Wei Jing Jing, W., Wu, Z., Roberts, W. L., & Fang, T. (2017). Effects of Fuel Quantity on Soot Formation Process for Biomass-Based Renewable Diesel Fuel Combustion. JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 139(10). https://doi.org/10.1115/1.4036292 Jing, W., Wu, Z. Y., Roberts, W. L., & Fang, T. (2016). Effects of fuel quantity on soot formation process for biomass-based renewable diesel fuel combustion. Proceedings of the ASME Internal Combustion Engine Division Fall Technical Conference (ICEF). https://doi.org/10.1115/icef2016-9380 Wu, Z., Jing, W., Zhang, W., Roberts, W. L., & Fang, T. (2016). Narrow band flame emission from dieseline and diesel spray combustion in a constant volume combustion chamber. FUEL, 185, 829–846. https://doi.org/10.1016/j.fuel.2016.08.022 Jing, W., Wu, Z., Roberts, W. L., & Fang, T. (2016). Spray combustion of biomass-based renewable diesel fuel using multiple injection strategy in a constant volume combustion chamber. FUEL, 181, 718–728. https://doi.org/10.1016/j.fuel.2016.05.039 Zhang, J., Jing, W., Roberts, W. L., & Fang, T. (2015). Effects of Ambient Oxygen Concentration on Soot Temperature and Concentration for Biodiesel and Diesel Spray Combustion. JOURNAL OF ENERGY ENGINEERING, 141(2). https://doi.org/10.1061/(asce)ey.1943-7897.0000214 Jing, W., Wu, Z., Zhang, W., & Fang, T. (2015). Measurements of soot temperature and KL factor for spray combustion of biomass derived renewable fuels. ENERGY, 91, 758–771. https://doi.org/10.1016/j.energy.2015.08.069 Jing, W., Roberts, W. L., & Fang, T. (2015). Spray combustion of Jet-A and diesel fuels in a constant volume combustion chamber. ENERGY CONVERSION AND MANAGEMENT, 89, 525–540. https://doi.org/10.1016/j.enconman.2014.10.010 Fang, T., & Jing, W. (2014). Flow, heat, and species transfer over a stretching plate considering coupled Stefan blowing effects from species transfer. COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 19(9), 3086–3097. https://doi.org/10.1016/j.cnsns.2014.02.009 Zhang, J., Jing, W., Roberts, W. L., & Fang, T. (2014). Soot measurements for diesel and biodiesel spray combustion under high temperature highly diluted ambient conditions. FUEL, 135, 340–351. https://doi.org/10.1016/j.fuel.2014.06.071 Fang, T., & Jing, W. (2013). Closed-form analytical solutions of flow and heat transfer for an unsteady rear stagnation-point flow. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 62(1), 55–62. https://doi.org/10.1016/j.ijheatmasstransfer.2013.02.049 Jing, W., Roberts, W. L., & Fang, T. (2013). Effects of Ambient Temperature and Oxygen Concentration on Diesel Spray Combustion Using a Single-Nozzle Injector in a Constant Volume Combustion Chamber. COMBUSTION SCIENCE AND TECHNOLOGY, 185(9), 1378–1399. https://doi.org/10.1080/00102202.2013.798315 Zhang, J., Jing, W., Roberts, W. L., & Fang, T. (2013). Effects of ambient oxygen concentration on biodiesel and diesel spray combustion under simulated engine conditions. ENERGY, 57, 722–732. https://doi.org/10.1016/j.energy.2013.05.063 Jing, W., & Fang, T. (2013). Note on a New Blackbody Fraction Function Used for Surfaces With a Linear Emissivity in a Wavelength Interval. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 135(5). https://doi.org/10.1115/1.4023393 Zhang, J., Jing, W., Roberts, W. L., & Fang, T. (2013). Soot temperature and KL factor for biodiesel and diesel spray combustion in a constant volume combustion chamber. APPLIED ENERGY, 107, 52–65. https://doi.org/10.1016/j.apenergy.2013.02.023 Zhang, J., Jing, W., & Fang, T. (2012). High speed imaging of OH* chemiluminescence and natural luminosity of low temperature diesel spray combustion. FUEL, 99, 226–234. https://doi.org/10.1016/j.fuel.2012.04.031