Works (25)

Updated: November 7th, 2023 15:01

2023 journal article

Developing super-hydrophobic and corrosion-resistant coating on magnesium-lithium alloy via one-step hydrothermal processing

JOURNAL OF MAGNESIUM AND ALLOYS, 11(4), 1422–1439.

By: G. Wang, D. Song, Y. Qiao, J. Cheng, H. Liu, J. Jiang, A. Ma, X. Ma

author keywords: Magnesium-lithium alloy; Super-hydrophobic coating; One -step hydrothermal process; Corrosion resistance; Multiscale microstructure
Source: Web Of Science
Added: July 10, 2023

2021 personal communication

Achieving high hetero-deformation induced (HDI) strengthening and hardening in brass by dual heterostructures

Fang, X. T., Li, Z. K., Wang, Y. F., Ruiz, M., Ma, X. L., Wang, H. Y., … Zhu, Y. T. (2022, January 30).

By: X. Fang n, Z. Li n, Y. Wang n, M. Ruiz n, X. Ma*, H. Wang n, Y. Zhu n, R. Schoell n ...

Contributors: X. Fang n, Z. Li n, Y. Wang n, M. Ruiz n, X. Ma*, H. Wang n, Y. Zhu n, R. Schoell n ...

Sources: Web Of Science, NC State University Libraries, ORCID
Added: January 10, 2022

2021 journal article

Length-dependent carbon nanotube film structures and mechanical properties

NANOTECHNOLOGY, 32(26).

By: L. Zhang*, X. Ma*, Y. Zhang, P. Bradford* & Y. Zhu*

author keywords: carbon nanotube film; carbon nanotube length; microstructures; mechanical properties
TL;DR: It has been unveiled that the determinant effect of the CNT alignment on the film mechanical properties is more significant than that of the film packing density. (via Semantic Scholar)
Sources: Web Of Science, NC State University Libraries
Added: April 26, 2021

2020 journal article

Microstructure and deformation behavior of a novel steel rebar: Effect of the heterogeneous microstructure of soft ferrite and Hard bainite

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 9(6), 12281–12292.

By: D. Song*, G. Wang*, F. Yang*, H. Chen*, N. Liang*, H. Ma*, J. Jiang*, X. Ma n

author keywords: Alloyed steel rebar; Dual-Phase steel; Heterogeneous materials; Mechanical performance; Hetero-Deformation induced hardening; EBSD characterization
UN Sustainable Development Goal Categories
14. Life Below Water (OpenAlex)
Source: Web Of Science
Added: February 8, 2021

2019 journal article

In-situ observation of dislocation dynamics near heterostructured interfaces

MATERIALS RESEARCH LETTERS, 7(9), 376–382.

By: H. Zhou*, C. Huang*, X. Sha*, L. Xiao*, X. Ma n, H. Hoeppel, M. Goeken, X. Wu* ...

author keywords: Heterostructured materials; deformation mechanism; Frank-Read source; in-situ TEM
Sources: Web Of Science, NC State University Libraries
Added: July 1, 2019

2019 journal article

Simultaneously improving corrosion resistance and mechanical properties of a magnesium alloy via equal-channel angular pressing and post water annealing

MATERIALS & DESIGN, 166.

author keywords: Magnesium alloy; High strength and corrosion resistance; Materials processing; Heterogeneous microstructure
UN Sustainable Development Goal Categories
6. Clean Water and Sanitation (OpenAlex)
Source: Web Of Science
Added: February 25, 2019

2019 journal article

Solute segregation assisted nanocrystallization of a cold-rolled Mg-Ag alloy during annealing

SCRIPTA MATERIALIA, 177, 69–73.

author keywords: Nanocrystalline materials; Mg alloy; Transmission electron microscopy; Interfacial segregation
Sources: Web Of Science, NC State University Libraries
Added: December 30, 2019

2018 journal article

The formation mechanism of a novel interfacial phase with high thermal stability in a Mg-Gd-Y-Ag-Zr alloy

ACTA MATERIALIA, 162, 214–225.

By: L. Xiao*, Y. Cao*, S. Li*, H. Zhou*, X. Ma n, L. Mao*, X. Sha*, Q. Wang* ...

author keywords: Magnesium alloy; Grain boundary segregation; Interfacial phase; HAADF-STEM
Sources: Web Of Science, NC State University Libraries, ORCID
Added: December 3, 2018

2017 journal article

Decreasing bio-degradation rate of the hydrothermal-synthesizing coated mg alloy via pre-solid-solution treatment

Materials, 10(8).

By: D. Song, C. Li, L. Zhang, X. Ma, G. Guo, F. Zhang, J. Jiang, A. Ma

Source: NC State University Libraries
Added: August 6, 2018

2016 journal article

Effect of triple junctions on deformation twinning in a nanostructured Cu-Zn alloy: A statistical study using transmission Kikuchi diffraction

Beilstein Journal of Nanotechnology, 7, 1501–1506.

By: S. Liu, X. Ma, L. Li, L. Zhang, P. Trimby, X. Liao, Y. Li, Y. Zhao, Y. Zhu

Source: NC State University Libraries
Added: August 6, 2018

2016 journal article

Hydrothermal synthesis and corrosion behavior of the protective coating on Mg-2Zn-Mn-Ca-Ce alloy

Progress in Natural Science, 26(6), 590–599.

By: D. Song, G. Guo, J. Jiang, L. Zhang, A. Ma, X. Ma, J. Chen, Z. Cheng

Source: NC State University Libraries
Added: August 6, 2018

2016 journal article

Mechanical properties of copper/bronze laminates: Role of interfaces

ACTA MATERIALIA, 116, 43–52.

By: X. Ma n, C. Huang*, J. Moering n, M. Ruppert*, H. Hoeppel, M. Goeken, J. Narayan n, Y. Zhu n

author keywords: Interface; Laminate structure; Geometrically necessary dislocation (GND); Interface-affected zone; Back stress hardening
Sources: Web Of Science, NC State University Libraries, ORCID
Added: August 6, 2018

2016 journal article

Microstructure characteristic and electrochemical corrosion behavior of surface nano-crystallization modified carbon steel

Journal of Iron and Steel Research International, 23(12), 1281–1289.

By: Z. Cheng, D. Song, J. Jiang, J. Jiang, X. Ma, K. You, A. Ma

Source: NC State University Libraries
Added: August 6, 2018

2016 journal article

Nucleation of deformation twins in nanocrystalline fcc alloys

PHILOSOPHICAL MAGAZINE, 96(36), 3790–3802.

By: X. Fang n, X. Ma n, L. Zhang n & Y. Zhu n

author keywords: Deformation twinning; nanomaterials; alloys; grain size
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2016 journal article

Strength and ductility of gradient structured copper obtained by surface mechanical attrition treatment

MATERIALS & DESIGN, 105, 89–95.

By: Z. Yin*, X. Yang*, X. Ma n, J. Moering n, J. Yang*, Y. Gong*, Y. Zhu n, X. Zhu*

author keywords: Gradient structure; Mechanical properties; Mobile dislocation density; Synergetic strengthening; Pure copper; Surface mechanical attrition treatment
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2016 journal article

Synergetic strengthening far beyond rule of mixtures in gradient structured aluminum rod

SCRIPTA MATERIALIA, 122, 106–109.

By: J. Moering n, X. Ma n, J. Malkin*, M. Yang*, Y. Zhu n & S. Mathaudhu*

author keywords: Gradient structure; Strength and ductility; Surface hardening; Mechanical incompatibility; Multiaxial stress states
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

Alloying effect on grain-size dependent deformation twinning in nanocrystalline Cu-Zn alloys

PHILOSOPHICAL MAGAZINE, 95(3), 301–310.

By: X. Ma n, W. Xu n, H. Zhou n, J. Moering n, J. Narayan n & Y. Zhu*

author keywords: grain size; nanomaterials; alloys; stacking-fault energy; deformation twinning
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

Effect of Ag on interfacial segregation in Mg-Gd-Y-(Ag)-Zr alloy

ACTA MATERIALIA, 95, 20–29.

By: H. Zhou, G. Cheng n, X. Ma n, W. Xu n, S. Mathaudhu*, Q. Wang*, Y. Zhu n

author keywords: Magnesium alloys; Interface; Segregation; HAADF-STEM; Crystal structure
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

Finite element simulation and experimental investigation on homogeneity of Mg-9.8Gd-2.7Y-0.4Zr magnesium alloy processed by repeated-upsetting

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 225, 310–317.

author keywords: Severe plastic deformation (SPD); Repetitive upsetting (RU); Finite element modeling (FEM); Magnesium alloys; Homogeneity
Source: Web Of Science
Added: August 6, 2018

2015 journal article

Influence of gradient structure volume fraction on the mechanical properties of pure copper

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 645, 280–285.

By: X. Yang*, X. Ma n, J. Moering n, H. Zhou n, W. Wang*, Y. Gong*, J. Tao*, Y. Zhu n, X. Zhu*

author keywords: Gradient structure; Strength; Ductility; Synergetic strengthening
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles

Nature, 528(7583), 539-.

By: L. Chen, J. Xu, H. Choi, M. Pozuelo, X. Ma, S. Bhowmick, J. Yang, S. Mathaudhu, X. Li

Source: NC State University Libraries
Added: August 6, 2018

2015 journal article

Stacking-fault energy effect on zero-strain deformation twinning in nanocrystalline Cu-Zn alloys

SCRIPTA MATERIALIA, 109, 89–93.

By: X. Ma n, H. Zhou n, J. Narayan n & Y. Zhu n

author keywords: Deformation twin; Zero-strain twinning; Nanocrystalline alloy; Stacking-fault energy
UN Sustainable Development Goal Categories
7. Affordable and Clean Energy (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

Strain hardening and ductility in a coarse-grain/nanostructure laminate material

SCRIPTA MATERIALIA, 103, 57–60.

By: X. Ma n, C. Huang*, W. Xu n, H. Zhou n, X. Wu* & Y. Zhu n

author keywords: Laminate structure; Strain hardening; Ductility; Nanostructure; Interface
UN Sustainable Development Goal Categories
11. Sustainable Cities and Communities (OpenAlex)
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2015 journal article

The role of shear strain on texture and microstructural gradients in low carbon steel processed by Surface Mechanical Attrition Treatment

SCRIPTA MATERIALIA, 108, 100–103.

By: J. Moering n, X. Ma n, G. Chen, P. Miao, G. Li, G. Qian, S. Mathaudhu*, Y. Zhu n

author keywords: Shear strain; Gradient; Texture; Microstructure; Hardness
Sources: Web Of Science, NC State University Libraries
Added: August 6, 2018

2014 journal article

Enhanced mechanical properties in Cu-Zn alloys with a gradient structure by surface mechanical attrition treatment at cryogenic temperature

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 626, 144–149.

By: B. Cai*, X. Ma n, J. Moering n, H. Zhou n, X. Yang* & X. Zhu*

author keywords: Cu-Zn alloys; Cryogenic temperature; Gradient structure; Mechanical properties; Surface mechanical attrition treatment
Source: Web Of Science
Added: August 6, 2018

Citation Index includes data from a number of different sources. If you have questions about the sources of data in the Citation Index or need a set of data which is free to re-distribute, please contact us.

Certain data included herein are derived from the Web of Science© and InCites© (2024) of Clarivate Analytics. All rights reserved. You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.