Tim Horn Ives, L., Bui, T., Habermann, T., Collins, G., Marsden, D., Neilson, J., … Rock, C. (2023). 1.5 MW CW RF Loads for Gyrotrons. 21ST JOINT WORKSHOP ON ELECTRON CYCLOTRON EMISSION AND ELECTRON CYCLOTRON RESONANCE HEATING, EC21, Vol. 277. https://doi.org/10.1051/epjconf/202327704008 Zhang, H., Carriere, P. R., Amoako, E. D., Rock, C. D., Thielk, S. U., Fletcher, C. G., & Horn, T. J. (2023, August 30). Microstructure and Elevated Temperature Flexure Testing of Tungsten Produced by Electron Beam Additive Manufacturing. JOM, Vol. 8. https://doi.org/10.1007/s11837-023-06045-5 Ovalle, D. G., Rock, C., Winkler, C., Hartshorn, D., Barr, C., Cullom, T., … Horn, T. (2023). Microstructure development and properties of micro-alloyed copper, Cu-0.3Zr-0.15Ag, produced by electron beam additive manufacturing. Materials Characterization, 197, 112675. https://doi.org/10.1016/j.matchar.2023.112675 Saptarshi, S., DeJong, M., Rock, C., Anderson, I., Napolitano, R., Forrester, J., … Horn, T. (2022, August 2). Laser Powder Bed Fusion of ODS 14YWT from Gas Atomization Reaction Synthesis Precursor Powders. JOM, Vol. 8. https://doi.org/10.1007/s11837-022-05418-6 Horn, T., Rock, C., Kaoumi, D., Anderson, I., White, E., Prost, T., … Darsell, J. (2022). Laser powder bed fusion additive manufacturing of oxide dispersion strengthened steel using gas atomized reaction synthesis powder. MATERIALS & DESIGN, 216. https://doi.org/10.1016/j.matdes.2022.110574 Zhang, D., Darsell, J. T., Wang, J., Ma, X., Grant, G. J., Anderson, I. E., … Odette, G. R. (2022). No ball milling nee de d: Alternative ODS steel manufacturing with gas atomization reaction synthesis (GARS) and friction-based processing. JOURNAL OF NUCLEAR MATERIALS, 566. https://doi.org/10.1016/j.jnucmat.2022.153768 Jia, Y., Mehta, S. T., Li, R., Chowdhury, M. A. R., Horn, T., & Xu, C. (2021). Additive manufacturing of ZrB2-ZrSi2 ultra-high temperature ceramic composites using an electron beam melting process. CERAMICS INTERNATIONAL, 47(2), 2397–2405. https://doi.org/10.1016/j.ceramint.2020.09.082 Rock, C., Tarafder, P., Ives, L., & Horn, T. (2021). Characterization of copper & stainless steel interface produced by electron beam powder bed fusion. MATERIALS & DESIGN, 212. https://doi.org/10.1016/j.matdes.2021.110278 Hankwitz, J. P., Ledford, C., Rock, C., O'Dell, S., & Horn, T. J. (2021). Electron Beam Melting of Niobium Alloys from Blended Powders. MATERIALS, 14(19). https://doi.org/10.3390/ma14195536 Ellis, E. A. I., Sprayberry, M. A., Ledford, C., Hankwitz, J. P., Kirka, M. M., Rock, C. D., … Dehoff, R. R. (2021). Processing of tungsten through electron beam melting *. JOURNAL OF NUCLEAR MATERIALS, 555. https://doi.org/10.1016/j.jnucmat.2021.153041 Tarafder, P., Rock, C., & Horn, T. (2021). Quasi-Static Tensile Properties of Unalloyed Copper Produced by Electron Beam Powder Bed Fusion Additive Manufacturing. MATERIALS, 14(11). https://doi.org/10.3390/ma14112932 Rock, C., Ledford, C., Garcia-Avila, M., West, H., Miller, V. M., Pankow, M., … Horn, T. (2021). The Influence of Powder Reuse on the Properties of Nickel Super Alloy ATI 718 (TM) in Laser Powder Bed Fusion Additive Manufacturing. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 52(2), 676–688. https://doi.org/10.1007/s11663-020-02040-2 Ives, L., Bui, T., Marsden, D., Collins, G., Horn, T., Ledford, C., & Neilson, J. (2020). Additive Manufacture of RF Loads for ITER. 2020 IEEE 21ST INTERNATIONAL CONFERENCE ON VACUUM ELECTRONICS (IVEC 2020), pp. 143–144. https://doi.org/10.1109/IVEC45766.2020.9520466 Rock, C., Lara-Curzio, E., Ellis, B., Ledford, C., Leonard, D. N., Kannan, R., … Horn, T. (2020). Additive Manufacturing of Pure Mo and Mo plus TiC MMC Alloy by Electron Beam Powder Bed Fusion. JOM, 72(12), 4202–4213. https://doi.org/10.1007/s11837-020-04442-8 Rock, C., Vadlakonda, R., Figurskey, S., Ledford, C., West, H., Miller, V., … Horn, T. (2020). Analysis of Self-Organized Patterned Surface Oxide Spots on Ejected Spatter Produced during Laser Powder Bed Fusion. Additive Manufacturing, 35, 101320. https://doi.org/10.1016/j.addma.2020.101320 Nantista, C., Gamzina, D., Ledford, C., Horn, T., Carriere, P., & Frigola, P. (2020). Design and Test of Copper Printed RF Cavities. 2020 IEEE 21ST INTERNATIONAL CONFERENCE ON VACUUM ELECTRONICS (IVEC 2020), pp. 149–150. https://doi.org/10.1109/IVEC45766.2020.9520624 Du, H., Yousefian, O., Horn, T., & Muller, M. (2020). Evaluation of Structural Anisotropy in a Porous Titanium Medium Mimicking Trabecular Bone Structure Using Mode-Converted Ultrasonic Scattering. IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 67(5), 1017–1024. https://doi.org/10.1109/TUFFC.2019.2963162 Ledford, C., Tung, M., Rock, C., & Horn, T. (2020). Real time monitoring of electron emissions during electron beam powder bed fusion for arbitrary geometries and toolpaths. ADDITIVE MANUFACTURING, 34. https://doi.org/10.1016/j.addma.2020.101365 Ledford, C., Rock, C., Carriere, P., Frigola, P., Gamzina, D., & Horn, T. (2019). Characteristics and Processing of Hydrogen-Treated Copper Powders for EB-PBF Additive Manufacturing. APPLIED SCIENCES-BASEL, 9(19). https://doi.org/10.3390/app9193993 White, E., Rinko, E., Prost, T., Horn, T., Ledford, C., Rock, C., & Anderson, I. (2019). Processing of Alnico Magnets by Additive Manufacturing. APPLIED SCIENCES-BASEL, 9(22). https://doi.org/10.3390/app9224843 Mahbooba, Z., Thorsson, L., Unosson, M., Skoglund, P., West, H., Horn, T., … Harrysson, O. (2018). Additive manufacturing of an iron-based bulk metallic glass larger than the critical casting thickness. APPLIED MATERIALS TODAY, 11, 264–269. https://doi.org/10.1016/j.apmt.2018.02.011 Horn, T., Karakurt, I., Ledford, C., Gonzalez, M., Gamzina, D., Luhmann, N. C., & Lin, L. W. (2018). Additively manufactured WR-10 copper waveguide. 2018 ieee international vacuum electronics conference (ivec), 409–410. https://doi.org/10.1109/ivec.2018.8391526 Gamzina, D., Luhmann, N. C., Ledford, C., Horn, T., Karakaut, I., Lin, L., & Frigola, P. (2017). Additive vacuum electronics electron beam melting of copper. 2017 eighteenth international vacuum electronics conference (ivec). https://doi.org/10.1109/ivec.2017.8289495 Mahbooba, Z., West, H., Harrysson, O., Wojcieszynski, A., Dehoff, R., Nandwana, P., & Horn, T. (2017). Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured with Powder Bed Electron Beam Additive Manufacturing. JOM, 69(3), 472–478. https://doi.org/10.1007/s11837-016-2210-9 Schoenfeld-Tacher, R. M., Horn, T. J., Scheviak, T. A., Royal, K. D., & Hudson, L. C. (2017). Evaluation of 3D Additively Manufactured Canine Brain Models for Teaching Veterinary Neuroanatomy. JOURNAL OF VETERINARY MEDICAL EDUCATION, 44(4), 612–619. https://doi.org/10.3138/jvme.0416-080r de Luis Balaguer, M. A., Ramos-Pezzotti, M., Rahhal, M. B., Melvin, C. E., Johannes, E., Horn, T. J., & Sozzani, R. (2016). Multi-sample Arabidopsis Growth and Imaging Chamber (MAGIC) for long term imaging in the ZEISS Lightsheet Z.1. Developmental Biology, 419(1), 19–25. https://doi.org/10.1016/j.ydbio.2016.05.029 Harrysson, O. L. A., Marcellin-Little, D. J., & Horn, T. J. (2015). Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery. JOM, 67(3), 647–654. https://doi.org/10.1007/s11837-015-1295-x Horn, T. J., Harrysson, O. L. A., West, H. A., II, Little, J. P., & Marcellin-Little, D. J. (2014). Development of a patient-specific bone analog for the biomechanical evaluation of custom implants. RAPID PROTOTYPING JOURNAL, 20(1), 41–49. https://doi.org/10.1108/rpj-08-2012-0069 Frigola, P., Harrysson, O. A., Horn, T. J., West, H. A., Aman, R. L., Rigsbee, J. M., … Rodriguez, E. (2014). Fabricating copper components with electron beam melting. Advanced Materials & Processes, 172(7), 20–24.