Ryan Schoell

Gardner, H. M., Schoell, R., Qiu, J., Carter, M., Hosemann, P., Moody, M., … Armstrong, D. E. J. (2025, July 2). Correlated transmission electron microscopy and atom probe tomography characterization of ion irradiated Ni-based alloy Hastelloy N. Materials Characterization, Vol. 227. https://doi.org/10.1016/j.matchar.2025.115316

Tsai, F.-Y., Schoell, R., Hattar, K., & Kaoumi, D. (2024, September 14). Effect of irradiation on the corrosion of 304 stainless steel in pressurized water reactor (PWR) simulated water chemistry. Corrosion Science, Vol. 240. https://doi.org/10.1016/j.corsci.2024.112454

Schoell, R., Kabel, J., Lam, S., Sharma, A., Michler, J., Hosemann, P., & Kaoumi, D. (2022, September 27). Corrosion behavior of a series of combinatorial physical vapor deposition coatings on SiC in a simulated boiling water reactor environment. Journal of Nuclear Materials, Vol. 572. https://doi.org/10.1016/j.jnucmat.2022.154022

Schoell, R., West, H., Hosemann, P., Park, J.-S., Kenesei, P., Almer, J., … Kaoumi, D. (2022, April 18). Investigation of the fatigue crack behavior of 304 stainless steels using synchrotron X-ray tomography and diffraction: Influence of the martensite fraction and role of inclusions. Materials Characterization, Vol. 188. https://doi.org/10.1016/j.matchar.2022.111903

Horn, T., Rock, C., Kaoumi, D., Anderson, I., White, E., Prost, T., … Darsell, J. (2022, March 24). Laser powder bed fusion additive manufacturing of oxide dispersion strengthened steel using gas atomized reaction synthesis powder. Materials & Design, Vol. 216. https://doi.org/10.1016/j.matdes.2022.110574

Schoell, R., Zhao, Y., Wu, X., Hong, Y., Yu, Z., Kenesei, P., … Kaoumi, D. (2022, June 2). Mechanism of chlorine-induced stress corrosion cracking of two 304 SS heats in simulated marine environment through in situ X-ray tomography and diffraction: Role of deformation induced martensite and crack branching. Materials Characterization, Vol. 190. https://doi.org/10.1016/j.matchar.2022.112020

Jublot-Leclerc, S., Owusu-Mensah, M., Borodin, V. A., Ribis, J., Largeau, L., Schoell, R., … Gentils, A. (2022, July 12). Synthesis of Nano-Oxide Precipitates by Implantation of Ti, Y and O Ions in Fe-10%Cr: Towards an Understanding of Precipitation in Oxide Dispersion-Strengthened (ODS) Steels. Materials, Vol. 15. https://doi.org/10.3390/ma15144857

Zhao, Y., Schoell, R., Zheng, C., Cinbiz, M. N., Frost, M., An, K., & Kaoumi, D. (2021, October 13). Creep properties of advanced austenitic steel 709 determined through short experiments under in-situ neutron diffraction followed by TEM characterization. Materials Characterization, Vol. 182. https://doi.org/10.1016/j.matchar.2021.111519

Qiu, J., Macdonald, D. D., Schoell, R., Han, J., Mastromarino, S., Scully, J. R., … Hosemann, P. (2021, April 8). Electrochemical study of the dissolution of oxide films grown on type 316L stainless steel in molten fluoride salt. Corrosion Science, Vol. 186. https://doi.org/10.1016/j.corsci.2021.109457

Qiu, J., Han, J., Schoell, R., Popovic, M., Ghanbari, E., Kaoumi, D., … Hosemann, P. (2020, October 6). Electrical properties of thermal oxide scales on pure iron in liquid lead-bismuth eutectic. Corrosion Science, Vol. 176. https://doi.org/10.1016/j.corsci.2020.109052

Schoell, R., Frazer, D., Zheng, C., Hosemann, P., & Kaoumi, D. (2020, March 26). In Situ Micropillar Compression Tests of 304 Stainless Steels After Ion Irradiation and Helium Implantation. JOM, Vol. 72, pp. 2778–2785. https://doi.org/10.1007/s11837-020-04127-2

Schoell, R., Zhao, Y., Wu, X., Yu, Z., Kenesei, P., Almer, J., … Kaoumi, D. (2020, April 22). In situ synchrotron X-ray tomography of 304 stainless steels undergoing chlorine-induced stress corrosion cracking. Corrosion Science, Vol. 170. https://doi.org/10.1016/j.corsci.2020.108687

Remillieux, M. C., Kaoumi, D., Ohara, Y., Geesey, M. A. S., Schoell, R., Bryan, C. R., … Shayer, Z. (2019, November 2). Detecting and imaging stress corrosion cracking in stainless steel, with application to inspecting storage canisters for spent nuclear fuel. NDT & E International, Vol. 109. https://doi.org/10.1016/j.ndteint.2019.102180

Marsh, C., Schoell, R., & Kaoumi, D. (2019, March 7). Environmental effect on mechanical properties of a gamma-prime strengthened nickel-based alloy: Effect of the surface oxidation and formation of gamma-prime free zones. Materials Science and Engineering A, Vol. 752, pp. 136–144. https://doi.org/10.1016/j.msea.2019.03.013

Zheng, C., Schoell, R., Hosemann, P., & Kaoumi, D. (2018, December 1). Ion irradiation effects on commercial PH 13-8 Mo maraging steel Corrax. Journal of Nuclear Materials, Vol. 514, pp. 255–265. https://doi.org/10.1016/j.jnucmat.2018.11.041