Ronald O Scattergood

Synergistic effect of Nb and Zr additions on the structure-property relationships of nanocrystalline Cu processed by mechanical alloying and hot pressing

JOURNAL OF ALLOYS AND COMPOUNDS, 854.

Dense dispersed shear bands in gradient-structured Ni

INTERNATIONAL JOURNAL OF PLASTICITY, 124, 186–198.

Extra strengthening in a coarse/ultrafine grained laminate: Role of gradient interfaces

INTERNATIONAL JOURNAL OF PLASTICITY, 123, 196–207.

Influence of 1%Nb Solute Addition on the Thermal Stability of In Situ Consolidated Nanocrystalline Cu

ADVANCED ENGINEERING MATERIALS, 21(4).

Effect of oxygen content on thermal stability of grain size for nanocrystalline Fe10Cr and Fe14Cr4Hf alloy powders

JOURNAL OF ALLOYS AND COMPOUNDS, 720, 510–520.

High strength, ductility, and electrical conductivity of in-situ consolidated nanocrystalline Cu-1%Nb

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 711, 350–355.

On the origin and behavior of irradiation-induced c-component dislocation loops in magnesium

ACTA MATERIALIA, 131, 457–466.

Synthesis and characterization of an in situ consolidated nanocrystalline Cu88Al11.5Y0.5 alloy

Journal of Alloys and Compounds, 717, 219–225.

Effects of Microstructure and Processing Methods on Creep Behavior of AZ91 Magnesium Alloy

Journal of Materials Engineering and Performance, 25(9), 3697–3709.

Grain boundary sliding mechanism during high temperature deformation of AZ31 Magnesium alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 669, 171–177.

Dislocation Density Evolution During Creep of AZ31 Mg Alloy: A Study by X-ray Diffraction Line Profile Analysis

Metallography, Microstructure, and Analysis, 4(5), 337–343.

Effect of nano-oxide particle size on radiation resistance of iron-chromium alloys

JOURNAL OF NUCLEAR MATERIALS, 469, 72–81.

Influence of scandium addition on the high-temperature grain size stabilization of oxide-dispersion-strengthened (ODS) ferritic alloy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 636, 565–571.

Long-term stability of 14YT-4Sc alloy at high temperature

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 647, 222–228.

Microstructures and Stabilization Mechanisms of Nanocrystalline Iron-Chromium Alloys with Hafnium Addition

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 46A(9), 4394–4404.

Tensile properties of low-stacking fault energy high-entropy alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 636, 373–378.

Thermodynamic Grain Size Stabilization Models: An Overview

MATERIALS RESEARCH LETTERS, 3(2), 65–75.

High-temperature grain size stabilization of nanocrystalline Fe-Cr alloys with Hf additions

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 613, 289–295.

Influence of Zr and nano-Y2O3 additions on thermal stability and improved hardness in mechanically alloyed Fe base ferritic alloys

JOURNAL OF ALLOYS AND COMPOUNDS, 615, 1013–1018.

Loading Rate-Dependent Mechanical Properties of Bulk Two-Phase Nanocrystalline Al-Pb Alloys Studied by Nanoindentation

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45A(11), 5249–5258.

Nano ZrO2 particles in nanocrystalline Fe-14Cr-1.5Zr alloy powders

JOURNAL OF NUCLEAR MATERIALS, 452(1-3), 434–439.

Size effect of primary Y2O3 additions on the characteristics of the nanostructured ferritic ODS alloys: Comparing as-milled and as-milled/annealed alloys using S/TEM

JOURNAL OF NUCLEAR MATERIALS, 452(1-3), 223–229.

Structural evolution of Cu(1−X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties

Journal of Alloys and Compounds, 627, 108–116.

A predictive model for thermodynamic stability of grain size in nanocrystalline ternary alloys

JOURNAL OF APPLIED PHYSICS, 114(10).

Fracture toughness improvements of dental ceramic through use of yttria-stabilized zirconia (YSZ) thin-film coatings

DENTAL MATERIALS, 29(8), 881–887.

Grain size stability and hardness in nanocrystalline Cu-Al-Zr and Cu-Al-Y alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 598, 217–223.

High temperature stabilization of nanocrystalline grain size: Thermodynamic versus kinetic strategies

JOURNAL OF MATERIALS RESEARCH, 28(13), 1785–1791.

Mechanism of nanostructure formation in ball-milled Cu and Cu–3wt%Zn studied by X-ray diffraction line profile analysis

Journal of Alloys and Compounds, 588, 138–143.

Nanostructure fabrication on germanium and silicon by nanocoining imprint technique

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 37(4), 871–879.

Nature and density of lattice defects in ball milled nanostructured copper

MECHANICS OF MATERIALS, 67, 59–64.

RETRACTED: Fe–Cr–Ni–Zr alloys with bi-modal grain size distribution: Synthesis, mechanical properties and oxidation resistance

Materials Science and Engineering: A, 574, 235–242.

The thermal stability of high-energy ball-milled nanostructured Cu

Materials & Design, 50, 22–26.

Thermal Stability of Nanocrystalline Copper Alloyed with Antimony

Atwater, M. A., Mula, S., Scattergood, R. O., & Koch, C. C. (2013, December). METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 44A, pp. 5611–5616.

Thermal stability and mechanical properties of nanocrystalline Fe-Ni-Zr alloys prepared by mechanical alloying

JOURNAL OF MATERIALS SCIENCE, 48(24), 8402–8411.

Thermal stability of nanocrystalline nickel with yttrium additions

JOURNAL OF MATERIALS RESEARCH, 28(13), 1813–1819.

Thermo-chemical wear model and worn tool shapes for single-crystal diamond tools cutting steel

WEAR, 300(1-2), 216–224.

Thermodynamic stabilization of nanocrystalline binary alloys

JOURNAL OF APPLIED PHYSICS, 113(6).

An in situ experimental study of grain growth in a nanocrystalline Fe91Ni8Zr1 alloy

JOURNAL OF MATERIALS SCIENCE, 48(5), 2251–2257.

Deformation twins and related softening behavior in nanocrystalline Cu-30% Zn alloy

ACTA MATERIALIA, 60(8), 3340–3349.

Effect of annealing on microstructure, grain growth, and hardness of nanocrystalline Fe–Ni alloys prepared by mechanical alloying

Materials Science and Engineering: A, 552, 310–315.

Effect of zirconium on grain growth and mechanical properties of a ball-milled nanocrystalline FeNi alloy

Journal of Alloys and Compounds, 551, 621–629.

Evaluation of mechanical properties of partially amorphous and nanocrystalline Al50Ti40Si10 composites prepared by mechanical alloying and hot isostatic pressing

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 555, 21–27.

Rapid fabrication of nanostructured surfaces using nanocoining

NANOTECHNOLOGY, 23(41).

Studies on thermal stability, mechanical and electrical properties of nano crystalline Cu99.5Zr0.5 alloy

JOURNAL OF ALLOYS AND COMPOUNDS, 558, 44–49.

The stabilization of nanocrystalline copper by zirconium

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 559, 250–256.

The thermal stability of nanocrystalline cartridge brass and the effect of zirconium additions

JOURNAL OF MATERIALS SCIENCE, 48(1), 220–226.

The thermal stability of nanocrystalline copper cryogenically milled with tungsten

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 558, 226–233.

Thermal stability of nanocrystalline Fe-Cr alloys with Zr additions

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 556, 664–670.

Thermodynamic feasibility of solid solubility extension of Nb in Cu and their thermal stability

Materials Science and Engineering: A, 539, 330–336.

Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 529, 230–236.

Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys

ACTA MATERIALIA, 59(14), 5758–5764.

First-principles-based mesoscale modeling of the solute-induced stabilization of < 1 0 0 > tilt grain boundaries in an Al-Pb alloy

First-principles-based mesoscale modeling of the solute-induced stabilization of < 1 0 0 > tilt grain boundaries in an Al-Pb alloy. ACTA MATERIALIA, 59(18), 7022–7028.

Mechanical behavior of bulk nanocrystalline copper alloys produced by high energy ball milling

JOURNAL OF MATERIALS SCIENCE, 46(19), 6316–6322.

Severe deformation twinning in pure copper by cryogenic wire drawing

Acta Materialia, 59(20), 7816–7823.

Stabilized nanocrystalline iron-based alloys: Guiding efforts in alloy selection

Materials Science and Engineering: A, 528(13-14), 4365–4371.

Synthesis, characterization and mechanical behaviour of an in situ consolidated nanocrystalline FeCrNi alloy

Journal of Materials Science, 47(3), 1562–1566.

Creep behavior of ultra-fine grained Zn-4.5Al

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(27-28), 7382–7386.

Creep in nanocrystalline materials: Role of stress assisted grain growth

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(21-22), 5773–5781.

Diamond tool wear measurement by electron-beam-induced deposition

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 34(4), 718–721.

Diamond tool wear when machining Al6061 and 1215 steel

Wear, 268(11-12), 1434–1441.

Elasticity to Atomistics: Predictive Modeling of Defect Behavior Symposium within MMM4 (October 2008) Dedicated to David Bacon PREFACE

PHILOSOPHICAL MAGAZINE, Vol. 90, pp. 803–804.

Nanostructured materials by mechanical alloying: new results on property enhancement

Koch, C. C., Scattergood, R. O., Youssef, K. M., Chan, E., & Zhu, Y. T. (2010, September). JOURNAL OF MATERIALS SCIENCE, Vol. 45, pp. 4725–4732.

Novel technique for the synthesis of ultra-fine porosity metal foam via the inclusion of condensed argon through cryogenic mechanical alloying

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528(4-5), 2192–2195.

Thermal stability of nanocrystalline Fe-Zr alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(15), 3572–3580.

Thermal stability of nanocrystalline Pd81Zr19

ACTA MATERIALIA, 58(12), 4292–4297.

Understanding creep in nanocrystalline materials

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 63(2-3), 373–378.

Computational study of the impurity induced reduction of grain boundary energies in nano- and bi-crystalline Al-Pb alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(7-8), 1769–1775.

Mechanical behavior of bulk ultra-fine-grained Zn-Al die-casting alloys

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 518(1-2), 84–88.

The role of new particle surfaces in synthesizing bulk nanostructured metallic materials by powder metallurgy

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 516(1-2), 270–275.

Atomistic modeling of the segregation of lead impurities to a grain boundary in an aluminum bicrystalline solid

Purohit, Y., Jang, S., Irving, D. L., Padgett, C. W., Scattergood, R. O., & Brenner, D. W. (2008, October 15). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 97–100.

Grain-size stabilization in nanocrystalline FeZr alloys

SCRIPTA MATERIALIA, 59(5), 530–533.

Influence of Pb segregation on the deformation of nanocrystalline Al: Insights from molecular simulations

ACTA MATERIALIA, 56(17), 4750–4761.

Mechanical properties of bulk nanocrystalline aluminum-tungsten alloys

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 39A(10), 2528–2534.

Prediction of Energies of <100> Tilt Boundaries in Al-Pb Alloy

Materials Research Society Symposium Proceedings, 1056E, 1056–HH01-105610.

Self-assembled three-dimensional Cu-Ge nanoweb composite

NANOTECHNOLOGY, 19(13).

Stabilization of nanocrystalline grain sizes by solute additions

Koch, C. C., Scattergood, R. O., Darling, K. A., & Semones, J. E. (2008, December). JOURNAL OF MATERIALS SCIENCE, Vol. 43, pp. 7264–7272.

Strengthening mechanisms in nanocrystalline alloys

Scattergood, R. O., Koch, C. C., Murty, K. L., & Brenner, D. (2008, October 15). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 3–11.

Thermal stability, mechanical and electrical properties of nanocrystalline Cu3Ge

Intermetallics, 16(3), 378–383.

Determination of Activation Volume in Nanocrystalline Cu Using the Shear Punch Test

Advanced Engineering Materials, 9(10), 855–859.

Mechanical behavior of nanocrystalline copper

Materials Science and Engineering: A, 463(1-2), 14–21.

Mechanical properties of electrodeposited nanocrystalline copper using tensile and shear punch tests

JOURNAL OF MATERIALS SCIENCE, 42(14), 5581–5588.

Molecular dynamics simulations of deformation in nanocrystalline Al-Pb alloys

Jang, S., Purohit, Y., Irving, D., Padgett, C., Brenner, D., & Scattergood, R. O. (2008, October 15). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 493, pp. 53–57.

The mechanical behavior of multiphase nanocrystalline materials

JOM, 59(3), 66–70.

Thickness and clearance effects in shear punch testing

ADVANCED ENGINEERING MATERIALS, 9(3), 157–160.

Effect of Pb on the mechanical properties of nanocrystalline Al

SCRIPTA MATERIALIA, 55(2), 155–158.

Finite element analysis of a shear punch test

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 37A(5), 1477–1483.

Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O3

SCRIPTA MATERIALIA, 54(11), 1879–1883.

Shear punch tests for a bulk metallic glass

INTERMETALLICS, 14(12), 1411–1416.

Ball indentation tests for a Zr-based bulk metallic glass

SCRIPTA MATERIALIA, 53(12), 1461–1465.

Breakthroughs in Optimization of Mechanical Properties of Nanostructured Metals and Alloys

Advanced Engineering Materials, 7(9), 787–794.

Breakthroughs in optimization of mechanical properties of nanostructured metals and alloys

Advanced Engineering Materials, 7(9), 787–794.

Consolidation of a Cu-2.5 vol.% Al2O3 powder using high energy mechanical milling

Zhang, D. L., Raynova, S., Koch, C. C., Scattergood, R. O., & Youssef, K. M. (2005, November 25). MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 410, pp. 375–380.

Effect of annealing temperature on texture and creep anisotropy in Ti3Al2.5V alloy

In Textures of materials: ICOTOM 14: Proceedings of the 14th International Conference on Textures of Materials, held in Leuven, Belgium, July 11-15, 2005 / Paul van Houtte; Leo Kestens. Uetikon-Zuerich, Switzerland ; Enfield, NH: Trans Tech Publications, 2005. (Materials science forum ; 495-497) (Vol. 495-497, pp. 1645–1650).

Evaluation of mechanical properties using shear–punch testing

Materials Science and Engineering: A, 395(1-2), 307–314.

Nanocrystalline Al-Mg alloy with ultrahigh strength and good ductility

SCRIPTA MATERIALIA, 54(2), 251–256.

Ultrahigh strength and high ductility of bulk nanocrystalline copper

APPLIED PHYSICS LETTERS, 87(9).

Abrasive micro-blasting to improve surface integrity of electrical discharge machined WC-Co composite

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 166(3), 440–448.

Chip formation, cutting forces, and tool wear in turning of Zr-based bulk metallic glass

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 44(9), 915–925.

Light emission, chip morphology, and burr formation in drilling the bulk metallic glass

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 45(7-8), 741–752.

Oxidation and crystallization of Zr-based bulk metallic glass due to machining

Intermetallics, 12(2), 195–204.

Thrust force, torque, and tool wear in drilling the bulk metallic glass

International Journal of Machine Tools and Manufacture, 45(7-8), 863–872.

Ultratough nanocrystalline copper with a narrow grain size distribution

APPLIED PHYSICS LETTERS, 85(6), 929–931.

Cost-effective grinding of zirconia using the dense vitreous bond silicon carbide wheel

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 125(2), 297–303.

Finite-element analysis of stress concentration in ASTM D 638 tension specimens

Journal of Testing and Evaluation, 31(1), 52–57.

Grinding temperature measurements in magnesia-partially-stabilized zirconia using infrared spectrometry

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 86(2), 333–341.

Machining of a Zr-Ti-Al-Cu-Ni metallic glass

SCRIPTA MATERIALIA, 50(5), 583–588.

Mechanical properties of Nylon bonded Nd-Fe-B permanent magnets

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 257(1), 32–43.

Mechanical properties of polyphenylene-sulfide (PPS) bonded NdFe-B permanent magnets

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 359(1-2), 375–383.

Oxidation and crystallization of Zr-based bulk metallic glass due to machining

Intermetallics, 12(2), 195–204.

Synthesis of bulk nanostructured Zn by combinations of cryomilling and powder consolidation by room temperature milling: optimizing mechanical properties

SCRIPTA MATERIALIA, 49(5), 429–433.

Development of the cylindrical wire electrical discharge machining process, part 1: Concept, design, and material removal rate

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 124(3), 702–707.

Development of the cylindrical wire electrical discharge machining process, part 2: Surface integrity and roundness

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 124(3), 708–714.

Evolution of microstructure and mechanical properties of in situ consolidated bulk ultra-fine-grained and nanocrystalline Zn prepared by ball milling

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 344(1-2), 175–181.

Mechanical properties of cyromilled nanocrystalline Zn studied by the miniaturized disk bend test

ACTA MATERIALIA, 50(13), 3527–3533.

Modulated oscillatory hardening and dynamic recrystallization in cryomilled nanocrystalline Zn

ACTA MATERIALIA, 50(16), 3995–4004.

Nanoindentation characterization of surface layers of electrical discharge machined WC-Co

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 344(1-2), 125–131.

Studies of deformation mechanisms in ultra-fine-grained and nanostructured Zn

ACTA MATERIALIA, 50(19), 4823–4830.

Tensile elongation (110%) observed in ultrafine-grained Zn at room temperature

APPLIED PHYSICS LETTERS, 81(5), 823–825.

Wear mechanism of metal bond diamond wheels trued by wire electrical discharge machining

WEAR, 252(7-8), 644–653.