, R., Kabel, J., Lam, S., Sharma, A., Michler, J., Hosemann, P., & Kaoumi, D. (2022, September 27). Journal of Nuclear Materials, Vol. 572.

Investigation of the fatigue crack behavior of 304 stainless steels using synchrotron X-ray tomography and diffraction: Influence of the martensite fraction and role of inclusions

Schoell, R., West, H., Hosemann, P., Park, J.-S., Kenesei, P., Almer, J., … Kaoumi, D. (2022, April 18). Materials Characterization, Vol. 188.

Laser powder bed fusion additive manufacturing of oxide dispersion strengthened steel using gas atomized reaction synthesis powder

Horn, T., Rock, C., Kaoumi, D., Anderson, I., White, E., Prost, T., … Darsell, J. (2022, March 24). Materials & Design, Vol. 216.

Mechanism of chlorine-induced stress corrosion cracking of two 304 SS heats in simulated marine environment through in situ X-ray tomography and diffraction: Role of deformation induced martensite and crack branching

Schoell, R., Zhao, Y., Wu, X., Hong, Y., Yu, Z., Kenesei, P., … Kaoumi, D. (2022, June 2). Materials Characterization, Vol. 190.

Synthesis of Nano-Oxide Precipitates by Implantation of Ti, Y and O Ions in Fe-10%Cr: Towards an Understanding of Precipitation in Oxide Dispersion-Strengthened (ODS) Steels

Jublot-Leclerc, S., Owusu-Mensah, M., Borodin, V. A., Ribis, J., Largeau, L., Schoell, R., … Gentils, A. (2022, July 12). Materials, Vol. 15.

Creep properties of advanced austenitic steel 709 determined through short experiments under in-situ neutron diffraction followed by TEM characterization

Zhao, Y., Schoell, R., Zheng, C., Cinbiz, M. N., Frost, M., An, K., & Kaoumi, D. (2021, October 13). Materials Characterization, Vol. 182.

Electrochemical study of the dissolution of oxide films grown on type 316L stainless steel in molten fluoride salt

Qiu, J., Macdonald, D. D., Schoell, R., Han, J., Mastromarino, S., Scully, J. R., … Hosemann, P. (2021, April 8). Corrosion Science, Vol. 186.

Electrical properties of thermal oxide scales on pure iron in liquid lead-bismuth eutectic

Qiu, J., Han, J., Schoell, R., Popovic, M., Ghanbari, E., Kaoumi, D., … Hosemann, P. (2020, October 6). Corrosion Science, Vol. 176.

In Situ Micropillar Compression Tests of 304 Stainless Steels After Ion Irradiation and Helium Implantation

Schoell, R., Frazer, D., Zheng, C., Hosemann, P., & Kaoumi, D. (2020, March 26). JOM, Vol. 72, pp. 2778–2785.

In situ synchrotron X-ray tomography of 304 stainless steels undergoing chlorine-induced stress corrosion cracking

Schoell, R., Zhao, Y., Wu, X., Yu, Z., Kenesei, P., Almer, J., … Kaoumi, D. (2020, April 22). Corrosion Science, Vol. 170.

Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel

Remillieux, M. C., Kaoumi, D., Ohara, Y., Geesey, M. A. S., Schoell, R., Bryan, C. R., … Shayer, Z. (2019, November 2). NDT & E International, Vol. 109.

Environmental effect on mechanical properties of a gamma-prime strengthened nickel-based alloy: Effect of the surface oxidation and formation of gamma-prime free zones

Marsh, C., Schoell, R., & Kaoumi, D. (2019, March 7). Materials Science and Engineering A, Vol. 752, pp. 136–144.

Ion irradiation effects on commercial PH 13-8 Mo maraging steel Corrax

Zheng, C., Schoell, R., Hosemann, P., & Kaoumi, D. (2018, December 1). Journal of Nuclear Materials, Vol. 514, pp. 255–265.