Is this your profile?
Claim your Citation Index profile in order to display more information about you and gain access to Libraries services. Just create or connect your ORCID iD.
2023 journal article
Critical Evaluation of a Novel Analysis Technique for Assessment of Printed Circuit Heat Exchangers in High-Temperature Nuclear Service
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 145(3).
2022 journal article
Development of a unified constitutive model coupled with a continuum damage model for design and evaluation of high-temperature components
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 257.
2022 journal article
Influence of Weld Sequence on the Low-Cycle Fatigue Failure of WUF-B Connections
JOURNAL OF STRUCTURAL ENGINEERING, 148(7).
2022 journal article
Proposed Material Properties, Allowable Stresses, and Design Curves of Diffusion Bonded Alloy 800H for the ASME Code Section III Division 5
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 144(6).
2021 journal article
A Practical Analysis Framework for Assessment of Printed Circuit Heat Exchangers in High-Temperature Nuclear Service
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 144(4).
2021 journal article
Mechanical and Microstructural Performance Evaluation of Diffusion Bonded Alloy 800H for Very High Temperature Nuclear Service
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 144(2).
2021 journal article
Non-contact temperature control and stereo digital image correlation for high-temperature testing of miniature tubular specimens
REVIEW OF SCIENTIFIC INSTRUMENTS, 92(11).
2021 journal article
Optimized stereo digital image correlation setup for miniature round specimen: framework development and implementation
OPTICS AND LASERS IN ENGINEERING, 144.
2020 journal article
A novel gripper for multiaxial mechanical testing of microtubes at elevated temperatures
REVIEW OF SCIENTIFIC INSTRUMENTS, 91(5).
2020 journal article
A unified constitutive model in simulating creep strains in addition to fatigue responses of Haynes 230
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 185, 394–409.
2020 journal article
Fatigue-Creep Interaction of P92 Steel and Modified Constitutive Modelling for Simulation of the Responses
METALS, 10(3).
2020 journal article
Material modeling and simulation of continuous-bending-under-tension of AA6022-T4
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 287.
2020 journal article
P92 steel creep-fatigue interaction responses under hybrid stress-strain controlled loading and a life prediction model
INTERNATIONAL JOURNAL OF FATIGUE, 140.
2019 journal article
An Unstiffened Eight-Bolt Extended End-Plate Moment Connection for Special and Intermediate Moment Frames
JOURNAL OF STRUCTURAL ENGINEERING, 145(7).
2019 journal article
Automated calibration of advanced cyclic plasticity model parameters with sensitivity analysis for aluminium alloy 2024-T351
ADVANCES IN MECHANICAL ENGINEERING, 11(3).
2019 journal article
Development of a novel constitutive model for improved structural integrity analysis of piping components
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 177.
2019 journal article
Development of scanning electron microscope-compatible multiaxial miniature testing system
MEASUREMENT SCIENCE AND TECHNOLOGY, 30(10).
2019 journal article
Performance Evaluation of Surface-Activated Solid-State Welding for ASTM A992 Structural Steel
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 31(8).
2018 journal article
Seismic Performance of a Fire-Exposed Moment-Resisting Frame
JOURNAL OF STRUCTURAL ENGINEERING, 144(11).
2017 journal article
A Novel Hybrid Heating Method for Mechanical Testing of Miniature Specimens at Elevated Temperature
JOURNAL OF MICRO AND NANO-MANUFACTURING, 5(2).
2017 journal article
Constitutive modeling for thermo-mechanical low-cycle fatigue-creep stress-strain responses of Haynes 230
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 126, 122–139.
2017 conference paper
Creep-fatigue damage evaluation of modified grade 91 headers using damage coupled unified viscoplastic model
Proceedings of the ASME Pressure Vessels and Piping Conference, 2017, Vol 3B.
2017 conference paper
Improving simulations for low cycle fatigue and ratcheting responses of elbows
Proceedings of the ASME Pressure Vessels and piping conference, 2016, vol 5.
2017 conference paper
Influence of initial and welding residual stresses on low cycle fatigue and ratcheting response simulations of elbows
Proceedings of the ASME Pressure Vessels and Piping Conference, 2017, vol 8.
2017 journal article
Initial Residual Stresses in Hot-Rolled Wide-Flange Shapes: A Computational Technique and Influence on Structural Performances
JOURNAL OF STRUCTURAL ENGINEERING, 143(5).
2017 journal article
Performance enhancement of eight bolt extended end-plate moment connections under simulated seismic loading
ENGINEERING STRUCTURES, 151, 444–458.
2017 journal article
Thermo-mechanical low-cycle fatigue-creep of Haynes 230
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 126, 90–104.
2017 conference paper
Unified viscoplastic model coupled with damage for evaluation of creep-fatigue of grade 91 steel
Proceedings of the ASME pressure vessels and piping conference, 2017, vol 6a.
2016 conference paper
A novel hybrid heating method for elevated temperature mechanical testing of miniature specimens
Proceedings of the ASME 11th International Manufacturing Science and Engineering Conference, 2016, vol 1.
2016 conference paper
Influence of notch geometry on the notch vicinity stress and strain responses
Proceedings of the ASME Pressure Vessels and Piping Conference, 2016, Vol 1A.
2016 journal article
Isothermal low-cycle fatigue and fatigue-creep of Haynes 230
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 88-89, 146–164.
2016 journal article
Micromechanical Modeling of the Ratcheting Behavior of 304 Stainless Steel
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 138(2).
2016 journal article
Resilient welded steel moment connections by enhanced beam buckling resistance
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 127, 77–91.
2016 journal article
Seismic Enhancement of Welded Unreinforced Flange-Bolted Web Steel Moment Connections
JOURNAL OF STRUCTURAL ENGINEERING, 142(11).
2016 conference paper
Thermomechanical fatigue response and constitutive modeling for Haynes 230
Proceedings of the ASME Pressure Vessels and piping conference, 2016, vol 5.
2016 conference paper
Unified viscoplasticity modeling features needed for simulation of grade 91 creep and fatigue responses
Proceedings of the ASME Pressure Vessels and Piping Conference, 2016, Vol 6a.
2016 journal article
Unified viscoplasticity modeling for isothermal low-cycle fatigue and fatigue-creep stress-strain responses of Haynes 230
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 88-89, 131–145.
2015 conference paper
A unified viscoplastic model for creep and fatigue-creep response simulation of Haynes 230
ASME Pressure Vessels and Piping Conference - 2015, vol 3.
2015 journal article
An innovative seismic performance enhancement technique for steel building moment resisting connections
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 109, 34–46.
2015 journal article
Constitutive Models in Simulating Low-Cycle Fatigue and Ratcheting Responses of Elbow
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 137(3).
2015 conference paper
Long and short radius elbow experiments and evaluation of advanced constitutive models to simulate the responses
Asme Pressure Vessels and Piping Conference - 2015, vol 8.
2015 journal article
Low-Cycle Fatigue and Ratcheting Responses of Elbow Piping Components
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 137(3).
2015 journal article
Ratcheting and stress relaxation of SA333 Gr. 6 carbon steel samples under uniaxial multistep strain-controlled condition
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 43(6).
2014 journal article
Biaxial Ratcheting of Ultra High Molecular Weight Polyethylene: Experiments and Constitutive Modeling
JOURNAL OF TESTING AND EVALUATION, 42(6), 1486–1492.
2013 conference paper
Constitutive modeling of Haynes 230 for anisothermal thermo-mechanical fatigue and multiaxial creep-ratcheting responses
Proceedings of the ASME Pressure Vessels and Piping Conference - 2013, vol 6B: Materials and Fabrication.
2013 conference paper
Constitutive modeling of high temperature uniaxial creep-fatigue and creep-ratcheting responses of alloy 617
Proceedings of the ASME Pressure Vessels and Piping Conference - 2013, vol 5.
2013 conference paper
Fatigue and ratcheting experimental responses of alloy 617 under high temperature multiaxial loading
Proceedings of the ASME Pressure Vessels and Piping Conference - 2013, vol 3: Design and Analysis.
2013 chapter
Haynes 230 High Temperature Thermo-Mechanical Fatigue Constitutive Model Development
In B. Antoun, H. J. Qi, R. Hall, G. P. Tandon, H. Lu, C. Lu, … A. Amirkhizi (Eds.), Challenges In Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials (pp. 151–160).
Ed(s): B. Antoun, H. Qi, R. Hall, G. Tandon, H. Lu, C. Lu, J. Furmanski, A. Amirkhizi
2013 chapter
High Temperature Multiaxial Creep-Fatigue and Creep-Ratcheting Behavior of Alloy 617
In B. Antoun, H. J. Qi, R. Hall, G. P. Tandon, H. Lu, C. Lu, … A. Amirkhizi (Eds.), Challenges In Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials (pp. 83–97).
Ed(s): B. Antoun, H. Qi, R. Hall, G. Tandon, H. Lu, C. Lu, J. Furmanski, A. Amirkhizi
2013 chapter
Unified Constitutive Modeling of Haynes 230 for Isothermal Creep-Fatigue Responses
In B. Antoun, H. J. Qi, R. Hall, G. P. Tandon, H. Lu, C. Lu, … A. Amirkhizi (Eds.), Challenges In Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials (pp. 175–185).
Ed(s): B. Antoun, H. Qi, R. Hall, G. Tandon, H. Lu, C. Lu, J. Furmanski, A. Amirkhizi
2012 conference paper
Constitutive model development for thermo-mechanical fatigue response simulation of Haynes 230
Proceedings of the ASME Pressure Vessels and Piping Conference 2012, PVP 2012, vol 9, 171–179.
2012 conference paper
Isothermal fatigue responses and constitutive modeling of Haynes 230
Proceedings of the ASME Pressure Vessels and Piping Conference 2012, PVP 2012, vol 9, 71–79.
2011 journal article
Reversed Cyclic Flexural Behavior of Spiral DSAW and Single Seam ERW Steel Pipe Piles
JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 138(9), 1099–1109.
2011 journal article
Uniaxial Strain and Stress-Controlled Cyclic Responses of Ultrahigh Molecular Weight Polyethylene: Experiments and Model Simulations
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 133(2).
2011 journal article
Validation of a single-mode polymer optical fiber sensor and interrogator for large strain measurements
MEASUREMENT SCIENCE AND TECHNOLOGY, 22(7).
2010 conference paper
Ductility of Welded Steel Pile to Steel Cap Beam Connections
Structures Congress 2010. Presented at the Structures Congress 2010.
Event: Structures Congress 2010
2009 article
Calibration of a single-mode polymer optical fiber large-strain sensor
Kiesel, S., Peters, K., Hassan, T., & Kowalsky, M. (2009, March). MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 20.
2009 journal article
Cleaving of solid single mode polymer optical fiber for strain sensor applications
OPTICS COMMUNICATIONS, 282(5), 856–861.
2009 conference paper
Constituitive modeling for simulating a broad set of uniaxial and multiaxial cyclic and ratcheting responses
Computer Applications/Technology and Bolted Joints, 289–293.
2009 journal article
Macro versus micro-scale constitutive models in simulating proportional and nonproportional cyclic and ratcheting responses of stainless steel 304
INTERNATIONAL JOURNAL OF PLASTICITY, 25(10), 1910–1949.
2009 conference paper
Residual stress and strain responses of welded piping joints under low-cycle fatigue loading
ASME Pressure Vessels and Piping Conference 2009, vol 1: Codes and Standards, 95–101.
2009 journal article
Seismic behavior of flexural dominated reinforced concrete bridge columns at low temperatures
Journal of Cold Regions Engineering, 23(1), 18–42.
2009 journal article
Seismic behavior of shear-dominated reinforced concrete columns at low temperatures
ACI Structural Journal, 106(4), 445–454.
2009 conference paper
Simulation of ratcheting responses of elbow piping components
ASME Pressure Vessels and Piping Conference 2009, vol 1: Codes and Standards, 103–108.
2008 journal article
Cyclic response of reinforced concrete members at low temperatures
Journal of Cold Regions Engineering, 22(3), 79–102.
2008 journal article
Evaluation of cyclic plasticity models in ratcheting simulation of straight pipes under cyclic bending and steady internal pressure
INTERNATIONAL JOURNAL OF PLASTICITY, 24(10), 1756–1791.
2008 journal article
Influence of non-proportional loading on ratcheting responses and simulations by two recent cyclic plasticity models
INTERNATIONAL JOURNAL OF PLASTICITY, 24(10), 1863–1889.
2008 journal article
Large deformation in-fiber polymer optical fiber sensor
IEEE PHOTONICS TECHNOLOGY LETTERS, 20(5-8), 416–418.
2007 article
Behaviour of intrinsic polymer optical fibre sensor for large-strain applications
Kiesel, S., Peters, K., Hassan, T., & Kowalsky, M. (2007, October). MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 18, pp. 3144–3154.
2007 journal article
Modeling of L-shaped, precast, prestressed concrete spandrels
PCI JOURNAL, 52(2), 78–92.
2006 conference paper
Fatigue and residual stress responses of welded piping joints
Trends in Welding Research, Proceedings, 595–600.
2004 journal article
Bond mechanism of near-surface-mounted fiber-reinforced polymer bars for flexural strengthening of concrete structures
ACI Structural Journal, 101(6), 830–839.
2003 journal article
Investigation of bond in concrete structures strengthened with near surface mounted carbon fiber reinforced polymer strips
Journal of Composites for Construction, 7(3), 248–257.
2002 journal article
An advancement in cyclic plasticity modeling for multiaxial ratcheting simulation
INTERNATIONAL JOURNAL OF PLASTICITY, 18(7), 873–894.
2002 journal article
Flexural strengthening of prestressed bridge slabs with FRP systems
PCI JOURNAL, 47(1), 76–93.
2001 journal article
Kinematic hardening rules in uncoupled modeling for multiaxial ratcheting simulation
INTERNATIONAL JOURNAL OF PLASTICITY, 17(7), 885–905.
2001 journal article
On the difference of fatigue strengths from rotating bending, four-point bending, and cantilever bending tests
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 78(1), 19–30.
2000 article
Anatomy of coupled constitutive models for ratcheting simulation
INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 16, pp. 381–409.
1998 journal article
Improved ratcheting analysis of piping components
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 75(8), 643–652.
Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.
Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.