Richard Lemaster Edwards, K., Campbell, L., Lemaster, R., & Velarde, G. (2018). The Use of Acoustic Emission to Detect Fines for Wood Based Composites, Part Two: Use on Flakes. BIORESOURCES, 13(4), 8751–8760. https://doi.org/10.15376/biores.13.4.8751-8760 Campbell, L., Edwards, K., Lemaster, R., & Velarde, G. (2018). The Use of Acoustic Emission to Detect Fines for Wood-Based Composites, Part One: Experimental Setup for Use on Particleboard. BIORESOURCES, 13(4), 8738–8750. https://doi.org/10.15376/biores.13.4.8738-8750 Lemaster, R. L., & Schultz, J. (2016). The use of acousto-ultrasonics to determine the quality of the brazing of carbide-tipped cutting tools. WOOD MATERIAL SCIENCE & ENGINEERING, 11(3), 164–169. https://doi.org/10.1080/17480272.2016.1146798 Hodousek, M., Bohm, M., Lemaster, R. L., Bures, M., Berankova, J., & Cvach, J. (2015). [Review of Air permeation rate of oriented strand boards (OSB/3 and OSB/4)]. BioResources, 10(1), 1137–1148. https://doi.org/10.15376/biores.10.1.1137-1148 Saloni, D. E., Lemaster, R., & Jackson, S. (2011). Control system evaluation and implementation for the abrasive machining process on wood. BioResources, 6(3), 2763–2775. Arrieche, R., Saloni, D., Dyk, H., & Lemaster, R. L. (2011). Evaluation of the Energy Balance for the Production of Briquettes from Biomass. FOREST PRODUCTS JOURNAL, 61(4), 302–309. https://doi.org/10.13073/0015-7473-61.4.302 Saloni, D., Buehlmann, U., & Lemaster, R. L. (2011). Tool Wear When Cutting Wood Fiber-Plastic Composite Materials. FOREST PRODUCTS JOURNAL, 61(2), 149–154. https://doi.org/10.13073/0015-7473-61.2.149 Dyk, H., & Lemaster, R. L. (2010). An Investigation of the Use of Active Infrared Thermography to Detect Localized Surface Anomalies in Lumber. SCANNING, 32(4), 219–223. https://doi.org/10.1002/sca.20188 Saloni, D. E., Lemaster, R. L., & Jackson, S. D. (2010). Process Monitoring Evaluation and Implementation for the Wood Abrasive Machining Process. SENSORS, 10(11), 10401–10412. https://doi.org/10.3390/s101110401 Lemaster, R. L. (2010). The Use of Frequency and Wavelet Analysis for Monitoring Surface Quality of Wood Machining Applications. SCANNING, 32(4), 224–232. https://doi.org/10.1002/sca.20187 Morales, L., Lemaster, R. L., Jackson, S. D., & Hodgson, T. J. (2009). Determining the economics of new moulder configurations. Forest Products Journal, 59(11-12), 60–66. https://doi.org/10.13073/0015-7473-59.11.60 Jagannadham, K., Watkins, T. R., Lance, M. J., Riester, L., & Lemaster, R. L. (2009). Laser physical vapor deposition of boron carbide films to enhance cutting tool performance. SURFACE & COATINGS TECHNOLOGY, 203(20-21), 3151–3156. https://doi.org/10.1016/j.surfcoat.2009.03.049 Buehlmann, U., Saloni, D., & Lemaster, R. L. (2009). Performance of woodfiber-plastic composites subjected to abrasive machining. Forest Products Journal, 59(6), 61–64. Carrano, A. L., Vora, B. S., Sahin, F., & Lemaster, R. L. (2007). Monitoring of abrasive loading for optimal belt cleaning or replacement. Forest Products Journal, 57(5), 78–83. Saloni, D. E., Lemaster, R. L., & Jackson, S. D. (2005). Abrasive machining process characterization on material removal rate, final surface texture, and power consumption for wood. Forest Products Journal, 55(12), 35–41. Lemaster, R. L., Shih, A. J., & Yu, Z. (2005). Blasting and erosion wear of wood using sodium bicarbonate and plastic media. Forest Products Journal, 55(5), 59–64. Hardin, C. W., Shih, A. J., & Lemaster, R. L. (2004). Diamond wire machining of wood. Forest Products Journal, 54(11), 50–55. Carrano, A. L., Taylor, J. B., Young, R. E., Lemaster, R. L., & Saloni, D. E. (2004). Fuzzy knowledge-based modeling and statistical regression in abrasive wood machining. Forest Products Journal, 54(5), 66–72. Carrano, A. L., Taylor, J. B., & Lemaster, R. L. (2004). Machining-induced subsurface damage of wood. Forest Products Journal, 54(1), 85–91. Clark, W. I., Shih, A. J., Hardin, C. W., Lemaster, R. L., & McSpadden, S. B. (2003). Fixed abrasive diamond wire machining - part I: process monitoring and wire tension force. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 43(5), 523–532. https://doi.org/10.1016/S0890-6955(02)00215-8 Clark, W. I., Shih, A. J., Lemaster, R. L., & McSpadden, S. B. (2003). Fixed abrasive diamond wire machining - part II: experiment design and results. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 43(5), 533–542. https://doi.org/10.1016/S0890-6955(02)00216-X Raghuveer, M. S., Yoganand, S. N., Jagannadham, K., Lemaster, R. L., & Bailey, J. (2002). Improved CVD diamond coatings on WC-Co tool substrates. WEAR, 253(11-12), 1194–1206. https://doi.org/10.1016/S0043-1648(02)00244-2 Mitchell, P. H., & Lemaster, R. L. (2002). Investigation of machine parameters on the surface quality in routing soft maple. Forest Products Journal, 52(6), 85–90. Carrano, A. L., Taylor, J. B., & Lemaster, R. (2002). Parametric characterization of peripheral sanding. Forest Products Journal, 52(9), 44–50. Lemaster, R. L., Lu, L. Y., & Jackson, S. (2000). The use of process monitoring techniques on a CNC wood router. Part 1. Sensor selection. Forest Products Journal, 50(7-8), 31–38. Lemaster, R. L., Lu, L. Y., & Jackson, S. (2000). The use of process monitoring techniques on a CNC wood router. Part 2. Use of a vibration accelerometer to monitor tool wear and workpiece quality. Forest Products Journal, 50(9), 59–64. Taylor, J. B., Carrano, A. L., & Lemaster, R. L. (1999). Quantification of process parameters in a wood sanding operation. Forest Products Journal, 49(5), 41–46. Lewis, V. R., Fouche, C. F., & LeMaster, R. L. (1997). Evaluation of dog assisted searches and electronic odor devices for detecting the western subterranean termite. Forest Products Journal, 47(10), 79–84.