Timothy Clapp

Engagement, T. F. (2010). Integrating learning, discovery, and engagement through the scholarship of engagement. In Technical Report- Not held in TRLN member libraries. Raleigh, NC: NCSU Office of Extension, Engagement, and Economic Development.

Nakajo, T., Clapp, T. G., & Blanton, G. A. (2007). Error proofing, healthcare. In R. S. K. F. Ruggeri & F. W. Faltin (Eds.), Encyclopedia of statistics in quality and reliability. https://doi.org/10.1002/9780470061572.eqr409

Zhang, X., Li, Q., Holesinger, T. G., Arendt, P. N., Huang, J., Kirven, P. D., … Zhu, Y. (2007). Ultrastrong, stiff, and lightweight carbon-nanotube fibers. ADVANCED MATERIALS, 19(23), 4198-+. https://doi.org/10.1002/adma.200700776

Martin, B., Clapp, T., & Joines, J. A. (2004). Applying systems approach and ideality to the supply chain bullwhip effect. TRIZ Journal.

Clapp, T. G. (2004). Introduction to design of experiments for new product development and process optimization. INTC 2004  : International Nonwovens Technical Conference : Joint INDA-TAPPI Conference : conference proceedings : September 20-23, 2004, Westin Harbour Castle, Toronto, Canada. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.

Godfrey, A. B., & Clapp, T. (2002). Design for Six Sigma versus traditional new product development: Just hype or fundamentally different? Journal of Textile and Apparel Technology and Management, 2(2).

Clapp, T. G., & Martin, B. R. (2002). Development of a felled seam monitoring device. TRANSACTIONS OF THE INSTITUTE OF MEASUREMENT AND CONTROL, 24(1), 51–64. https://doi.org/10.1191/0142331202tm045oa

Gibson, N. (2001). Ideality-based concept selection method. TRIZCON2001: the Third Annual Altshuller Institute for TRIZ Studies Conference. Worcester, MA : Altshuller Institute for TRIZ Studies.

Clapp, T., & Kunst, B. (2000). Automatic boarding machine design employing quality function deployment, theory of inventive problem solving, and solid modeling. TRIZ Journal, 1.

Cox, R. N., Titus, K. J., & Clapp, T. G. (1999). An on-line monitoring system to recognize stitch defects through thread motion and high speed image analyses. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 121(1), 104–108. https://doi.org/10.1115/1.2830561

Clapp, T., & Kunst, B. (1999). Application of modern engineering design tools for hosiery automation prototyping. ASME international mechanical engineering congress & exposition. ASME.

Clapp, T., & Dickinson, B. A. (1999). Design and analysis of a method for monitoring felled seat seam characteristics utilizing TRIZ Methods. TRIZ Journal, 12.

Clapp, T., & Dickinson, B. A. (1999). Design and analysis of a method for monitoring felled seat seam characteristics utilizing modern engineering design tools. ASME international mechanical engineering congress & exposition. ASME.

Clapp, T. G., Rust, J. P., Farrington, C., & Bowen, D. T. (1998). Draftless silver coiler packaging system for automated textile drafting system. Washington, DC: U.S. Patent and Trademark Office.

Clapp, T., & Titus, K. J. (1998). Engineering analysis of limp material properties drives design of electromechanical monitoring system. Society of Engineering Science 35th Technical Annual Meeting held at Washington State University, Pullman, Washington during the period Sept 27-30, 1998. Ft. Belvoir Defense Technical Information Center.

Clapp, T. G., Rust, J. P., Farrington, C., & Peykamian, S. (1998). Feed-forward and feed-back autoleveling system for automated textile drafting system. Washington, DC: U.S. Patent and Trademark Office.

Clapp, T. (1998). Method and apparatus for correctively guiding a cutting device on a predetermined path along a sheet material. Washington, DC: U.S. Patent and Trademark Office.

Clapp, T. G., Rust, J. P., Farrington, C., Bowen, D. T., Saunders, R. N., & Thomas, M. M. (1998). Securing and pressuring system for drafting rollers for automated textile drafting systems. Washington, DC: U.S. Patent and Trademark Office.

Cox, R. N., Clapp, T. G., & Titus, K. J. (1998). Stitch quality monitoring system for sewing machines. Washington, DC: U.S. Patent and Trademark Office.

Clapp, T. G., Rust, J. P., Farrington, C., & Bowen, D. T. (1998). Synchronous drive system for automated textile drafting system. Washington, DC: U.S. Patent and Trademark Office.

Clapp, T. G., Rust, J. P., Farrington, C., & Bowen, D. T. (1998). Tongue and groove drafting roller autoleveling system for automated textile drafting system. Washington, DC: U.S. Patent and Trademark Office.

Titus, K. J., Clapp, T. G., Zhu, Z., & Gardner, R. P. (1997). A preliminary investigation of a beta-particle transmission gauge for seam quality determination. TEXTILE RESEARCH JOURNAL, 67(1), 23–34. https://doi.org/10.1177/004051759706700107

Clapp, T. G., Titus, K. J., & Davis, A. B. (1997). Apparatus and method for monitoring predetermined seam characteristics. Washington, DC: U.S. Patent and Trademark Office.

Gayler, J., & Titus, K. J. (1997). Optoelectronic devices: Their use in textile testing and yarn and fabric production. Textile Horizons (London, England), 12, 16–20.

Cox, R., & K.J., T. (1996). Development of an on-line monitoring system for stitch quality. Textile Industry Division Symposium, 1.

Eischen, J. W., Deng, S. G., & Clapp, T. G. (1996). Finite-element modeling and control of flexible fabric parts. IEEE COMPUTER GRAPHICS AND APPLICATIONS, 16(5), 71–80. https://doi.org/10.1109/38.536277

Clapp, T. G., & Barrett, G. R. (1996). Sewing machine having presser bar system for maintaining constant contact force between presser foot and fabric. Washington, DC: U.S. Patent and Trademark Office.

Beasock, R. J., Hamid, H. M., & Clapp, T. G. (1994). Self-adjusting fabric ply picking device. Washington, DC: U.S. Patent and Trademark Office.

Seyam, A.-F., Sun, F., McPherson, E., Clapp, T., & Little, T. J. (1993). Manufacturing technology for apparel automation - layup module, Part I: Slat design. Fourth Annual Academic Apparel Research Conference, 8-9 February, 1993, Sheraton Raleigh Hotel, Raleigh, North Carolina, 4/5(3/4), 44–59. https://doi.org/10.1108/eb003019

Clapp, T. G., & Cole, W. R. (1991). Apparatus for handling workpieces of limp sheet material. Washington, DC: U.S. Patent and Trademark Office.

BROWN, P. R., BUCHANAN, D. R., & CLAPP, T. G. (1990). LARGE-DEFLECTION BENDING OF WOVEN FABRIC FOR AUTOMATED MATERIAL-HANDLING. JOURNAL OF THE TEXTILE INSTITUTE, 81(1), 1–14. https://doi.org/10.1080/00405009008658322