Yasir Nawab
Composite Materials; Natural Fiber Composites; Technical Textiles; Textile; 3D woven fabrics
Currently working as Professor at National Textile University, Pakistan, a PhD in Mechanical Engineering with focus on composite materials from Université de Nantes France, have experience of working with known European industrial groups dealing with composite materials and ONERA (The French Aerospace Lab). Currently working as an Assistant Professor, teaching undergraduate, MS and PhD level classes and doing research on 2D, 3D textile fabrics, finite element analysis and composite materials.
Works (211)
2025 journal article
Bio-based thermal insulating panels for clothing using domestic parakeet feathers as filling: a comparative study
Biomass Conversion and Biorefinery.
Contributors: M. Jabbar *, N. Ain *, A. Qayyum*, A. Siddique *, M. Umair *, K. Shaker *, *
2025 article
Valorizing denim and Polyethylene sheet waste to fiber-reinforced composites
Khan, R. M. W. U., Seyam, A. F. M., Hussain, M., & Nawab, Y. (2025, February 28). POLYMER COMPOSITES, Vol. 2.
2024 journal article
A Fibrous Nonwoven Hydrogel Composite for Shoe Insole with Enhanced Mechanical and Comfort Properties
Journal of Polymers and the Environment.
Contributors: F. Azam *, H. Ali*, F. Ahmad *, A. Rasheed *, S. Ahmad *, M. Ali*, *
2024 journal article
A biodegradable alginate/chitosan hydrogel based nonwoven from pre-consumer cotton waste and virgin wool for food packaging
Industrial Crops and Products.
Contributors: F. Ahmad *, A. Hassan*, B. Mushtaq*, F. Azam *, S. Ahmad *, A. Rasheed *, *
2024 journal article
An Investigation of Static and Dynamic Mechanical Properties of Eco-Friendly Textile PLA Composites Reinforced by Flax Woven Fabrics
International Journal of Polymer Science.
open access via doi.org (publisher)2024 journal article
An eco-friendly enzymatic treatment to prepare spinnable banana fibers as an alternative to cotton for textile applications
International Journal of Biological Macromolecules.
Contributors: B. Mushtaq*, * , S. Ahmad * & F. Ahmad*
2024 journal article
An eco-friendly hydroentangled cotton non-woven membrane with alginate hydrogel for water filtration
International Journal of Biological Macromolecules.
Contributors: F. Ahmad *, A. Nosheen*, M. Atiq*, B. Mushtaq*, S. Ahmad *, F. Azam *, A. Rasheed *, *
2024 journal article
Applications and environmental impact of biodegradable polymers in textile industry: A review
International Journal of Biological Macromolecules.
Contributors: S. Razzaq*, S. Shahid * & *
2024 journal article
Artificial-Neural-Network-Based Predicted Model for Seam Strength of Five-Pocket Denim Jeans: A Review
Textiles.
2024 journal article
Effect of fillers and weave architecture hybridization on the impact performance of 3D woven hybrid green composites
Polymer Composites.
Contributors: M. Safdar*, M. Khan *, T. Ullah *, K. Shaker *, * , Z. Rizwan *, M. Asghar*, M. Umair *
2024 journal article
Effect of gradual thermoforming pressure on the mechanical properties of jute/polypropylene commingled composites
Journal of Composite Materials.
Contributors: M. Asghar*, * , A. Imad *, A. Saouab *, M. Hussain * & C. Herbelot*
2024 journal article
Impact of weave architecture on the mechanical performance of carbon-aramid/PVB hybrid composites
Journal of Engineered Fibers and Fabrics.
Contributors: K. Shaker *, A. Abbas *, * , M. Umair *, M. Khan *, Z. Zubair *, H. Awais *
2024 journal article
Influence of honeycomb structures on fluids transmission and heat retention properties; An initiative towards stretchable weaves
JOURNAL OF INDUSTRIAL TEXTILES, 54.
2024 journal article
Multilayer composites for improved mechanical performance of flexible rapier tape
Journal of the Textile Institute.
Contributors: H. Zubair*, M. Asghar*, S. Hamdani *, M. Zubair * & *
2024 journal article
Rebound characteristics of flexible and stiff jute rubber/epoxy hybrid composite under low-velocity impact
Journal of Reinforced Plastics and Composites.
Contributors: H. Iftekhar*, M. Nazir*, A. Mehboob*, K. Majeed *, * & Z. Ali *
2024 journal article
Recent advancements in polyurethane-based membranes for gas separation
Environmental Research.
Contributors: N. Arshad*, S. Batool *, S. Razzaq*, M. Arshad*, A. Rasheed *, M. Ashraf *, * , M. Nazeer *
2024 journal article
Shaping sustainable pathways: Enhancing mechanical properties of biocomposite through tannic acid treatment of flax fabrics
International Journal of Biological Macromolecules.
Contributors: M. Butt *, K. Shaker *, M. Asghar*, A. Abbas *, * & S. Rasul *
2023 journal article
A Novel Composite of Hemp Fiber and Alginate Hydrogel for Wound Dressings
Journal of Polymers and the Environment.
Contributors: F. Ahmad *, B. Mushtaq*, S. Ahmad *, A. Rasheed * & *
2023 journal article
A review of joining techniques for thermoplastic composite materials
Journal of Thermoplastic Composite Materials.
Contributors: A. Siddique *, Z. Iqbal*, * & K. Shaker *
2023 journal article
Circularity in Materials: A Review on Polymer Composites Made from Agriculture and Textile Waste
International Journal of Polymer Science.
Contributors: A. Shafqat *, M. Hussain *, * , M. Ashraf *, S. Ahmad * & G. Batool *
2023 journal article
Delamination Characteristics of Aluminum-Composite Bonds: Impact of Reinforcements and Matrices
International Journal of Polymer Science.
Contributors: M. Hussain *, A. Imad *, A. Saouab *, A. Abbas *, T. Kanit *, S. Shahid *, *
2023 journal article
Development and characterization of impact resistant fabric with better comfort for motorbike riders
Journal of the Textile Institute.
Contributors: H. Jamal*, F. Ahmad *, F. Azam *, M. Umair *, S. Ahmad *, * , A. Rasheed *, T. Ullah *
2023 journal article
Effect of Cellulosic Material and Weave Design on Comfort Performance of Woven Fabrics
Journal of Natural Fibers.
Contributors: M. Riaz*, M. Khan *, K. Shaker *, * & M. Umair *
2023 journal article
Effect of Surface Treatment on Stiffness and Damping Behavior of Metal-Metal and Composite-Metal Adhesive Joints
Polymers.
Contributors: A. Nasreen *, M. Bangash *, K. Shaker * & *
2023 journal article
Effect of shear thickening fluid on mechanical properties of para-aramid fabrics
Journal of the Textile Institute.
Contributors: M. Khan *, M. Umair *, R. Hussain & *
2023 journal article
Influence of tetrahedral architectures on fluid transmission and heat retention behaviors of auxetic weaves
Thermal Science and Engineering Progress.
Contributors: R. Khan *, M. Hussain *, * & M. Umair *
2023 journal article
Investigation of impact properties of para-aramid composites made with a thermoplastic-thermoset blend
Journal of Thermoplastic Composite Materials.
Contributors: M. Khan *, M. Umair *, R. Hussain, M. Karahan* & *
2023 journal article
Mechanical Performance of Glass/Epoxy Composites Loaded with Silane-Treated Aluminum Hydroxide Fillers
Polymers.
2023 journal article
Optimization of percolation limit of carbon black for electromagnetic interference shielding
Journal of Magnetism and Magnetic Materials.
Contributors: A. Maryam*, Z. Rizwan *, N. Nasir*, J. Ahmad*, M. Khan *, * , H. Ahmad *
2023 journal article
Optimization of the novel jute retting process to enhance the fiber quality for textile applications
Heliyon.
Contributors: B. Mushtaq*, F. Ahmad *, * & S. Ahmad *
2023 journal article
Recent Developments in Materials and Manufacturing Techniques Used for Sports Textiles
International Journal of Polymer Science.
Contributors: F. Ahmad *, K. Akhtar*, W. Anam*, B. Mushtaq*, A. Rasheed *, S. Ahmad *, F. Azam *, *
2023 journal article
Recent advances in electromagnetic interference (EMI) shielding textiles: A comprehensive review
Synthetic Metals.
Contributors: S. Akram*, M. Ashraf *, A. Javid *, H. Abid *, S. Ahmad *, * , A. Rasheed *, Z. Xue *, A. Nosheen*
2023 journal article
Recent progress in thermal and acoustic properties of natural fiber reinforced polymer composites: Preparation, characterization, and data analysis
Polymer Composites.
Contributors: B. Dev *, M. Rahman *, M. Repon *, M. Rahman *, A. Haji * & *
2023 journal article
Scaling thermal and mechanical characteristics of woven honeycombs: A novel endeavor of simultaneous ridges and picking sequence variation
International Journal of Thermal Sciences.
Contributors: D. Baitab *, S. Riaz *, A. Abbas *, S. Zaman *, M. Zubair *, * , M. Umair *
2023 journal article
Shape distortion in composites: sources, characterization, and remedies
Mehran University Research Journal of Engineering and Technology.
2023 journal article
Study of fibre to fibre and ply to ply comingling technique for fabrication of natural fibre reinforced thermoplastic composites
Journal of the Textile Institute.
Contributors: M. Ameer*, * , S. Ahmad *, Z. Ali * & I. Abdellatif*
2023 journal article
Sunlight-Driven Photocatalytic Active Fabrics through Immobilization of Functionalized Doped Titania Nanoparticles
Polymers.
2022 journal article
A Review of the Fabrication Methods, Testing, and Performance of Face Masks
International Journal of Polymer Science.
Contributors: F. Azam *, F. Ahmad *, Z. Uddin *, A. Rasheed *, * , A. Afzal *, S. Ahmad *, M. Zafar *, M. Ashraf *
2022 journal article
An economical and environmentally benign approach to extract banana fibres from agricultural waste for fibre reinforced composites
Journal of the Textile Institute.
Contributors: H. Awais *, F. Ahmad *, F. Azam *, S. Shahid *, * & S. Ahmad *
2022 chapter
2022 journal article
Cellulosic Fillers Extracted from Argyreia Speciose Waste: A Potential Reinforcement for Composites to Enhance Properties
Journal of Natural Fibers.
Contributors: K. Shaker *, M. Umair *, S. Shahid *, M. Jabbar *, R. Ullah Khan *, M. Zeeshan *, *
2022 journal article
Damage-Tolerant Woven Glass Fiber Composites Developed Using Polyvinyl Butyral (PVB) Unsaturated Polyester (UP) Blends
Advances in Materials Science and Engineering.
Contributors: M. Ali *, M. Hussain *, A. Tariq *, H. Ahmed*, S. Shahid *, A. Saouab *, *
2022 journal article
Development and characterization of chemical and fire resistant jute/unsaturated polyester composites
Journal of the Textile Institute, 113(3), 484–493.
Contributors: S. Uz Zaman *, S. Shahid *, K. Shaker *, * , S. Ahmad *, M. Umair *, Z. Khaliq *, F. Azam *
2022 article
Development of Anti-Bacterial and Anti-Viral Nonwoven Surgical Masks for Medical Applications,Razvoj protibakterijskih in protivirusnih netkanih kirurških mask za medicinske namene
Tekstilec, Vol. 65, pp. 135–146.
Contributors: M. Ahrari*, M. Karahan*, M. Hussain *, * , A. Khan * & A. Shirazi*
2022 journal article
Development of functional (flame-retardant and anti-bacterial) and hybrid (carbon-glass/epoxy) composites with improved low velocity impact response
Polymer Composites, 43(2), 889–905.
Contributors: M. Hussain *, S. Arif*, * , K. Shaker * & M. Umair *
2022 journal article
Double face fabrics: a tailorable solution for puncture resistant applications
Journal of the Textile Institute, 113(6), 1197–1205.
Contributors: M. Hameed*, * , M. Zubair *, M. Umair *, Z. Ahmad * & K. Shaker *
2022 journal article
Effect of Different Dielectric and Magnetic Nanoparticles on the Electrical, Mechanical, and Thermal Properties of Unidirectional Carbon Fiber-Reinforced Composites
International Journal of Polymer Science, 2022.
Contributors: H. Ahmad *, T. Hussain *, * & S. Salamat
2022 journal article
Effect of Geometric Arrangement on Mechanical Properties of 2D Woven Auxetic Fabrics
Textiles.
2022 journal article
Effect of Hybridization Approach on Mechanical Performance of Jute-hemp/epoxy Hybrid Composite Laminates
Journal of Natural Fibers.
Contributors: A. Ahmad*, A. Moeed*, A. Tariq *, * , M. Farooq * & M. Umair *
2022 journal article
Effect of PEEK Particles on Physiomechanical Behavior of Carbon/Epoxy Composite
International Journal of Polymer Science, 2022.
Contributors: M. Rehman *, K. Shaker * & *
2022 journal article
Effect of dielectric and magnetic nanofillers on electromagnetic interference shielding effectiveness of carbon/epoxy composites
Journal of Composite Materials, 56(1), 69–82.
Contributors: H. Ahmad *, T. Hussain *, * & S. Salamat *
2022 journal article
Effect of matrix and hybrid reinforcement on fibre metal laminates under low–velocity impact loading
Composite Structures, 288.
Contributors: M. Hussain *, A. Imad *, * , A. Saouab *, C. Herbelot* & T. Kanit *
2022 journal article
Effect of picking sequence on thermo-physiological comfort of bilayer woven fabrics
Research Journal of Textile and Apparel.
Contributors: M. Nazir *, M. Javaid *, K. Shaker *, * , T. Hussain * & M. Umair *
2022 journal article
Effect of poly ether ether ketone particles on v-notched shear and drop weight impact behavior of carbon/epoxy composite
Polymer Composites, 43(5), 3219–3227.
Contributors: M. Rehman *, K. Shaker * & *
2022 journal article
Effect of surface treatment on the performance of composite-composite and composite-metal adhesive joints
Polymer Composites.
Contributors: A. Nasreen *, M. Bangash *, K. Shaker * & *
2022 journal article
Effect of various dielectric and magnetic nanofillers on microwave absorption properties of carbon fiber reinforced composites structures
Ceramics International, 48(14), 19882–19890.
Contributors: H. Ahmad *, T. Hussain *, * & S. Salamat *
2022 journal article
Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements
Mechanics of Advanced Materials and Structures, 29(1), 104–117.
Contributors: M. Umair *, K. Shaker *, M. Javaid *, M. Hussain *, M. Kashif * & *
2022 journal article
Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns
Crystals, 12(6).
Contributors: A. Shah*, M. Shahid *, J. Hardy *, N. Siddiqui, A. Kennedy *, I. Gul *, S. Rehman*, *
2022 chapter
Fruit, Seed and Leaf Fibers
In SpringerBriefs in Materials (pp. 21–32).
Contributors: K. Shaker * & *
2022 chapter
2022 journal article
Impact Performance of Three-dimensional Woven Composites with Novel Binding Yarn Patterns
Journal of Natural Fibers.
Contributors: M. Umair *, M. Hussain *, K. Shaker * & *
2022 journal article
Influence of inlay yarn type and stacking sequence on mechanical performance of knitted uni-directional thermoplastic composite prepregs
Journal of Industrial Textiles.
Contributors: Z. Azam *, H. Jamshaid *, * , R. Mishra *, M. Muller *, R. Choteborsky *, V. Kolar *, M. Tichy *, M. Petru *
2022 journal article
Investigating the Thermo-Physiological Comfort Properties of Weft-Knitted Smart Structures Having a Negative Poisson's Ratio
Advances in Materials Science and Engineering.
Contributors: M. Anas *, H. Awais *, S. Ali Hamdani *, K. Shaker *, Z. Azam * & *
2022 chapter
Lignocellulosic Fiber Structure
In SpringerBriefs in Materials (pp. 11–19).
Contributors: K. Shaker * & *
2022 journal article
Mechanical performance of 3D woven jute/green epoxy composites with novel weaving patterns
Journal of Industrial Textiles.
Contributors: M. Umair *, S. Hamdani *, M. Hussain * & *
2022 journal article
Mechanical performance of flame retardant and antibacterial glass-carbon/epoxy hybrid composites for furniture applications
Journal of Industrial Textiles.
Contributors: S. Arif*, * , K. Shaker * & M. Umair *
2022 journal article
Mode I Fatigue of Fibre Reinforced Polymeric Composites: A Review
Polymers.
Contributors: X. Gao *, M. Umair *, * , Z. Latif *, S. Ahmad *, A. Siddique *, H. Yang*
2022 journal article
Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications
Polymers, 14(1).
Contributors: R. Ilyas *, M. Zuhri *, H. Aisyah*, M. Asyraf *, S. Hassan*, E. Zainudin *, S. Sapuan *, S. Sharma *
2022 journal article
Numerical modeling of suspension impregnation through a fibrous medium: Application to the CRTM process
Journal of Reinforced Plastics and Composites.
Contributors: M. Mtibaa*, A. Saouab *, S. Bouaziz *, A. El Hami *, M. Haddar * & *
2022 journal article
Optimization of Flame Retardancy & Mechanical Performance of Jute-glass/Epoxy Hybrid Composites
Fibers and Polymers.
Contributors: M. Umair *, A. Shahbaz*, A. Ahmad*, S. Arif*, K. Shaker *, M. Jabbar *, *
2022 journal article
Optimizing the Auxetic Geometry Parameters in Few Yarns Based Auxetic Woven Fabrics for Enhanced Mechanical Properties Using Grey Relational Analysis
Journal of Natural Fibers.
Contributors: M. Zeeshan *, M. Ali *, R. Riaz *, A. Anjum *, * , M. Qadir *, S. Ahmad *
2022 chapter
Performance of Green Composites
In SpringerBriefs in Materials (pp. 57–65).
Contributors: K. Shaker * & *
2022 book
2022 journal article
Recent trends in water purification using electrospun nanofibrous membranes
International Journal of Environmental Science and Technology.
Contributors: Z. Uddin *, F. Ahmad *, T. Ullan*, * , S. Ahmad *, F. Azam *, A. Rasheed *, M. Zafar *
2022 journal article
The Role and Applications of Aerogels in Textiles
Advances in Materials Science and Engineering.
Contributors: F. Azam *, F. Ahmad *, Z. Ulker *, M. Zafar *, S. Ahmad *, A. Rasheed *, * , C. Erkey *
2022 journal article
Thermal properties of woven fabric as a function of its structural parameters: experimentation and modeling
Research Journal of Textile and Apparel.
Contributors: M. Umair *, M. Javaid *, * , M. Jabbar *, S. Riaz *, H. Abid *, K. Shaker *
2022 journal article
Thermo-physiological Comfort of Woven Fabrics Made from Different Cellulosic Yarns
Journal of Natural Fibers.
Contributors: M. Nazir *, K. Shaker *, * , S. Hamdani *, H. Abdullah & M. Umair *
2022 journal article
Three-dimensional printable metamaterial intramedullary nails with tunable strain for the treatment of long bone fractures
Materials & Design.
Contributors: A. Mehboob*, H. Mehboob *, * & S. Chang*
2022 chapter
Wood and Agriculture Waste Fibers
In SpringerBriefs in Materials (pp. 45–55).
Contributors: K. Shaker * & *
2021 journal article
Compression and recovery behavior of three-dimensional woven spacer composites
Journal of Industrial Textiles, 51(1), 93–109.
Contributors: M. Umair *, S. Hamdani *, * , M. Asghar* & T. Hussain *
2021 journal article
Development of 3D auxetic structures using para-aramid and ultra-high molecular weight polyethylene yarns
Journal of the Textile Institute, 112(9), 1417–1427.
Contributors: H. Ahmed*, M. Umair *, * & S. Hamdani *
2021 journal article
Effect of Barium Hexaferrites and Thermally Reduced Graphene Oxide on EMI Shielding Properties in Polymer Composites
Journal of Superconductivity and Novel Magnetism, 34(1), 201–210.
Contributors: K. Zubair *, M. Shakir *, A. Afzal *, Z. Rehan * & *
2021 journal article
Effect of Fabric Structure on the Performance of 3D Woven Pressure Sensor
Fibers and Polymers, 22(3), 847–853.
Contributors: K. Shaker *, M. Umair *, S. Hamdani * & *
2021 journal article
Effect of Micro-fillers on the Performance of Thermoplastic Para Aramid Composites for Impact Applications
Fibers and Polymers, 22(11), 3120–3134.
Contributors: M. Khan *, M. Umair *, R. Hussain* & *
2021 journal article
Effect of surface treatments on metal–composite adhesive bonding for high-performance structures: an overview
Composite Interfaces, 28(12), 1221–1256.
Contributors: A. Nasreen *, K. Shaker * & *
2021 journal article
Effect of the stuffer yarns on the mechanical performance of novel 3D woven green composites
Composite Structures, 269.
Contributors: M. Jabbar *, K. Shaker *, * & M. Umair *
2021 journal article
Effect of weave architecture and glass microspheres percentage on the low velocity impact response of hemp/green epoxy composites
Journal of Composite Materials, 55(16), 2179–2195.
Contributors: M. Umair *, M. Hussain *, Z. Abbas *, K. Shaker * & *
2021 journal article
Effect of yarn singeing and commingling on the mechanical properties of jute/polypropylene composites
Polymer Composites, 42(2), 828–841.
Contributors: M. Asghar*, A. Imad *, * , M. Hussain * & A. Saouab *
2021 journal article
Enhanced interlaminar shear and impact performance of woven carbon/epoxy composites interleaved with needle punched high performance polyethylene fiber nonwoven
Journal of Applied Polymer Science, 138(25).
Contributors: A. Jabbar *, A. Ahmad*, M. Adnan *, * , Z. Javed* & M. Irfan *
2021 journal article
Environmental benign natural fibre reinforced thermoplastic composites: A review
Composites Part C: Open Access, 4.
Contributors: H. Awais *, * , A. Amjad *, A. Anjang *, H. Md Akil * & M. Zainol Abidin *
2021 journal article
M-Type Barium Hexaferrite-Based Nanocomposites for EMI Shielding Application: a Review
Journal of Superconductivity and Novel Magnetism, 34(4), 1019–1045.
Contributors: M. Zahid *, S. Siddique*, R. Anum*, M. Shakir *, * & Z. Rehan *
2021 journal article
MOLECULAR INVESTIGATION AND PHYLOGENETIC ANALYSIS OF ANAPLASMOSIS IN DOGS
The Journal of Parasitology, 107(2), 295–303.
Contributors: H. Ghauri*, M. Ijaz *, A. Ahmed *, M. Muhammad Naveed *, * , M. Javed*, A. Ghaffar*
2021 journal article
Machine learning approach for prediction of crimp in cotton woven fabrics
Tehnicki Vjesnik, 28(1), 88–95.
Contributors: M. Fazal*, S. Khan *, M. Abbas *, * & S. Younis *
2021 journal article
Mode I fracture toughness of fiber-reinforced polymer composites: A review
Journal of Industrial Textiles, 50(8), 1165–1192.
Contributors: A. Siddique *, S. Abid *, F. Shafiq *, * , H. Wang *, B. Shi *, S. Saleemi *, B. Sun *
2021 journal article
Morphometry of leaf and shoot variables to assess aboveground biomass structure and carbon sequestration by different varieties of white mulberry (Morus alba L.)
Journal of Forestry Research, 32(6), 2291–2300.
Contributors: G. Bajwa, M. Umair *, * & Z. Rizwan *
2021 journal article
Optimization of mechanical/thermal properties of glass/flax/waste cotton hybrid composite
Journal of Industrial Textiles, 51(5), 768–787.
Contributors: M. Zeeshan *, M. Ali *, A. Anjum * & *
2021 journal article
Properties and characterization of novel 3D jute reinforced natural fibre aluminium laminates
Journal of Composite Materials, 55(14), 1879–1891.
Contributors: M. Hussain *, A. Imad *, A. Saouab *, T. Kanit *, * , C. Herbelot*, M. Kashif *
2021 journal article
Study of mechanical, electrical and EMI shielding properties of polymer-based nanocomposites incorporating polyaniline coated graphene nanoparticles
Nano Express, 2(1).
Contributors: K. Zubair *, A. Ashraf *, H. Gulzar*, M. Shakir *, * , Z. Rehan *, I. Rashid *
2021 journal article
Synthesis and characterization of nonwoven cotton-reinforced cellulose hydrogel for wound dressings
Polymers, 13(23).
Contributors: F. Ahmad *, B. Mushtaq*, F. Butt *, M. Zafar *, S. Ahmad *, A. Afzal *, * , A. Rasheed *, Z. Ulker *
2021 journal article
Thermal expansion coefficient: A macro-scale indicator of particle filtration in composites fabricated by resin infusion
Polymer Testing, 96.
Contributors: K. Shaker *, * , S. Shahid * & A. Saouab *
2020 journal article
Balantidium coli in domestic animals: An emerging protozoan pathogen of zoonotic significance
Acta Tropica, 203.
Contributors: A. Ahmed *, M. Ijaz *, R. Ayyub *, A. Ghaffar*, H. Ghauri*, M. Aziz *, S. Ali*, M. Altaf *
2020 journal article
Comparison of Mechanical Behavior of Biaxial, Unidirectional and Standard Woven Fabric Reinforced Composites
Fibers and Polymers, 21(6), 1308–1315.
Contributors: U. Ahmed *, A. Tariq *, * , K. Shaker *, Z. Khaliq * & M. Umair *
2020 journal article
Development of helical auxetic yarn with negative Poisson’s ratio by combinations of different materials and wrapping angle
Journal of Industrial Textiles.
Contributors: T. Ullah *, S. Ahmad * & *
2020 journal article
EMI Shielding Characteristics of Electrically Conductive Polymer Blends of PS/PANI in Microwave and IR Region
Journal of Electronic Materials, 49(3), 1660–1665.
Contributors: M. Shakir *, I. Abdul Rashid *, A. Tariq *, * , A. Afzal *, M. Nabeel*, A. Naseem*, U. Hamid*
2020 journal article
Effect of Nickel-spinal-Ferrites on EMI shielding properties of polystyrene/polyaniline blend
SN Applied Sciences, 2(4).
Contributors: M. Shakir *, A. Tariq *, Z. Rehan *, * , I. Abdul Rashid *, A. Afzal *, U. Hamid*, F. Raza *
2020 journal article
Effect of fabric architecture on the shear and impact properties of natural fibre reinforced composites
Composites Part B: Engineering, 195.
Contributors: H. Awais *, * , A. Anjang *, H. Md Akil * & M. Zainol Abidin *
2020 journal article
Effect of glass microspheres and fabric weave structure on mechanical performance of hemp/green epoxy composites
Polymer Composites, 41(11), 4771–4787.
Contributors: Z. Abbas *, S. Shahid *, * , K. Shaker * & M. Umair *
2020 journal article
Effect of the spatial variation of permeability on air bubble creation and compression
Journal of Reinforced Plastics and Composites.
Contributors: B. Aaboud*, L. Bizet *, A. Saouab * & *
2020 journal article
Effect on the EMI Shielding Properties of Cobalt Ferrites and Coal-Fly-Ash Based Polymer Nanocomposites
Journal of Superconductivity and Novel Magnetism, 33(11), 3519–3524.
Contributors: N. Gulzar*, K. Zubair *, M. Shakir *, M. Zahid *, * & Z. Rehan *
2020 journal article
Experimental and numerical investigation of reduction in shape distortion for angled composite parts
International Journal of Material Forming, 13(6), 897–906.
Contributors: K. Shaker *, * & A. Saouab *
2020 journal article
Extraction and characterization of novel fibers from Vernonia elaeagnifolia as a potential textile fiber
Industrial Crops and Products, 152.
Contributors: K. Shaker *, R. Waseem Ullah Khan *, M. Jabbar *, M. Umair *, A. Tariq *, M. Kashif *, *
2020 book
Fabrication and characterization of lightweight engineered polypropylene composites using silica particles and flax woven comingled structure
In Lecture Notes in Mechanical Engineering (pp. 403–410).
Contributors: H. Awais *, * , A. Amjad *, A. Anjang * & M. Zainol Abidin *
2020 journal article
Fabrication of reduced graphene oxide (RGO) and nanocomposite with thermoplastic polyurethane (TPU) for EMI shielding application
Journal of Materials Science: Materials in Electronics, 31(2), 967–974.
Contributors: M. Zahid *, * , N. Gulzar*, Z. Rehan *, M. Shakir *, A. Afzal *, I. Abdul Rashid *, A. Tariq *
2020 chapter
Fibers for Protective Textiles
In Topics in Mining, Metallurgy and Materials Engineering (pp. 65–91).
Contributors: K. Shaker * & *
2020 journal article
Impact of waste fibers on the mechanical performance of concrete composites
Journal of the Textile Institute.
Contributors: M. Khan *, M. Umair *, K. Shaker *, A. Basit *, * & M. Kashif *
2020 chapter
Introduction
In Topics in Mining, Metallurgy and Materials Engineering (pp. 1–20).
Contributors: * & S. Ahmad *
2020 journal article
Mechanical Properties of Continuous Natural Fibres (Jute, Hemp, Flax) Reinforced Polypropylene Composites Modified with Hollow Glass Microspheres
Fibers and Polymers, 21(9), 2076–2083.
Contributors: H. Awais *, * , A. Anjang *, H. Akil * & M. Abidin *
2020 journal article
Mechanical Response of Novel 3D Woven Flax Composites with Variation in Z Yarn Binding
Journal of Natural Fibers, 17(6), 890–905.
Contributors: M. Jabbar *, * , M. Karahan*, M. Ashraf * & T. Hussain *
2020 book
Mechanical properties of hollow glass microspheres filled jute woven comingled composites
In Key Engineering Materials (pp. 41–46).
Contributors: H. Awais *, * , A. Amjad *, A. Anjang * & M. Abidin *
2020 journal article
Numerical Analysis of Binding Yarn Float Length for 3D Auxetic Structures
Physica Status Solidi (B) Basic Research, 257(10).
Contributors: H. Iftekhar*, R. Ullah Khan *, * , S. Hamdani * & S. Panchal *
2020 journal article
Study of comfort performance of novel car seat design for long drive
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 234(2-3), 645–651.
Contributors: H. Iftekhar*, R. Ullah Khan *, M. Asghar*, A. Qadeer *, M. Umair *, * , S. Hamdani *
2020 journal article
Tailoring the properties of leno woven fabrics by varying the structure
Mechanics of Advanced Materials and Structures, 27(22), 1865–1872.
Contributors: K. Shaker *, * , M. Ayub Asghar*, A. Nasreen * & M. Jabbar *
2020 journal article
The Potential Effect of Dietary Tannins on Enteric Methane Emission and Ruminant Production, as an Alternative to Antibiotic Feed Additives-A Review
Annals of Animal Science, 20(2), 355–388.
Contributors: A. Nawab *, G. Li *, L. An *, * , Y. Zhao *, M. Xiao *, S. Tang*, C. Sun*
2019 journal article
A study on the interdependence of fabric pore size and its mechanical and comfort properties
Journal of Natural Fibers, 16(6), 795–805.
Contributors: A. Rehman*, M. Jabbar *, M. Umair *, * , M. Jabbar* & K. Shaker *
2019 journal article
Development and characterization of jute/polypropylene composite by using comingled nonwoven structures
Journal of the Textile Institute.
Contributors: M. Ameer*, * , Z. Ali *, A. Imad & S. Ahmad *
2019 journal article
Development of composites, reinforced by novel 3D woven orthogonal fabrics with enhanced auxeticity
Journal of Industrial Textiles, 49(5), 676–690.
Contributors: M. Khan *, J. Akram*, M. Umair *, S. Hamda *, K. Shaker *, Y. Nawa *, M. Zeeshan *
2019 journal article
EFFECT OF FABRIC STRUCTURAL DESIGN ON THE THERMAL PROPERTIES OF WOVEN FABRICS
Thermal Science, 2018.
Contributors: K. Shaker *, M. Umair *, M. Jabbar *, D. Baitab *, * , A. Afzal *, S. Ahmad *
2019 journal article
Effect of Pile Height on the Mechanical Properties of 3D Woven Spacer Composites
Fibers and Polymers, 20(6), 1258–1265.
Contributors: M. Umair *, S. Hamdani *, * , M. Asghar*, T. Hussain * & A. Saouab *
2019 journal article
Effect of comingling techniques on mechanical properties of natural fibre reinforced cross-ply thermoplastic composites
Composites Part B: Engineering, 177.
Contributors: H. Awais *, * , A. Amjad *, A. Anjang *, H. Md Akil * & M. Zainol Abidin *
2019 journal article
Effect of interlocking pattern on short beam strength of 3D woven composites
Journal of Composite Materials.
Contributors: M. Kashif *, S. Hamdani *, M. Zubair * & *
2019 journal article
Effect of micro-crystalline cellulose particles on mechanical properties of alkaline treated jute fabric reinforced green epoxy composite
Cellulose, 26(17), 9057–9069.
Contributors: M. Rehman *, M. Zeeshan *, K. Shaker * & *
2019 journal article
Effect of silica nanoparticles on mechanical properties of Kevlar/epoxy hybrid composites
Journal of the Textile Institute, 110(4), 606–613.
Contributors: M. Jabbar *, M. Karahan*, * , M. Ashraf * & T. Hussain *
2019 journal article
Effect of structural hybridization on ballistic performance of aramid fabrics
Journal of Thermoplastic Composite Materials, 32(6), 795–814.
Contributors: M. Karahan*, N. Karahan *, M. Nasir * & *
2019 journal article
Experimental analysis of ILSS of glass fibre reinforced thermoplastic and thermoset textile composites enhanced with multiwalled carbon nanotubes
Journal of Mechanical Science and Technology, 33(1), 197–204.
Contributors: S. Zahid*, M. Nasir, S. Nauman*, M. Karahan*, * , H. Ali *, Y. Khalid*, M. Nabeel*, M. Ullah *
2019 journal article
Fabric manufacturing
Physical Sciences Reviews, 1(7).
2019 journal article
Impact of Capacity Building and Managerial Support on Employees' Performance: The Moderating Role of Employees' Retention
SAGE Open, 9(3).
Contributors: M. Wassem*, S. Baig*, M. Abrar *, M. Hashim *, M. Zia-Ur-Rehman *, U. Awan *, F. Amjad *, *
2019 journal article
Influence of silica fillers on failure modes of glass/vinyl ester composites under different mechanical loadings
Engineering Fracture Mechanics, 218.
Contributors: K. Shaker *, * & A. Saouab *
2019 journal article
Novel derivatives of 3D woven T-shaped composites with improved performance
Journal of the Textile Institute, 110(2), 267–273.
Contributors: M. Ali *, F. Kausar*, S. Shahid *, M. Zeeshan *, * , R. Riaz *, A. Memon*, N. Mengal *, A. Anjum *
2019 journal article
Optimization of 3D woven preform for improved mechanical performance
Journal of Industrial Textiles, 48(7), 1206–1227.
Contributors: M. Kashif *, S. Hamdani *, * , M. Asghar*, M. Umair * & K. Shaker *
2019 journal article
Performance of novel auxetic woven fabrics produced using Helical Auxetic Yarn
Materials Research Express, 6(8).
Contributors: M. Nazir *, K. Shaker *, R. Hussain & *
2019 journal article
Reduction in process-induced shape distortion of C-shaped composite parts using micro silica particles
The International Journal of Advanced Manufacturing Technology.
Contributors: M. Raza *, K. Shaker *, * & A. Saouab *
2019 journal article
Techno-mechanical properties of cocoon, raw silk and filament of two mulberry silkworm (Bombyx mori L.) strains,Technologisch-mechanische Eigenschaften von Kokon, Rohseide und Fasern zweier Seidenspinnerarten (Bombyx mori L.)
Materialwissenschaft Und Werkstofftechnik, 50(10), 1287–1294.
Contributors: G. Bajwa, * , M. Umair * & Z. Rizwan *
2018 journal article
Development & Characterization of Green Composites Using Novel 3D Woven Preforms
Development & Characterization of Green Composites Using Novel 3D Woven Preforms. Applied Composite Materials, 25(4), 747–759.
Contributors: * , M. Kashif *, M. Asghar*, A. Asghar *, M. Umair *, K. Shaker *, M. Zeeshan *
2018 journal article
Development and Comfort Characterization of 2D-Woven Auxetic Fabric for Wearable and Medical Textile Applications
Clothing and Textiles Research Journal, 36(3), 199–214.
Contributors: M. Ali *, M. Zeeshan *, S. Ahmed*, B. Qadir *, * , A. Anjum *, R. Riaz *
2018 journal article
Development and Mechanical Characterization of Weave Design Based 2D Woven Auxetic Fabrics for Protective Textiles
Fibers and Polymers, 19(11), 2431–2438.
Contributors: M. Ali *, M. Zeeshan *, M. Qadir *, R. Riaz *, S. Ahmad *, * , A. Anjum *
2018 book
Development and characterization of hybrid green composites from textile waste
In Advances in Intelligent Systems and Computing (Vol. 606, pp. 37–49).
Contributors: M. Karahan*, Z. Masood*, * & N. Karahan *
2018 journal article
Development and characterization of three-dimensional woven fabric for ultra violet protection
International Journal of Clothing Science and Technology, 30(4), 536–547.
Contributors: A. Nasreen *, M. Umair *, K. Shaker *, S. Hamdani * & *
2018 journal article
Effect of silica particle loading on shape distortion in glass/vinyl ester-laminated composite plates
Journal of the Textile Institute.
Contributors: K. Shaker *, * , A. Saouab *, M. Ashraf * & A. Khan
2018 journal article
Fabrication induced spring-back in thermosetting woven composite parts with variable thickness
Journal of Industrial Textiles, 47(6), 1291–1304.
Contributors: M. Ali *, * , A. Saouab *, A. Anjum * & M. Zeeshan *
2018 journal article
Heat stress in poultry production: Mitigation strategies to overcome the future challenges facing the global poultry industry
Journal of Thermal Biology, 78, 131–139.
Contributors: A. Nawab *, F. Ibtisham *, G. Li *, B. Kieser*, J. Wu *, W. Liu *, Y. Zhao *, *
2018 journal article
Hydrophobic treatment of natural fibers and their composites—A review
Journal of Industrial Textiles, 47(8), 2153–2183.
Contributors: A. Ali *, K. Shaker *, * , M. Jabbar *, T. Hussain *, J. Militky *, V. Baheti *
2018 journal article
Investigation of mechanical properties of auxetic woven polymer composite material: Untersuchung der mechanischen Eigenschaften von auxetisch gewebten Polymer-Verbundwerkstoffen
Materialwissenschaft Und Werkstofftechnik, 49(2), 206–209.
Contributors: M. Hussain *, * , Z. Rizwan *, A. Mumtaz* & A. Basit *
2018 journal article
Mechanical behaviour of hybrid composites developed from textile waste,Ocena właściwości mechanicznych kompozytów hybrydowych wytworzonych z odpadów włókienniczych
Fibres and Textiles in Eastern Europe, 26(1), 46–52.
Contributors: Z. Masood, S. Ahmad *, M. Umair *, K. Shaker *, * & M. Karahan*
2018 journal article
Study of influence of interlocking patterns on the mechanical performance of 3D multilayer woven composites
Journal of Reinforced Plastics and Composites.
Contributors: M. Umair *, S. Hamdani *, M. Asghar*, T. Hussain *, M. Karahan*, * , M. Ali *
2018 journal article
The Potential Role of Probiotics (nutraceuticals) in Gut Health of Domestic Animals; an Alternative to Antibiotic Growth Promoters
Journal of the Hellenic Veterinary Medical Society, 69(4), 1169–1188.
Contributors: A. Nawab *, W. Liu*, G. Li*, F. Ibtisham *, D. Fox*, Y. Zhao *, J. Wu, M. Xiao *, * , L. An *
2017 journal article
A Study on the Twist Loss in Weft Yarn During Air Jet Weaving
Journal of Engineered Fibers and Fabrics. https://publons.com/wos-op/publon/2452966/
2017 journal article
A study on the twist loss in weft yarn during air jet weaving
Journal of Engineered Fibers and Fabrics, 12(4), 1–6. http://www.scopus.com/inward/record.url?eid=2-s2.0-85036662662&partnerID=MN8TOARS
2017 journal article
CHARACTERIZATION AND STATISTICAL MODELLING OF THERMAL RESISTANCE OF COTTON/POLYESTER BLENDED DOUBLE LAYER INTERLOCK KNITTED FABRICS
Thermal Science, 21(6), 2393–2403.
Contributors: A. Afzal *, S. Ahmad *, A. Rasheed *, M. Mohsin *, F. Ahmad * & *
2017 journal article
Characterisation and modelling of thermal expansion coefficient of woven carbon/epoxy composite and its application to the determination of spring-in
Journal of Composite Materials, 51(11), 1527–1538.
Contributors: * , C. Sonnenfeld*, A. Saouab *, R. Agogué* & P. Beauchêne*
2017 journal article
Comparison of compression properties of stretchable knitted fabrics and bi-stretch woven fabrics for compression garments
Journal of the Textile Institute, 108(4), 522–527.
Contributors: M. Maqsood *, * , J. Umar*, M. Umair * & K. Shaker *
2017 journal article
Composite Materials Testing
Advanced Textile Testing Techniques. https://publons.com/wos-op/publon/27557872/
2017 book
Composite materials testing
In Advanced Textile Testing Techniques (pp. 247–270).
2017 book
Conventional woven structures
In Structural Textile Design: Interlacing and Interlooping (pp. 47–83).
2017 journal article
INFLUENCE OF FABRIC PARAMETERS ON THERMAL COMFORT PERFORMANCE OF DOUBLE LAYER KNITTED INTERLOCK FABRICS
Autex Research Journal, 17(1), 20–26.
Contributors: A. Afzal *, S. Ahmad *, A. Rasheed *, F. Ahmad *, F. Iftikhar * & *
2017 journal article
Interdependence of moisture, mechanical properties, and hydrophobic treatment of jute fibre-reinforced composite materials
Journal of the Textile Institute, 108(10), 1768–1776.
Contributors: M. Ameer*, K. Shaker *, M. Ashraf *, M. Karahan*, * , S. Ahmad *, M. Nasir *
2017 journal article
Investigating the effect of material and weave design on comfort properties of bilayer-woven fabrics
Journal of the Textile Institute, 108(8), 1319–1326.
Contributors: M. Nazir *, K. Shaker *, * , M. Fazal*, M. Khan * & M. Umair *
2017 journal article
Investigating the mechanical behavior of composites made from textile industry waste
Journal of the Textile Institute, 108(5), 835–839.
Contributors: M. Umar *, K. Shaker *, S. Ahmad *, * & M. Maqsood *
2017 journal article
Investigation of mechanical behavior of woven/knitted hybrid composites
Journal of the Textile Institute, 108(9), 1510–1517.
Contributors: W. Ashraf *, * , M. Umair *, K. Shaker * & M. Karahan*
2017 journal article
Investigation of multi-layered woven car seatbelts with optimum performance
Industria Textila. https://publons.com/wos-op/publon/990646/
2017 journal article
Investigation of multi-layered woven car seatbelts with optimum performance
Industria Textila, 68(2), 77–82. http://www.scopus.com/inward/record.url?eid=2-s2.0-85020037207&partnerID=MN8TOARS
2017 journal article
Multi-response optimization of mechanical and comfort properties of bi-stretch woven fabrics using grey relational analysis in Taguchi method
Journal of the Textile Institute, 108(5), 794–802.
Contributors: M. Maqsood *, T. Hussain *, N. Ahmad * & *
2017 journal article
Optimizing the performance of woven protective gloves using grey relational analysis
Journal of the Textile Institute, 108(10), 1715–1719.
Contributors: M. Jabbar *, K. Shaker *, M. Umair * & *
2017 journal article
Preparation of conductive polyethylene terephthalate yarns by deposition of silver & copper nanoparticles
Fibres and Textiles in Eastern Europe, 25(5), 25–30.
Contributors: S. Ahmad *, M. Ashraf *, A. Ali *, K. Shaker *, M. Umair *, A. Afzal *, * , A. Rasheed *
2017 journal article
Recycling of warp size materials and comparison of yarn mechanical properties sized with recycled materials and virgin materials
Journal of the Textile Institute, 108(1), 84–88.
Contributors: M. Maqsood *, M. Khan *, K. Shaker *, M. Umair * & *
2017 journal article
Simulation of air bubble’s creation, compression, and transport phenomena in resin transfer moulding
Journal of Composite Materials, 51(29), 4115–4127.
Contributors: B. Aaboud*, A. Saouab * & *
2017 journal article
Simultaneous Optimization of Woven Fabric Properties Using Principal Component Analysis
Journal of Natural Fibers, 14(6), 846–857.
Contributors: M. Umair *, K. Shaker *, N. Ahmad *, M. Hussain *, M. Jabbar * & *
2017 journal article
Study of dynamic compressive behaviour of aramid and ultrahigh molecular weight polyethylene composites using Split Hopkinson Pressure Bar
Journal of Composite Materials, 51(1), 81–94.
Contributors: K. Shaker *, A. Jabbar *, M. Karahan*, N. Karahan * & *
2017 journal article
The development of novel auxetic woven structure for impact applications
Journal of the Textile Institute, 108(7), 1264–1270.
Contributors: M. Liaqat *, H. Samad*, S. Hamdani * & *
2016 journal article
Bioactive woven flax-based composites: Development and characterisation
Journal of Industrial Textiles, 46(2), 549–561.
Contributors: K. Shaker *, M. Ashraf *, M. Jabbar *, S. Shahid *, * , J. Zia *, A. Rehman *
2016 conference paper
Characterization and modelling of spring-in effect on Z-shape composite part
ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials. http://www.scopus.com/inward/record.url?eid=2-s2.0-85018547400&partnerID=MN8TOARS
2016 journal article
Effect of woven fabric structure on the air permeability and moisture management properties
Journal of the Textile Institute, 107(5), 596–605.
Contributors: M. Umair *, T. Hussain *, K. Shaker *, * , M. Maqsood * & M. Jabbar *
2016 book
From the Characterization and Modeling of Cure-Dependent Properties of Composite Materials to the Simulation of Residual Stresses
In Heat Transfer in Polymer Composite Materials: Forming Processes (pp. 157–174).
2016 journal article
From the Characterization and Modeling of Cure-Dependent Properties of Composite Materials to the Simulation of Residual Stresses
Heat Transfer in Polymer Composite Materials: Forming Processes. https://publons.com/wos-op/publon/51749886/
2016 journal article
Modeling and analysis of the creep behavior of jute/green epoxy composites incorporated with chemically treated pulverized nano/micro jute fibers
Industrial Crops and Products, 84, 230–240.
Contributors: A. Jabbar *, J. Militk? *, B. Madhukar Kale *, S. Rwawiire*, * & V. Baheti *
2016 journal article
Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments
Journal of the Textile Institute, 107(3), 307–315.
Contributors: M. Maqsood *, T. Hussain *, M. Malik * & *
2016 journal article
Modeling the effect of weave structure and fabric thread density on the barrier effectiveness of woven surgical gowns
Journal of the Textile Institute, 107(7), 873–878.
Contributors: M. Maqsood *, * , S. Hamdani *, K. Shaker *, M. Umair * & W. Ashraf *
2016 journal article
Modelling the effect of weave structure and fabric thread density on mechanical and comfort properties of woven fabrics
Autex Research Journal, 16(3), 160–164.
Contributors: M. Maqsood *, * , K. Shaker *, M. Umair *, M. Ashraf *, D. Baitab *, S. Hamdani *, S. Shahid *
2016 journal article
Static and dynamic mechanical properties of cotton/epoxy green composites
Fibres and Textiles in Eastern Europe, 24(4), 105–111.
2015 journal article
A Statistical Approach for Obtaining the Controlled Woven Fabric Width
Autex Research Journal, 15(4), 275–279.
Contributors: K. Shaker *, M. Umair *, M. Maqsood *, * , S. Ahmad *, A. Rasheed *, M. Ashraf *, A. Basit *
2015 journal article
Development and characterization of three-dimensional woven-shaped preforms and their associated composites
Journal of Reinforced Plastics and Composites, 34(24), 2018–2028.
Contributors: M. Umair *, * , M. Malik * & K. Shaker *
2015 journal article
Development of 3D woven fabric based pressure switch
Autex Research Journal, 15(2), 148–152.
Contributors: K. Shaker *, * , M. Javaid *, M. Umair * & M. Maqsood *
2015 journal article
Development of seersucker fabrics using single warp beam and modelling of their stretch-recovery behaviour
Journal of the Textile Institute, 106(11), 1154–1160.
Contributors: M. Maqsood *, * , M. Usman Javaid *, K. Shaker * & M. Umair *
2015 journal article
Development of seersucker knitted fabric for better comfort properties and aesthetic appearance
Fibers and Polymers, 16(3), 699–701.
Contributors: W. Ashraf *, * , M. Maqsood *, H. Khan *, H. Awais *, S. Ahmad *, M. Ashraf *
2015 journal article
Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material
Journal of Reinforced Plastics and Composites, 34(24), 2059–2068.
Contributors: A. Ali *, K. Shaker *, * , M. Ashraf *, A. Basit *, S. Shahid *, M. Umair *
2015 journal article
In situ characterization of in-plane chemical shrinkage of thermoset laminated composites using a simple setup
Journal of Reinforced Plastics and Composites, 34(11), 931–938.
Contributors: * , P. Casari *, N. Boyard *, V. Sobotka * & F. Jacquemin *
2015 journal article
In situ deposition of TiO<inf>2</inf> nanoparticles on polyester fabric and study of its functional properties
Fibers and Polymers, 16(5), 1092–1097.
Contributors: M. Khan *, M. Ashraf *, T. Hussain *, A. Rehman *, M. Malik, Z. Raza *, * , Q. Zia *
2015 journal article
Modeling the Residual Stress in Woven Thermoset Composites Parts for Aerospace Applications Using Finite Element Methods
{Amr}, 1099, 32–36.
Contributors: * , C. Park *, A. Saouab *, R. Agogu{\'{e}} & P. Beauch{\^{e}}ne
2015 conference paper
Numerical analysis of self-healing composite materials
Proceedings of 2015 12th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2015, 40–43.
Contributors: M. Jabbar*, * , M. Ashraf * & K. Shaker *
2015 journal article
Prediction of warp and weft yarn crimp in cotton woven fabrics
Journal of the Textile Institute, 106(11), 1180–1189.
Contributors: M. Maqsood *, T. Hussain *, * , K. Shaker * & M. Umair *
2015 journal article
Simulation of coupling filtration and flow in a dual scale fibrous media
Composites Part A: Applied Science and Manufacturing, 76, 272–280.
Contributors: H. Haji*, A. Saouab * & *
2014 journal article
Effect of pressure and reinforcement type on the volume chemical shrinkage in thermoset resin and composite
Journal of Composite Materials, 48(26), 3191–3199.
Contributors: * , N. Boyard * & F. Jaquemin*
2014 journal article
Shape Distortion of Carbon/Epoxy Composite Parts During Fabrication
Macromolecular Symposia, 340(1), 59–64.
Contributors: * , C. Park *, A. Saouab *, R. Agogu\'e*, P. Beauchêne & B. Desjoyaux
2013 journal article
Characterization of the cure shrinkage, reaction kinetics, bulk modulus and thermal conductivity of thermoset resin from a single experiment
Journal of Materials Science, 48(6), 2394–2403.
Contributors: * , P. Casari *, N. Boyard * & F. Jacquemin *
2013 journal article
Chemical shrinkage characterization techniques for thermoset resins and associated composites
Journal of Materials Science, 48(16), 5387–5409.
Contributors: * , S. Shahid *, N. Boyard * & F. Jacquemin *
2013 journal article
Evolution of chemical and thermal curvatures in thermoset-laminated composite plates during the fabrication process
Journal of Composite Materials, 47(3), 327–339.
Contributors: * , F. Jaquemin*, P. Casari *, N. Boyard * & V. Sobotka *
2013 journal article
Study of variation of thermal expansion coefficients in carbon/epoxy laminated composite plates
Composites Part B: Engineering, 50, 144–149.
Contributors: * , F. Jacquemin *, P. Casari *, N. Boyard *, Y. Borjon-Piron* & V. Sobotka *
2012 journal article
Determination and modelling of the cure shrinkage of epoxy vinylester resin and associated composites by considering thermal gradients
Composites Science and Technology, 73(1), 81–87.
Contributors: * , X. Tardif *, N. Boyard *, V. Sobotka *, P. Casari * & F. Jacquemin *
2012 journal article
Measurement and modelling of chemical shrinkage of thermoset composites
Key Engineering Materials, 504-506, 1129–1134.
Contributors: * , N. Boyard *, V. Sobotkat, P. Casari * & F. Jaquemin
2012 book
Shape evolution of carbon epoxy laminated composite during curing
In Key Engineering Materials (Vol. 504-506, pp. 1145–1150).
Contributors: * , F. Jaquemin, P. Casari *, N. Boyard * & V. Sobotka *
2012 journal article
Study of changes in 3D-woven multilayer interlock fabric preforms while forming
Journal of the Textile Institute, 103(12), 1273–1279.
Contributors: * , X. Legrand * & V. Koncar *
2011 journal article
A device to measure the shrinkage and heat transfers during the curing cycle of thermoset composites
Advanced Materials Research, 326, 19–28.
Contributors: * , N. Boyard *, V. Sobotka *, P. Casari * & F. Jacquemin *
Employment
Updated: July 14th, 2023 09:42
2023 - present
2018 - 2023
2013 - 2018
2012 - 2013
Education
Updated: July 25th, 2014 11:46
2010 - 2012