William Oxenham

Nomination and commentary on 'The yarn twist inside the rotor in open-end spinning, by Cormack D., Grosberg P., & Ho K. H., Journal of the Textile Institute, 70:9, 380-384, 1979, and published online on 01 Dec 2008. https://doi.org/10.1080/00405007908658870'

Oxenham, W. (2023, June 3). Nomination and commentary on 'The yarn twist inside the rotor in open-end spinning, by Cormack D., Grosberg P., & Ho K. H., Journal of the Textile Institute, 70:9, 380-384, 1979, and published online on 01 Dec 2008.

The role of hydrophilic finishes in frictional electrification and charge decay of woven fabric from polyester

JOURNAL OF THE TEXTILE INSTITUTE, 111(1), 1–9.

A novel approach to investigating frictional electrification and charge decay on woven textile fabrics treated with ionic antistatic and hydrophilic surface finishes

JOURNAL OF THE TEXTILE INSTITUTE, 110(3), 338–348.

An introduction to a new direct testing method for characterizing pressure in compression fabrics

JOURNAL OF THE TEXTILE INSTITUTE, 110(6), 822–831.

An indirect testing approach for characterizing pressure profiles of compression bandages and hosiery

JOURNAL OF THE TEXTILE INSTITUTE, 109(2), 256–267.

Introduction to the late Professor John W. S. Hearle's publication list

JOURNAL OF THE TEXTILE INSTITUTE, Vol. 108, pp. 1477–1488.

Investigation into Feasibility of Inductively Coupled Antenna for Smart Clothing

International Journal of Clothing Science and Technology, 26(1), 25–37.

Towards characterizing the pressure profiles of medical compression hosiery: an investigation of current measurement devices and techniques

JOURNAL OF THE TEXTILE INSTITUTE, 106(7), 757–767.

Contact electrification of polymeric surfaces

Indian Journal of Fibre & Textile Research, 38(3), 265–269.

Frictional electrification on polymeric flat surfaces

Journal of Engineered Fibers and Fabrics, 8(1), 126–136.

Effect of Fabric Substrate and Coating Material on the Quality of Conductive Printing

Journal of Textile Institute, 104(2), 213–222.

Vortex spinning technology

Textile Progress, 44(3-4), 141–174.

A study of the drafting force in roller drafting and its influence on sliver irregularity

JOURNAL OF THE TEXTILE INSTITUTE, 102(11), 994–1001.

Assessing the validity of a niche strategy model in predicting the potential and success of niche markets and products

JOURNAL OF THE TEXTILE INSTITUTE, 103(8), 900–911.

Effect of Protective Coating on the Performance of Wearable Antennas

[Paper]. In Lecture Notes in Computer Science (pp. 84–93).

Effect of accelerated point distribution on sliver irregularity. Part II: optimization of draft settings in two-zone roller drafting system

Journal of the Textile Institute, 103(5), 558–564.

Effect of accelerated point distribution on sliver irregularity. Part Ι: characterization of accelerated point distribution

Journal of the Textile Institute, 103(5), 549–557.

Effect of relative rubbing speed on the tribo-electrification of continuous filament yarn by stainless steel pins

JOURNAL OF THE TEXTILE INSTITUTE, 102(12), 1075–1085.

Electrification of antistatic-treated polymeric surface

JOURNAL OF THE TEXTILE INSTITUTE, 103(2), 215–224.

Generation of cotton fiber length probability density function with length measures

Journal of the Textile Institute, 103(2), 225–230.

Optimal data use in staple yarn manufacturing

JOURNAL OF THE TEXTILE INSTITUTE, 103(5), 499–507.

Study on the blend irregularity in blended yarns

JOURNAL OF THE TEXTILE INSTITUTE, 103(1), 28–33.

Static generation and dissipation of polyester continuous filament yarn

[Poster]. Journal of the Textile Institute, 101(3), 261–269.

Analysis of Mechanical and Electrical Noise Interfacing the Instrument During Data Acquisition for Measurement of Surface Properties of Textile Fibers

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 57(12), 2885–2890.

Analysis of supply chain strategies used by the United States textile and apparel industries

Research Journal of Textile & Apparel, 12(3), 1–17.

Competitive analysis of niche product supply chains

Research Journal of Textile & Apparel, 12(3), 18–29.

Devices for measuring electrostatic generation and dissipation on the surfaces of polymeric materials

JOURNAL OF THE TEXTILE INSTITUTE, 100(4), 338–349.

Evaluating the surface characteristics of fibres by compression method

JOURNAL OF THE TEXTILE INSTITUTE, 99(6), 545–549.

Warp break detection in Jacquard weaving using Micro-Electro-Mechanical Systems: Effect of yarn type

TEXTILE RESEARCH JOURNAL, 78(8), 664–670.

Warp breaks detection in Jacquard weaving using MEMS: Effect of weave on break signals

Journal of Engineered Fibers and Fabrics, 3(1), 25–31.

Wireless yarn tension measurement, and control in direct cabling process

JOURNAL OF THE TEXTILE INSTITUTE, 100(5), 400–411.

Dynamic electrostatic generation and dissipation on polymer surfaces

301–311.

Global dynamics impacting yarn production and consumption

Journal of Textile and Apparel Technology and Management, 5(4), 1–26.

ITMA Technology: Staple spinning

Textile World (New York, N.Y.), 157(11), 26–32.

Niche marketing strategy in the textile and apparel industry: an investigation into development factors

239–256.

Prevention of warp breaks in Jacquard weaving

Fibers and Polymers, 8(1), 79–83.

Warp breaks detection in Jacquard weaving using MEMS: System development

JOURNAL OF THE TEXTILE INSTITUTE, 98(3), 275–280.

Comparison of properties and structures of compact and conventional spun yarns

TEXTILE RESEARCH JOURNAL, 76(7), 567–575.

Effects of some process parameters on the structure and properties of vortex spun yarn

TEXTILE RESEARCH JOURNAL, 76(6), 492–499.

Innovation in spun yarn technologies: Present and future

Indian Journal of Fibre & Textile Research, 31(1), 116–124.

Niche market strategy for a mature marketplace

MARKETING INTELLIGENCE & PLANNING, 24(7), 694–707.

Niche market strategy in the textile and apparel industry

JOURNAL OF FASHION MARKETING AND MANAGEMENT, 10(4), 420-+.

The mechanism of the air-jet texturing: The role of wetting, spin finish and friction in forming and fixing loops

TEXTILE RESEARCH JOURNAL, 76(2), 116–125.

The use of a niche market strategy by U.S. textile and apparel firms

Journal of the Textile Institute, 97(2), 77–85.

Application of MEMS in yarn processing and quality control

Textile Asia, 36(12), 52–54.

Application of MEMS in yarn processing and quality control: Dynamic yarn tension measurement and control in direct cabling machines

A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA, 1–9. [Manchester, England]: The Textile Institute.

Application of MEMS in yarn processing and quality control: Dynamic yarn tension measurement and control in two for one twisting mechanism

A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA. [Manchester, England]: The Textile Institute.

Automatic warp breaks monitoring and repair in Jacquard weaving using MEMS : Instrumentation and signal analysis

A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA. [Manchester, England]: The Textile Institute.

Computer modeling of fiber movements in high speed airflow

Research Journal of Textile & Apparel, 8(4), 77–85.

Computer modeling of fiber movements in high-speed airflow

A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA, 1–10. [Manchester, England]: The Textile Institute.

Developments in worsted spinning

Textile Asia, 36(1), 38–46.

Effects of antioxidants on the thermal degradation of a polyol ester lubricant using GPC

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 45(1), 15–22.

Examination of the factors surrounding the implementation of niche market strategy

A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA, 1–14. [Manchester, England]: The Textile Institute.

Keynote address - trends in yarn production

11th International Wool Research Conference: 4th - 9th September, 2005, University of Leeds: proceedings, 1–9. Leeds, UK : Department of Colour and Polymer Chemistry, University of Leeds.

Measuring thermal degradation of a polyol ester lubricant in liquid phase

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 44(15), 5455–5464.

Quartz crystal microbalance in elevated temperature viscous liquids: Temperature effect compensation and lubricant degradation monitoring

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 268(1-3), 30–39.

The use of niche market strategy by US textile and apparel firms

Journal of the Textile Institute, 96(2), 77–85.

Warp break detection in Jacquard weaving

Textile Asia, 36(7), 29–34.

Warp breaks detection in Jacquard weaving using MEMS

A new era: National Textile Center Forum, March 20-22, 2005: Textile Institute, 84th Annual World Conference, March 22-25, 2005, Back-to-Back Meetings in Raleigh, North Carolina, USA, 1–18. [Manchester, England]: The Textile Institute.

Yarn quality beauty is in the eye of the beholder

Indian Journal of Fibre & Textile Research, 30(4), 353–354.

Automation of warp break repair

"Quality textiles for quality life" : proceedings of the Textile Institute 83rd World Conference (83rd TIWC) : May 23-27, 2004, Shanghai, China, 1345–1349. Manchester, UK: Textile Institute.

Automation of warp break repair: Warp break location and frequency in Jacquard weaving

83rd Textile Institute World Conference, Shanghai China, May 2004. Manchester, UK: Textile Institute.

ITMA 2003 technology: Spinning

Textile World (New York, N.Y.), 154(1), 32–39.

Influence of fiber type on fiberweb properties in high-speed carding

International Nonwovens Journal, 13(2), 48–53.

Modeling of niche market behavior of US textile and apparel firms

Journal of Textile and Apparel Technology and Management, 4(2).

Novel testing system for evaluating the thermal stability of polyol ester lubricants

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 43(21), 6638–6646.

Opportunities in the international textile and apparel marketplace for niche markets

Journal of Fashion Marketing and Management, 8(1), 41–57.

The mechanism of crimp removal in synthetic staple fibers - Part 1: Crimp geometry and the load-extension curve

TEXTILE RESEARCH JOURNAL, 74(4), 343–350.

The mechanism of crimp removal in synthetic staple fibers - Part II: Correlating single fiber crimp and carding parameters

TEXTILE RESEARCH JOURNAL, 74(5), 387–393.

Applying information engineering methodology for decision making in textiles

7th Asian Textile Conference, New Delhi, India, December 2003.

Developments in spinning

Textile World (New York, N.Y.), 34–37.

Italian textile technology - machines Italia: Spinning

Textile World (New York, N.Y.), 153(6).

Machines Italia

Textile World (New York, N.Y.), 153(6), 34–45.

Spinning machinery at ITMA

Journal of Textile and Apparel Technology and Management, 3(3), 1–6.

The effect of NAFTA on US spinning industry

AUTEX Research Journal, 3(3), 148–152.

Vortex spun yarns vs. air-jet spun yarn

AUTEX Research Journal, 3(3), 96–101.

A new electro-mechanical method for measuring yarn thickness

AUTEX Research Journal, 2/1.

Analysis of the current approaches to international plan location selection

Proceedings of the IFFTI International Conference, Hong Kong, November 2002. [Hong Kong: Institute of Textiles and Clothing, the Hong Kong Polytechnic University].

Analyzing structural and physical properties of ring, rotor, and friction spun yarns

TEXTILE RESEARCH JOURNAL, 72(2), 156–163.

Characterization of single fiber crimp using fiber load-extension behavior

Conference proceedings: Joint INDA-TAPPI Conference, INTC 2002, International Nonwovens Technical Conference, September 24-26, 2002, Renaissance Waverly Hotel, Atlanta, Georgia., 1–10. Atlanta, Ga. : TAPPI.

Current and future trend in yarn production

Journal of Textile and Apparel Technology and Management, 2(2), 1–10.

Current and future trends in yarn production

Through the eye of a needle, advances in fibre, fashion and fabric : Textile Institute 82nd World Conference : 23 to 27th March, 2002, Cairo International Conference Centre, 1–8. Manchester, England: Textile Institute.

Evaluating thermal degradation of textile finishing aids using GC and QCM

Proceedings of the 2002 National Conference on Environmental Science and Technology : Greensboro, North Carolina, September 8-10, 2002, 243–251. Columbus, Ohio: Battelle Press.

Monitoring thermal stability of textile processing aids using a quartz crystal microbalance

In C.C. Liu & H. B. Martin (Eds.), Proceedings of the Topical Conference on Sensor Technology : 2002 AICHE Annual Meeting, Indianapolis, Nov. 3 - 8 (pp. 74–79). New York, NY: AIChE.

Outlook for the U.S. short staple yarn industry

Journal of Textile and Apparel Technology and Management, 2(3), 1–8.

Carding of microfibers

Journal of Textile and Apparel Technology and Management, 1(2), 1–9.

Challenging tradition

America's Textile Industries, 30(1), 20–25.

Data mining in textile spinning operations

1–6.

Data mining in textiles

An odyssey in fibres and space: Textile Institute 81st World Conference: Melbourne, Australia, Melbourne Convention Centre, Sunday 1st-Wednesday 4th April, 2001. Manchester, England: The Textile Institute.

Fasciated yarns - a revolutionary development

Journal of Textile and Apparel Technology and Management, 1(2), 1–7.

Formation of carded webs from microfibers

International Nonwovens Journal, 10(1), 18–23.

Future trends in staple yarn production

1–12.

Infomation engineering & effective decision-making: The textile industry

Infomation engineering & effective decision-making: The textile industry. An odyssey in fibres and space : Textile Institute 81st World Conference : Melbourne, Australia, Melbourne Convention Centre, Sunday 1st-Wednesday 4th April, 2001. Manchester, England : Textile Institute.

Information engineering & effective decision-making: The textile industry link

Information engineering & effective decision-making: The textile industry link. An odyssey in fibres and space: Textile Institute 81st World Conference: Melbourne, Australia, Melbourne Convention Centre, Sunday 1st-Wednesday 4th April, 2001, 1–12. Manchester, England: The Textile Institute.

Information engineering approach for decision-making in textiles

2001 Conference on Information Quality, MIT, November 2001.

Smart sensor to monitor warp tension and breaks on a weaving machine

1–12.

Smart sensors to monitor warp tension and breaks on a loom

Smart sensors to monitor warp tension and breaks on a weaving machine

An odyssey in fibres and space : Textile Institute 81st World Conference : Melbourne, Australia, Melbourne Convention Centre, Sunday 1st-Wednesday 4th April, 2001. Manchester, England : Textile Institute.

The mechanics of crimp removal in synthetic staple fibers

Innovation & globalization : proceedings, Hong Kong, August 22-24, 2001, 1–8. Hong Kong: Federation of Asian Professional Textile Associations.

The role of fiber finish on drafting behavior

Journal of Textile and Apparel Technology and Management, 1(3), 1–8.

ATME-I 2000: Exhibitor overview

America's Textile Industries, 29(12), 26–34.

ATME-I 2000: Two many?

America's Textile Industries, 29(12), 20–25.

Application of micromachines to textiles: Using smart sensors to monitor warp tension and breaks during formation of woven fabrics

Proceedings of the International Mechanical Engineering Congress & Exposition, ASME, Orlando (FL), November 2000. New York: ASME.

Assessing the frictional characteristics of fibers by compression technique

Papers presented at the 80th World Conference of the Textile Institute, April 2000, 1–12. Manchester, England: Textile Institute.

Can information engineering enhance information quality for effective decision-making in textiles?

In B. D. Klein & D. F. Rossin (Eds.), Proceedings of the 2000 Conference on Information Quality. Cambridge, MA: Massachusetts Institute of Technology.

Data mining: Its current status and potential end uses

In Manchester 2000 CD-ROM: Papers from the 2000 Annual (80th) World Conference of The Textile Institute, April 16-19, 2000.

Data mining: Its current status and potential end uses

80th World Conference of Textile Institute, Manchester, England, April 16-19, 2000, 1–10. Manchester, UK: Textile Institute.

Developments in carding

INTC2000 : book of papers : joint INDA-TAPPI Conference : International Nonwovens Technical Conference : September 26-28, 2000, Hotel Inter-Continental, Dallas, Texas., 52.0–52.6. Cary, NC: INDA, Association of the Nonwoven Fabrics Industry.

ITMA review - staple spinning

Textile Progress, 30(1/2), 1–12.

Information engineering: Enhancing decision effectiveness in textiles?

Information engineering: enhancing decision effectiveness in textiles?

80th World Conference of Textile Institute, Manchester, England, April 16-19, 2000. Manchester, UK: Textile Institute.

Managing textile waste

Ars Textrina, 33, 87–105.

Micromachines and textiles: Matching two industries

Micromachines and textiles: Matching two industries

Textile Asia, 31, 58–66.

Open-end vs. ring-spun pricing

America's Textile Industries, 29(9).

Preparing for change

America's Textile Industries, 29(4), 59–62.

The abrasion characteristics of cotton yarns

Beltwide Cotton Conferences. Proceedings, 803–808.

The abrasive properties of yarns

Papers presented at the 80th World Conference of the Textile Institute, April 2000, 1–11. Manchester, England: Textile Institute.

The assessment of cross card openness uniformity of a fiber feed matt

International Nonwovens Journal, 9(4), 9–14.

The assessment of cross machine openness uniformity of a fiber feed matt

International Nonwovens Journal, 9(4), 9–14.

The mechanics of removing staple fiber crimp

Papers presented at the 80th World Conference of the Textile Institute, April 2000, 1–10. Manchester, England: Textile Institute.

A novel technique for assessing the frictional characteristics of fibers - part 1: Development of instrument

Proceedings of the Sixth International Conference on Mechatronics and Machine Vision in Practice: 1 - 3 September 1999, Middle East Technical University, Ankara, Turkey. Ankara : Mechanical Engineering Dep., Middle East Technical University.

A novel technique for assessing the frictional characteristics of fibers - part 2: Evaluation of the instrument

Proceedings of the Sixth International Conference on Mechatronics and Machine Vision in Practice: 1 - 3 September 1999, Middle East Technical University, Ankara, Turkey. Ankara : Mechanical Engineering Dep., Middle East Technical University.

Analysis of mechanical and electrical noise interfacing the instrument during data acquisition: Development of a machine for assessing surface properties of fibers

IEEE ... Annual Textile, Fiber, and Film Industry Technical Conference, (1999), 1–5.

Can information engineering enhance the efficacy of decision-making in the textile industry?

ITS Textile Leader, (1999 Aug.).

Can information engineering pave way to better decision-making in the textile industry?

ITS Textile Leader, 3(1999 Sept.), 10–16.

Carding of microfibers

Beltwide Cotton Conferences. Proceedings, 2(1999), 1353–1358.

Carding of microfibers II

Book of papers: INDA-TEC 99, International Nonwovens Conference, September 21-23, 1999, Renaissance Waverly Hotel, Atlanta, Georgia, USA. Cary, N.C. : INDA, Association of the Nonwoven Fabrics Industry.

Data requirements for staple spinning frames (results of a survey of US spinners)

JOURNAL OF THE TEXTILE INSTITUTE, 90(2), 136–146.

ITMA review in spinning

II Conferencia Internacional Textil/Confeccao: 21/23 julho 1999, Rio de Janeiro = 2nd International Textile and Apparel Conference: 21/23 July 1999, Rio de Janeiro, (1999 July). Rio de Janeiro: SENAI/CETIQT.

Information engineering: Textile industry?s value adding key to effective decision-making

Interdependence of fibre type and the design of the nozzle of air-jet spinning machine

Indian Journal of Fibre & Textile Research, 24(1), 10–15.

Processing of microfibers

Beltwide Cotton Conferences. Proceedings.

Spinning's predicted growth

America's Textile Industries, 28(1), 54–58.

The abrasion characteristics of ring-spun and open-end yarns

Proceedings : November 4 - 5, 1999, Raleigh, North Carlolina, 1–13. Cary, NC : Cotton Incorporated.

A correlation between tensile yarn parameters and production characteristics

Beltwide Cotton Conferences. Proceedings, 1(1998), 809–816.

Techniques to assess yarn tensile properties

Beltwide Cotton Conferences. Proceedings, 1(1998), 790–796.

The analysis of yarn thin places and unevenness with an image-analysis system and program design

JOURNAL OF THE TEXTILE INSTITUTE, 89(1), 44–58.

Data requirements for staple spinning

Textiles and the information society: Papers presented at the 78th World Conference of the Textile Institute in association with the 5th Textile Symposium of SEVE and SEPVE. Manchester: Textile Institute.

Developments in carding technology

Textile Technology International, (1997), 59.

Yarn tensile testing

Proceedings : November 6 - 7, 1997, Raleigh, North Carolina, 183–209. Raleigh, NC : Cotton Incorporated.

Improving the bulk of worsted yarns part 1: A basic bulking method

Journal of the Textile Institute, 97(3), 438–443.

Improving the bulk of worsted yarns part 2: Simultaneous bulking and spinning

Journal of the Textile Institute, 97(3), 44–48.

The physical properties of composite yarns produced by an electrostatic filament-charging method

JOURNAL OF THE TEXTILE INSTITUTE, 87(1), 78–96.

A Novel technique for assessing the frictional characteristics of cotton

Beltwide Cotton Conferences. Proceedings, 2, 1254–1257.

ATMI data survey

Advances in instrumentation and control: Proceedings of the ISA International Conference, New Orleans, La., 1995. Research Triangle Park, NC: Instrument Society of America.

CIM in spinning

Textile Asia, 26(12), 47–54.

Composite yarns by a new technique, Part I

Man-Made Textiles in India, 264–268.

Composite yarns by a new technique, Part II

Man-Made Textiles in India, 305–309.

Composite yarns by a new technique, Part III

Man-Made Textiles in India, 345–348.

Filament yarns

ITMA '95 review, 113–121. Raleigh, NC: NCSU College of Textiles.

THE POTENTIAL OF FALSE TWIST TO ASSIST IN HANDLING LOW STRENGTH COTTON SLIVERS

TEXTILE RESEARCH JOURNAL, 65(7), 423–426.

Using Advanced Fiber Information System to Monitor Fiber-Process Interactions

Beltwide Cotton Conferences. Proceedings, 2, 2409–2413.

INFLUENCE OF PRODUCTION SPEED ON THE TENACITY AND STRUCTURE OF FRICTION SPUN YARNS

TEXTILE RESEARCH JOURNAL, 64(4), 185–189.

PREDICTING END BREAKAGE RATES IN WORSTED SPINNING .1. MEASURING DYNAMIC YARN STRENGTH AND TENSION

TEXTILE RESEARCH JOURNAL, 64(11), 619–626.

PREDICTING END BREAKAGE RATES IN WORSTED SPINNING .2. A NEW MODEL FOR END BREAK PREDICTION

TEXTILE RESEARCH JOURNAL, 64(12), 717–722.

Spinning speed and yarn qualities

Textile Asia, 25(9), 57–62.

THE USE OF AN IMAGE-ANALYSIS TECHNIQUE FOR ASSESSING THE STRUCTURAL PARAMETERS OF FRICTION SPUN YARNS

JOURNAL OF THE TEXTILE INSTITUTE, 85(3), 383–388.

The influence of production speed on the characteristics of hollow spindle fancy yarns

Textile Research Journal, 64(7), 380–387.