Timothy Gladstone Clapp
Works (31)
Updated: July 5th, 2023 16:04
2010 report
Integrating learning, discovery, and engagement through the scholarship of engagement
In Technical Report- Not held in TRLN member libraries. Raleigh, NC: NCSU Office of Extension, Engagement, and Economic Development.
Source: NC State University Libraries
Added: August 6, 2018
2007 chapter
Error proofing, healthcare
In R. S. K. F. Ruggeri & F. W. Faltin (Eds.), Encyclopedia of statistics in quality and reliability.
Ed(s): R. Ruggeri & F. Faltin
TL;DR:
This article provides a simple methodology for applying error proofing principles and proven healthcare solutions for systematically generating workable solutions to reduce human error.
(via Semantic Scholar)
Sources: NC State University Libraries, NC State University Libraries
Added: August 6, 2018
2007 journal article
Ultrastrong, stiff, and lightweight carbon-nanotube fibers
ADVANCED MATERIALS, 19(23), 4198-+.
Contributors: X. Zhang *, Q. Li *, T. Holesinger * & . al.
Sources: Web Of Science, ORCID, NC State University Libraries
Added: August 6, 2018
2004 journal article
Applying systems approach and ideality to the supply chain bullwhip effect
TRIZ Journal.
Source: NC State University Libraries
Added: August 6, 2018
2004 conference paper
Introduction to design of experiments for new product development and process optimization
INTC 2004 : International Nonwovens Technical Conference : Joint INDA-TAPPI Conference : conference proceedings : September 20-23, 2004, Westin Harbour Castle, Toronto, Canada. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.
Source: NC State University Libraries
Added: August 6, 2018
2002 journal article
Design for Six Sigma versus traditional new product development: Just hype or fundamentally different?
Journal of Textile and Apparel Technology and Management, 2(2).
Source: NC State University Libraries
Added: August 6, 2018
2002 journal article
Development of a felled seam monitoring device
TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 24(1), 51–64.
author keywords: apparel; displacement-based sampling; felled seam; inspection; quality
UN Sustainable Development Goal Categories
14. Life Below Water
(OpenAlex)
Source: Web Of Science
Added: August 6, 2018
2001 conference paper
Ideality-based concept selection method
TRIZCON2001: the Third Annual Altshuller Institute for TRIZ Studies Conference. Worcester, MA : Altshuller Institute for TRIZ Studies.
Source: NC State University Libraries
Added: August 6, 2018
2000 journal article
Automatic boarding machine design employing quality function deployment, theory of inventive problem solving, and solid modeling
TRIZ Journal, 1.
Source: NC State University Libraries
Added: August 6, 2018
1999 journal article
An on-line monitoring system to recognize stitch defects through thread motion and high speed image analyses
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 121(1), 104–108.
TL;DR:
High speed image analysis of the sewing threads has verified conclusions drawn from the output signals of the piezoelectric sensors and contributed to a better understanding of the dynamics involved in high speed sewing.
(via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018
1999 conference paper
Application of modern engineering design tools for hosiery automation prototyping
ASME international mechanical engineering congress & exposition. ASME.
Source: NC State University Libraries
Added: August 6, 2018
1999 journal article
Design and analysis of a method for monitoring felled seat seam characteristics utilizing TRIZ Methods
TRIZ Journal, 12.
Source: NC State University Libraries
Added: August 6, 2018
1999 conference paper
Design and analysis of a method for monitoring felled seat seam characteristics utilizing modern engineering design tools
ASME international mechanical engineering congress & exposition. ASME.
Source: NC State University Libraries
Added: August 6, 2018
1998 patent
Draftless silver coiler packaging system for automated textile drafting system
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1998 conference paper
Engineering analysis of limp material properties drives design of electromechanical monitoring system
Society of Engineering Science 35th Technical Annual Meeting held at Washington State University, Pullman, Washington during the period Sept 27-30, 1998. Ft. Belvoir Defense Technical Information Center.
Source: NC State University Libraries
Added: August 6, 2018
1998 patent
Feed-forward and feed-back autoleveling system for automated textile drafting system
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1998 patent
Method and apparatus for correctively guiding a cutting device on a predetermined path along a sheet material
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1998 patent
Securing and pressuring system for drafting rollers for automated textile drafting systems
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1998 patent
Stitch quality monitoring system for sewing machines
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1998 patent
Synchronous drive system for automated textile drafting system
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1998 patent
Tongue and groove drafting roller autoleveling system for automated textile drafting system
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1997 journal article
A preliminary investigation of a beta-particle transmission gauge for seam quality determination
TEXTILE RESEARCH JOURNAL, 67(1), 23–34.
Source: Web Of Science
Added: August 6, 2018
1997 patent
Apparatus and method for monitoring predetermined seam characteristics
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1997 journal article
Optoelectronic devices: Their use in textile testing and yarn and fabric production
Textile Horizons (London, England), 12, 16–20.
Source: NC State University Libraries
Added: August 6, 2018
1996 conference paper
Development of an on-line monitoring system for stitch quality
Textile Industry Division Symposium, 1.
Source: NC State University Libraries
Added: August 6, 2018
1996 journal article
Finite-element modeling and control of flexible fabric parts
IEEE COMPUTER GRAPHICS AND APPLICATIONS, 16(5), 71–80.
TL;DR:
Software based on nonlinear shell theory can simulate 3D motions related to real fabric-manufacturing processes, which advances the technologies necessary for automating the textile and apparel industries.
(via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018
1996 patent
Sewing machine having presser bar system for maintaining constant contact force between presser foot and fabric
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1994 patent
Self-adjusting fabric ply picking device
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1993 conference paper
Manufacturing technology for apparel automation - layup module, Part I: Slat design
Fourth Annual Academic Apparel Research Conference, 8-9 February, 1993, Sheraton Raleigh Hotel, Raleigh, North Carolina, 4/5(3/4), 44–59.
Sources: NC State University Libraries, NC State University Libraries
Added: August 6, 2018
1991 patent
Apparatus for handling workpieces of limp sheet material
Washington, DC: U.S. Patent and Trademark Office.
Source: NC State University Libraries
Added: August 6, 2018
1990 journal article
LARGE-DEFLECTION BENDING OF WOVEN FABRIC FOR AUTOMATED MATERIAL-HANDLING
JOURNAL OF THE TEXTILE INSTITUTE, 81(1), 1–14.
TL;DR:
The research reported in this paper develops and validate a computer model for predicting fabric-deformation behaviour during automated handling, given experimentally measured fabric properties, and demonstrates the ability of the model to predict large deformations of typical apparel fabrics with a part size of up to 10 cm in length.
(via Semantic Scholar)
Source: Web Of Science
Added: August 6, 2018
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.