S M Fijul Kabir

Sustainable Textile Processing, 3D Printed Composites, Smart Textile, Clothing Comfort

Works (27)

Updated: April 5th, 2024 11:45

2022 journal article

Sustainable Natural Printing of Cotton Fabric Without Metal-Based Mordant

Journal of Natural Fibers.

By: B. Mondal*, S. Kabir*, A. Ali* & M. Hannan*

author keywords: Sustainable; natural printing; mordant; metal; cotton fabric; natural thickener
Source: ORCID
Added: September 26, 2022

2022 journal article

Tensile properties of 3D printed continuous fiberglass reinforced cellular composites

The Journal of The Textile Institute, 12, 1–10.

By: K. Mathur*, S. Kabir* & A. Seyam*

author keywords: 3D printing; continuous fiber reinforced composites; cellular geometry; tensile properties
UN Sustainable Development Goal Categories
Source: ORCID
Added: December 23, 2020

2021 article

A Mini Review on the Innovations in Sizing of Cotton

Kabir, S. M. F., & Haque, S. (2021, July 30). JOURNAL OF NATURAL FIBERS, Vol. 7.

By: S. Kabir n & S. Haque*

author keywords: Cotton; sizing; size-free weaving; innovation; sizing agent; sizing machine
Sources: ORCID, Web Of Science, NC State University Libraries
Added: July 30, 2021

2021 journal article

Adsorption Characteristics of Banana Peel in the Removal of Dyes from Textile Effluent

Textiles, 1(2), 361–375.

By: M. Akter*, F. Rahman*, M. Abedin* & S. Kabir n

UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: ORCID
Added: September 13, 2021

2021 review

Cellulose-Based Hydrogels for Wastewater Treatment: A Concise Review

[Review of ]. GELS, 7(1).

By: M. Akter*, M. Bhattacharjee*, A. Dhar*, F. Rahman*, S. Haque*, T. Rashid n, S. Kabir n

author keywords: wastewater; heavy metal; dye; hydrogel; cellulose
TL;DR: This study summarizes various process parameters necessary to optimize adsorption capacity followed by future research directions and emphasizes different CBH adsorbents in the context of dyes and heavy metals removal from wastewater following diverse synthesis techniques and adsorbent mechanisms. (via Semantic Scholar)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: March 23, 2021

2021 journal article

Comparing Performance of 3D-Printed and Injection-Molded Fiber-Reinforced Composite Parts in Ring-Spinning Traveler Application

TECHNOLOGIES, 9(4).

By: S. Kabir n, K. Mathur n & A. Seyam n

author keywords: 3D printing; fiber-reinforced composites; ring-spinning traveler; wear and abrasion; surface finish; Nylon
TL;DR: The results demonstrated that fiber-reinforced 3DP is a promising technology that offers a lot of flexibility regarding reinforcement patterns and materials including both short and continuous fibers to tailor the performance, although the printed travelers showed poorer surface characteristics and wear resistance than the molded travelers. (via Semantic Scholar)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: October 14, 2021

2021 journal article

Hyaluronate macromolecules assist bioreduction (AuIII to Au0) and stabilization of catalytically active gold nanoparticles for azo contaminated wastewater treatment

Environmental Technology & Innovation, 24, 102053.

By: Y. Xiong*, H. Wan*, M. Islam*, W. Wang*, L. Xie*, S. Lü*, S. Kabir*, H. Liu*, S. Mahmud*

author keywords: Sodium hyaluronate; Gold nanocatalyst; Wastewater treatment
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: ORCID
Added: October 29, 2021

2021 journal article

Hyaluronate macromolecules reduced-stabilized colloidal palladium nanocatalyst for azo contaminated wastewater treatment

Colloids and Surfaces A: Physicochemical and Engineering Aspects, 628, 127345.

By: Z. Wang*, S. Lü*, F. Yang*, S. Kabir*, S. Mahmud* & H. Liu*

author keywords: Biogenic synthesis; Sodium hyaluronate; Palladium nanocatalyst; Wastewater treatment; Azo-dye degradation
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: ORCID
Added: August 12, 2021

2021 journal article

Maximizing the Performance of 3D Printed Fiber-Reinforced Composites

JOURNAL OF COMPOSITES SCIENCE, 5(5).

By: S. Kabir n, K. Mathur n & A. Seyam n

author keywords: fiber volume fraction; 3D printing; fiber-reinforced composites; fiber orientations; tensile properties; impact resistance; failure mechanism
UN Sustainable Development Goal Categories
14. Life Below Water (OpenAlex)
Sources: ORCID, Web Of Science, NC State University Libraries
Added: May 21, 2021

2020 journal article

A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties

Composite Structures, 232, 111476.

By: S. Kabir n, K. Mathur n & A. Seyam n

author keywords: 3D printing; Continuous fiber; Composites; Mechanism; Microstructure; Mechanical properties
UN Sustainable Development Goal Categories
Sources: ORCID, Crossref, NC State University Libraries
Added: November 18, 2019

2020 journal article

Impact resistance and failure mechanism of 3D printed continuous fiber-reinforced cellular composites

The Journal of The Textile Institute, 6, 1–15.

By: S. Kabir n, K. Mathur n & A. Seyam n

author keywords: 3D printing; continuous fiber-reinforced composites; lightweight cellular structure; impact resistance; failure mechanism
UN Sustainable Development Goal Categories
Sources: ORCID, Crossref, NC State University Libraries
Added: June 23, 2020

2020 journal article

Predicting fashion trend using runway images: application of logistic regression in trend forecasting

International Journal of Fashion Design, Technology and Education, 13(3), 376–386.

By: S. Chakraborty n, S. Hoque n & S. Kabir n

TL;DR: This research presented an approach to predict pattern and outfit based on the images collected from New York Fashion Week Fall/Winter 2019 (NYFW-19) Instagram posts, using logistic regression, which predicted the patterns that could be used by retailers in the coming season for mass-market consumers. (via Semantic Scholar)
Source: ORCID
Added: October 13, 2020

2020 journal article

Sustainable Wastewater Treatment via Dye-Surfactant Interaction: A Critical Review

Industrial & Engineering Chemistry Research, 59(21), 9719–9745.

By: T. Rashid n, S. Kabir n, M. Biswas n & M. Bhuiyan*

Contributors: T. Rashid n, S. Kabir n, M. Biswas n & M. Bhuiyan*

UN Sustainable Development Goal Categories
Source: ORCID
Added: April 30, 2020

2020 journal article

The Road to Improved Fiber-Reinforced 3D Printing Technology

Technologies, 8(4), 51.

By: S. Kabir n, K. Mathur n & A. Seyam n

author keywords: 3D printing; fiber-reinforced composites; fiber filament; plastic filament; slicing software; design flexibility; fused deposition modeling
TL;DR: Fiber and polymer filaments used by the commercial 3D printers to develop fiber-reinforced composites are characterized to discover the unknown manufacturing specifications such as fiber–polymer distribution and fiber volume fraction that have direct practical implications in determining and tuning composites’ properties and their applications. (via Semantic Scholar)
Sources: ORCID, Crossref, NC State University Libraries
Added: September 28, 2020

2019 journal article

Chemical-Free Scouring and Bleaching of Cotton Knit Fabric for Optimum Dyeing Performance

Clothing and Textiles Research Journal.

S M Fijul Kabir

author keywords: chemical-free cotton scouring and bleaching; CMC Delta E; color fastness; enhanced stability
Source: ORCID
Added: November 18, 2019

2019 journal article

Gelation of Textile Dye Solution Treated with Fish Scales

GELS, 5(3).

By: S. Kabir n, T. Rashid n & I. Negulescu*

author keywords: fish scales; dye solution; gel; rheology
TL;DR: The commercial value of fish scales (FS), one of the most discarded fish wastes, has been identified by discovering their gelation capability by finding that pristine FS showed better gelation efficacy compared to pulverized FS. (via Semantic Scholar)
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Sources: Web Of Science, ORCID, NC State University Libraries
Added: October 14, 2019

2019 journal article

Removal of Acid Dyes from Textile Wastewaters Using Fish Scales by Absorption Process

Clean Technologies.

By: S. Kabir n, R. Cueto*, S. Balamurugan*, L. Romeo*, J. Kuttruff*, B. Marx*, I. Negulescu*

author keywords: fish scales (FS); anionic dyes; dye absorption and adsorption; collagen; dye removal
Source: ORCID
Added: November 18, 2019

2019 journal article

Sustainability Assessment of Cotton-Based Textile Wet Processing

Clean Technologies, 1(1), 232–246.

By: S. Kabir n, S. Chakraborty n, S. Hoque n & K. Mathur n

author keywords: sustainability; textile wet processing; triple bottom line (TBL); environment; economy; society
UN Sustainable Development Goal Categories
9. Industry, Innovation and Infrastructure (OpenAlex)
Sources: ORCID, Crossref, NC State University Libraries
Added: November 18, 2019

2018 journal article

Cellulose-based hydrogel materials: chemistry, properties and their prospective applications

Progress in Biomaterials, 7(3), 153–174.

By: S. Kabir*, P. Sikdar*, B. Haque*, M. Bhuiyan*, A. Ali* & M. Islam*

author keywords: Hydrogels; Cellulose; Chitin; Chitosan; Smart material; Biomedical applications
TL;DR: An overview of the recent and contemporary research regarding physiochemical properties of cellulose-based hydrogels along with their applications in multidisciplinary areas including biomedical fields such as drug delivery, tissue engineering and wound healing, healthcare and hygienic products as well as in agriculture, textiles and industrial applications as smart materials. (via Semantic Scholar)
Source: ORCID
Added: November 18, 2019

2018 journal article

Characterization of Waste Bamboo Strips Underscoring Node Effects

S M Fijul Kabir

Source: ORCID
Added: November 18, 2019

2018 journal article

Coloration of polyester fiber with natural dye henna (Lawsonia inermis L.) without using mordant: a new approach towards a cleaner production

S M Fijul Kabir

author keywords: Polyester fiber; Natural dye; Henna leaves; Eco-friendly dyeing; Cleaner production
Source: ORCID
Added: November 18, 2019

2018 conference paper

Fishy Finery

2018 ITAA Annual Conference Proceedings: Design Presentations. Presented at the Cleveland, OH, USA. https://lib.dr.iastate.edu/itaa_proceedings/2018/design/13/

By: C. Stannard & S. Kabir

Event: at Cleveland, OH, USA on November 6-9, 2018

Sources: ORCID, NC State University Libraries
Added: November 18, 2019

2018 journal article

Scope of Sustainable Pretreatment of Cotton Knit Fabric Avoiding Major Chemicals

S M Fijul Kabir

author keywords: Scouring and bleaching without NaOH and H2O2; 105 degrees C temperature; 20 min duration; CMC increment E; color fastness; cotton
Source: ORCID
Added: November 18, 2019

2016 journal article

Effect of woven fabric structure on dimensional stability- a lead time saving approach for the sustainability of Bangladeshi woven industries

Society & Change, X(1), 73–81. http://societyandchange.com/uploads/1509605244.pdf

By: S. Sheikh, S. Kabir, M. Hannan & A. Khan

Source: ORCID
Added: November 18, 2019

2014 journal article

EFFECT OF YARN COUNT & STITCH LENGTH ON SHRINKAGE, GSM AND SPIRALITY OF SINGLE JERSY COTTON KNIT FABRIC

EFFECT OF YARN COUNT & STITCH LENGTH ON SHRINKAGE, GSM AND SPIRALITY OF SINGLE JERSY COTTON KNIT FABRIC. European Scientific Journal, ESJ, 10(36).

By: M. Hannan, M. Islam, S. Kabir, A. Kafi & S. Sheikh

Source: ORCID
Added: November 18, 2019

2014 journal article

Optimization of parameters of cotton fabric whiteness

European Scientific Journal, ESJ, 10(36).

By: S. Kabir, M. Iqbal, P. Sikdar, M. Rahman & S. Akhter

Source: ORCID
Added: November 18, 2019

journal article

Scope of Knit Denim Products Using Reactive Dye and Convenient Washing Effects

Hannan, M. A., Sheikh, S., Kabir, S. M. F., Hossain, M. A., & Rouf, M. A.

By: M. Hannan, S. Sheikh, S. Kabir, M. Hossain & M. Rouf

Source: ORCID
Added: November 18, 2019

Employment

Updated: June 2nd, 2020 06:52

2014 - present

BGMEA University of Fashion and Technology Dhaka, Dhaka District, BD
Lecturer Textile Engineering

2018 - 2021

North Carolina State University Raleigh, NC, US
Graduate Research and Teaching Assistant Wilson College of Textiles

2016 - 2018

Louisiana State University Baton Rouge, LA, US
Graduate Teaching Assistant Textiles, Apparel Design & Merchandising

2016 - 2016

Textile Engineering College Chittagong, BD
Guest Teacher Textile

2013 - 2014

Shanto Mariam University of Creative Technology Dhaka, Dhaka District, BD
Lecturer Fashion Design and Technology

2013 - 2013

Amazing Fashion Ltd Gazipur, BD
Production Officer Research and Development

2013 - 2013

Knit Concern Ltd Narayanganj, BD
Intern Textile

Education

Updated: December 11th, 2019 00:10

2018 - present

North Carolina State University Raleigh, NC, US
PhD in Fiber and Polymer Science Textile Engineering, Chemistry and Science

2016 - 2018

Louisiana State University Baton Rouge, LA, US
MS in Textiles with Major in Textile Science and Minor in Applied Statistics Textiles, Apparel Design and Merchandizing

2008 - 2013

University of Chittagong Chittagong, BD
BS in Textile Engineering Faculty of Science

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.