Stephen S Kelley

Effective toluene removal from aqueous solutions using fast pyrolysis-derived activated carbon from agricultural and forest residues: Isotherms and kinetics study

HELIYON, 9(5).

Environmental Life Cycle Assessment of Premium and Ultra Hygiene Tissue Products in the United States

BIORESOURCES, 18(2), 4006–4031.

Green Needle Coke Production from Pyrolysis Biocrude toward Bio-based Anode Material Manufacture: Biochar Fines Addition Effect as ?Physical Template? on the Crystalline Order

ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 11(18), 6944–6955.

Production of single-component cellulose-based hydrogel and its utilization as adsorbent for aqueous contaminants

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, 243.

At-Line Sampling and Characterization of Pyrolytic Vapors from Biomass Feedstock Blends Using SPME-GC/MS-PCA: Influence of Char on Fast Pyrolysis

Molina, E. A. R., Soneja, R., Diaz, M. H., Tilotta, D. C., & Kelley, S. S. (2022, December 5). JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY, Vol. 12.

Dual-Templating Approach for Engineering Strong, Biodegradable Lignin-Based Foams

Trovagunta, R., Kelley, S. S., & Lavoine, N. (2022, November 8). ACS SUSTAINABLE CHEMISTRY & ENGINEERING, Vol. 11.

Environmental full cost accounting of alternative materials used for railroad ties: Treated-wood and concrete case study

JOURNAL OF CLEANER PRODUCTION, 364.

Life cycle assessment of utilizing freshly cut urban wood: A case study

URBAN FORESTRY & URBAN GREENING, 76.

Rethinking the use of bio-based plastics to accelerate the decarbonization of our society

Resources, Conservation and Recycling, 186, 106593.

An eco-friendly approach for blending of fast-pyrolysis bio-oil in petroleum-derived fuel by controlling ash content of loblolly pine

RENEWABLE ENERGY, 179, 2063–2070.

Dynamic life-cycle carbon analysis for fast pyrolysis biofuel produced from pine residues: implications of carbon temporal effects

BIOTECHNOLOGY FOR BIOFUELS, 14(1).

Highlights on the mechanical pre-refining step in the production of wood cellulose nanofibrils

Trovagunta, R., Kelley, S. S., & Lavoine, N. (2021, October 27). CELLULOSE, Vol. 10.

Techno-Economic Analysis of decentralized preprocessing systems for fast pyrolysis biorefineries with blended feedstocks in the southeastern United States

RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 143.

Techno-economic analysis of producing xylo-oligosaccharides and cellulose microfibers from lignocellulosic biomass

BIORESOURCE TECHNOLOGY, 340.

Techno-economic analysis of sugar production from lignocellulosic biomass with utilization of hemicellulose and lignin for high-value co-products

BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, 15(2), 404–415.

COMPARATIVE LIFE-CYCLE ASSESSMENT OF A MASS TIMBER BUILDING AND CONCRETE ALTERNATIVE

WOOD AND FIBER SCIENCE, 52(2), 217–229.

Evaluating Sustainable Product Alternatives by Combining Life Cycle Assessment with Full-cost Accounting: A Highway Guardrail Case Study

BIORESOURCES, 15(4), 9103–9127.

Fungal Pretreatment and Enzymatic Hydrolysis of Genetically-modified Populus trichocarpa

BIORESOURCES, 15(3), 6488–6505.

Keeping up with the fast-moving world of crisis management

Rice, C. W., Schoen, R., Aristidou, A., Burgess, S. C., Capalbo, S., Czarnecki-Maulden, G., … Sample, V. A. (2020, September). AGRICULTURE AND HUMAN VALUES, Vol. 37, pp. 531–533.

Regional and net economic impacts of high-rise mass timber construction in Oregon

SUSTAINABLE CITIES AND SOCIETY, 61.

ANATOMICAL, PHYSICAL, AND MECHANICAL PROPERTIES OF TRANSGENIC LOBLOLLY PINE (PINUS TAEDA L.) MODIFIED FOR INCREASED DENSITY

WOOD AND FIBER SCIENCE, 51(2), 173–182.

Alkaline extraction and characterization of residual hemicellulose in dissolving pulp

CELLULOSE, 26(2), 1323–1333.

Anatomy and Chemistry of Populus trichocarpa with Genetically Modified Lignin Content

BIORESOURCES, 14(3), 5729–5746.

Science Breakthroughs to Advance Food and Agricultural Research by 2030

In SCIENCE BREAKTHROUGHS TO ADVANCE FOOD AND AGRICULTURAL RESEARCH BY 2030 (pp. 1–228).

Testing of anisole and methyl acetate as additives to diesel and biodiesel fuels in a compression ignition engine

FUEL, 246, 79–92.

Thermo-mechanical Behavior of Genetically Modified Populus trichocarpa

BIORESOURCES, 14(2), 4760–4773.

Blended Feedstocks for Thermochemical Conversion: Biomass Characterization and Bio-Oil Production From Switchgrass-Pine Residues Blends

FRONTIERS IN ENERGY RESEARCH, 6.

Correlation between solubility parameters and recovery of phenolic compounds from fast pyrolysis bio-oil by diesel extraction

Carbon Resources Conversion, 1(3), 238–244.

Graphitization Behavior of Loblolly Pine Wood Investigated by in Situ High Temperature X-ray Diffraction

ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 6(7), 9113–9119.

Impacts of feedstock properties on the process economics of fast-pyrolysis biorefineries

BIOFUELS BIOPRODUCTS & BIOREFINING-BIOFPR, 12(3), 442–452.

Structural Characterization of Loblolly Pine Derived Biochar by X-ray Diffraction and Electron Energy Loss Spectroscopy

ACS Sustainable Chemistry & Engineering, 6(2), 2621–2629.

Techno‐economic analysis of various biochemical conversion platforms for biosugar production: Trade‐offs of co‐producing biopower versus pellets for either a greenfield, repurpose, or co‐location siting context

Biofuels, Bioproducts and Biorefining, 12(3), 390–411.

Understanding the Impacts of Biomass Blending on the Uncertainty of Hydrolyzed Sugar Yield from a Stochastic Perspective

ACS Sustainable Chemistry & Engineering, 6(8), 10851–10860.

Analysis of North Carolina Forest Industry Earnings: Adapting Household-Level Data from the American Community Survey to a Social Accounting Matrix

Journal of Forestry, 116(2), 101–108.

Characterization and enzymatic hydrolysis of wood from transgenic Pinus taeda engineered with syringyl lignin or reduced lignin content

CELLULOSE, 24(4), 1901–1914.

E-beam irradiation & steam explosion as biomass pretreatment, and the complex role of lignin in substrate recalcitrance

E-beam irradiation & steam explosion as biomass pretreatment, and the complex role of lignin in substrate recalcitrance. Biomass and Bioenergy, 103, 21–28.

Effect of blending ratio of loblolly pine wood and bark on the properties of pyrolysis bio-oils

FUEL PROCESSING TECHNOLOGY, 167, 43–49.

Evaluating Sustainability of Buildings Using Multi-Attribute Decision Tools

[Review of ]. FOREST PRODUCTS JOURNAL, 67(3-4), 179–189.

Risk management consideration in the bioeconomy

Biofuels, Bioproducts and Biorefining, 11(3), 549–566.

Steam torrefaction of Eucalyptus globulus for producing black pellets: A pilot-scale experience

Bioresource Technology, 238, 194–204.

Systematic Review of Torrefied Wood Economics

BIORESOURCES, 12(3), 6868–6884.

Dynamic greenhouse gas accounting for cellulosic biofuels: implications of time based methodology decisions

The International Journal of Life Cycle Assessment, 22(5), 812–826.

Environmental LCA and Financial Analysis to Evaluate the Feasibility of Bio-based Sugar Feedstock Biomass Supply Globally: Part 2. Application of Multi-Criteria Decision-Making Analysis as a Method for Biomass Feedstock Comparisons

BioResources, 11(3), 6062–6084.

Lignin-Based Thermoplastic Materials

ChemSusChem, 9(8), 770–783.

Multi‐attribute uncertainty analysis of the life cycle of lignocellulosic feedstock for biofuel production

Biofuels, Bioproducts and Biorefining, 11(2), 269–280.

Public perception of bioenergy in North Carolina and Tennessee

ENERGY SUSTAINABILITY AND SOCIETY, 6.

Use of linear programming to -optimize the social, −environmental, and economic impacts of using woody feedstocks for pellet and -torrefied pellet production

Biofuels, Bioproducts and Biorefining, 10(4), 446–461.

Determination of molecular weight distributions in native and pretreated wood

Carbohydrate Polymers, 119, 44–52.

Environmental LCA and financial analysis to evaluate the feasibility of bio-based sugar feedstock biomass supply globally: Part 1. supply chain analysis

BioResources, 10(4), 8098–8134.

Environmental impacts of bioethanol using the NREL biochemical conversion route: multivariate analysis and single score results

Biofuels, Bioproducts and Biorefining, 9(5), 484–500.

Environmental life cycle impacts of cellulosic ethanol in the Southern U.S. produced from loblolly pine, eucalyptus, unmanaged hardwoods, forest residues, and switchgrass using a thermochemical conversion pathway

Fuel Processing Technology, 138, 164–174.

Refining of Ethanol Biorefinery Residues to Isolate Value Added Lignins

ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 3(7), 1632–1641.

Systematic review of bioenergy perception studies

BioResources, Vol. 10, pp. 8770–8794.

The NREL biochemical and thermochemical ethanol conversion processes: Financial and environmental analysis comparison

BioResources, 10(3), 5096–5116.

Thermal and Storage Stability of Bio-Oil from Pyrolysis of Torrefied Wood

ENERGY & FUELS, 29(8), 5117–5126.

Wood Extractives Promote Cellulase Activity on Cellulosic Substrates

Biomacromolecules, 16(10), 3226–3234.

Economics, environmental impacts, and supply chain analysis of cellulosic biomass for biofuels in the Southern US: pine, eucalyptus, unmanaged hardwoods, forest residues, switchgrass, and sweet sorghum

BioResources, 9(1), 393–444.

Identification of free radicals in pyrolysis oil and their impact on bio-oil stability

RSC ADVANCES, 4(56), 29840–29846.

Integrated conversion, financial, and risk modeling of cellulosic ethanol from woody and non-woody biomass via dilute acid pre-treatment

Biofuels, Bioproducts and Biorefining, 8(6), 755–769.

Supply Chain Analysis, Delivered Cost, and Life Cycle Assessment of Oil Palm Empty Fruit Bunch Biomass for Green Chemical Production in Malaysia

BioResources, 9(3), 5385–5416.

Toward Understanding of Bio-Oil Aging: Accelerated Aging of Bio-Oil Fractions

ACS Sustainable Chemistry & Engineering, 2(8), 2011–2018.

Bicomponent Lignocellulose Thin Films to Study the Role of Surface Lignin in Cellulolytic Reactions

BIOMACROMOLECULES, 13(10), 3228–3240.

Co-production of electricity and ethanol, process economics of value prior combustion

Energy Conversion and Management, 62, 141–153.

Distribution of wood polymers within the cell wall of transgenic aspen imaged by Raman microscopy

HOLZFORSCHUNG, 66(6), 717–725.

Effect of hemicellulose extraction on physical and mechanical properties and mold susceptibility of flakeboard

Forest Products Journal, 61(1), 31–37.

Ultrathin film coatings of aligned cellulose nanocrystals from a convective-shear assembly system and their surface mechanical properties

Soft Matter, 7(5), 1957.

Use of transmittance near-infrared spectroscopy to predict the mechanical properties of 1-and 2-year-old transgenic aspen

WOOD SCIENCE AND TECHNOLOGY, 45(2), 303–314.

Development of Langmuir-Schaeffer Cellulose Nanocrystal Monolayers and Their Interfacial Behaviors

LANGMUIR, 26(2), 990–1001.

Biomimetic oxidative treatment of spruce wood studied by pyrolysis-molecular beam mass spectrometry coupled with multivariate analysis and C-13-labeled tetramethylammonium hydroxide thermochemolysis: implications for fungal degradation of wood

JOURNAL OF BIOLOGICAL INORGANIC CHEMISTRY, 14(8), 1253–1263.

FTIR imaging coupled with multivariate analysis for study of initial diffusion of different solvents in cellulose acetate butyrate films

CELLULOSE, 15(1), 23–33.

Two-dimensional homo- and hetero-correlation technique applied to NIR and py-MBMS spectra of wood

Holzforschung, 62(2), 176–182.

Correlation of near-infrared spectroscopy measurements with the properties of treated wood

Journal of Materials in Civil Engineering, 19(4), 279–285.

High-throughput material characterization techniques: near infrared and laser-induced breakdown spectroscopy

ACS Symposium Series 954, (Materials, Chemicals, and Energy from Forest Biomass), 495–512.

Lignocellulosic biorefineries: reality, hype, or something in between?

ACS Symposium Series 954, (Materials, Chemicals, and Energy from Forest Biomass), 31–47.

Nanoindentation of wood cell walls: Continuous stiffness and hardness measurements

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 38(3), 945–953.

Synthesis and characterization of dense and porous cellulose films

JOURNAL OF APPLIED POLYMER SCIENCE, 105(3), 1228–1236.

nonleachable composition and method to use

Geneva: World Intellectual Property Organization (WIPO).

Analytical tools to predict changes in properties of oriented strandboard exposed to the fungus Postia placenta

HOLZFORSCHUNG, 60(3), 332–338.

Assessment of wood load condition by near infrared (NIR) spectroscopy

JOURNAL OF MATERIALS SCIENCE, 41(7), 1879–1886.

FTIR Imaging of wood and wood composites

CHARACTERIZATION OF THE CELLULOSIC CELL WALL, pp. 110-+.

FT-IR imaging and pyrolysis-molecular beam mass spectrometry: new tools to investigate wood tissues

WOOD SCIENCE AND TECHNOLOGY, 39(1), 61–U19.

Nongovernmental valorization of carbon dioxide

[Review of ]. SCIENCE OF THE TOTAL ENVIRONMENT, 338(3), 159–182.

Blends of cellulose ester/phenolic polymers - chemical and thermal properties of blends with polyvinyl phenol

CELLULOSE, 11(2), 225–237.

Determination of Wood Properties Using Near Infrared Sprectroscopy

Structures 2004. Presented at the Structures Congress 2004.

Effects of synthesis conditions on the pervaporation properties of poly[1-(trimethylsilyl)-1-propyne] useful for membrane bioreactors

JOURNAL OF APPLIED POLYMER SCIENCE, 91(4), 2271–2277.

Latex quantification in homogenate and purified latex samples from various plant species using near infrared reflectance spectroscopy

INDUSTRIAL CROPS AND PRODUCTS, 19(3), 283–296.

Measuring the chemical composition of agricultural fibers with near infrared spectroscopy and pyrolysis molecular beam mass spectrometry

Biomass and Bioenergy, 27, 77–88.

Near infrared spectroscopy in the forest products industry

Forest Products Journal, 54(3), 6–11.

Rapid analysis of the chemical composition of agricultural fibers using near infrared spectroscopy and pyrolysis molecular beam mass spectrometry

Biomass and Bioenergy, 27(1), 77–88.

Use of near infrared spectroscopy to measure the chemical and mechanical properties of solid wood

WOOD SCIENCE AND TECHNOLOGY, 38(4), 257–276.

Use of near infrared spectroscopy to predict the mechanical properties of six softwoods

HOLZFORSCHUNG, 58(3), 252–260.

Effect of yeast fermentation by-products on poly[1-(trimethylsilyl)-1-propyne] pervaporative performance

JOURNAL OF MEMBRANE SCIENCE, 214(2), 229–238.

Method for predicting dry mechanical properties from wet wood and standing trees

Washington, DC: U.S. Patent and Trademark Office.

Method of predicting mechanical properties of decayed wood

Washington, DC: U.S. Patent and Trademark Office.

Use of a region of the visible and near infrared spectrum to predict mechanical properties of wet wood and standing trees

Washington, DC: U.S. Patent and Trademark Office.

Chemical modification of cellulose acetate with titanium isopropoxide

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 7(1-2), 162–180.

Rapid analysis tools for measuring the chemical composition of biomass

Proceedings of The Sixth Pacific Rim Bio-Based Composites Symposium.

Rapid assessment of softwood properties with near infrared spectroscopy

Proceedings of The Sixth Pacific Rim Bio-Based Composites Symposium.

Rapid assessment of the fundamental property variation of wood

Proceedings of the 11th Biennial Southern Silvicultural Research Conference, 11, 176–180. Ashville, NC: USDA Forest Serivice Southern Research Station.

The application of pyrolysis molecular beam mass spectrometry for characterization of bark phenolysis products

Biomass and Bioenergy, 22, 411–419.

Use of NIR and pyrolysis-MBMS coupled with multivariate analysis for detecting the chemical changes associated with brown-rot biodegradation of spruce wood

FEMS MICROBIOLOGY LETTERS, 209(1), 107–111.

Use of a region of the visible and near infrared spectrum to predict mechanical properties of wet wood and standing trees

Geneva: World Intellectual Property Organization (WIPO).

Use of advanced spectroscopic techniques for predicting the mechanical properties of wood composites

Wood and Fiber Science, 34(3), 398–407.

Bio-oils as a s source of phenolics for production of resol wood resins

In A. F. F. T. Silva & T. C. B. Paiva (Eds.), Brazilian Symposium on the Chemistry of Lignins and Other Wood Components, 6th Proceeding (pp. 40–44).

Extraction of butanol from aqueous solutions by pervaporation through poly(1-trimethylsilyl-1-propyne)

JOURNAL OF MEMBRANE SCIENCE, 186(2), 205–217.

Hydrothermal degradation study of phenolic polymer coatings by advanced analytical methods

JOURNAL OF COATINGS TECHNOLOGY, 73(917), 65–71.

Influence of the reactivity and functionality of phenolic model compounds on network formation reactions

Chemicals and Materials from Renewable Resources (ACS Symposium Series 784), 174–190.

A new technique for the simultaneous, real-time measurement of membrane compaction and performance during exposure to high-pressure gas

Journal of Membrane Science, 171(2), 217–228.

Fouling of poly[-1-(trimethylsilyl)-1-propyne] membranes in pervaporative recovery of butanol from aqueous solutions and ABE fermentation broth

JOURNAL OF MEMBRANE SCIENCE, 173(1), 133–144.

The tensile properties of molding products obtained by the condensation of various tree barks and phenol by using sulfuric acid as a catalyst

JOURNAL OF MATERIALS SCIENCE LETTERS, 19(17), 1517–1520.

The thermal stability of novolac-type thermosets made by the condensation of bark and phenol

Polymer Degradation and Stability, 68, 413.

Application of the slow pyrolysis eucalyptus oil to make PF resins

In R. P. Overend & E. Chornet (Eds.), Biomass: A Growth Opportunity in Green Energy and Value-Added Products; Proceedings of the Fourth Biomass Conference of the Americas (Vol. 1, pp. 513–519). Oakland, California: Elsevier Science, Ltd.; United Kingdom.

Field testing of heat exchanger tube coatings

Geothermal Resources Council Transactions, Vol. 23, pp. 65–69.

A study of the molecular interactions occurring in blends of cellulose esters and phenolic polymers

In T. J. Heinze & W. G. Glasser (Eds.), ACS Symposium Series 688, Cellulose Derivatives (p. 283).

The Studies of the molecular interactions between cellulose and lignin as a model for the hierarchical structure of wood

In T. J. Heinze & W. G. Glasser (Eds.), ACS Symposium Series 688, Cellulose Derivatives (p. 265).

Characterization of black liquor char gasification using thermogravimetry and molecular beam mass spectrometry

AIChE Journal, 315, 67–76.

Crystallization of poly(hydroxybutyrate-co-hydroxyvalerate) in wood fiber reinforced composites

Journal of Applied Polymer Science, 64, 1785–1796.

Effect of molecular structure on the properties of biomass oil-modified phenol formaldehyde resins

Proceedings of the International Symposium of Wood Pulp Chemistry.

Polymers for solar energy devices

In Functional polymers for emerging technology (pp. 567–588). Washington, DC: American Chemical Society.

Recovery of phenolic monomers from industrial novolac plastics

ACS Division of Fuel Chemistry, Fall.